Whatever problem this is trying to fix, we don't care. Just include the
thing and stop worrying about whether _POSIX_SOURCE is defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Use conf_data outside of include/ to avoid re-running detection of the
same functions.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Peter Harris <pharris@opentext.com>
Include dix-config.h first to pick up _GNU_SOURCE so we get the
definition for sigset_t.
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Test to build xserver_poll.c was inverted compared to autoconf. Build
xserver_poll.c if poll is missing.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
This makes sure the server will go look at the client again, notice
that the FD is no longer valid and close the client down.
Bugzilla: https://bugs.freedesktop.org/100863
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
There are three copies of the same short sequence of operations to
close down a client when a write error occurs. Create a new function,
AbortClient, which performs these operations and then call it from the
three places.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
This is all just stuff we wish we had in libc, and some of this gets
used in eg. the dmx utilities build, so split it to its own library to
avoid pulling in xserver stuff.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Without this, assertion failures can make life hard for users and those
trying to help them.
v2:
* Change commit log wording slightly to "can make life hard", since
apparently e.g. logind can alleviate that somewhat.
* Set default handler for SIGABRT in
hw/xfree86/common/xf86Init.c:InstallSignalHandlers() and
hw/xquartz/quartz.c:QuartzInitOutput() (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The clever pointer tricks were actually not working, and we were doing
the byte-by-byte moves in general. By just doing the memcpy and
obvious byte swap code, we end up generating actual byte swap
instructions, thanks to optimizing compilers.
text data bss dec hex filename
before: 2240807 51552 132016 2424375 24fe37 hw/xfree86/Xorg
after: 2215167 51552 132016 2398735 249a0f hw/xfree86/Xorg
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
timingsafe_memcmp.c:21:1: warning: no previous prototype for ‘timingsafe_memcmp’ [-Wmissing-prototypes]
timingsafe_memcmp(const void *b1, const void *b2, size_t len)
Signed-off-by: Adam Jackson <ajax@redhat.com>
- typo in #ifdef check
- also need to add AC_CHECK_FUNCS([arc4random_buf])
Reported-by Eric Engestrom. Thanks
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
And the current code for MitToId has a use-after-free() issue.
[Also remove the actual implementations - ajax]
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Provide the function definition for systems that don't have it.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The input thread should generate events, not send them. Make it easier to
find the instances where it's doing so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes a regression from
commit 41da295eb5
Author: Keith Packard <keithp@keithp.com>
Date: Sun Nov 3 13:12:40 2013 -0800
Trap SIGBUS to handle truncated shared memory segments
that causes the SIGBUS handler to fail to chain up correctly and
corrupts nearby memory instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
==8734== Thread 2 InputThread:
==8734== Conditional jump or move depends on uninitialised value(s)
==8734== at 0x2FDB05: InputThreadDoWork (inputthread.c:333)
==8734== by 0x6924423: start_thread (pthread_create.c:333)
==8734== by 0x6C229BE: clone (clone.S:105)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Remove leftover from commit e10ba9e, MAX_TIMES_PER is not used anymore.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Solaris 11.3.5 introduced support for /proc/pid/cmdline, so try it
first, and if we can't open it, then fallback to /proc/pid/psinfo
as we did before.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
A client which is attended while a grab is blocking execution of its
requests needs to be placed in the saved_ready_clients list so that it
will get scheduled once the grab terminates. Otherwise, if the client
never sends another request, there is no way for it to be placed in
the ready_clients list.
v2: Wrap comment above mark_client_saved_ready.
Remove test for OS_COMM_IGNORED which will always be true.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99333
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes a regression introduced in 0b2f30834b. If a driver posts input
events during a timer function (wacom and synaptics do this during tap
timeouts), ProcessInputEvents() is not called for these events. There are no
new events on any fds, so the events just sit in the queue waiting for
something else to happen.
Fix this by simply returning 0 from check_timers if we ran at least one of
them or reset them all. This way the callers ospoll_wait will exit and
continue with normal processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The custom os/os.O library reuses *.o files of os/libos.la.
The current rule assumes automake puts all the objects into per-target
am__*_la_OBJECTS variable. At least with AC_REPLACE_FUNCS, this no
longer holds (as wanted objects are put into LTLIBOBJS instead).
Depend on automake's result, the *.la library instead, to express demand
of any its dependencies being built.
Should be fixing randomly occuring "undefined reference to `strlcpy'"
errors when linking Xvfb and other DDX-es that could use os.O.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
If a work proc wakes up a sleeping client and it is ready to execute,
we need to re-compute the local 'are_ready' value before deciding
what timeout value to use in WaitForSomething.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98030
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
On Linux, setting the main thread's name changes the program name
(/proc/self/comm). Setting it to MainThread breaks scripts that rely on
the command name, e.g. ps -C Xorg.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When putting a device node into a poll-request list, do not overwrite a
"please-remove" element with the same fd, so that a closed device file
is ospoll_remove'd prior to being ospoll_add'ed.
Before, the opposite order was possible, resulting in ospoll_add
considering the newly opened file being already polled, should it have a
fd for which the "please-remove" has not been procesed yet. In this
case, no further events would be seen from the device.
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Regressed-in: 52d6a1e832
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97880
Patchwork: https://patchwork.freedesktop.org/patch/113763/
Hit-and-Reduced-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-and-Reduced-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When a client is marked as write blocked, clear any old 'write ready'
bit in the osfds structure so that a new indication of write ready
(which is marked as edge trigggered) will trigger the callback.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Matthieu Herrb <matthieu@herrb.eu>
When a client with pending output is ready (has request data pending),
FlushAllOutput will skip it to get all of the requests processed
before sending any queued output. That means FlushAllOutput is going
to return with some output pending to a client which isn't known to be
write blocked. And that means NewOutputPending needs to be set so that
FlushAllOutput will get called again to actually go flush this client.
It might be interesting to try just flushing the client to send any
queued data along the way. This patch just restores the server
behavior to what it was before the ospoll changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Matthieu Herrb <matthieu@herrb.eu>
Autoconf logic borrowed from glib
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
If RTLD_DI_SETSIGNAL is set to let us turn runtime linker/loader errors
into catchable signals, then we should only show the errors when catching
that signal, instead of tossing out red herrings to distract people with
unrelated crashes long after their last failed symbol lookup (especially
when using drivers built to support multiple API's by checking which
symbols are available before calling them).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
O_CLOEXEC is not a file bit. It is not setable with F_SETFL. One must
use it when calling open(2). To set it cloexec on an existing fd,
F_SETFD and FD_CLOEXEC must be used.
This also fixes a build failure regression on configurations that don't
have O_CLOEXEC defined.
cf: http://pubs.opengroup.org/onlinepubs/9699919799/functions/fcntl.html
Regressed-in: 30ac756798
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
This change has two effects:
1. Only calls FlushCallbacks when we're actually flushing data to a
client. The unnecessary FlushCallback calls could cause significant
performance degradation with compositing, which is significantly
reduced even without any driver changes.
2. By passing the ClientPtr to FlushCallbacks, drivers can completely
eliminate unnecessary flushing of GPU commands by keeping track of
whether we're flushing any XDamageNotify events to the client for
which the corresponding rendering commands haven't been flushed to
the GPU yet.
Reviewed-by: Adam Jackson <ajax@redha.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
If a file descriptor is added or removed from an ospoll callback, then
the arrays containing file descriptor information will have all of
their indices changed, so the loop state is no longer consistent. Just
bail out and let the caller come back around to try again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of freeing the struct ospollfd elements when the fd is
removed by the user, delay that until epoll is idle so that we are
sure no epoll_event structures could contain the stale pointer. This
handles cases where an fd is removed from the ospoll callback
interface, and also in case the OS keeps stale pointers around after
the call to epoll_ctl with EPOLL_CTL_DEL.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Calling InputThreadRegisterDev twice with the same fd should replace
the existing function and args instead of creating a new entry with
the same fd.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86AddEnabledDevice() prepends the new fd to the list,
xf86RemoveEnabledDevice() then searches for a matching fd and removes that
entry. If this is done for the same fd (and since we lose all information but
the actual fd) we usually unregister virtual devices in reverse order, causing
a dereference of already released memory.
Case in point:
- the wacom driver calls xf86AddEnabledDevice() once for the physical device,
then multiple times for the virtual subdevices
- when the physical device is unplugged, the driver calls
xf86RemoveEnabledDevice() for the physical device
- all we have is the fd, so we end up removing the last virtual device from
the fd set
- xf86DeleteInput() frees the physical device's pInfo
- the fd goes crazy with ENODEV, but a read_input() now passes the already
freed pInfo for the physical device
- boom
Fix this by appending to the fd list to provide bug-for-bug compatibility with
the old SIGIO code. This needs to be fixed in the driver, but meanwhile not
crashing the server provides for better user experience.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Do all timer stuff before blocking, avoiding a bunch of duplicate code
and merge common code in WaitForSomething.
The WaitForSomething changes need a bit of explanation to show that
the new code is effectively equivalent to the old. Eliding error
checking and trivial bits we've got:
Before:
if (ready clients)
timeout = 0
else
compute timeout
i = poll
if (i <= 0) {
if (ready clients)
return TRUE;
if (input)
return FALSE;
if (any ready timers) {
run timers
return FALSE;
}
} else {
if (input)
return FALSE;
if (any ready timers) {
run timers
return FALSE;
}
if (ready clients)
return TRUE;
}
After:
if (ready clients)
timeout = 0;
else
compute timeout
run_timers
poll
if (input)
return FALSE;
if (ready clients)
return TRUE;
The old code would return TRUE if there were ready clients and input
pending. Dispatch would then schedule that ready client, but before
processing any requests, it would notice that there was input pending
and go process it. The new code just checks for input first, which is
effectively the same.
If the poll timed out and there weren't clients ready, then timers
would get run.
If the poll didn't time out, then timers would get run, even if there
were clients now ready. Now, if the timeout interval was zero, that
means that the timers must have been ready *before* poll was
invoked. In this case, we should simply run the timers before calling
poll -- no sense calling poll just to discard any data that it
generates.
If the timeout interval was non-zero, and poll didn't timeout, then
either there aren't any timers to run, or we got a surprise and hit a
timer exactly as a client became ready to run. This is the one case
where the new code is different from the old; the new code delays the
timer call until the next time WaitForSomething is called.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
No sense having an open-coded linked list here, plus the doubly linked
list is more efficient
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
poll provides per-fd notification of failure, so we don't need
CheckConnections anymore.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There's no reason to close these now that we don't care what file
descriptors we use.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There's no reason not to offer ridiculous numbers of clients; only a
few static data structures are arrays of this length.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With no code depending on the range of file descriptors, checking
for that can be eliminated.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Replace use of select(2) to avoid fd limits. Note that
InputThreadFillPipe used select as well, but none of the files passed
were non-blocking, so there was no need for that code at all.
v2: Keep ospoll API usage single threaded to avoid re-entrancy issues
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Eliminates all of the fd_set mangling in the server main thread
v2: Listen for POLLOUT while writes are blocked.
v3: Only mark client not ready on EAGAIN return from read
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This converts the dispatch loop into using a list of ready clients
instead of an array. This changes the WaitForSomething API so that it
notifies DIX when a client becomes ready to read, instead of returning
the set of ready clients.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This provides a wrapper around poll or epoll providing a
callback-based interface for monitoring activity on a large set of
file descriptors.
v2: use xserver_poll API instead of poll. Don't use WSAPoll as
that is broken.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
