With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
Most of these drivers didn't work. ati was the only one that even came
close. The igs, ipaq, itsy, pcmcia, savage, sis530, trident, trio, ts300,
and vxworks directories have never built since modularisation, so clearly
no one can miss them.
KdInitOutput() used to enable Composite when it was disabled by default,
but now this hack prevents ``-extension Composite'' from working.
Remove it, as Composite is enabled by default anyway.
glcore gets linked with -ldl, -lpthread for s3tc and glapi
xserver needs
DLOPEN_LIBS - to dlopen the glcore dso
LD_EXPORT_SYMBOLS_FLAG - to export symbols for glcore to use
the ld flag is added to kdrive only when GLX is enabled, the net overhead for
Xephyr is ~155KB, could be reduced with --dynamic-list.
When starting up kdrive/fbdev, if the current framebuffer mode is sensible use
that unless told otherwise.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
A few pieces of code were abusing this define for other purposes, which are
converted to #ifndef DEBUG instead. There should be no ABI consequences
to this change.
The rationale is that having the define in xorg-server.h also disables
assert() drivers, which is unexpected, and also difficult to avoid since
xorg-server.h is included in their config.h, and you can't put a #undef in
config.h. As for removing it from the server instead of moving it to an
internal header, we probably shouldn't have unnecessary assert()s in
critical server paths anyway, and if we do we could #define NDEBUG in the
specific cases needed.
When an expose event happens on an host GL window paired with an
internal drawable, route that expose event to the clients listening
to the expose event on the internal drawable.
Rather than letting the DDX allocate the events, allocate them once in the DIX
and just pass it around when needed.
DDX should call GetEventList() to obtain this list and then pass it into
Get{Pointer|Keyboard}Events.
These hints allow an acceleration architecture to optimize allocation of certain
types of pixmaps, such as pixmaps that will serve as backing pixmaps for
redirected windows.
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitScreen): try and detect when the host has no
DRI support. In that case, switch to the -nodri behaviour.
When in the -nodri case, make sure not to skip glx visual
initialisation.
* hw/kdrive/ephyr/ephyrinit.c:
(ddxProcessArgument): disabling visual init here
is bad because it gets disabled even when we want
to use software GL, leading to Xephyr :1 -nodri
crashing in mesa.
We can now launch GL or XV apps in any of the
Xephyr screens we want.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window):
(hostx_create_window): make these functions be screen
number aware.
* hw/kdrive/ephyr/XF86dri.c : fix some compiler warnings.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIQueryDirectRenderingCapable),
(ephyrDRIOpenConnection),
(ephyrDRIAuthConnection),
(ephyrDRICloseConnection),
(ephyrDRIGetClientDriverName),
(ephyrDRICreateContext),
(ephyrDRIDestroyContext),
(ephyrDRICreateDrawable),
(ephyrDRIGetDrawableInfo),
(ephyrDRIGetDeviceInfo): in all those functions, don't forward
the screen number we receive - from the client - to the host X.
We (Xephyr) are always targetting the same X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrdriext.c:
(EphyrMirrorHostVisuals): make this duplicate the visuals of the host X
default screen into a given Xephyr screen. This way we have a chance
to update the visuals of all Xephyr screen to make them mirror those
of the host X.
(many other places): specify screen number where required by the api
change in hostx.h.
* hw/kdrive/ephyr/ephyrglxext.c: specify screen number where required
by the api change in hostx.h
* hw/kdrive/ephyr/ephyrhostglx.c: don't forward the screen number we
receive - from the client - to the host X.
We (Xephyr) are always targetting the same
X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrhostvideo.c,h: take in account the screen number received
from the client app. This is useful to know on which Xephyr screen we
need to display video stuff.
* hw/kdrive/ephyr/ephyrvideo.c: update this to reflect the API change
in hw/kdrive/ephyr/ephyrhostvideo.h.
(ephyrSetPortAttribute): when parameters are not valid
- they exceed their validity range - send them to the host anyway
and do not return an error to clients.
Some host expose buggy validity range, so rejecting client for that
is too harsh.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_has_xshape),
(hostx_has_glx),
(hostx_has_dri): added these new entry points
* hw/kdrive/ephyr/ephyrdriext.c:
(ephyrDRIExtensionInit):
check presence of DRI and XShape extensions before
trying to use them.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrHijackGLXExtension):
check presence of glx extension before we use it.
* hw/kdrive/src/Makefile.am: use fb/fbcmap_mi.c
and not fb/fbcmap.c. This allows kdrive to take advantage of
extensions redefining the entry points of micmap.c stuff.
For instance it allows Xephyr to have a working GL, which is not
possible otherwise, because GL redefines mInitVisualsProc
to initialise its visuals.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): force the back clipping rects
to equal the front clipping rects.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly overclip the clipping rects we
got from the client. This bug fixes a clipping rect that was too
small in height, basically. Also fix a possible mem corruption.
* hw/kdrive/ephyr/hostx.c:
(hostx_set_window_geometry): remove a useless XSync
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitialize): cleanup ephyrDRI extension init.
remove functions that belongs in ephyrdriext.c .
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRICreateDrawable): create the drawable on the host X peer
window, not on the host xephyr main window.
(ephyrDRIGetDrawableInfo): get drawable info of the host X peer
window.
* hw/kdrive/ephyr/ephyrdriext.c: make ephyr DRI extention wrap
a bunch of screen ops so that it can update the host X peer
window whenever DRI bound drawable are moved in Xephyr.
Also code the building blocks of the management of the
host X window peer.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_create_window): added this new entry point
(hostx_destroy_window): ditto
()hostx_set_window_geometry): ditto
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): quickly hook
this into getting the drawable info from the host
X server. For the time being, this only gets the drawable info
of the Xephyr main window in the host. It should really get
the info of a the peer drawable in the host X. So there should be a
peer drawable to begin with.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): some cleanups. Properly get the
the drawable info otherwise there is a host X hang.
* hw/kdrive/ephyr/ephyrhostglx.c: do not
(ephyrHostGLXQueryVersion): do not use C bindings of the glx protocol
calls. Some of those actually access DRI context directly, resulting
in the context having three clients. Instead all XF86DRI proto
fowarding request should be coded by hand and only forward the
protocol requests
* hw/kdrive/ephyr/ephyrglxext.c:
fixed various logging functions
(ephyrGLXGetStringReal): make sure all the string is sent to clients
including the ending zero.
* hw/kdrive/ephyr/ephyrhostglx.c:
(ephyrHostGLXGetStringFromServer): better error handling.
(ephyrHostGLXSendClientInfo): ditto.
(ephyrHostGLXMakeCurrent): ditto
* hw/kdrive/ephyr/ephyr.c:
(EphyrDuplicateVisual): when duplicating the
visual, copy the color component masks and the class
from the hostX
(EphyrMirrorHostVisuals): don't mix blue and green mask.
* hw/kdrive/ephyr/ephyrdri.c: add more logs.
(ephyrDRICreateDrawable): actually implement this.
for the moment it creates a DRI drawable for the hostX window,
no matter what drawable this call was issued for.
(ephyrDRIGetDrawableInfo): actually implemented this.
for the moment the drawable info queried for its attrs is the
Xephyr main main window.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly hook this dispatch
function to the ephyrDRIGetDrawableInfo() function.
* hw/kdrive/ephyr/ephyrglxext.c: add a bunch of GLX implementation hooks
here. Hijack some of the xserver GLX hooks with them. Still need to
properly support byteswapped clients though.
* hw/kdrive/ephyr/ephyrhostglx.c,h: actually implemented the protocol
level forwarding functions used by the GLX entr points in
ephyrglxext.c. Here as well, there are a bunch of them, but we are
far from having implemented all the GLX calls.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window_attributes): added this new entry point
(hostx_allocate_resource_id_peer): added this to keep track of
resource IDs peers: one member of the peer is in Xephyr, the other
is in host X.
(hostx_get_resource_id_peer): ditto.
* hw/kdrive/ephyr/ephyr.c: make Xephyr mirror
the visuals of the host X upon startup. This
is important for GLX client apps.
* hw/kdrive/ephyr/hostx.c,h: add a hostx_get_visuals_info()
to get the visuals of the host X.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrGLXGetFBConfigsSGIX): proxy the GLXGetFBConfigsSGIX call.
It is a vendor extension to get the visual configs as a list of
name/value pairs.
(ephyrHijackGLXExtension): hijack the VendorPriv_dispatch_info
dispatch table to register our implementation of GLXGetFBConfigsSGIX
(ephyrGLXGetFBConfigsSGIXReal): added this where the real
implementation of GLXGetFBConfigsSGIX is. It support bytes swapping.
(ephyrGLXGetFBConfigsSGIX,ephyrGLXGetFBConfigsSGIXSwap): these are
the dispatch entry points. They just call
ephyrGLXGetFBConfigsSGIXReal.
* hw/kdrive/ephyr/ephyrhostglx.c,h: reorganize the proxies to get
visual params from the host so that they clearly support the different
methods of doing so.
* hw/kdrive/ephyr/Makefile.am: add the proxy extension to
ephyr. The proxy extension is an experimental extension that
forwards protocol packets targeted at a given extension to the
host X.
* hw/kdrive/ephyr/ephyr.c: init proxy ext.
* hw/kdrive/ephyr/ephyrhostproxy.c,h: added this new file as part of the
proxy extension.
* hw/kdrive/ephyr/ephyrproxyext.c,h: ditto
* hw/kdrive/ephyr/hostx.c: add the hostx_get_get_extension_info() entry
point.
* hw/kdrive/ephyr/XF86dri.c: re format this correctly.
Make function decls honour the Ansi-C standard.
* hw/kdrive/ephyr/ephyr.c: protect glx/dri related
extension initialisation with the XEPHYR_DRI
macro. Initialize the GLX ext hijacking
at startup.
* hw/kdrive/ephyr/ephyrdri.c: add more logging to ease debugging
* hw/kdrive/ephyr/ephyrdriext.c: ditto. reformat.
* hw/kdrive/ephyr/ephyrglxext.c,h: add this extension to
proxy GLX requests to the host X. started to proxy those nedded to
make glxinfo work with fglrx. Not yet finished.
* hw/kdrive/ephyr/ephyrhostglx.c,h: put here the actual
Xlib code used to hit the host X server because Xlib stuff cannot be
mixed with xserver internal code, otherwise compilation erros due to
type clashes happen. So no Xlib type should be exported by the
entrypoints defined here.
* hw/kdrive/ephyr/ephyrhostvideo.c/h:
(ephyrHostXVStopVideo): add this entry point.
* hw/kdrive/ephyr/ephyrvideo.c:
Basically add ReputImage and StopVideo implementations.
Now, when other windows obscur the video window, the reclipping
seems to be well handled using StopVideo and ReputImage.
To do this, I was obliged to save the frame in PutImage, so
that I could resend it un ReputImage.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivQueryHostAdaptors): properly set
port private luke. This fixes a crash when
the host Xv supports multiple ports.
Make sure number of ports cannot be zero.
* configure.ac,include/dix-config.h.in: define the XEPHYR_DRI macro.
define it when --enable-xephyr and --enable-dri are both turned on.
* hw/kdrive/ephyr/XF86dri.c: copy this from mesa source to enable
Xephyr to talk DRI protocol the host X. In mesa, this is used by libGL.so to
talk DRI protocol with the server.
* hw/kdrive/ephyr/ephyr.c: finally initialise the DRI extension
in the ephyrInitScreen() function.
* hw/kdrive/ephyr/ephyrdri.c,ephyrdriext.c: safeguard the compilation
using the XEPHYR_DRI macro.
* hw/kdrive/ephyr/ephyrdriext.c: added this to implement a DRI extension
into Xephyr. Normally the DRI extension is only present in the
xfree86 server, but I have ported it to Xephyr. The extension calls
functions that declared/defined in ephyrdri.h ephyrdri.c that
forwards the DRI calls to the host X. It does not work yet, as this
entry is just to put the big bricks in place.
* hw/kdrive/ephyr/ephyrdri.c,h: declaration & definition of the
DRI client API that would hit the hostX server.
* hw/kdrive/ephyr/GL/internal/dri_interface.h: added this, otherwise
inclusion of /usr/include/X11/dri/xf86dri.h won't compile
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVPutImage): make this support clipping region.
The clipping region is propagated to host using XSetClipRectangles.
This changes the API of ephyrHostXVPutImage.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrPutImage): propagate the clipping region to the new
ephyrHostXVPutImage() entry point.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrInitVideo) make the EphyrXVPriv object be a
singleton instance, otherwise a new object is created at each
generation.
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVAdaptorHasPutVideo): detect if
host X has the PutVideo call.
(ephyrHostXVAdaptorHasPutStill): detect if
host X has the PutStill call
(ephyrHostXVAdaptorHasPutImage): detect if
host X has the PutImage call
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivQueryHostAdaptors): make sure to create
atoms for attribute names otherwise subsequent
calls to get/set attribute from clients won't work.
(ephyrXVPrivSetAdaptorsHooks): don't hardwire advertising
of the PutImage call. Instead, advertise the calls advertised
by the host.
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVLogXErrorEvent): add this to
log X error events. Heavily copied from libx11
(ephyrHostXVErrorHandler): new x error handler that
logs the error but does not exits.
(ephyrHostXVInit): add this to be called at the beginning
of xvideo lifetime. It sets an xerror handler that does not
exit.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivIsAttrValueValid): this validates an attribute
value.
(ephyrSetPortAttribute): before setting an attribute,
validate the new value so that we don't send a buggy
request to host X.
* hw/kdrive/ephyr/*.c: fix case in ephyrvideo code.
* hw/kdrive/ephyr/ephyr.c: fix a typo
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(EphyrHostXVPutImage): first implementation. does not
support clipping regions yet.
* hw/kdrive/ephyr/ephyrvideo.c:
(DoSimpleClip): clip using a clipping box. Does not
support regions yet.
(EphyrPutImage): first implementation.
Uses a simple clipping rectangle, no region yet.
* hw/kdrive/ephyr/hostx.c:
(hostx_get_window): added this to get the main
window of the host x.
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(EphyrHostXVQueryImageAttributes): add this call. It calls
XvQueryBestSize xserver entry point. It uses the protocol
level machinery because Xvlib does not expose that entry point
as a C function.
(EphyrHostXVQueryBestSize): added this wrapper around XvQueryBestSize().
(EphyrHostGetAtom, EphyrHostGetAtomName): added this to get
an atom or atom name from the host server
* hw/kdrive/ephyr/ephyrvideo.c:
(EphyrSetPortAttribute): convert the atom into an host server
server atom before attacking the host server with it, because in
in its current form, the input atom is only valid in xephyr.
This fix makes this call work.
(EphyrGetPortAttribute): ditto.
(EphyrQueryBestSize): implement this.
(EphyrQueryImageAttributes): implement this.
* hw/kdrive/ephyr/ephyrhostvideo.c:
(EphyrHostXVAdaptorGetVideoFormats): properly get visual class instead of
returning the visual id.
(EphyrHostXVQueryEncodings): properly copy the fields because simple casting does
truncate some fields.
(EphyrHostAttributesDelete): XFree the whole array instead of trying to free invidial members.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrInitVideo): fix a typo
(EphyrXVPrivQueryHostAdaptors): set XvWindowMask mask to adaptors type.
use host adaptor name. Don't forget to set nImages field.
(EphyrXVPrivRegisterAdaptors): report an error when KdXVScreenInit() fails.
* This patch adds multiscreen support to Xephyr. For instance,
the command line : "Xephyr :4 -ac -screen 320x240 -screen 640x480"
will launch with two "screens" - namely two main windows.
The first main window represents a screen that has the number :4.0, with
a geometry of 320x240 pixels, and the second one represents a screen
that has the number :4.1 with a geometry of 640x480.
The command line: "DISPLAY=:4.1 xclock" will launch the xclock program
on the second screen, for intance.
* this patch was edited by Dodji Seketeli <dodji@openedhand.com> for:
- better style compliance with the rest of the Xephyr code
- make sure Xephyr could be launched with no -screen option. By
default that creates a default screen of 640x480 pixel like before
- display full titles on the windows - with insctructions to grab
keyboard and mouse - like before.
Removes "LookupKeyboardDevice" and "LookupPointerDevice" in favor of
inputInfo.keyboard and inputInfo.pointer, respectively; all use cases
are non-XI compliant anyway.
This was an attempt to avoid scratch gc creation and validation for paintwin
because that was expensive. This is not the case in current servers, and the
danger of failure to implement it correctly (as seen in all previous
implementations) is high enough to justify removing it. No performance
difference detected with x11perf -create -move -resize -circulate on Xvfb.
Leave the screen hooks for PaintWindow* in for now to avoid ABI change.
* configure.ac: re-sort Kdrive libs so that symbols get properly resolved.
Basically, all some libs are present in both $KDRIVE_LIBS and $XSERVER_LIBS,
and some libs orders are not correct. So I made sure Kdrive servers don't have
to link against $KDRIVE_LIBS *and* $XSERVER_LIBS. They just have to link
against $KDRIVE_LIBS now.
* hw/kdrive/*/Makefile.am: update those makefile to reflect the change in configure.ac
Licensing issues of these files include:
- They claim to be licensed under the GPL, yet we haven't allowed that in the
xserver repository in the past.
- They refer the user to the top of the tree for GPL license text, yet it isn't
there.
- They claim to be derived from the (MIT-licensed) ati kdrive code, yet don't
follow the licensing terms of those files.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
Composite's automatic redirection is a more general mechanism than the
ad-hoc BS machinery, so it's much prettier to implement the one in terms
of the other. Composite now wraps ChangeWindowAttributes and activates
automatic redirection for windows with backing store requested. The old
backing store infrastructure is completely gutted: ABI-visible structures
retain the function pointers, but they never get called, and all the
open-coded conditionals throughout the DIX layer to implement BS are gone.
Note that this is still not a strictly complete implementation of backing
store, since Composite will throw the bits away on unmap and therefore
WhenMapped and Always hints are equivalent.
I exported the evdev driver to Xephyr server. I'm running it using something
like:
$ ./hw/kdrive/ephyr/Xephyr :1 -mouse evdev,,device=/dev/input/event4 -keybd \
evdev,,device=/dev/input/event1,xkbmodel=abnt2,xkblayout=br
It also closes /#5668.
and the Xephyr virtual mouse keeps alive. With this patch the semantic changes
turning '-pointer' && 'Xephyr virtual mouse' always false.
Now we can open a device pointer and pass its options in Xephyr's command line
without having other pointer unused.
The former <X11/extensions/XKBsrv.h> has been pulled into the server now as
include/xkbsrv.h, and the world updated to look for it in the new place,
since it made no sense to define server API in an extension header. Any
further work along this line will need to do similar things with XKBgeom.h
and friends.
Only try to build Linux support on Linux. We should probably disable all
OS-dependent DDXes if we don't have a workable OS (and only build
Xephyr/Xfake), but that's future work.
Move the bell into an OS function, and use that if it's declared; else,
fall back to using the driver's function.
Remove the Linux keyboard bell function; just move it into the OS layer.
Use named initialisers when converting the old structures, and eliminate
unused functions.
Add KdOsAddInputDrivers, which adds all relevant input drivers.
Could possibly be refactored to KdAddInputDrivers, which called through
OsFuncs to a new function, if it existed.
Move the keymap copying to event processing time (in
ProcessInputEvents), instead of being at event enqueuing time.
Break SetCore{Pointer,Keyboard} out into separate functions.
Change mieqEnqueue to take a device pointer, that asks for the
_original_ device associated with this event.
