These events aren't reachable after xwl_present_cleanup, so they're
leaked if we don't free them first.
This requires storing the pixmap pointer in struct xwl_present_window.
Luckily, the buffer pointer isn't used for anything, so just replace
that.
v2:
* Bump pixmap reference count in xwl_present_flip and drop it in
xwl_present_free_event, fixes use-after-free in the latter due to the
pixmap already being destroyed.
Reviewed-by: Dave Airlie <airlied@redhat.com>
When the linux-dmabuf protocol is available, prefer it over the old
wl_drm protocol. Previously wl_drm was used when modifiers aren't
supported, however linux-dmabuf supports formats without modifiers too.
In this case, linux-dmabuf will send a DRM_FORMAT_MOD_INVALID modifier
for each supported format [1].
This allows compositors to better handle these buffers, getting a
DMA-BUF and implementing features like direct scan-out.
A similar logic has been implemented for EGL [2].
DRM_FORMAT_MOD_INVALID is now stored in the xwl_screen->formats list.
glamor_get_modifiers still returns FALSE with zero modifiers if the
only advertised modifier is DRM_FORMAT_MOD_INVALID.
[1]: fb9b2a8731
[2]: c376865f5e
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Previously, linux-dmabuf was used unconditionally if the buffer had a
modifier. However creating a linux-dmabuf buffer with a format/modifier
which hasn't been advertised will fail.
Change xwl_glamor_gbm_get_wl_buffer_for_pixmap to use linux-dmabuf when
the format/modifier has been advertised only.
Signed-off-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1035
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This flag should only be used when the caller intends to display the
buffer on a hardware plane. Xwayland isn't a DRM client, so it doesn't
make sense to use this flag.
This change will allow the driver to potentially use buffer parameters
that are more optimized.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Without this the client library will flail around looking for a default
provider, probably one named "indirect", and that defeats the point of
having the EGL provider for direct context support in the first place.
This assumes that "mesa" will work, of course, and in general it should.
Mesa drivers will DTRT through the DRI3 setup path, and if our glamor is
atop something non-Mesa then you should fall back to llvmpipe like 1.20.
In the future it might be useful to differentiate the vendor here based
on whether glamor is using gbm or streams.
Fixes: xorg/xserver#1032
Xwayland uses the device private to point to the `xwl_seat`.
Device may be removed at any time, including on suspend.
On resume, if the DIX code ends up calling a function that requires the
`xwl_seat` such as `xwl_set_cursor()` we may end up pointing at random
data.
Make sure the clear the device private data on removal so that we don't
try to use it and crash later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
https://gitlab.freedesktop.org/xorg/xserver/issues/709
Drop GBM_BO_USE_SCANOUT from the GBM_BO_IMPORT_FD import, add
GBM_BO_USE_RENDERING to the GBM_BO_IMPORT_FD_MODIFIER import.
If the DMA-BUF cannot be scanned out, gbm_bo_import with
GBM_BO_USE_SCANOUT will fail. However Xwayland doesn't need to scan-out
the buffer and can work fine without scanout. Glamor only needs
GBM_BO_USE_RENDERING.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
In this pretty Wine/Proton specific kludge, we try to handle confining grabs
on InputOnly windows by trying to find the InputOutput window that the pointer
would get visually confined to.
The grabbing window and the visible window come from different clients, so
we used to simply resort to the pointer focus. This is troublesome though, as
the call may happen very soon at a time that the toplevel wasn't yet mapped by
the Wayland compositor, so the pointer focus may well be out of date soon.
In these situations, it does seem that even though the confining grab happens
too early to have the wayland surface mapped, the xserver view of the WindowPtr
does already reflect the size. Use this to find out the better window to
assign the confining grab to, one whose geometry fully contains the InputOnly
window's.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_seat_maybe_lock_on_hidden_cursor() checks that the value of
cursor_confinement_window is not NULL, yet there is no code path
that could lead to this.
Remove the test for cursor_confinement_window being set, it's useless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client issues a ConfinePointer wit ha hidden cursor,
Xwayland may translate that as a pointer lock.
However, if the pointer is located on another window at the time,
the request may be ignored, even if the pointer later enters the window.
To avoid that issue, check again if locking the pointer with a hidden
cursor is needed when pointer enters a surface.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client has an active grab on the pointer, all events are
reported relative to the window with the grab.
For Xwayland, if an X11 client has a grab with a pointer confinement
active, while pointer focus is on another window, motion events should
not be reported to the client with the grab, because that sets the X11
client appart, the events would be reported when the pointer is on any
X11 window but not on Wayland native surfaces.
Therefore, if the pointer is confined on a window and that window
differs from the actual pointer focus window, just pretend we lost
pointer focus to another window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If a client issues a grab on the pointer while the cursor is on another
X11 window, and then hides the cursor, we may end up locking the pointer
onto that other window.
Then a button click might end up moving the focus away from the window
which issued the grab, leaving the whole setup in a mixed up state.
Typically, if the pointer is on another X11 window, we should not try to
lock the pointer, so that it can be moved back to the window which
actually issues the grab (and hence the pointer confinement). Typically,
this is the same as an X11 client issuing a pointer grab while the
cursor is on another Wayland native window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Mutter recently added headless tests, and when running those tests the
Wayland compositor runs for a very short time.
Xwayland is spawned by the Wayland compositor and upon startup will
query the various Wayland protocol supported by the compositor.
To do so, it will do a roundtrip to the Wayland server waiting for
events it expects.
If the Wayland compositor terminates before Xwayland has got the replies
it expects, it will loop indefinitely calling `wl_display_roundtrip()`
continuously.
To avoid that issue, add a new `xwl_screen_roundtrip()` that checks for
the returned value from `wl_display_roundtrip()` and fails if it is
negative.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We were only calling xwl_present_unrealize_window for the toplevel
window, but the list can contain entries from child windows as well,
in which case we were leaving dangling pointers to freed memory.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/1000
Fixes: c5067feaee "xwayland: Use single frame callback for Present
flips and normal updates"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Recently, rooted Xwayland crashes on wlroots-based compositors, because
wlroots removed the deprecated wl_shell protocol.
This MR fixes this by changing the code in question to the xdg-shell
protocol. My motivation do this: on etnaviv-based embedded platforms,
rooted Xwayland is much faster and doesn't cause UI rendering bugs
compared to rootless Xwayland.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Since the recent fix to call xwl_output_set_window_randr_emu_props() from
ensure_surface_for_window(), it is now only called on a toplevel window,
so the is-toplevel check is not necessary for the
xwl_output_set_window_randr_emu_props() case.
This commit moves the check to xwl_output_set_randr_emu_prop_callback()
so that we only do it when we are walking over all Windows of a client
to update the property on a change of the emulated resolution.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For window-manager managed windows, xwl_realize_window is only called for
the window-manager's decoration window and not for the actual client window
on which we should set the _XWAYLAND_RANDR_EMU_MONITOR_RECTS prop.
Usualy this is not a problem since we walk all client windows to update
the property when the resolution is changed through a randr call.
But for apps which first do the randr change and only then create their
window this does not work, and our xwl_output_set_window_randr_emu_props
call in xwl_realize_window is a no-op as that is only called for the wm
decoration window and not for the actual client's window.
This commit fixes this by making ensure_surface_for_window() call
xwl_output_set_window_randr_emu_props on the first and only child of
window-manager managed windows.
Note this also removes the non-functional xwl_output_set_window_randr_emu_props
call from xwl_realize_window, which was intended to do this, but does not
work.
This fixes apps using the ogre3d library always running at the
monitors native resolution.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some clients, which use vidmode to change the resolution when going fullscreen,
create an override-redirect window and never trigger the screen->ResizeWindow
callback we rely on to do the xwl_window_check_resolution_change_emulation().
This causes us to not apply a viewport to them, causing the fullscreen window
to not fill the entire monitor.
This commit adds a call to xwl_window_check_resolution_change_emulation()
at the end of ensure_surface_for_window() to fix this. Note that
ensure_surface_for_window() exits early without creating an xwl_window
for new windows which will not be backed by a wayland surface and which
thus will not have an xwl_window.
This fixes ClanLib-0.6.x and alleggl-4.4.x using apps not properly
fullscreening.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The code building the mode-list does the following to deal with screen
rotation:
if (need_rotate || xwl_output->rotation & (RR_Rotate_0 | RR_Rotate_180)) {
mode_width = xwl_output->width;
mode_height = xwl_output->height;
} else {
mode_width = xwl_output->height;
mode_height = xwl_output->width;
}
This means we need to do something similar in xwl_output_set_emulated_mode()
to determine if the mode being set is the actual (not-emulated) output mode
and we this should remove any emulated modes set by the client.
All callers of xwl_output_set_emulated_mode always pass a mode pointer
to a member of xwl_output->randr_output->modes, so we do not need to
duplicate this code, instead we can simply check that the passed in mode
is modes[0] which always is the actual output mode.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Not only hook the ResizeWindow method of the screen (which really is
MoveAndResize) but also hook the MoveWindow method for checking if we
need to setup a viewport for resolution change emulation.
Our resolution change emulation check if the windows origin matches
the monitors origin and the windows origin can also be changed by just
a move without being resized.
Also checking on a move becomes esp. important when we move to checking
on changes to the top-level non-window-manager client (X11)Window instead
of on changes to the xwl_window later on in this patch series.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The recent change to use the top-level non-window-manager Window drawable
coordinates from xwl_window_check_resolution_change_emulation() in
combination with only calling it on a resize when the top-level window
is moved breaks things with mutter/gnome-shell.
When fullscreening a X11 window, mutter moves its window-decoration Window
wrapping the top-level Window to the monitor's origin coordinates (e.g. 0x0)
last. This updates the top-level's drawable coordinates, but as the
actual MoveWindow is called on the wrapper Window and not on the toplevel
we do not call xwl_window_check_resolution_change_emulation() and we never
enable the viewport.
This commit fixes this by also calling
xwl_window_check_resolution_change_emulation() if the Window being moved
is an xwl_window itself.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a reparented window is resized directly check the emulation instead of
doing this only when the window manager parent window is resized, what might
never happen.
For that to work we need to make sure that we compare the current size of the
client toplevel when looking for an emulated mode.
Changes by Hans de Goede:
- Remove xwl_window x, y, width and height members as those are no longer used.
- Add check for xwl_window_from_window() returning NULL.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make window_get_none_wm_owner return the first non-wm-window instead of the
owner (client) of the first non-wm-window and rename it to
window_get_client_toplevel to match its new behavior.
This is a preparation patch for switching to using the drawable coordinates
in xwl_window_should_enable_viewport()
Changes by Hans de Goede:
- Split this change out into a separate patch for easier reviewing
- Rename window_get_none_wm_owner to window_get_client_toplevel to match
its new behavior
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An X11 window manager might add a chain of parent windows when reparenting to a
decoration window.
That is for example the case for KWin, which reparents client windows to one
decoration and another wrapper parent window.
Account for that by a recursion into the tree. For now assume as before that
all X11 window managers reparent with one child only for these parent windows.
Changes by Hans de Goede:
- Move the xwl_window_is_toplevel() from a later patch in this series here
as it really belongs together with these changes
- Drop no longer necessary xwl_window argument from window_get_none_wm_owner
parameters
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a viewport is already created we can reuse this object instead of
destroying it and getting a new one for updating the source rectangle and
destination size.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of iterating over all clients which are listening for events on the
root window and checking if the client we are dealing with is the one
listening for SubstructureRedirectMask | ResizeRedirectMask events and thus
is the window-manager, cache the client-id of the window-manager in
xwl_screen and use that when checking if a client is the window-manager.
Note that we cache and compare the client-id rather then the ClienPtr,
this saves reading the ClientPtr from the global clients array when doing
the comparison.
Suggested-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Xorg supports the '-version' command line option, add something similar
to Xwayland.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/976
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
In between the two phases introduced by the previous change. This makes
sure all pending drawing to the new buffers is flushed before they're
committed to the Wayland server.
The first phase sets the new surface properties for all damaged
windows, then the second phase commits all surface updates.
This is preparatory for the next change, there should be no observable
change in behaviour (other than the order of Wayland protocol
requests).
Reviewed-by: Adam Jackson <ajax@redhat.com>
It flushes any pending drawing to the kernel, to make sure it'll be
visible to the Wayland server.
Without this, it was possible for the Wayland server to process surface
commits before Xwayland got around to flushing the corresponding
drawing, which could result in stale or even completely random window
contents being visible.
v2:
* Make EGL backend post_damage hook mandatory, don't check for NULL in
xwl_glamor_post_damage. (Olivier Fourdan)
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes build failure.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/954
Fixes: 89e32d00f6 "xwayland: Move Xwayland windows to its own sources"
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Now that each source and header should be in order, we can safely cleaup
the last remaining bits from the main `xwayland.h` which is not needed
anymore and can be removed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland GLX declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland vidmode declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland CVT declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland screen related code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland cursor declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland output declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland input declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland Present declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland generic pixmap code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Over time, Xwayland main source file `xwayland.c` has grown in size
which makes it look cluttered and harder to read.
Move the code dealing with Xwayland window to its own source and header
files.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, `xwayland.h` contains all the declarations, which is a bit
awkward and hard to follow.
Move the GLAMOR relevant declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, `xwayland.h` contains all the declarations, which is a bit
awkward and hard to follow.
Move the SHM relevant declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, `xwayland.h` contains all the declarations, which is a bit
awkward and hard to follow.
Move the Xwayland structures declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Similar to what is done in Xorg. Not doing this prevented apps from
using GLX with a Composite visual, e.g. Firefox WebRender or Chromium.
v2:
* Fix inverted direct_color test, fixes Chromium as well.
* Drop Composite extension guards, since other Xwayland code calls
compRedirectWindow/compUnredirectWindow unconditionally anyway.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/921
Fixes: 8469241592 "xwayland: Add EGL-backed GLX provider"
Reviewed-by: Adam Jackson <ajax@redhat.com> # v1
Instead of only the fallback timer.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/854
v2:
* Drop unused frame_callback member of struct xwl_present_window
(Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Using a list of Present windows that need to be called back.
This prepares for the following change, there should be no change in
observed behaviour.
v2:
* Use xwl_window_create_frame_callback instead of making the
frame_listener struct non-static (Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Damage coordinates are relative to the drawable, (0,0) being the top
left corner inside the border.
Therefore, when applying damages or accumulating damages between window
buffers, we need to take the window border width into account as well,
otherwise the updates might be only partial or misplaced.
Related: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Right now, we would recycle the window buffers whenever the window the
window is resized.
This, however, is not sufficient to guarantee that the buffers are up
to date, since changing the window border width for example would not
trigger a `WindowResize` (the border being outside the window).
Make sure we recycle the buffers on `SetWindowPixmap` to ensure that
the buffers will be recycled whenever the pixmap size is changed.
Related: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The Present code sends the idle notification event to the client after
xwl_present_flush returns. If we don't flush our GPU work here, the
client may race to draw another frame to the same buffer, so we may end
up copying (parts of) that new frame instead of the one we meant to.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/835
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Xwayland takes care of not attaching a new buffer if a frame callback is
pending.
Yet, the existing buffer (which was previously attached) may still be
updated from the X11 side, causing unexpected visual glitches to the
buffer.
Add multiple buffering to the xwl_window and alternate between buffers,
to leave the Wayland buffer untouched between frame callbacks and avoid
stuttering or tearing issues.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/835
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Add a mechanism to create, recycle and destroy window buffers when
needed.
Typically, this adds a new `xwl_window_buffer` structure which
represents a buffer for a given Xwayland window.
Each Xwayland window has two different pools of buffers:
- The available buffers pool:
Those are buffers which where created previously and that have either
not been submitted to the compositor or submitted and released.
- The unavailable buffers pool:
Those are typically the buffers which are being used by the
compositor, awaiting a release.
Initially, an Xwayland window starts with both pools empty. As soon as a
new buffer is needed, it's either created (if there is none available)
or picked from the pool of available buffers.
Once submitted to the compositor, the buffer is moved to the pool of
unavailable buffers. When the corresponding `wl_buffer` is released by
the compositor, it is moved back to pool of available buffers again to
be reused when needed.
To avoid keeping too many buffers around doing nothing, a garbage
collection of older, unused buffers also takes care of disposing the
buffers being unused for some time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The API `wl_buffer_add_listener` is misleading in the sense that there
can be only one `wl_buffer` release callback, and trying to add a new
listener when once is already in place will lead to a protocol error.
The Xwayland EGL backends may need to set up their own `wl_buffer`
release listener, meaning that there is no way to our own `wl_buffer`
release callback.
To avoid the problem, add our own callback API to be notified when the
`wl_buffer` associated with an `xwl_pixmap` is released, triggered from
the different `xwl_pixmap` implementations.
Also update the Present code to use the new buffer release callback API.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, when a X11 client (usually the X11 window manager from a
Wayland compositor) changes the value of the X11 property
`_XWAYLAND_ALLOW_COMMITS` from `false` to `true`, all pending frame
callbacks on the window are discarded so that the commit occurs
immediately.
Weston uses that mechanism to prevent the content of the window from
showing before it's ready when mapping the window initially, but
discarding the pending frame callbacks has no effect on the initial
mapping of the X11 window since at that point there cannot be any frame
callback on a surface which hasn't been committed yet anyway.
However, discarding pending frame callbacks can be problematic if we
were to use the same `_XWAYLAND_ALLOW_COMMITS` mechanism to prevent
damages to be posted before the X11 toplevel is updated completely
(including the window decorations from the X11 window manager).
Remove the portion of code discarding the pending frame callback,
Xwayland should always wait for a pending frame callback if there's one
before posting new damages.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/333
For some reason, indentation for EGL backend hooks was broken.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, Xwayland pixmap SHM code uses `malloc()` to allocate the
xwl_pixmap.
Use `calloc()` instead, as the EGLstream backend does, as it is safer
(initializing the allocated data to 0).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, glamor GBM backend uses `malloc()` to allocate the
xwl_pixmap.
Use `calloc()` instead, as the EGLstream backend does, as it is safer
(initializing the allocated data to 0).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The definition by the manual is `calloc(size_t nmemb, size_t size)`.
Swap the arguments of calloc() calls to match the definition.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When a pixmap is created with a backing FBO, the FBO should be cleared
to avoid rendering uninitialized memory. This could happen when the
pixmap is rendered without being filled in its entirety.
One example is when a top-level window without a background is
resized. The pixmap would be reallocated to prepare for more pixels,
but uninitialized memory would be rendered in the resize offset until
the client sends a frame that fills these additional pixels.
Another example is when a new top-level window is created without a
background. Uninitialized memory would be rendered after the pixmap is
allocated and before the client sends its first frame.
This issue is only apparent in OpenGL implementations that don't zero
the VRAM of allocated buffers by default, such as RadeonSI.
Signed-off-by: Dor Askayo <dor.askayo@gmail.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/636
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
`glGetString(GL_VERSION)` will return NULL without a current context.
Commit dabc7d8b (“xwayland: Fall back to GLES2 if we don't get at least
GL 2.1 in glamor”) would check the context is created, but it is made
current just after, so the call to `epoxy_gl_version()` would return 0,
hence defeating the version check.
Make the context current prior to call `epoxy_gl_version()`.
Fixes: dabc7d8b - xwayland: Fall back to GLES2 if we don't get at least
GL 2.1 in glamor
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/932https://gitlab.freedesktop.org/xorg/xserver/merge_requests/324
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Some particularly unfortunate hardware (Intel gen3, mostly) will give
you GLES2 but not GL 2.1. Fall back to GLES2 for such cases so you still
get accelerated GLX.
Define EGL_NO_X11 everywhere were we also define MESA_EGL_NO_X11_HEADERS,
EGL_NO_X11 is the MESA_EGL_NO_X11_HEADERS equivalent for the egl headers
shipped with libglvnd.
This fixes the xserver not building with the libglvnd-1.2.0 headers:
In file included from /usr/include/EGL/eglplatform.h:128,
from /usr/include/epoxy/egl_generated.h:11,
from /usr/include/epoxy/egl.h:46,
from glamor_priv.h:43,
from glamor_composite_glyphs.c:25:
/usr/include/X11/Xlib.h:222:2: error: conflicting types for 'GC'
222 | *GC;
| ^~
In file included from glamor.h:34,
from glamor_priv.h:32,
from glamor_composite_glyphs.c:25:
../include/gcstruct.h:282:3: note: previous declaration of 'GC' was here
282 | } GC;
| ^~
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Apps using randr to change the resolution when going fullscreen, in
combination with _NET_WM_STATE_FULLSCREEN to tell the window-manager (WM)
to make their window fullscreen, expect the WM to give the fullscreen window
the size of the emulated resolution as would happen when run under Xorg (*).
We need the WM to emulate this behavior for these apps to work correctly,
with Xwaylands resolution change emulation. For the WM to emulate this,
it needs to know about the emulated resolution for the Windows owning
client for each monitor.
This commit adds a _XWAYLAND_RANDR_EMU_MONITOR_RECTS property, which
contains 4 Cardinals (32 bit integers) per monitor with resolution
emulation info. Window-managers can use this to get the emulated
resolution for the client and size the window correctly.
*) Since under Xorg the resolution will actually be changed and after that
going fullscreen through NET_WM_STATE_FULLSCREEN will size the window to
be equal to the new resolution.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Games based on the allegro gaming library or on ClanLib-1.0 do not size
their window to match the fullscreen resolution, instead they use a
window covering the entire screen, drawing only the fullscreen resolution
part of it.
This commit adds a check for these games, so that we correctly apply a
viewport to them making fullscreen work properly for these games under
Xwayland.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for fake mode changes using viewport, for apps which want to
change the resolution when going fullscreen.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
crtc->mode reflects the mode set through the xrandr extension, once we
add support for also changing the mode through the vidmode extension this
will no longer correctly reflect the emulated resolution.
Add a new xwlVidModeGetCurrentRRMode helper which determines the mode by
looking at the emulated_mode instead.
Likewise add a xwlVidModeGetRRMode helper and use that in
xwlVidModeCheckModeForMonitor/xwlVidModeCheckModeForDriver to allow any
mode listed in the randr_output's mode list.
This is a preparation patch for adding emulated mode/resolution change
support to Xwayland's XF86 vidmode extension emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for adding emulated mode/resolution change
support to Xwayland's XF86 vidmode extension emulation, using the
Wayland viewport extension.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for per client randr-resolution change emulation using viewport,
for apps which want to change the resolution when going fullscreen.
Partly based on earlier work on this by Robert Mader <robert.mader@posteo.de>
Note SDL2 and SFML do not restore randr resolution when going from
fullscreen -> windowed, I believe this is caused by us still reporting the
desktop resolution when they query the resolution. This is not a problem
because when windowed the toplevel window size includes the window-decorations
so it never matches the emulated resolution.
One exception would be the window being resizable in Windowed mode and the
user resizing the window so that including decorations it matches the
emulated resolution *and* the window being at pos 0x0. But this is an
extreme corner case. Still I will submit patches upstream to SDL2
and SFML to always restore the desktop resolution under Xwayland,
disabling resolution emulation all together when going windowed.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for storing per output randr/vidmode emulated resolution
into the per client data.
Since we do not have a free/delete callback for the client this uses
a simple static array. The entries are tied to a specific output by the
server_output_id, with a server_output_id of 0 indicating a free slot
(0 is the "None" Wayland object id).
Note that even if we were to store this in a linked list, we would still
need the server_output_id as this is *per client* *per output*.
This is a preparation patch for adding randr/vidmode resolution
change emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add per client private data, which for now is empty.
This is a preparation patch for adding randr/vidmode resolution
change emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds the RandR 1.2 interface to xwayland and allows modes
advertised by the compositor to be set in an undistructive manner.
With this patch, applications that try to set the resolution will usually
succeed and work while other apps using the same xwayland
instance are not affected at all.
The RandR 1.2 interface will be needed to implement fake-mode-setting and
already makes applications work much cleaner and predictive when a mode
was set.
[hdegoede@redhat.com: Make crtc_set only succeed if the mode matches
the desktop resolution]
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for adding support for apps which want to
change the resolution when they go fullscreen because they are hardcoded
to render at a specific resolution, e.g. 640x480.
Follow up patches will fake the mode-switch these apps want by using
WPviewport to scale there pixmap to cover the entire output.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a viewport is set, damage will only work properly when using
wl_surface_damage_buffer instead of wl_surface_damage.
When no viewport is set, there should be no difference between
surface and buffer damage.
This is a preparation patch for using viewport to add support for fake
mode-changes through xrandr for apps which want to change the resolution
when going fullscreen.
Changes by Hans de Goede <hdegoede@redhat.com>:
-Split the damage changes out into their own patch
-Add xwl_surface_damage helper
-Also use buffer_damage / the new helper for the present and cursor code
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit adds support for the wayland wp_viewport extension, note
nothing uses this yet.
This is a preparation patch for adding support for fake mode-changes through
xrandr for apps which want to change the resolution when going fullscreen.
[hdegoede@redhat.com: Split the code for the extension out into its own patch]
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In non-rootless mode, not all pixmaps need a wl_buffer backing.
Suggested-by: Twaik Yont (@twaik) in #834
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The compositor may send DRM_FORMAT_MOD_INVALID instead of a list of
modifiers for various reasons. Handle this gracefully by ignoring it.
Without this, if a compositor would send DRM_FORMAT_MOD_INVALID, it'd
result in empty windows provided by Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This FD also triggers the "wait for WM_S0" paths, so that the
compositor may set up a "maintenance line" for Xwayland, for
services that are essential to run before any client (eg. xrdb).
Those services would use this FD, disguised as an extra display
connection.
This -initfd can be seen as a generalization of -wm, a Wayland
compositor may use -initfd to launch its WM and any other clients
that should start up, or it may use -wm as a dedicated connection for
the WM and optionally use -initfd for the misc. startup clients.
If either of -wm or -initfd is passed, Xwayland will expect a selection
notification on WM_S0 before incorporating the FDs in -listen to the
poll list.
Also, correct a minor typo in the listenfd argument output,
give → given.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
If Xwayland gets to realize a window meant for composition before the
compositor redirected windows (i.e. redirect mode is not RedirectDrawManual
yet), the window would stay "invisible" as we wouldn't create a
wl_surface/wl_shell_surface for it at any later point.
This scenario may happen if the wayland compositor sets up a X11 socket
upfront, but waits to raise Xwayland until there are X11 clients. In this
case the first data on the socket is the client's, the compositor can hardly
beat that in order to redirect subwindows before the client realizes a
Window.
In order to jump across this hurdle, allow the late creation of a matching
(shell) surface for the WindowPtr on SetWindowPixmapProc, so it is ensured
to be created after the compositor set up redirection.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This will be dissociated in future commits to handle the cases
where windows are being realized before there is a compositor
handling redirection.
In that case, we still want the DamagePtr to be registered upfront
on RealizeWindowProc before a corresponding xwl_window might be
created. Most notably, it cannot be lazily created on
SetWindowPixmapProc as damage accounting gets broken.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
This adds support for xdg-output-unstable-v1 version 3, added in [1].
This new version deprecates zxdg_output_v1.done and replaces it with
wl_output.done. If the version is high enough, there's no need to wait for both
an xdg_output.done event and a wl_output.done event -- we only care about
wl_output.done.
[1]: 962dd53537
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Some modules are required in multiple places in the meson file.
Move the actual requirements to the top of the file as a variable so
that updating a version does not require changing the actual value in
multiple places.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Building Xwayland without glamor support would raise a warning at build
time:
xwayland.c: In function ‘xwl_screen_init’:
xwayland.c:980:10: warning: unused variable ‘use_eglstreams’
980 | Bool use_eglstreams = FALSE;
| ^~~~~~~~~~~~~~
When building without glamor support, we cannot have EGL Streams support
either, the two being related. So we do not need to declare the variable
`use_eglstreams` if glamor is not enabled.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When building Xwayland without glamor support enabled using automake,
the build would fail at link time trying to find `glamor_block_handler`:
/usr/bin/ld: xwayland-glx.o: in function `egl_drawable_wait_x':
hw/xwayland/xwayland-glx.c:102: undefined reference to
`glamor_block_handler'
Make sure we don't try to build `xwayland-glx.c` without glamor in the
Xwayland Makefile.
Note: Meson build is fine because it's already build only with glamor
enabled.
Fixes: commit 8469241 - "xwayland: Add EGL-backed GLX provider"
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Both `gbm_bo_create()` and `gbm_bo_create_with_modifiers()` can fail and
return `NULL`.
If that occurs, `xwl_glamor_gbm_create_pixmap()` will not create a
pixmap for the (NULL) GBM bo, but would still try to free the bo which
leads to a crash in mesa:
[...]
#7 <signal handler called>
#8 in gbm_bo_destroy (bo=0x0) at ../src/gbm/main/gbm.c:439
#9 in xwl_glamor_gbm_create_pixmap () at xwayland-glamor-gbm.c:245
#10 in ProcCreatePixmap () at dispatch.c:1440
#11 in Dispatch () at dispatch.c:478
#12 in dix_main () at main.c:276
To avoid the crash, only free the GBM bo if not `NULL`.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1729925
There's not really a good way to query this from the wayland server, so
just set the maximum to the X11 protocol limits. While we're at it,
lower the minimum screen size to something implausibly small too, just
in case.
Fixes: xorg/xserver#850
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Running Xwayland non-rootless and resizing the output would lead to a
crash while trying to update the larger areas of the root window.
Make sure we resize the backing pixmap according to the new output size
to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/834
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Using the existing command line option "-listen" for passing file
descriptors between the Wayland compositor and Xwayland is misleading,
Xwayland should add is own command line option for that specific use.
As XWayland is spawned by the Wayland compositor, we cannot just change
the option, as that would break all existing Wayland compositors using
Xwayland, so we add a new options "-listenfd" and mark the previous one
as deprecated and log a warning, but it still works for backward
compatibility.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/214
Xwayland uses the command line option “-listen” to pass file descriptors
from the Wayland compositor.
That breaks the traditional, documented behavior of the “-listen”
command line option which is to enable a transport type.
Checks if the given option starts with a digit, otherwise treat it as a
regular transport type.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/817
Suggested-by: Rodrigo Exterckötter Tjäder
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
a2rgb10 configs would end up with channel masks corresponding to
argb8888. This would confuse the GLX core code into matching an a2rgb10
config to the root window visual, and that would make things look wrong
and bad.
Fix this by handling more cases. We're still not fully general here, and
this could still be wrong on big-endian. The XXX comment about doing
something less ugly still applies, ideally we would get this information
out of EGL instead of making lucky guesses. Still, better than it was.
Fixes: xorg/xserver#824
Hiding the tablet tool cursor results in it being hidden forever after.
This is due to the stale frame callback that will neither be disposed
or replaced. This can be reproduced in krita (X11) as the pointer
cursor is hidden while over the canvas.
Clearing the frame callback ensures the correct behavior in future
xwl_tablet_tool_set_cursor() calls (i.e. a new cursor surface being
displayed, and a new frame callback created), and is 1:1
with xwl_seat_set_cursor() for pointers.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
