Presently the option guards both direct and accelerated indirect GLX. As
such when one toggles it off they end up without any acceleration.
Remove the option all together until we have the time to split/rework
things.
Cc: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The option is misleading and using it leads to disabling both direct and
accelerated indirect GLX. In such cases the xserver GLX attempts to
match DRISW (IGLX) configs with the DRI2/3 ones (direct GLX) leading to
all sorts of fun experience.
Remove the option until we get a clear split and control over direct vs
indirect GLX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This change effectively reverts commit 074cf58. We were falling back from
drmModeSetCursor2() to drmModeSetCursor() whenever the first failed. This
fall-back only makes sense on pre-mid-2013 kernels which implemented the
cursor_set hook but not cursor_set2, and in this case the call to
drmModeSetCursor2() will always return -EINVAL. Specifically, a return
value of -ENXIO usually means that neither are supported.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
[hdegoede@redhat.com: initialize ret to -EINVAL]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We get multiple udev events for actions like docking a laptop into its
station or plugging a monitor to the station. By consuming as much
events as we can, we reduce the number of output re-evalutions.
I.e. having a Lenovo X250 in a ThinkPad Ultra Dock and plugging a
monitor to the station generates 5 udev events. Or having 2 monitors
attached to the station and docking the laptop generates 7 events.
It depends on the timing how many events can consumed at once.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
[hdegoede@redhat.com: Keep goto out so that we always call RRGetInfo()]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This fix is for the following xorg.conf can work:
Section "ServerFlags"
Option "AutoAddGPU" "off"
EndSection
Section "Device"
Identifier "Amd"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Intel"
Driver "modesetting"
BusID "pci:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel"
GPUDevice "Amd"
EndSection
Without AutoAddGPU off, modesetting DDX will also be loaded
for GPUDevice.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new platform bus code and the old PCI bus code overlap. Platform bus
can handle any type of device, including PCI devices, whereas the PCI code
can only handle PCI devices. Some drivers only support the old style
PCI-probe methods, but the primary device detection code is server based,
not driver based; so we might end up with a primary device which only has
a PCI bus-capable driver, but was detected as primary by the platform
code, or the other way around.
(The above paragraph was shamelessly stolen from Hans de Goede, and
customized.)
The latter case applies to QEMU's virtio-gpu-pci device: it is detected as
a BUS_PCI primary device, but we actually probe it first (with the
modesetting driver) through xf86platformProbeDev(). The
xf86IsPrimaryPlatform() function doesn't recognize the device as primary
(it bails out as soon as it sees BUS_PCI); instead, we add the device as a
secondary graphics card under "autoAddGPU". In turn, the success of this
automatic probing-as-GPU prevents xf86CallDriverProbe() from proceeding to
the PCI probing.
The result is that the server exits with no primary devices detected.
Commit cf66471353 ("xfree86: use udev to provide device enumeration for
kms devices (v10)") added "cross-bus" matching to xf86IsPrimaryPci(). Port
that now to xf86IsPrimaryPlatform(), so that we can probe virtio-gpu-pci
as a primary card in platform bus code.
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=93675
Signed-off-by: Kyle Guinn <elyk03@gmail.com>
[hdegoede@redhat.com: Simplify by adding 2 if conds together with &&]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A couple of memory leaks fixes and avoiding bit shifting on an
unitialized value.
[hdegoede@redhat.com: Split out some non free fixes in separate patches]
[hdegoede@redhat.com: Don't touch ancient (and weird) os/rpcauth.c code]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
dropped the providing of a pScrn->ChangeGamma callback from the xf86RandR12
code. Leaving pScrn->ChangeGamma NULL in most cases.
This triggers the BadImplementation error in xf86ChangeGamma() :
if (pScrn->ChangeGamma)
return (*pScrn->ChangeGamma) (pScrn, gamma);
return BadImplementation;
Which causes X-apps using XF86VidModeSetGamma to crash with a
X protocol error.
This commit fixes this by re-introducing the xf86RandR12ChangeGamma
helper removed by the commit and adjusting it to work with the new
combined palette / gamma code.
Fixes: b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is a preparation patch to allow easier usage of init_one_component
outside of xf86RandR12CrtcInitGamma.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
When using secondary GPU outputs the primary GPU's blockhandler
will copy changes from its framebuffer to a pixmap shared with the
secondary GPU.
In reverse prime setups the secondary GPU's blockhandler will do another
copy from the shared pixmap to its own framebuffer.
Before this commit, if the primary GPU's blockhandler would run after
the secondary GPU's blockhandler and no events were pending, then the
secondary GPU's blockhandler would not run until some events came in
(WaitForSomething() would block in the poll call), resulting in the
secondary GPU output sometimes showing stale contents (e.g. a just closed
window) for easily up to 10 seconds.
This commit fixes this by setting the timeout passed into the
blockhandler to 0 if any shared pixmaps were updated by the primary GPU,
forcing an immediate re-run of all blockhandlers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
When using reverse prime we do 2 copies, 1 from the primary GPU's
framebuffer to a shared pixmap and 1 from the shared pixmap to the
secondary GPU's framebuffer.
This means that on the primary GPU side the copy MUST be finished,
before we start the second copy (before the secondary GPU's driver
starts processing the damage on the shared pixmap).
This fixes secondary outputs sometimes showning (some) old fb contents,
because of the 2 copies racing with each other, for an example of
what this looks like see:
https://fedorapeople.org/~jwrdegoede/IMG_20160915_130555.jpg
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes XRRGetOutputPrimary and xrandr not reporting a primary output after
startup. This was especially confusing when an output was explicitly
marked as primary using Option "Primary" in Section "Monitor".
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Move ms_flush_drm_events out of GLAMOR ifdef.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97586
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes glxgears running at 1 fps when fully covering a slave-output
and the modesetting driver is used for the master gpu.
Reported-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
99% of the code in ms_covering_crtc is video-driver agnostic. Add a
screen_is_ms parameter when when FALSE skips the one ms specific check,
this will allow calling ms_covering_crtc on slave GPUs.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implement the CreateBuffer2 / DestroyBuffer2 / CopyRegion2 DRI2InfoRec
version 9 callbacks, this is necessary for being an offload source
provider with DRI2.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If a frontbuffer drawable already has a pixmap, make sure it was created
on the right screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently with PRIME if we detect a secondary GPU,
we switch to using SW cursors, this isn't optimal,
esp for the intel/nvidia combinations, we have
no choice for the USB offload devices.
This patch checks on each slave screen if hw
cursors are enabled, and also calls set cursor
and move cursor on all screens.
Cc: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
When a slave-output is rotated the transformation is done on the blit
from master to slave GPU, so crtc->transform_in_use is not set, but we
still need to adjust the mouse position for things to work.
This commit modifies xf86_crtc_transform_cursor_position to not rely
on crtc->f_framebuffer_to_crtc, so that it can be used with GPU screens
too and always calls it for crtcs with any form of rotation.
Note not using crtc->f_framebuffer_to_crtc means that crtc->transform
will not be taken into account, that is ok, because when we've a transform
active hw-cursors are not used and xf86_crtc_transform_cursor_position
will never get called.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
xf86_crtc_rotate_coord should be the exact inverse operation of
xf86_crtc_rotate_coord_back, but when calculating x / y for 90 / 270
degrees rotation it was using height to calculate x / width to calculate y,
instead of the otherway around.
This was likely not noticed before since xf86_crtc_rotate_coord
until now was only used with cursor_info->MaxWidth and
cursor_info->MaxHeight, which are usally the same.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The CurrentCursor is always attached to the master GPU.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The "if (pixmap) ..." block this commit removes is inside an
"if (pixmap == NULL) ..." block, so it will never execute.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Remove unused arguments from ms_covering_crtc, make it static as it is
only used in vblank.c.
While at it also change its first argument from a ScrnInfoPtr to a
ScreenPtr, this makes the next patch in this patch-set cleaner.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
glamor_fd_from_pixmap() may return a tiled bo, which is not suitable
for sharing with another GPU as tiling usually is GPU specific.
Switch to glamor_shareable_fd_from_pixmap(), which always returns a
linear bo. This fixes mis-rendering when running the mode setting
driver on the master gpu in a dual-gpu setup and running an opengl
app with DRI_PRIME=1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The common page flip handle framework can be shared with DRI2
page flip.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When Xorg gets started directly from a wayland-gdm the crtc still has the
wayland hw cursor set. Combine this with Xorg immediately falling back to
a sw cursor because a slave-output has a monitor attached at startup; and
we end up with the wayland hardware cursor overlay fixed in its last
position + the Xorg sw cursor resulting in 2 cursors.
This commit fixes this by hiding any left-over cursors when initializing
the crtc.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The modesetting driver may be driving 2 screens (slave and master
gpu), which may have different behavior wrt hardware cursor support.
So stop using static variables and instead store the hw-cursor support
related data in a per screen struct. While at it actually make it per
crtc data as in theory different crtc's could have different hw-cursor
support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
We're happily printing the error to stdout but not which module caused it...
That's in the Xorg.log but that's at least one click away.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Xorg -configure relies on the bus implementation, e.g.
xf86pciBus.c to call xf86AddBusDeviceToConfigure(). The new
xf86platformBus code does not have support for this.
Almost all drivers support both the xf86platformBus and xf86pciBus
nowadays, and the generic xf86Bus xf86CallDriverProbe() function
prefers the new xf86platformBus probe method when available.
Since the platformBus paths do not call xf86AddBusDeviceToConfigure()
this results in Xorg -configure failing with the following error:
"No devices to configure. Configuration failed.".
Adding support for the xf86Configure code to xf86platformBus.c
is non trivial and since we advise users to normally run without
any Xorg.conf at all not worth the trouble.
However some users still want to use Xorg -configure to generate a
template config file, this commit implements a minimal fix to make
things work again for PCI devices by skipping the platform
probe method when xf86DoConfigure is set.
This has been tested on a system with integrated intel graphics,
with both the intel and modesetting drivers and restores Xorg -configure
functionality on both cases.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This loop was written in a buggy style, causing a NULL driver ptr to be
passed to copyScreen(). copyScreen() only uses that to generate an
identifier string, so this is mostly harmless on systems that accept
NULL for asprintf() "%s" format. (the generated identifiers are off
by one wrt the driver names and the last one contains NULL.
For systems that don't accept NULL for '%s' this would cause a
segmentation fault when this code is used (no xorg.conf, but partial
config in xorg.conf.d for instance).
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Keith Packard <keithp@keithp.com>
In function xf86VGAarbiterScrnInit when the "pEnt->bus.type" is
BUS_PLATFORM, the "pScrn->vgaDev" won't be set, so the "pScrn->vgaDev" is
equal to zero.
The variable "rsrc_decodes" in function "xf86VGAarbiterAllowDRI" is not
initialized. So it will occur error when "pScrn->vgaDev == 0", and
"vga_count > 1". For this case, as "pScrn->vgaDev == 0", the function
"pci_device_vgaarb_get_info" will only set the value of "vga_count",
but won't set the value of "rsrc_decodes", so it will has two different
return values for function "xf86VGAarbiterAllowDRI" in different
platforms. One platform will return TRUE, as the "rsrc_decodes" 's
default value is 0, but another platform will return FALSE, as the
"rsrc_decodes" 's default value is "32767", this will cause disable
direct rendering.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96937
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Any code called from the driver ScreenInit may want to refer to
pScrn->pScreen. As the function passed to AddScreen is the first place
the DDX sees a new screen, the generic code needs to make sure that
value is set before passing control to the video driver's
initialization code.
This was found by running a driver which didn't bother to set this
value when the initial colormap was installed; xf86RandR12LoadPalette
tried to use pScrn->pScreen and crashed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97124
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
This is a problem for the libinput driver that uses the same context across
multiple devices. The driver may be halfway through setting up an input device
(and the only way to do so is to add it to libinput) when the input thread
comes in an reads events. This then causes mayhem when data is dereferenced
that hasn't been set up yet.
In my case the cause was the call to libinput_path_remove_device() inside
preinit racing with evdev_dispatch_device() handling of ENODEV. The sequence
was:
- thread 2 gets an event and calls evdev_dispatch_device()
- thread 1 calls libinput_path_remove_device() which sets the device->source
to NULL
- thread 2 reads from the fd, gets ENODEV and now removes the device->source,
dereferencing the null-pointer
This is the one I could reproduce the most, but there are other potential
pitfalls that affect any driver that uses the same fd for multiple devices.
Avoid all this and wrap PreInit into the lock.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If a device couldn't be enabled we left the lock hanging.
This patch also removes the leftover OsReleaseSignals() call, now unnecessary.
Note that input_unlock() is later than previously OsReleaseSignals().
RemoveDevice() manipulates the input device and its file descriptors, it's
safer to put the input_unlock() call after RemoveDevice() to avoid events
coming in while the device is being removed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Just use the RandR gamma ramp directly.
Fixes random on-monitor colours with drivers which don't call
xf86HandleColormaps, e.g. modesetting.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97154
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Embarassingly, it looks like I introduced this dead function in
commit 13c7d53df8 a year ago.
Nothing ever used it, not even then.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Instead of breaking the former when the driver supports the latter,
hook them up so that the hardware LUTs reflect the combination of the
current colourmap and gamma states. I.e. combine the colourmap, the
global gamma value/ramp and the RandR 1.2 per-CRTC gamma ramps into one
combined LUT per CRTC.
Fixes e.g. gamma sliders not working in games.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27222
v2:
* Initialize palette_size and palette struct members, fixes crash on
server startup.
v3:
* Free randrp->palette in xf86RandR12CloseScreen, fixes memory leak.
v4:
* Call CMapUnwrapScreen if xf86RandR12InitGamma fails (Emil Velikov).
* Still allow xf86HandleColormaps to be called with a NULL loadPalette
parameter in the xf86_crtc_supports_gamma case.
v5:
* Clean up inner loops in xf86RandR12CrtcComputeGamma (Keith Packard)
* Move palette update out of per-CRTC loop in xf86RandR12LoadPalette
(Keith Packard)
v6:
* Handle reallocarray failure in xf86RandR12LoadPalette (Keith Packard)
Reviewed-by: Keith Packard <keithp@keithp.com>
This would normally return the same values the core RandR code passed to
xf86RandR12CrtcSetGamma before, which is rather pointless. The only
possible exception would be if a driver tried initializing
crtc->gamma_red/green/blue to reflect the hardware LUT state on startup,
but that can't work correctly if whatever set the LUT before the server
started was running at a different depth.
Even the pointless round-trip case will no longer work with the
following change.
Reviewed-by: Keith Packard <keithp@keithp.com>
RRCrtcGammaSetSize cannot be used yet in xf86InitialConfiguration,
because randr_crtc isn't allocated yet at that point, but a following
change will require RRCrtcGammaSetSize to be called from
xf86RandR12CrtcInitGamma.
v2:
* Bail from xf86RandR12CrtcInitGamma if !crtc->funcs->gamma_set (Keith
Packard)
Reviewed-by: Keith Packard <keithp@keithp.com>
This uses the wrapper in case we need to emulate poll with select
as we do on Windows.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ATTR_KEY maps to ID_INPUT_KEY which is set for any device with keys.
ID_INPUT_KEYBOARD and thus ATTR_KEYBOARD is set for devices that are actual
keyboards (and have a set of expected keys).
Hand-written match rules may only apply ID_INPUT_KEYBOARD, so make sure we
match on that too.
Arguably we should've been matching on ATTR_KEYBOARD only all along but
changing that likely introduces regressions.
Reported-by: Marty Plummer <netz.kernel@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This error code can mean we're submitting more rects at once than the
driver can handle. If that happens, resubmit one at a time.
v2: Make the rect submit loop more error-proof (Walter Harms)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michael Thayer <michael.thayer@oracle.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>