If both devices are synchronously grabbed, first with a GrabPointer, then
with a GrabKeyboard (GrabModeSync on both), sync.other of each device points
to the grab of the respective other device.
If the keyboard is then thawed through a AllowSome request, the VCK's
sync.other is reset to NULL. Subsequently, an event on the VCP would crash
the server when dereferencing sync.other on the VCP.
The check's purpose is to compare if the other device is grabbed by the same
client, which should be checked by accessing (dev->deviceGrab->grab->resource).
A check of the server-1.3 sources confirms that.
XTS test case: Xlib13 XAllowEvents 20.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=27510 .
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The GenericEvent is a core event, we never send an extension event, so
don't reserve an id for one.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
They've been implemented for a while, but we never advertised them. All we
need to do is set the GLX_PBUFFER_BIT in the drawable type fbconfig
field when we're using DRI2.
https://bugs.freedesktop.org/show_bug.cgi?id=26581
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 8736d112af changed the priority
ordering of the InputClass option merging to be "last match wins". This
fixes the handling of Option "Ignore" to follow that logic.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
These drivers have been deactivated for over a year now, let's not refer
potential users to them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since the server searches in a vendor specific path now, we can install
the evdev catchall there without disturbing local administration files.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In addition to the conf files found in /etc/X11 or $sysconfdir/X11 used
for local administration, we also reserve a system directory for vendor
and package usage. The simple search path is:
/usr/share/X11/xorg.conf.d
$datadir/X11/xorg.conf.d
Files from these directories will have the lowest config priority. The
directory $datadir/X11/xorg.conf.d is exported from xorg-server.pc in
the variable "sysconfigdir". Packages should install their .conf files
to the directory specified by:
`pkg-config --variable=sysconfigdir xorg-server`
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no reason to carry all the oddities from xorg.conf like appended
hostname to the search path for xorg.conf.d. This changes it to something
very simple:
/etc/X11/<cmdline>
$sysconfdir/X11/<cmdline>
/etc/X11/xorg.conf.d
$sysconfdir/X11/xorg.conf.d
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Explain the "safe" path dance for -configdir, too.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We could just use $projectroot/etc and $projectroot/share, but the user
might have other plans for them.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Having a generic catchall also adds devices like accelerometers. These
devices make X unusable, hence restrict matching to "known sane" devices
like pointers, touchpads, keyboards, tablets and touchscreens.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: James Cloos <cloos@jhcloos.com>
Fixes x86emu builds when using non-gnu compilers now that u64 is required
Before this fix, the u64 type would not be defined, causing
x86emu/sys.c to fail to build:
"sys.c", line 102: syntax error before or at: ldq_u
"sys.c", line 102: syntax error before or at: *
Since Keith requested using <stdint.h>, converted all the x86emu
typedefs to use the stdint types.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we run out of opcodes, nothing is print on the log, making the
problem hard to debug. In the current Xserver, if you enable some
extensions like multibuffer (+2 events) and use nvidia binary driver (+5
events) you can run out of opcode numbers.
Signed-off-by: Paulo Ricardo Zanoni <pzanoni@mandriva.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Older versions generate filenames that are different from
the ones listed in the Makefile.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
WindowsWM support is still experimental, and uses the Rootless extension
which currently breaks the simultaneous build of the other DDXs (see
commit b3415187e9). So we disable it by
default for now; once the latter issue is fixed we can make this 'auto'.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This possibly brings back whatever the bug is in
http://bugs.freedesktop.org/show_bug.cgi?id=1168 for
-rootless mode, but since we don't have reproduction
steps for that, I can't test that...
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Several extensions are not supported by XWin, some of which are enabled
by default in configure. We forcefully disable these early on so that
configure will succeed without arguments and without the corresponding
proto installed.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Only Xorg is installed setuid, so there is no need to run this configure
test on Cygwin.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
vga arbiter will be locked in one device while AbortDDX will call LeaveVT
routines from the other device. Fail!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Due to the checks in configure, this means it gets priority over HAL if
libudev is found.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
udev needs some xorg.conf file to tell it to load a suitable input
driver, 10-evdev.conf is as simple as they come, mapping all evdev
devices to the evdev driver.
Signed-off-by: Keith Packard <keithp@keithp.com>
When doing driver autoconfiguration with some parts of the config file
present but no driver set (e.g. only input configuration) fix the case
that we may have multiple drivers to try.
Create a screen section for each driver and let them be tried in a row.
Signed-off-by: Ruediger Oertel <ro@suse.de>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Timo Aaltonen <timo.aaltonen@aalto.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Export DDX swap control status from the DRI2 module and check for it in
GLX when initializing extensions.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
If a few swaps were queued leading to a throttle related block on the
client, and then the client submitted an MSC wait, one of the previous
swap wakeups could have caused the MSC wait to complete early. Add a
flag for this to prevent a swap wake from prematurely waking an MSC
waiter.
Reported-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Avoid a potential swapsPending underflow by incrementing it before
ScheduleSwap, which may complete it immediately. And be sure to
decrement it again in case the schedule failed.
Reported-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We need to throttle swaps here in addition to when the context is made
current to avoid causing problems with clients that just swap.
Throttling here also ensures our swaps get ordered as long as we block
the client occasionally.
Reported-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Update our supported DRI2 protocol version as each driver does
DRI2ScreenInit, since depending on available kernel features, each DDX
may support different callbacks and therefore protocol.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
A 0 swap interval means that swaps shouldn't be sync'd to vblank, so
just complete the swap immediately in that case.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Handle drawable destruction and lifetime correctly.
Check whether the drawable priv is valid in DRI2SwapInterval(),
DRI2WaitSBC() and DRI2WaitMSC(); it may have gone away, so be sure to
check it before using it.
If more than 1 outstanding swap is queued, we may complete several after
an app has exited. If we free it after the first one completes and the
refcount reaches 0, we'll crash the server on subsequent completions.
So delay freeing until all swaps complete and remove the error message
as this is a normal occurence. To do this properly, we must also avoid
destroying drawables in DRI2DestroyDrawable() if a swap or wait event is
pending.
And finally, make sure we free drawables in DRI2WaitMSCComplete() if
necessary (i.e. if the refcount has reached 0 and this MSC was the last
pending event on the object).
Reported-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Returns expected SBC after completion of swap to caller, as required by
OML_sync_control spec, instead of the last_swap_target value.
Passes target_msc, divisor, remainder, correctly for
glXSwapBuffersMscOML() call, while retaining old behaviour for simple
glXSwapBuffers() call.
An OML swap can have a 0 target_msc, which just means it needs to
satisfy the divisor/remainder equation. Pass this down to the driver as
needed so we can support it.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
