We've deprecated keyboard a long time ago
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Only use one init path for input devices - through NIDR.
This requires that inp_driver and inp_identifier from the
XF86ConfInputRec are copied over into the options for NIDR to see them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The former strdups for us. If the strdup fails we miss out on the
CorePointer option (default on anyway) and we're likely to fall over soon
anyway, so let's pretend this is the same behaviour.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use the same struct for both InputOption and XF86OptionRec so we don't need
to convert to and fro the two in the config backends.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
It's fairly common to have multiple, identical monitors plugged in. In
that case, it's preferable to run the monitor's preferred mode on each
output, rather than just matching the width & height and end up with
different timings or refresh rates.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The function does not initialize the module so it has no business
loading it. If some user of DuplicateModule expects a module actually
loaded they should use LoadModule.
Signed-off-by: Michal Suchanek <hramrach@centrum.cz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Bug introduced by 9dca441670
xfree86: add a hook to replace the new console handler.
console_handler was not being set, making the server eat up CPU spinning
in WaitForSomething selecting consoleFd over and over again, every time
trying to unregister drain_console without success due to
console_handler being NULL.
Let's just fix the unregistration in xf86SetConsoleHandler() and use that.
But wait, there could be a catch: If some driver replaced the handler using
xf86SetConsoleHandler(), the unregistration in xf86CloseConsole will unregister
that one. I don't understand Xorg well enough to know whether this poses a
problem (could mess up driver deinit somehow or something like that). As it is,
xf86SetConsoleHandler() doesn't offer any way to prevent this (i.e. check which
handler is currently registered).
I had been using it for two days on my machine that previously hit 100% CPU
several times a day. That has now gone away without any new problems appearing.
Signed-off-by: Tomas Trnka <tomastrnka@gmx.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The ABI changed in the previous series of changes, so bump the ABI version for
the next release.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This makes a difference on darwin (and apparently nowhere else)
https://www.gnu.org/s/libtool/manual/libtool.html#Modules-for-libltdl
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Automake:
"Be careful when selecting library components conditionally. Because building
an empty library is not portable, you should ensure that any library
always contains at least one object."
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
This API is apparently semi-deprecated even by XFree86 standards, and
there are only four drivers left using it. Let's start chopping it off.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is slightly draconian, but that API is just awful. In all but
one case in the callers it's used to get a map of some legacy VGA
memory, and it would be cleaner for the caller to just call
pci_device_map_legacy.
The sole exception is in the vesa driver, which uses it to avoid having
to look up which device the BAR belongs to. That's similarly trivial to
fix.
Having done that, Linux's PCI layer is now very small indeed.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
... instead of rolling our own, badly.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
It is kept around to help drivers through the API transition and will be
removed at some point in the future.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
pciaccess handles this now.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
If you haven't ported 2.6 to your architecture in the intervening seven
years, you can keep running older servers.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Per-domain I/O is now something drivers must manually request, and must
keep track of within their own state rather than in the ScrnInfoRec.
It's not really possible to split that into two steps without an
additional intermediate ABI break, so don't even try. Drivers that want
source compatibility should ifdef on the presence of xf86UnmapLegacyIO.
As a fringe benefit, domain-aware I/O is now OS-independent, relying
only on support in pciaccess. Simplify OS PCI setup to reflect this.
The IOADDRESS type is kept around to help drivers through the API
transition and will be removed at some point in the future.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
In fact, don't default to anything; drivers must explicitly say which
kind they want, and they are strongly encouraged to do MMIO if possible.
This is an ABI change in that drivers that don't will crash, but drivers
that are explicit will work with both old and new servers.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is really a vga-specific hack anyway. The only modern driver that
uses it is trident, but it's already loaded vgahw by the time it would
call xf86GetClocks.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
https://bugs.freedesktop.org/show_bug.cgi?id=29109
When configured with --disable-mitshm the symbols declared in shmint.h
do not exist. By guarding the include with '#ifdef MITSHM' these
symbols are skipped when generating sdksyms.c with --disable-mitshm.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
It was such an eyesore once rendered in html.
Now it looks like other authors.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Such version information is already written in the appropriate location
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Driver may change screen pixmaps after page flipping that would then
make damage lose track of the root pixmap.
Using root window for shadow damages fixes the problem because
SetWindowPixmap is implemented in shadow code.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When the driver can handle the crtc transform in hardware, it sets
crtc->driverIsPerformingTransform, which turns off both the shadow
layer and the cursor's position-transforming code. However, some
drivers actually do require the cursor position to still be
transformed in these cases. Move the cursor position transform into a
helper function that can be called by such drivers.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
If a driver can use hardware to handle the crtc transform, then
there's no need for the server's shadow layer to do it. Add a crtc
flag that lets the driver indicate that it is handling the transform.
If it's set, consider the transformed size of the screen but don't
actually enable the shadow layer. Also stop adjusting the cursor
image and position.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Use $(SHELL) to run it. Someone may want to build out of a source tree
in a filesystem with the noexec mount flag set.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
