The screen pixmap doesn't receive updates while there's a Present flip
window.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Currently if modesetting ever fails to set a hardware cursor it will switch
to using a software cursor and never go back. Change this to only
permanently switch to a software cursor if -ENXIO is returned (which means
hardware cursors not supported), and to otherwise still try a hardware
cursor first every time a new one is set. This is needed because hardware
may be able to handle some cursors in hardware and others not, or virtual
hardware may be able to handle hardware cursors at some times and not
others.
Changes since v1, v2 and v3:
* take into account the switch to load_cursor_argb_check
* keep the permanent software cursor fall-back if -ENXIO is returned
* move parts of v3 into separate patches
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5:
- Removed parts of patch already committed as part of 14c21ea1.
- Adjusted code slightly to match surrounding code.
- Effectively reverted af916477 which is made unnecessary by this patch.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5: Updated the patch to apply to current git HEAD, split up into two
patches (server and modesetting driver) and adjusted the code slightly
to match surrounding code. I also removed the new exported function
ShowCursorCheck(), as instead just changing ShowCursor() to return Bool
should not affect its current callers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
xf86RecolorCursor() may be called directly from XRecolorCursor as well
as from xf86ScreenSetCursor(). In the latter case, the input lock is
already held, but not for the former and so we need to add a wrapper
function that acquires the input lock before performing
xf86RecolorCursor()
References: https://bugs.freedesktop.org/show_bug.cgi?id=99358
This prevents the tearing of moving window in a composite WM
desktop when output slave is attached but none of its crtc is
really active.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This can happen when a module fails to load:
Program received signal SIGSEGV, Segmentation fault.
UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
848 name = mod->VersionInfo->modname;
(gdb) bt
#0 UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
#1 0x00005555555ddd1b in LoadModule (module=module@entry=0x5555559c7ce0 "fbdev", options=0x0, modreq=modreq@entry=0x0, errmaj=errmaj@entry=0x7fffffffe8ec) at ../../../../hw/xfree86/loader/loadmod.c:824
#2 0x00005555555edfe9 in xf86LoadModules (list=list@entry=0x5555559dcf50, optlist=optlist@entry=0x0) at ../../../../hw/xfree86/common/xf86Init.c:1506
#3 0x00005555555ee7bc in InitOutput (pScreenInfo=pScreenInfo@entry=0x5555559abf80 <screenInfo>, argc=argc@entry=4, argv=argv@entry=0x7fffffffeb18) at ../../../../hw/xfree86/common/xf86Init.c:484
#4 0x00005555555a885c in dix_main (argc=4, argv=0x7fffffffeb18, envp=<optimized out>) at ../../dix/main.c:197
#5 0x00007ffff5d582b1 in __libc_start_main (main=0x555555593130 <main>, argc=4, argv=0x7fffffffeb18, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffeb08) at ../csu/libc-start.c:291
#6 0x000055555559316a in _start ()
Fixes: 8e83eacb9e ("loader: Remove unused path and name from ModuleDescPtr")
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
V2:
1. update comment
2. check bustype if PCI
3. configure add libdrm version check for drmGetDevice
Get PCI information from info->fd with drmGetDevice instead of
assuming the info->fd is the first entity of scrn which is not
true for multi entities scrn.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Classic GNU ld resolves symbol dependencies only forward, while GOLD
seems to work regardless of the specified library order.
Suggested-by: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Mihail Konev <k.mvc@ya.ru>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Just a waste of memory. Path was never referenced at all, and name was
only used when unloading the module; we can just as well get the
module's internal idea of its name from VersionInfo.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Nobody was ever calling this with a non-null argument for subdir list or
pattern list. Having done this, InitSubdirs is only ever called with a
NULL argument, so it's really just a complicated way of duplicating the
default list; we can remove that and just walk the list directly.
The minor error code was only ever used to distinguish among two cases
of LDR_BADUSAGE. Whatever.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Callers only ever use this for a single directory anyway.
While we're at it, also move xf86DriverListFromCompile near its only
user in the X -configure code (and inline it out of existence), and
remove LoaderFreeDirList as it's unused (since X -configure is just
going to exit anyway, none of that code cares about cleanup).
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There's no reason a driver should ever care about this.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
indent(1) gets confused by function-like macros with no trailing
semicolon, which is fair enough really.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The idea here is that the driver might have once been old enough to not
have the driverFunc slot in DriverRec, with the module ABI not having
changed when it was added. That was ages ago, and drivers always declare
themselves with DriverRec not DriverRec1, so uninitialized slots will
simply be zero.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Everybody using this functionality specifies a major version, which
makes sense. If you don't care about a minor version, that's equivalent
to saying you require minor >= 0, so just say so; likewise patch level.
Likewise ABI class is always specified.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The enum has been unused since at least the removal of elfloader.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This looks like more, but only if you don't compare it to the number
pulled in by misc.h.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This API is dumb. uname(3) exists, feel free to use it, but ideally
write to the interface not to the OS. There are a couple of drivers
using this API, they could all reasonably just not.
This also removes the OS name from the loader subdirectory path search.
Having /usr/lib/xorg shared across OSes is a non-goal here.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Now that users can set the path only via LoaderSetPath(), we can simplify
things.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Afaics the argument hasn't been part of the API since the documentation
has been converted to xml with commit fc6ebe1e1d "Convert LinuxDoc
documents to DocBook/XML"
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Similar to its little brother - LoadSubModule. Currently all call sites
provide NULL anyway ;-)
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Should you find yourself using a 16bpp display while also using a
compositor, you poor soul, you may find that your GLX applications
behave strangely; in particular, glxgears will be transparent. This is
because it clears to (0,0,0,0) which is transparent if you honor alpha,
and it will choose the synthetic visual because it has the most
available r/g/b bits.
To avoid this, bump synthetic visuals to a higher (less-preferred)
select group. Unless the client explicitly asks for non-zero alpha bits,
this will prefer any rgb565 visual ahead of the argb8888 visual.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We already send this for fbconfigs. Mesa happens to implement
glXChooseVisual relative to the fbconfig data, but that might not be
true of NVIDIA's libGL.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This comment is above compIsAlternateVisual, which used to be the only
thing determining whether implicit redirect was needed. It's not anymore
due to the redirection exception list. That job is now performed by
compImplicitRedirect, whose code is self-explanitory.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When selecting "CA_TWO_PASS" in glamor_composite_clipped_region() when
the hardware does not support "GL_ARB_blend_func_extended", we call
glamor_composite_choose_shader() twice in a row, which in turn calls
glamor_pixmap_ensure_fbo().
On memory pixmaps, the first call will set the FBO and the second one
will fail an assertion in glamor_upload_picture_to_texture() because
the FBO is already set.
Bail out earlier when the mask pixmap is in memory and the hardware
capabilities would require to use two pass, so that the assertion is not
failed and the rendering is correct.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99346
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part of refactoring the tests into a single binary,
to make partial rebuild slightly faster and less verbose.
Prepares for joining test/xi2/protocol-* into a single binary.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
