In the new KMS APIs, the legacy drmModeSetCursor ioctl actually waits
for a vblank after changing the cursor image before returning, meaning
that the X server, in attempting to hide the cursor before updating
its image, actually makes that hide *visible* for a full vblank.
It's unknown why the X server does this by default, but turn it off.
If we're with a legacy driver that doesn't support the modern
drmModeSetCursor by waiting for a vblank before returning, we're going
to get a tiny bit of tearing on the cursor plane. But between tearing
with a new cursor image and tearing with a blank cursor image, I'd
rather the former.
The only proper solution to this is an atomic ioctl that page flips
all planes, including the cursor plane, at vblank time and at the same
time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In Xnest or Xephyr, pressing CapsLock when focus is on another
window does not update the state in the nested X server.
This is because when synchronizing the lock modifier, sending a
keypress or a key release only is not sufficient to toggle the state,
unlike regular modifiers, one has to emulate a full press/release
to lock or unlock the modifier.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland Makefile explicitely set its dependencies on
WAYLAND_LIBS. If the ibrairies are installed in a non-standard
path, WAYLAND_LIBS contains '-L/path/to/the/lib' which will fail
at build time with:
"No rule to make target '-L/path/to/the/lib', needed by 'Xwayland'.
Stop"
Remove that explicit dependency to avoid the problem (LDADD ought
to be enough to get the right libraries linked).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the suid wrapper is enabled, /usr/bin/Xorg is just a shell script that
execs either /usr/libexec/Xorg.bin directly or the Xorg.wrap binary which then
execve's /usr/libexec/Xorg.bin.
Either way, we end up with Xorg.bin, which is problematic for two reasons:
* ps shows the command as Xorg.bin
* _COMM and _EXE in systemd's journal will both show Xorg.bin as well
There's not much we can do about the path, but having the actual command stay
as Xorg means better compatibility to existing scripts. And, the reason for
this path: the command
journalctl _COMM=Xorg
works universally, regardless of whether the wrapper is used or not.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Xephyr's pseudocolor emulation added in:
commit 81a3b6fe27
Author: Matthew Allum <breakfast@10.am>
Date: Mon Nov 8 22:39:47 2004 +0000
Add support to Xephyr for lower depths than hosts
only tracks one global colormap for the whole (Xephyr) display. Move
this to per-screen state so each screen's colormap can be correct.
[ajax: rebased to 1.17, cleaned up commit message]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michele Baldessari <michele@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
present.c: In function 'ms_present_flush':
present.c:204:9: error: implicit declaration of function
'glamor_block_handler'
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87858
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
modesetting hooked up vblank support for DRI2, but was missing support
for vblanks in Present.
This is mostly copy and pasted from Keith's code in the intel driver.
v2: Use ms_crtc_msc_to_kernel_msc in ms_present_queue_vblank to hook
up the vblank_offset workaround for bogus MSC values (which the
DRI2 code already did).
Also simplify the ms_present_get_crtc function. vblank.c already
implements the functionality; we just need to convert types.
v3: Fix ms_flush_drm_events return code. I'd copied code where 0 meant
success into a function that returned a boolean, so the return code
was always backwards.
Also add DebugPresent calls in ms_present_vblank_{handler,abort}.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We basically want it throughout the driver.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
crtc->enabled is insufficient; we should also make sure DPMS is on.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't want to try to vblank synchronize to monitors which are off.
In order to handle that properly, we need to know the CRTC's DPMS mode.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Currently, the indexes are off by 4 because of the scroll buttons.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Call drmModeDirtyFB and check the return value to detect whether the
driver support for damage tracking is present, only initialize it in
that case.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
dispatch_dirty_region was only returning -EINVAL error codes,
otherwise it would return 0. The kernel returns -ENOSYS when the
driver doesn't support damage tracking, so dispatch_dirty would never
see the error and never disable damage tracking.
Pass all errors back from dispatch_dirty_region and let dispatch_dirty
deal with them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Gets rid of gcc 4.8 warnings:
xf86AutoConfig.c:211:9: warning: nested extern declaration of
'xf86SolarisFbDev' [-Wnested-externs]
sun_VTsw.c:44:1: warning: no previous prototype for 'xf86VTRelease'
[-Wmissing-prototypes]
sun_VTsw.c:59:1: warning: no previous prototype for 'xf86VTAcquire'
[-Wmissing-prototypes]
and ensures caller & definition stay in sync.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This just calls the existing function to create the relevant Xv
adaptor and hook it up.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Hidden cursors also have their image updated; re-enabling the cursor
each time the image is set will cause it to re-appear.
* Unifies the code that was in drmmode_load_cursor_argb and
drm_mode_show_cursor and moves it to a new drmmode_set_cursor
* Add a new boolean, 'cursor_up', to the per-crtc
private data to track whether the cursor should be displayed.
* Call drmmode_set_cursor from drm_mode_show_cursor and, if
the cursor should be displayed, from drm_mode_load_cursor_argb.
v2: Call drmModeSetCursor2 when loading a new cursor image if the
cursor should be displayed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Solaris already makes the page at address 0 inaccessible by default to
catch NULL pointer bugs, we don't need a double secret undocumented flag
to try to make our own hacky attempt at it.
As a bonus, deleting this code removes gcc warning of:
sun_init.c: In function 'xf86OpenConsole':
sun_init.c:103:17: warning: declaration of 'fd' shadows a previous local [-Wshadow]
int fd = -1;
^
sun_init.c:89:9: warning: shadowed declaration is here [-Wshadow]
int fd;
^
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
For performance, Glamor wants to render to tiled buffers, not linear
ones. Using GBM allows us to pick the 3D driver's preferred tiling
modes.
v2: Declare drmmode->gbm as void * if !GLAMOR_HAS_GBM.
v3: Just use a forward declaration of struct gbm_device.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This code is going to be extended to support GBM BOs soon. This small
abstraction removes a lot of direct dumb_bo access, so we can add that
support in one place, rather than putting conditionals at every
pitch/handle/etc access.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The drm kernel API for dumb BOs apparently doesn't include an unmap
ioctl, so we can't do much here. It looks like this code was copied
from libkms, which was also unfinished.
We may as well delete the dead variable that simply gets incremented
and never read.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Eventually, drmmode_display will be able to use GBM for handling
buffers, and won't need dumb_bo. Keeping the display related logic
and buffer object abstraction in separate files seems a bit tidier.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This will need to change when we add GBM support; by pulling it into a
helper function, we should only have to edit one place.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Both branches called ModifyPixmapHeader with essentially the same
parameters. By using new_pixels in the shadowfb case, we can make
them completely the same, and move them out a level, for simplicity.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The _ext variant takes an additional pointer argument, which it now
ignores, thanks to Keith's recent patches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
There were three paths that called eglDestroyImageKHR:
* The front buffer
* The intel driver's flip buffer
* pixmaps under DRI3
This patch unifies the second two by having glamor_destroy_pixmap
always destroy any associaged EGL image. This allows us to stop
storing the back_pixmap pointer in glamor as that was only used to
make sure that buffer was freed at server reset time.
v2: check for valid pixmap_priv before using it in
glamor_egl_destroy_pixmap_image
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
ProcDRI2GetBuffers() tries to validate a length field (count).
There is an integer overflow in the validation. This can cause
out of bound reads and memory corruption later on.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
drmmode_output_init() doesn't touch (the int*) num_dvi and num_hdmi.
Remove both parameters.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't define HAVE_UDEV, that's a remnant from xf86-video-modesetting.
But, we have CONFIG_UDEV_KMS.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we don't glamor_egl_create_textured_screen_ext() in
drmmode_xf86crtc_resize() we end up with a black screen and no client
window(s) visible.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Move the boolean glamor from struct modesetting into struct drmmode for
later re-use in drmmode_display.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xwayland.c:661:1: warning: function 'xwl_log_handler' could be declared with
attribute 'noreturn' [-Wmissing-noreturn]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The count of wchar_t returned by MultiByteToWideChar() includes the terminating
null character, so don't add one to it.
Also, reduce the scope of various length variables
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
If we are the clipboard owner when we are shutdown, we recieve a
WM_RENDERALLFORMATS, to render the clipboard, so it's contents will remain
available to other applications. Unfortunately, this is far too late to do
anything useful with, as the server is waiting for the clipboard thread to exit,
and so can't process requests to convert clipboard contents.
Change so we just do nothing on WM_RENDERALLFORMATS. (I'm not convinced that
WM_RENDERALLFORMATS has ever worked usefully, in any case).
(To make this work, I guess we would need to rearrange the way shutdown works
completely: first synchronously stop the clipboard, then stop the X server)
We also then receive a WM_DRAWCLIPBOARD, perhaps telling us that the available
clipboard formats have changed (as ones which haven't been rendered are now
removed), but the clipboard owner is now the system, not us, which we have to
arrange to ignore.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
It seems that the clipboard thread restart mechanism has been broken for a
while, which can be demonstrated using XDMCP with KDM (e.g. to a Kubutunu 12.04
host)
KDM kills all attached clients, including the clipboard integration client,
which restarts, but then exits on WM_QUIT.
Using PostQuitMessage() in WM_DESTROY is unhelpful, as we may not actually be
quitting the thread, if we just destroyed the window because the clipboard
thread is about to retry, because he WM_QUIT message sticks around, and is
noticed the next time we look at the window message queue and confuses us into
thinking we need to quit.
Sending a WM_DESTROY is apparently never correct anyhow, see [1]
So:
1/ Use DestroyWindow() to destroy the clipboard messaging window when cleaning
up for retry or exit in winClipboardProc (the clipboard thread main proc)
2/ Send a special WM_WM_QUIT message in winClipboardWindowDestroy() from the X
server thread when the X server is resetting.
3/ When processing that WM_WM_QUIT message in the clipboard thread, cause the
clipboard window to PostQuitMessage(), which causes the clipboard thread to
exit.
[1] http://blogs.msdn.com/b/oldnewthing/archive/2011/09/26/10216420.aspx
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Sometimes, particularly with large clipboard pastes to Windows, we could end up
waiting for the timeout to expire, rather than pasting the data.
Various changes to improve reliability:
1. Use XFlush() not XSync() in winProcessXEventsTimeout().
It makes no sense to ensure we have received replies to outstanding requests if
we are going to wait for them using select()
2. Add XFlush() to winClipboardProc()
Make sure we have sent any requests before we wait using select()
3. Don't use FD_ISSET() to check which fd is ready
This looks like a Cygwin select() bug in that it sometimes returns 0 with an
empty fd set before the timeout expires, but a fd appears to be ready.
Add select() return value to debug output when we are warning that this has
happened.
4. Drain event queues before entering select()
Unconditionally drain event queues before entering select(). This seems to be
the recommended way of writing select() and X event processing loops.
winClipboardFlushXEvents() checks using XPending(), and
winClipboardFlushWindowsMessageQueue() checks using PeekMessage() so this is
safe against blocking, but means that may not need to enter select() at all
sometimes.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
xwinclip: Add -noprimary option
Xwin: Add -primary and -noprimary options and tray-menu control
v2:
Use Bool type for fPrimarySelection
Add -noprimary to usage message
Fix indentation in hw/xwin/winwndproc.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
See http://cygwin.com/ml/cygwin-xfree/2013-07/msg00016.html
It looks like the change in a9aca218f5 had some
unforseen consequences.
If the X11 selection contents are not convertable to COMPOUND_TEXT, UTF8_STRING
or STRING format (for example, if it is an image), after those conversion
attempts have failed, we sit in winProcessXEventsTimeout() until the timeout
expires.
It also seems that maybe gnuplot doesn't respond correctly to this sequence of
conversion requests and doesn't reply to some of them, which also causes us to
sit in winProcessXEventsTimeout() until the timeout expires.
The Windows application which has requested the clipboard contents via
GetClipboardContents() is blocked until we return from WM_RENDERFORMAT, so
sitting waiting for this timeout to expire should be avoided.
So instead, explicitly request conversion to the TARGETS target, choose
the most preferred format, and request conversion to that.
Also: if there is no owned selection, there is nothing to paste, so don't bother
trying to convert it.
v2: Fix compilation with -Werror=declaration-after-statement
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Don't pointlessly retrieve just the size of the property, if we are then going
to assume we can retrieve the whole property in one request anyhow...
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Among other things, commit b851ca968b added a
NameWindowPixmap function pointer to ScreenRec, shifting some of the fields
around.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create hw/xfree86/dri2/pci_ids/Makefile.am which includes all of the new
pci id files in the tarballs. Build that from configure.ac, and run it
from dri2/Makefile.am
Signed-off-by: Keith Packard <keithp@keithp.com>
