Not needed since 6cf844ab69 split out the allocation/manipulation
into the helper function, leaving FindModule just copying the pointer
around, and causing gcc warnings and an unreachable call to free.
Also no longer need to store the combined strlen results in dirlen.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Exposed by recent addition of -Wredundant-decls to default CWARNFLAGS
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Matches what linux_agp already does and prevents gcc from throwing up:
sun_agp.c: In function 'xf86DeallocateGARTMemory':
sun_agp.c:236:40: error: cast to pointer from integer of different size
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This batch is the straightforward set - others are more complex and
need more analysis to determine right size to pass.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Found no calls from current driver modules
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Gets rid of duplicate static copy of optionTypeToString by putting
both callers of that helper function in the same source file.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When we want to print a string, it's okay to just print it.
We don't need to first allocate a buffer 2 bytes bigger than the
string, copy the entire string unmodified to the buffer, print the
buffer, and then leak the buffer (though we AbortDDX 8 lines later,
and then just in case we survived that, call exit as well, so the
leak is short lived, just oh so pointless).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
As long as we're carrying around a compatibility copy in os/strl*.c,
might as well use them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
We don't ship either one, so don't waste time and make confusing log
entries trying to load them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
At least one revision of the AAO reports a 190x110mm maximum size but a
451x113mm mode.
X.Org Bug 41141 <https://bugs.freedesktop.org/show_bug.cgi?id=41141>
Signed-off-by: Ross Burton <ross@linux.intel.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
The Resource database is reset upon regeneration and so the dri2 module
needs to re-register its RESTYPE for the drawable or else it will
clobber the next unsuspecting user of the database. Fortunately, DRI2 is
loaded late in the initialisation sequence and was last up until
xf86-video-intel started using the Resource database to track
outstanding swaps...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
memType is a uint64_t on powerpc. Using memType only really makes
sense for *physical* addresses, which can be 64-bit for 32-bit
systems running on 64-bit hardware.
However, unmapVidMem() only deals with *virtual* addresses, which
are guaranteed to fit into an uintptr_t.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
245cb8e94f fixed xf86RotateDestroy() to actually run its teardown
code, causing the Damage object to properly be re-allocated after a
server regeneration. However the block that does that still thinks the
Rotate layer BlockHandler is wrapped from the last generation, meaning
the shadow pixmap is never re-allocated and the Damage object is never
re-registered, causing a blank screen, and potentially a driver crash
on the next teardown after the server asks it to free a 0x0 Pixmap.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Wherever it's obvious which device we need (keyboard or pointer), use
GetMaster() instead of GetPairedDevice(). It is more reliable in actually
getting the device type we want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xserver's VESA driver's VBE (Vesa BIOS Extensions) code
includes a PanelID probe, which can get a monitor's native
resolution. From this, using CVT formulas, it derives
horizontal sync rate and a vertical refresh rate ranges.
It however, only derives the upper bounds of the ranges, and
the lower bounds cannot de derived. By default, they are set
to hardcoded constants which represent the lowest supported
resolution: 640x480. The constants in vbe.c however, were
not actually derived from forulas, but carried over from
other code from the bad old days, and are not relevant
to flat panel displays. This caused, for example, EEEPC701's
panel, with a native resolution of 800x480, to end up with
a upper bound of the horizontal sync rate that was lower
than the hardcoded lower bound, which of course broke things.
These numbers have been rederived using both my own CVT tool
based on xf86CVTMode(), and using the provided 'cvt' tool
that comes with xserver.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xorg.conf devices had the name and driver set in the DDX's InputInfoPtr list
but not in the option list for those devices. That information was lost when
passing the options into NewInputDeviceRequest. NIDR then refused to start
the devices.
Introduced in xorg-server-1.11.0-250-ge4cd24e
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: James Cloos <cloos@jhcloos.com>
Add nouveau as the first driver on linux for NVIDIA hardware when
driver autoconfiguration is done, as it is more capable than nv.
nv is also kept in the list as it is more widely supported and because
some old cards are not supported by nouveau.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Return value sethae() is becoming void because no caller used it. Also old
msb_set static checked by each caller is replaced by the p.hae static checked
in sethae() when it's called.
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Also remove odd definition MAP_FAILED.
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
DEV_MEM defined in xf86_OSlib.h
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This is missing in commit 'xfree86: move -novtswitch & -sharevts argument
handling up to common layer'
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We've deprecated keyboard a long time ago
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Only use one init path for input devices - through NIDR.
This requires that inp_driver and inp_identifier from the
XF86ConfInputRec are copied over into the options for NIDR to see them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The former strdups for us. If the strdup fails we miss out on the
CorePointer option (default on anyway) and we're likely to fall over soon
anyway, so let's pretend this is the same behaviour.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use the same struct for both InputOption and XF86OptionRec so we don't need
to convert to and fro the two in the config backends.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
If you started an X server with no connected outputs, we pick a default
1024x768 mode, however if you then ran an xvidmode using app against that
server it would segfault the server due to not finding any valid modes.
This was due to the no output mode set code, only adding the modes to the
scrn->modes once, when something called randr 1.2 xf86SetScrnInfoModes would
get called and remove all the modes and we'd end up with 0.
This change fixes xf86SetScrnInfoModes to always report a scrn mode of at
least 1024x768, and pushes the initial configuration to just call it instead
of setting up the mode itself.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=746926
I've seen other bugs like this on other distros so it might also actually fix them.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
It's fairly common to have multiple, identical monitors plugged in. In
that case, it's preferable to run the monitor's preferred mode on each
output, rather than just matching the width & height and end up with
different timings or refresh rates.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The function does not initialize the module so it has no business
loading it. If some user of DuplicateModule expects a module actually
loaded they should use LoadModule.
Signed-off-by: Michal Suchanek <hramrach@centrum.cz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Bug introduced by 9dca441670
xfree86: add a hook to replace the new console handler.
console_handler was not being set, making the server eat up CPU spinning
in WaitForSomething selecting consoleFd over and over again, every time
trying to unregister drain_console without success due to
console_handler being NULL.
Let's just fix the unregistration in xf86SetConsoleHandler() and use that.
But wait, there could be a catch: If some driver replaced the handler using
xf86SetConsoleHandler(), the unregistration in xf86CloseConsole will unregister
that one. I don't understand Xorg well enough to know whether this poses a
problem (could mess up driver deinit somehow or something like that). As it is,
xf86SetConsoleHandler() doesn't offer any way to prevent this (i.e. check which
handler is currently registered).
I had been using it for two days on my machine that previously hit 100% CPU
several times a day. That has now gone away without any new problems appearing.
Signed-off-by: Tomas Trnka <tomastrnka@gmx.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The ABI changed in the previous series of changes, so bump the ABI version for
the next release.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This makes a difference on darwin (and apparently nowhere else)
https://www.gnu.org/s/libtool/manual/libtool.html#Modules-for-libltdl
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Automake:
"Be careful when selecting library components conditionally. Because building
an empty library is not portable, you should ensure that any library
always contains at least one object."
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
This API is apparently semi-deprecated even by XFree86 standards, and
there are only four drivers left using it. Let's start chopping it off.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is slightly draconian, but that API is just awful. In all but
one case in the callers it's used to get a map of some legacy VGA
memory, and it would be cleaner for the caller to just call
pci_device_map_legacy.
The sole exception is in the vesa driver, which uses it to avoid having
to look up which device the BAR belongs to. That's similarly trivial to
fix.
Having done that, Linux's PCI layer is now very small indeed.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
... instead of rolling our own, badly.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
It is kept around to help drivers through the API transition and will be
removed at some point in the future.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
pciaccess handles this now.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
If you haven't ported 2.6 to your architecture in the intervening seven
years, you can keep running older servers.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Per-domain I/O is now something drivers must manually request, and must
keep track of within their own state rather than in the ScrnInfoRec.
It's not really possible to split that into two steps without an
additional intermediate ABI break, so don't even try. Drivers that want
source compatibility should ifdef on the presence of xf86UnmapLegacyIO.
As a fringe benefit, domain-aware I/O is now OS-independent, relying
only on support in pciaccess. Simplify OS PCI setup to reflect this.
The IOADDRESS type is kept around to help drivers through the API
transition and will be removed at some point in the future.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
In fact, don't default to anything; drivers must explicitly say which
kind they want, and they are strongly encouraged to do MMIO if possible.
This is an ABI change in that drivers that don't will crash, but drivers
that are explicit will work with both old and new servers.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is really a vga-specific hack anyway. The only modern driver that
uses it is trident, but it's already loaded vgahw by the time it would
call xf86GetClocks.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
For Zaphod mode screen crossing handling we need to know the size of all
screens together (i.e. the whole desktop size). Store that in the screenInfo to
have it readily available in events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keeping track of which screen the pointer within the input driver is
obsolete now. To bind to a screen, use the transformation matrix instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
https://bugs.freedesktop.org/show_bug.cgi?id=29109
When configured with --disable-mitshm the symbols declared in shmint.h
do not exist. By guarding the include with '#ifdef MITSHM' these
symbols are skipped when generating sdksyms.c with --disable-mitshm.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
It was such an eyesore once rendered in html.
Now it looks like other authors.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Such version information is already written in the appropriate location
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Driver may change screen pixmaps after page flipping that would then
make damage lose track of the root pixmap.
Using root window for shadow damages fixes the problem because
SetWindowPixmap is implemented in shadow code.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When the driver can handle the crtc transform in hardware, it sets
crtc->driverIsPerformingTransform, which turns off both the shadow
layer and the cursor's position-transforming code. However, some
drivers actually do require the cursor position to still be
transformed in these cases. Move the cursor position transform into a
helper function that can be called by such drivers.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
If a driver can use hardware to handle the crtc transform, then
there's no need for the server's shadow layer to do it. Add a crtc
flag that lets the driver indicate that it is handling the transform.
If it's set, consider the transformed size of the screen but don't
actually enable the shadow layer. Also stop adjusting the cursor
image and position.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Use $(SHELL) to run it. Someone may want to build out of a source tree
in a filesystem with the noexec mount flag set.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This does not really handle hotplug (it's handled inside the kernel,
by the 'mux' devices), but uses the wscons console driver
configuration to figure out the keyboard layout and the list of
pointing devices found by the kernel.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
OpenBSD and NetBSD does not support syscons
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Tested-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Since OsInit closes stdin before the xfree86 DDX opens the
console, fstat on stdin will always fail, so it's safe to delete
code that attempts it.
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Tested-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Return errors instead of silently ignoring them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This widens almost all of the float-using code in ptrveloc.[ch] to
doubles, other than values coming from properties which are specified to
be floats by the property API.
Bumps input API to v14 as this changes the AccelScheme signature, as
used by xf86-input-synaptics.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
The xorg.conf manual uses the following convention in most of its
sections:
bold = text to be copied literally to the config file,
italic = a symbolic name to be substituted by a true value.
Some configuration keywords seem to have been changed into generic
options. Prepending Option to the manual entry swapped the
bold-italic logic. This patch restores the convention in the monitor
section and consists of
-.BI "Option " "\*qPreferredMode\*q " \*qstring\*q
+.BI "Option \*qPreferredMode\*q \*q" name \*q
modifications.
Plus a few minor changes (Modes → Mode) and a typo fix.
Signed-off-by: Servaas Vandenberghe
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Recent changes to the server change the default absolute input device
behaviour on zaphods to span the whole desktop too. Since these setups
usually use an xorg.conf, allow the transformation matrix to be specified in
the config as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
In all cases, the pointer was simply type-cast anyway. Let's get some
compile-time type safety going, how about that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Squashed in:
xfree86: Move definition of xf86OptionPtr into separate header file
The pile of spaghettis that is the xfree86 include dependencies make it
rather hard to have a single typedef somewhere that's not interfering with
everything else or drags in a whole bunch of other includes.
Move the xf86OptionRec and GenericListRec declarations into a separate
header.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Swapping the wrong size was never caught because swap{l,s} are macros.
It's clear in the case of Xext/xres.c, that the author believed
client_major/minor to be CARD16 from looking at the code in the first
hunk.
v2: dmx.c fixes from Keith.
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
DDX can now implement validation for swap_limit changes to prevent
configurations that are not support in driver.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
CC: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This allows ddx to set swap_limit if there is more than one back
buffer for drawable. Setting swap_limit has to also check if change
affects a client that is blocked.
This can be used to implement N-buffering in driver with minimal
logic in allocation and selecting next back.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
ReuseBufferNotify hook is called whenever old buffer is reused in DRI2
code.
Driver can use this hook to rewrite the buffer name if hardware requires
shared buffers. Shared buffer might be some hardware limited resources like
framebuffer that is preallocated in boot.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Dear,
A patch I posted on xorg-devel was reviewed and is ready for
inclusion in xserver. Would you be willing to apply the patch so that
it finds its way into the master branch ?
Thank you, Servaas Vandenberghe.
http://lists.x.org/archives/xorg-devel/2011-August/024769.htmlhttp://lists.x.org/archives/xorg-devel/2011-August/024777.html
This patch adds printing of the DisplayMode type bits to
xf86PrintModeline(). It helps to trace the modeline origin and to
understand the initial configured modeline.
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Signed-off-by: Servaas Vandenberghe
Signed-off-by: Keith Packard <keithp@keithp.com>
The video driver ABI was bumped to 11.0 in commit
0de7cec907 because of a change to the
size of ATOM in commit 51f353d0a0. This
also affects extension modules, so the extension ABI version should
have been bumped too.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fortunately, the massive decrease in the cost of whitespace in the past
decade has allowed us to be much more generous with it, and much more
consistent in its application, even for code like this that clearly no
one has ever tried to read.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Use new per-screen privates API instead.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Stop duplicating in each os-support variant before it gets replicated
even further.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Throughout the xserver git history, the generic portion of the int10
module has always used other methods for reading the video BIOS. For
some time now it's been purely libpciaccess based. This commented-out
use of xf86ReadBIOS is entirely superfluous.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Patch produced with:
unifdef -UNO_INLINE -B
This change isn't relevant to the similar code in
hw/xfree86/common/compiler.h, because x86emu is expected to someday move
out of xserver entirely and so should not depend on any xserver headers.
Also, some platforms apparently do have NO_INLINE versions of
compiler.h.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
InputOptions is not switched to use struct list for a future patch to unify
it with the XF86OptionRec.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 43d9edd31e.
This commit was introduced in the 1.2 cycle when hotplugging was less than
ideal (i.e. it didn't exist). From the commit message:
Always add a mouse driver instance configured to send core events, unless
a core pointer already exists using either the mouse or void drivers. This
handles the laptop case where the config file only specifies, say,
synaptics, which causes the touchpad to work but not the pointing stick.
We don't double-instantiate the mouse driver to avoid the mouse moving twice
as fast, and we skip this logic when the user asked for a void core pointer
since that probably means they want to run with no pointer at all.
To get this case above, a user would need to disable hotplugging _and_ have a
xorg.conf that only references one device. This is possible, but not a use-case
we should worry about too much now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Add support for multi-seat-aware input device hotplugging. This
implements the multi-seat scheme explained here:
http://www.freedesktop.org/wiki/Software/systemd/multiseat
This introduces a new X server switch "-seat" which allows configuration
of the seat to enumerate hotplugging devices on. If specified the value
of this parameter will also be exported as root window property
Xorg_Seat.
To properly support input hotplugging devices need to be tagged in udev
according to the seat they are on. Untagged devices are assumed to be on
the default seat "seat0". If no "-seat" parameter is passed only devices
on "seat0" are used. This means that the new scheme is perfectly
compatible with existing setups which have no tagged input devices.
Note that the -seat switch takes a completely generic identifier, and
that it has no effect on non-Linux systems. In fact, on other OSes a
completely different identifier scheme for seats could be used but still
be exposed with the Xorg_Seat and -seat.
I tried to follow the coding style of the surrounding code blocks if
there was any one could follow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Slowly merging the vastly different code-paths.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, just readability improvements. This also gets rid of
the count variable. Count was just used for resizing the null-terminated
list. Since we're not in a time-critical path here at all we can afford to
loop the list multiple times instead of keeping an extra variable around.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
If we find the core device, move all other device pointers forward right
then and there. The break will jump out of the top loop.
They had a special on braces today, so I added some for readability (and
fixed up tab vs space indentation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes.
The options we assign are the ones from the Pointer/Keyboard device so we
might as well use those readable names instead of dev[count-1]->options.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices are core pointers/keyboards by default now anyway, but let's set the
option to some value instead of just NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
It doesn't matter. All devices are core pointer devices by default now
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of just closing the log when everything is done, put one more
message in stating that we're actually terminating. Users or scripts that
look at the Xorg.log will then know that a) the server has terminated
properly and b) why the server terminated (to some degree, given that most
real-world errors will be caused by AbortServer()).
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hotplugged devices, xf86AllocateInput does that for us but the xorg.conf
path is different. Since not all drivers reset the fd during PreInit but may
still call close(pInfo->fd) in all cases, this can terminate the logging
early.
Reproducible: add a wacom driver InputDevice section with no Option Device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xf86ConfigLayout.inputs contains the information from the xorg.conf
file. Passing this into xf86NewInputDevice means the device will get
cleaned up on exit and the pointers in xf86ConfigLayout.inputs are left
dangling. In the second server generation, this results in a server
crash.
Also, rename pDev to pInfo. pDev is pretty much reserved for DeviceIntPtr
types.
Reproducible: AutoAddDevices off and xorg.conf input sections, trigger
server regeneration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices that succeeded during PreInit and DEVICE_INIT but failed in
DEVICE_ON would be deleted through xf86DeleteInput but not removed from the
list of input devices (and not turned off). The result was a double free on
server shutdown.
Fix this by calling RemoveDevice if EnableDevice fails.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
mieqFini() already does the right thing, but it needs to be called by the
various DDXs and the XTest Extension.
X.Org Bug 38634 <http://bugs.freedesktop.org/show_bug.cgi?id=38634>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Acked-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add four new private XKB actions for debugging:
* PrGrbs: print active grabs to the log file
* Ungrab: ungrab all currently active grabs
* ClsGrb: kill clients with active grabs
* PrWins: dump the current window tree to the log file
To use these, you need to modify your XKB maps, e.g. the following to
have Ctrl+Alt+(F9-F12) mapped to the above:
- compat/xfree86:
interpret XF86LogGrabInfo {
action = Private(type=0x86, data="PrGrbs");
};
interpret XF86Ungrab {
action = Private(type=0x86, data="Ungrab");
}
interpret XF86ClearGrab {
action = Private(type=0x86, data="ClsGrb");
}
interpret XF86LogWindowTree {
action = Private(type=0x86, data="PrWins");
}
- symbols/pc:
key <FK09> { type="CTRL+ALT", [ Return, XF86LogGrabInfo ] };
key <FK10> { type="CTRL+ALT", [ Return, XF86Ungrab ] };
key <FK11> { type="CTRL+ALT", [ Return, XF86ClearGrab ] };
key <FK12> { type="CTRL+ALT", [ Return, XF86LogWindowTree ] };
At the moment, this only works if the grabbing client continues to call
AllowEvents, as the server does no event processing at all when a device
is frozen.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Report to find out all non-UTF-8 files created by
cat extensions |xargs -I XXXX find . -name \*.XXXX |while read FILE ; do
if ( iconv -f utf8 -t ucs2 $FILE >/dev/null 2>/dev/null ) ; then
/bin/true
else
echo $FILE
fi
done >>report
Signed-off-by: Matěj Cepl <mcepl@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
[Daniel: git am failed for me, so I redid it. The method listed in the
commit message also failed, so I just used file/grep/iconv. The
results are the same though.]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ConfigNotify is set by DRI2ScreenInit, but not restored to
previous state on close. Fix it.
(I'm preparing a patch for xf86-video-nouveau which detects GPU lockup
after dri2 init and it needs to reinitialize dri2)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Use the new event types so we can pass a valid SBC value to clients.
Fix up the completion calls to use CARD32 instead of CARD64 to match
the new field size.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Introduced in e3f296d91d, when the ifdef DEBUG
around the whole block was removed, but only two of the three ErrorF
switched to DebugF.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
libxorg.la served to collect all the Xorg convenience libraries into one
massive archive to link into Xorg. This made things easy for symbol
resolution, but it tremendously slowed down the build since each change
caused libxorg.la to be rebuilt. This is an extremely slow process of
extracting all the objects from the sub-libraries and recombining them.
Instead, the archives are linked directly into Xorg. The order of the
libraries had to be tweaked a bit to make symbols resolve correctly with
the lower level code moving later in the link command.
As a side effect, since the dtrace objects are now being linked
directly into Xorg, we don't need the SPECIAL_DTRACE_OBJECTS hack to
add them twice.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
The symbols in sdksyms.c cover the entire source tree. In order to make
them resolve when libxorg.la goes away, move the objects from libloader
to Xorg. Unfortunately, this means sdksyms needs to get built again for
the test code.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
When an empty _SOURCES variable is declared, automake will recognize that
only linking is needed.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
This struct was unused and has been effectively removed in
commit 633b81e8ba
Refs: xorg-server-1.10.0-133-g633b81e
Remove the remainder, with an ABI bump to 13.0.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Usage example (tested on a dual-seat PC):
Section "InputClass"
Identifier "keyboard-all"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
MatchLayout "!GeForce|!Matrox"
Driver "evdev"
Option "XkbLayout" "us"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
It disables auto keyboard configuration for layouts "GeForce" and "Matrox".
Note that "" in patterns means "no Layout sections found", e.g.
MatchLayout "GeForce|"
is "in layout GeForce or without explicit layout at all".
Signed-off-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We've broken the ABI with some commit and drivers built against ABI 10
happily segfault now.
(The relevant patch is 51f353d0a0 which
changed the ATOM typedef from unsigned long to uint32_t, thanks to
Cyril Brulebois <kibi@debian.org> for figuring this out)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The user/specs docs now have external references support.
Developers doc are not installed so they do not participate.
However, using a similar makefile shared amongst developers
document reduces maintenance and is forward looking.
Man pages being out of here, reorg developers docs under the same roof.
Drop the obsolete sgml subdir.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only send invalidate events for drawables if some client has requested
some buffers.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Solaris make won't substitute $< in explicit rules, only implicit ones
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Let configure --enable/disable-aiglx control building of AIGLX for all DDXs. Currently
we can't use --enable/disable-aiglx to control if Xwin DDX is built with AIGLX enabled,
as at the moment it's forced off if we aren't building the X.Org DDX DRI or DRI2 loader
Rearrange things a bit, introducing a new automake conditional, AIGLX_DRI_LOADER to
specifically indicate if the X.Org DDX DRI/DRI2 loader convenience library should be
built, and replace the previous X.Org DDX-specific uses of the AIGLX conditional with that
As before, AIGLX_DRI_LOADER is only enabled if --enable-glx, --enable-aiglx and at least one
of --enable-dri or --enable-dri2 are enabled
This allows the general conditional AIGLX to control if AIGLX is built for the XWin DDX as
well
The C #define AIGLX set by AC_DEFINE(AIGLX) seems to be obsolete, I can't find anything
which checks it
Updated for ajax's "glx: Make --disable-dri not disable AIGLX" patch, which allows DRI2
to be enabled independently of DRI1
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
When the smart scheduler is enabled, the VT ioctls (particularly
VT_WAITACTIVE) can be interrupted by the smart scheduler's SIGALRMs.
Previously, this caused the server to immediately continue on to
ScreenInit, almost certainly causing a crash or failure because the X
server that owned the VT hadn't finished cleaning up. As of commit
7ee965a300, it causes a FatalError
instead.
Retrying the ioctl as long as it fails with errno == EINTR fixes the
problem and allows server regenerations to trigger VT switches that
actually succeed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
update_dri2_drawable_buffers() doesn't modify out_count, so pass it
by value.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Don't access invalid memory if calloc() fails to allocate the buffers
array.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
As a good practice and for eventual double frees.
The reason of this patch is due the resilience of xf86XVInitAdaptors, where
for any adaptor failure it's able to keep trying registering the following
ones.
I discussed briefly with Pauli and Ville about a bigger refactoring of such
function, doing it in a way to return instantly when a failure happens; after
all that's how mostly of the other driver functions work. Instead, we just
thought that xf86XVInitAdaptors is wise and cool, and eventually other driver
functions should be even following the main idea of resilience.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When xf86XVFreeAdaptor is called more than once in xf86XVInitAdaptors (it may,
but not often), the conditional being changed in this patch will always take
true path and will keep freeing pAdaptor->pAttributes, thus letting the system
error-prone.
This patch fix such problem checking for a pointer instead the number of
attributes. Such pointer will be deallocated when xf86XVFreeAdaptor is called
first and will not let the code re-run in the following calls. This is a bit
similar how the surroundings code is already doing.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
No functional changes. Spaghetti code for the win! \o/
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Nicolas Peninguy <nico@lostgeeks.org>
introduced in 93ca526892.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Nicolas Peninguy <nico@lostgeeks.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86RandR12.c: In function 'xf86RandR12EnterVT':
xf86RandR12.c:1769:5: warning: ISO C90 forbids mixed declarations and code
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Pointer.c: In function 'xf86parsePointerSection':
Pointer.c:192:5: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This refers to pWin->winSize in some #if 0 code remove it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
each DDX has its own copy, I've taken the darwin one,
though I'm not sure why it needs the pOldClip piece that nobody
else has and the commit msg is like an "Updates from magic land"
type message.
This removes the main uses of pWin->winSize from the DDXen.
v2: drop old clip like ajax suggests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Makes reading the log file a lot easier for those that don't magically
recognise the log spew by the individual drivers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 1564c82417.
The drivers used the top bits of the usage_hint to store driver
private flags (intel, radeon, nouveau).
With EXA we need to get at this data so if we migrate the pixmap we
can create the correct type of pixmap in the driver, however this
commit truncates the usage_hint into 8-bit class and loses all the
good stuff.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
There were two memory leaks in the function: one was the lack of free
for "enabled", the other was the full lack of releasing anything when
configuration was too small. The first issue was fixed by adding the
missing free, the other was addressed by replacing the duplicate
memory releasing sequences with one that is gotoed into.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Devices usually enable SIGIO processing in EnableDevice. CheckMotion
initialises the pointer sprite, sends Enter/Leave events, etc. This leaves
us with a small window where events may be processed without the sprite or
pointer position (as seen from the protocol) is valid.
Block signals during this window.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
configScreen used a dynamically allocated buffer for XF86ConfScreenRec
when conf_screen argument was NULL. This pointer was never stored
anywhere, nor was it released, so this patch makes the function use
automatically allocated storage in that situation.
[ajax: minor grammar fix]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The class field was unused for pixmaps, and we don't have enough classes
to justify a whole uint32 anyway.
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
v2: Slightly more obvious sizing math.
==14882== Invalid write of size 2
==14882== at 0x6750267: VBEGetVBEInfo (vbe.c:400)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
==14882== Address 0x4f32fa8 is 72 bytes inside a block of size 73 alloc'd
==14882== at 0x4A0640D: malloc (vg_replace_malloc.c:236)
==14882== by 0x675024B: VBEGetVBEInfo (vbe.c:398)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
sdksyms.c is constructed by processing header files with the C
preprocessor. Its contents will vary depending on the precise
configuration options, and so must depend on the config header
files.
We have one header file which is always changed when any config option
is modified called do-not-use-config.h (which may want a different
name at some point), so make sdksyms.c depend on that file.
Also, we don't want to ship this file; it always needs to be
built. So, include it in the nodist_libloader_la_SOURCES list to
prevent it from being added to the tarball.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Since commit b8d9c5ff removed commonOptions, we now
need to append the "Core{Keyboard,Pointer}" options to
the existing list.
Fixes passing options to devices confirured in xorg.conf
on systems where autoaddevices is false.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Non-GNU makes don't deal with the sinclude or -include variants that
allow Makefile stubs to be created and then included during the build.
Instead, create an empty file at the end of configure so that the
regular include statement can be included. This is how automake handles
automatic source dependencies.
In order to trick automake into not processing the include statement, a
variable is used.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>
In OpenBSD removed support PCCONS in 2002 year
http://marc.info/?l=openbsd-cvs&m=102435816424294&w=2
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Signed-off-by: Keith Packard <keithp@keithp.com>
Inferring modes from sync ranges is only valid if the monitor says it's
valid. If the monitor says it's valid, then we'll have already added
those modes during EDID block parse. If it doesn't, then we should
believe it.
If there's no EDID for an output, but sync ranges from the config, we'll
still add default modes as normal.
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Same result, but now also triggers on slave keyboards that send pointer
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
The calling for allocate_or_reuse_buffer may fail due to some reason, e.g. out of memory.
If the buffers[] were not initialized to be NULL, the following err_out may try to access an illegal memory, which will cause X crash afterward.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Justin Dou <Justin.Dou@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows set_percent_option in synaptics to work as described,
and should generally enable to check option syntax without log spam.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InitInput simply initialises all input devices now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Did you know that anonymous enums with function scope will not only
override the enum values from global scope, but will be treated as
entirely different types? C's type system just rules.
xf86Crtc.c: In function 'handle_detailed_monrec':
xf86Crtc.c:1555:33: warning: comparison between 'enum det_monrec_source' and 'enum <anonymous>'
xf86Crtc.c:1562:33: warning: comparison between 'enum det_monrec_source' and 'enum <anonymous>'
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
It's broken for devices with BARs above 4G, and the sysfs method should
work everywhere anyway. As a pleasant side effect, this fixes some
warnings:
fbdevhw.c: In function 'fbdev_open_pci':
fbdevhw.c:333:4: warning: cast from pointer to integer of different size
fbdevhw.c:334:4: warning: cast from pointer to integer of different size
fbdevhw.c:336:4: warning: cast from pointer to integer of different size
fbdevhw.c:337:4: warning: cast from pointer to integer of different size
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
helper_exec.c: In function 'pciCfg1in':
helper_exec.c:507:4: warning: passing argument 2 of 'pci_device_cfg_read_u32' from incompatible pointer type
/usr/include/pciaccess.h:153:5: note: expected 'uint32_t *' but argument is of type 'CARD32 *'
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
xf86VidMode.c: In function 'VidModeGetMonitorValue':
xf86VidMode.c:637:19: warning: 'ret.i' may be used uninitialized in this function
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If none of Xv ports were affected by window tree modifications we don't
want scan the port list. To avoid useless scanning of port list
PostValidateTree hook is only registered when ClipNotify was called for
any port.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
ValidateTree calls first ClipNotify and later might call
WindowExposures. To avoid useless double reput ClipNotify delays reput
to WindowExposures or PostValidateTree.
PostValidatTree checks all ports if there is clip changes. On clip
changes reput is done to move or scale the overlay.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
If window gets exposed but clipboxes doesn't change drivers would avoid
color key fill. This makes XResizeWindo&co to lose colorkey if
background is painted.
To help drivers to avoid filling colorkey for each put server can
provide helper function if there is exposed areas. Server can subtract
exposed areas from filled region.
As a side effect we can avoid useless color key fills if window only
moves in screen without background fills.
v3:
* Change tracking to filled area to account for client initiated clip
changes
* Make overlaid XvPutImage behavior like textured XvPutImage or PutImage
* Make region dynamically allocated only when required.
v4:
* Simplify new driver interface to reduce duplicate code
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>