With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
Most of these drivers didn't work. ati was the only one that even came
close. The igs, ipaq, itsy, pcmcia, savage, sis530, trident, trio, ts300,
and vxworks directories have never built since modularisation, so clearly
no one can miss them.
KdInitOutput() used to enable Composite when it was disabled by default,
but now this hack prevents ``-extension Composite'' from working.
Remove it, as Composite is enabled by default anyway.
glcore gets linked with -ldl, -lpthread for s3tc and glapi
xserver needs
DLOPEN_LIBS - to dlopen the glcore dso
LD_EXPORT_SYMBOLS_FLAG - to export symbols for glcore to use
the ld flag is added to kdrive only when GLX is enabled, the net overhead for
Xephyr is ~155KB, could be reduced with --dynamic-list.
When starting up kdrive/fbdev, if the current framebuffer mode is sensible use
that unless told otherwise.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
A few pieces of code were abusing this define for other purposes, which are
converted to #ifndef DEBUG instead. There should be no ABI consequences
to this change.
The rationale is that having the define in xorg-server.h also disables
assert() drivers, which is unexpected, and also difficult to avoid since
xorg-server.h is included in their config.h, and you can't put a #undef in
config.h. As for removing it from the server instead of moving it to an
internal header, we probably shouldn't have unnecessary assert()s in
critical server paths anyway, and if we do we could #define NDEBUG in the
specific cases needed.
When an expose event happens on an host GL window paired with an
internal drawable, route that expose event to the clients listening
to the expose event on the internal drawable.
Rather than letting the DDX allocate the events, allocate them once in the DIX
and just pass it around when needed.
DDX should call GetEventList() to obtain this list and then pass it into
Get{Pointer|Keyboard}Events.
These hints allow an acceleration architecture to optimize allocation of certain
types of pixmaps, such as pixmaps that will serve as backing pixmaps for
redirected windows.
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitScreen): try and detect when the host has no
DRI support. In that case, switch to the -nodri behaviour.
When in the -nodri case, make sure not to skip glx visual
initialisation.
* hw/kdrive/ephyr/ephyrinit.c:
(ddxProcessArgument): disabling visual init here
is bad because it gets disabled even when we want
to use software GL, leading to Xephyr :1 -nodri
crashing in mesa.
We can now launch GL or XV apps in any of the
Xephyr screens we want.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window):
(hostx_create_window): make these functions be screen
number aware.
* hw/kdrive/ephyr/XF86dri.c : fix some compiler warnings.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIQueryDirectRenderingCapable),
(ephyrDRIOpenConnection),
(ephyrDRIAuthConnection),
(ephyrDRICloseConnection),
(ephyrDRIGetClientDriverName),
(ephyrDRICreateContext),
(ephyrDRIDestroyContext),
(ephyrDRICreateDrawable),
(ephyrDRIGetDrawableInfo),
(ephyrDRIGetDeviceInfo): in all those functions, don't forward
the screen number we receive - from the client - to the host X.
We (Xephyr) are always targetting the same X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrdriext.c:
(EphyrMirrorHostVisuals): make this duplicate the visuals of the host X
default screen into a given Xephyr screen. This way we have a chance
to update the visuals of all Xephyr screen to make them mirror those
of the host X.
(many other places): specify screen number where required by the api
change in hostx.h.
* hw/kdrive/ephyr/ephyrglxext.c: specify screen number where required
by the api change in hostx.h
* hw/kdrive/ephyr/ephyrhostglx.c: don't forward the screen number we
receive - from the client - to the host X.
We (Xephyr) are always targetting the same
X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrhostvideo.c,h: take in account the screen number received
from the client app. This is useful to know on which Xephyr screen we
need to display video stuff.
* hw/kdrive/ephyr/ephyrvideo.c: update this to reflect the API change
in hw/kdrive/ephyr/ephyrhostvideo.h.
(ephyrSetPortAttribute): when parameters are not valid
- they exceed their validity range - send them to the host anyway
and do not return an error to clients.
Some host expose buggy validity range, so rejecting client for that
is too harsh.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_has_xshape),
(hostx_has_glx),
(hostx_has_dri): added these new entry points
* hw/kdrive/ephyr/ephyrdriext.c:
(ephyrDRIExtensionInit):
check presence of DRI and XShape extensions before
trying to use them.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrHijackGLXExtension):
check presence of glx extension before we use it.
* hw/kdrive/src/Makefile.am: use fb/fbcmap_mi.c
and not fb/fbcmap.c. This allows kdrive to take advantage of
extensions redefining the entry points of micmap.c stuff.
For instance it allows Xephyr to have a working GL, which is not
possible otherwise, because GL redefines mInitVisualsProc
to initialise its visuals.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): force the back clipping rects
to equal the front clipping rects.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly overclip the clipping rects we
got from the client. This bug fixes a clipping rect that was too
small in height, basically. Also fix a possible mem corruption.
* hw/kdrive/ephyr/hostx.c:
(hostx_set_window_geometry): remove a useless XSync
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitialize): cleanup ephyrDRI extension init.
remove functions that belongs in ephyrdriext.c .
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRICreateDrawable): create the drawable on the host X peer
window, not on the host xephyr main window.
(ephyrDRIGetDrawableInfo): get drawable info of the host X peer
window.
* hw/kdrive/ephyr/ephyrdriext.c: make ephyr DRI extention wrap
a bunch of screen ops so that it can update the host X peer
window whenever DRI bound drawable are moved in Xephyr.
Also code the building blocks of the management of the
host X window peer.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_create_window): added this new entry point
(hostx_destroy_window): ditto
()hostx_set_window_geometry): ditto
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): quickly hook
this into getting the drawable info from the host
X server. For the time being, this only gets the drawable info
of the Xephyr main window in the host. It should really get
the info of a the peer drawable in the host X. So there should be a
peer drawable to begin with.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): some cleanups. Properly get the
the drawable info otherwise there is a host X hang.
* hw/kdrive/ephyr/ephyrhostglx.c: do not
(ephyrHostGLXQueryVersion): do not use C bindings of the glx protocol
calls. Some of those actually access DRI context directly, resulting
in the context having three clients. Instead all XF86DRI proto
fowarding request should be coded by hand and only forward the
protocol requests
* hw/kdrive/ephyr/ephyrglxext.c:
fixed various logging functions
(ephyrGLXGetStringReal): make sure all the string is sent to clients
including the ending zero.
* hw/kdrive/ephyr/ephyrhostglx.c:
(ephyrHostGLXGetStringFromServer): better error handling.
(ephyrHostGLXSendClientInfo): ditto.
(ephyrHostGLXMakeCurrent): ditto
* hw/kdrive/ephyr/ephyr.c:
(EphyrDuplicateVisual): when duplicating the
visual, copy the color component masks and the class
from the hostX
(EphyrMirrorHostVisuals): don't mix blue and green mask.
* hw/kdrive/ephyr/ephyrdri.c: add more logs.
(ephyrDRICreateDrawable): actually implement this.
for the moment it creates a DRI drawable for the hostX window,
no matter what drawable this call was issued for.
(ephyrDRIGetDrawableInfo): actually implemented this.
for the moment the drawable info queried for its attrs is the
Xephyr main main window.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly hook this dispatch
function to the ephyrDRIGetDrawableInfo() function.
* hw/kdrive/ephyr/ephyrglxext.c: add a bunch of GLX implementation hooks
here. Hijack some of the xserver GLX hooks with them. Still need to
properly support byteswapped clients though.
* hw/kdrive/ephyr/ephyrhostglx.c,h: actually implemented the protocol
level forwarding functions used by the GLX entr points in
ephyrglxext.c. Here as well, there are a bunch of them, but we are
far from having implemented all the GLX calls.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window_attributes): added this new entry point
(hostx_allocate_resource_id_peer): added this to keep track of
resource IDs peers: one member of the peer is in Xephyr, the other
is in host X.
(hostx_get_resource_id_peer): ditto.
* hw/kdrive/ephyr/ephyr.c: make Xephyr mirror
the visuals of the host X upon startup. This
is important for GLX client apps.
* hw/kdrive/ephyr/hostx.c,h: add a hostx_get_visuals_info()
to get the visuals of the host X.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrGLXGetFBConfigsSGIX): proxy the GLXGetFBConfigsSGIX call.
It is a vendor extension to get the visual configs as a list of
name/value pairs.
(ephyrHijackGLXExtension): hijack the VendorPriv_dispatch_info
dispatch table to register our implementation of GLXGetFBConfigsSGIX
(ephyrGLXGetFBConfigsSGIXReal): added this where the real
implementation of GLXGetFBConfigsSGIX is. It support bytes swapping.
(ephyrGLXGetFBConfigsSGIX,ephyrGLXGetFBConfigsSGIXSwap): these are
the dispatch entry points. They just call
ephyrGLXGetFBConfigsSGIXReal.
* hw/kdrive/ephyr/ephyrhostglx.c,h: reorganize the proxies to get
visual params from the host so that they clearly support the different
methods of doing so.
* hw/kdrive/ephyr/Makefile.am: add the proxy extension to
ephyr. The proxy extension is an experimental extension that
forwards protocol packets targeted at a given extension to the
host X.
* hw/kdrive/ephyr/ephyr.c: init proxy ext.
* hw/kdrive/ephyr/ephyrhostproxy.c,h: added this new file as part of the
proxy extension.
* hw/kdrive/ephyr/ephyrproxyext.c,h: ditto
* hw/kdrive/ephyr/hostx.c: add the hostx_get_get_extension_info() entry
point.
* hw/kdrive/ephyr/XF86dri.c: re format this correctly.
Make function decls honour the Ansi-C standard.
* hw/kdrive/ephyr/ephyr.c: protect glx/dri related
extension initialisation with the XEPHYR_DRI
macro. Initialize the GLX ext hijacking
at startup.
* hw/kdrive/ephyr/ephyrdri.c: add more logging to ease debugging
* hw/kdrive/ephyr/ephyrdriext.c: ditto. reformat.
* hw/kdrive/ephyr/ephyrglxext.c,h: add this extension to
proxy GLX requests to the host X. started to proxy those nedded to
make glxinfo work with fglrx. Not yet finished.
* hw/kdrive/ephyr/ephyrhostglx.c,h: put here the actual
Xlib code used to hit the host X server because Xlib stuff cannot be
mixed with xserver internal code, otherwise compilation erros due to
type clashes happen. So no Xlib type should be exported by the
entrypoints defined here.
* hw/kdrive/ephyr/ephyrhostvideo.c/h:
(ephyrHostXVStopVideo): add this entry point.
* hw/kdrive/ephyr/ephyrvideo.c:
Basically add ReputImage and StopVideo implementations.
Now, when other windows obscur the video window, the reclipping
seems to be well handled using StopVideo and ReputImage.
To do this, I was obliged to save the frame in PutImage, so
that I could resend it un ReputImage.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivQueryHostAdaptors): properly set
port private luke. This fixes a crash when
the host Xv supports multiple ports.
Make sure number of ports cannot be zero.
* configure.ac,include/dix-config.h.in: define the XEPHYR_DRI macro.
define it when --enable-xephyr and --enable-dri are both turned on.
* hw/kdrive/ephyr/XF86dri.c: copy this from mesa source to enable
Xephyr to talk DRI protocol the host X. In mesa, this is used by libGL.so to
talk DRI protocol with the server.
* hw/kdrive/ephyr/ephyr.c: finally initialise the DRI extension
in the ephyrInitScreen() function.
* hw/kdrive/ephyr/ephyrdri.c,ephyrdriext.c: safeguard the compilation
using the XEPHYR_DRI macro.
* hw/kdrive/ephyr/ephyrdriext.c: added this to implement a DRI extension
into Xephyr. Normally the DRI extension is only present in the
xfree86 server, but I have ported it to Xephyr. The extension calls
functions that declared/defined in ephyrdri.h ephyrdri.c that
forwards the DRI calls to the host X. It does not work yet, as this
entry is just to put the big bricks in place.
* hw/kdrive/ephyr/ephyrdri.c,h: declaration & definition of the
DRI client API that would hit the hostX server.
* hw/kdrive/ephyr/GL/internal/dri_interface.h: added this, otherwise
inclusion of /usr/include/X11/dri/xf86dri.h won't compile
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVPutImage): make this support clipping region.
The clipping region is propagated to host using XSetClipRectangles.
This changes the API of ephyrHostXVPutImage.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrPutImage): propagate the clipping region to the new
ephyrHostXVPutImage() entry point.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrInitVideo) make the EphyrXVPriv object be a
singleton instance, otherwise a new object is created at each
generation.
