Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Replaces special handling for Xquartz DDX and scales better to handling
the multiple platforms that now have some level of Dtrace support available.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Without this, configure spits out
../configure: line 15460: ac_fn_c_check_member: command not found
Also anchor the pattern to make it stricter.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Revert "Add shave so that we can see the steaming piles of warnings generated."
This reverts commit 181cc08c89.
shave was left in the xserver 1.7 release/branch to allow developers &
distros time to transition to automake-1.11. xserver 1.8 series will
require automake-1.11 for silencing build noise.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
All input drivers use xf86PostKeyEventP indirectly now and have been since
it exists. I guess that qualifies it as tested - no need to spam the logs.
Reported-by: Felix Wenk
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
libXtst requirement is already implicit since we require xextproto 7.1 and
that doesn't go well with pre 1.0.99.2 versions of libXtst. Nonetheless,
list it explicitly.
Since d044027510 we require dmxproto 2.2.99.1.
Complementing that is libdmx 1.0.99.1 with the dmxext.h header file.
Reported-by: Mark Rosenstand
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Without this, configure spits out
../configure: line 15460: ac_fn_c_check_member: command not found
Also anchor the pattern to make it stricter.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Revert "Add shave so that we can see the steaming piles of warnings generated."
This reverts commit 181cc08c89.
shave was left in the xserver 1.7 release/branch to allow developers &
distros time to transition to automake-1.11. xserver 1.8 series will
require automake-1.11 for silencing build noise.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
All input drivers use xf86PostKeyEventP indirectly now and have been since
it exists. I guess that qualifies it as tested - no need to spam the logs.
Reported-by: Felix Wenk
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Fixes build with dtrace probes on Solaris after efacd7bfd0
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
libXtst requirement is already implicit since we require xextproto 7.1 and
that doesn't go well with pre 1.0.99.2 versions of libXtst. Nonetheless,
list it explicitly.
Since d044027510 we require dmxproto 2.2.99.1.
Complementing that is libdmx 1.0.99.1 with the dmxext.h header file.
Reported-by: Mark Rosenstand
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently the root coordinates may fall into ]-1..0] if the subpixel
remainder is less than 0. Screen coordinates mustn't go below 0, so use
miPointerSetPosition to cap off the remainder if the coordinates are below
0.
This is cheating a bit, a more comprehensive solution to deal with subpixels
correctly when crossing screens is needed. For now, this'll do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Simon Thum <simon.thum@gmx.de>
Keith has shown half the block handlers wrappers are wrong, also
dynamic wrapping/unwrapping from what I can see will happen after
the drivers, so its really accidental ABI, that we can't change
now without modifing drivers. So be safe for 1.7.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Declared-as-sane-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Checking just for root is insufficient since that does not guarantee write/read
permissions in XKM_OUTPUT_DIR (for example with sandbox).
Check if we can write a file, as well as read it later. Otherwise, invoke the
fallback to /tmp
Signed-off-by: Nirbheek Chauhan <nirbheek@gentoo.org>
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch fixes two bugs:
size is calculated as glyph height * padded_width. If the client submits
garbage, this may get above INT_MAX, resulting in a negative size if size is
unsigned. The sanity checks don't trigger for negative sizes and the server
goes and writes into random memory locations.
If the client submits glyphs with a width or height 0, the destination
pixmap is NULL, causing a null-pointer dereference. Since there's nothing to
composite if the width/height is 0, we might as well skip the whole thing
anyway.
Tested with Xvfb, Xephyr and Xorg.
X.Org Bug 23645 <http://bugs.freedesktop.org/show_bug.cgi?id=23645>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
In a follow-up patch we may have glyphs with a NULL picture. To cope with
that, always set the pictures for glyphs to NULL at creation time and cope
with cleaning up such glyphs. Also, since compositing a NULL source doesn't
do a lot anyway, skip trying to do so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The upload in finish access can cause an infinite loop if
UTS returns FALSE in here.
Fixes fd.o bug #24246.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Removing DGA ended up breaking any drivers calling into the old
xf86DiDGAInit function as it tried to see if DGA was already enabled
and ended up crashing if the VT wasn't completely initialized. Oops.
Also, if the driver initializes DGA itself, have the DiDGA
initialization overwrite that information as the DiDGA code will call
ReInit on mode detect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous code was copied and in both cases incorrectly fixed
up the colormaps after resizing the visuals, this patch consolidates
the visual resize + colormaps fixups in one place. This version
also consolidates the vid allocation for the DepthPtr inside the
function.
I'm not 100% sure colormap.[ch] is the correct place for this but
visuals are mostly created in fb and I know thats not the place to
be resizing them.
Fixes fd.o bug #19470.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Return the minimum GLX version supported by all screens. Assume that
DRI2 screens have all the required features for GLX 1.4. Assume that
everyone else can only support GLX 1.2.
Reviewed-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
If -parent is given, don't open up a new window if -screen is given as well.
The commandline option -screen allows to set the depth of the embedded
Xephry instance, even though width and height are autoscaled on -parent.
This patch checks for a -screen parameter after -parent and - if one is
found - delays initializing the screen. The parent window id is stored
temporarily but re-set after a -screen argument.
The following command is thus valid:
Xephyr -parent 1234 -screen 640x480@8 -screen 1024x768
It embeds the first 8-bit screen into window 1234 and opens up a new window
for the second screen. Multiple parent arguments are possible, the screens
are embedded in-order.
X.Org Bug 24144 <http://bugs.freedesktop.org/show_bug.cgi?id=24144>
Tested-by: Vic Lee
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It's deprecated in SnowLeopard. Ben and I both have no idea what it is for. It says something about unicode input, but urxvt seems fine taking in unicode, so /shrug... bye.
(cherry picked from commit 29cb904e4d)
If either width or height of DisplaySize is invalid, assume that the
configuration is invalid and use the DDC-reported values instead.
See Comment 9, Bug 9758.
http://bugs.freedesktop.org/show_bug.cgi?id=9758#c9
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dave Airlie <airlied@redhat.com>
AddGlyph was missing the FreePicture() call that DeleteGlyph used, resulting
in a memory leak when more than one Glyph was added in a RenderAddGlyphs
request.
Since the code in AddGlyph and DeleteGlyph is identical, move into a static
function to avoid such mistakes in the future.
X.Org Bug 23286 <http://bugs.freedesktop.org/show_bug.cgi?id=23286>