The number of input devices is MAXDEVICES, not MAX_DEVICES (f781a752e6)
Two comments updated to refer to MAXDEVICES.
MAX_FUNCS in sigio.c was set to 16 if MAX_DEVICES was undefined. If more
than 15 physical input devices were present, this could result in a
failure to install the SIGIO handler for any device above 15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
inputstr includes XI2proto.h for the sole purpose of XI_LASTEVENT.
However, using XI_LASTEVENT in the server is prone to errors, if the server
is recompiled against a newer version of the protocol it would bump this
variable and associates bits, including potential ABI.
This patch defines an XI2LASTEVENT for use in the server and removes the
XI2proto.h require. XI2LASTEVENT is the current value of XI_LASTEVENT.
This patch is required by components that require access to inputInfo
(currently xf86-video-geode and xf86-video-cirrus) but should not have a
require for the XI2 protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These grabs are suported through two fake devices inputInfo.all_devices and
inputInfo.all_master_devices. These devices are not part of the device list
and are only initialised for their device id, nothing else.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This type is only used in XI to give a hint of what type this device may be.
Call it xinput_type for clarity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The masks were originally designed to generically handle event masks for
extensions. Since all that is in-server anyway, it's much better writing
custom event masks for those extensions that need it and not providing a
unified mechanism.
XI2 needs more than the current implementation, which is already too complex
for most other extensions. good riddance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
deviceGrab.sync.event is now an internal event, and CheckDeviceGrabs and
friends is changed over.
Note that this currently breaks some frozen grabs. See towards the end of
ComputeFreezes().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that we're only partially switched to internal events. The event in the
devices' event queue (dev->deviceGrab.sync.event) is still an XI event. The
events in syncEvents are InternalEvents only now.
This also implies fixing CheckVirtualMotion to work with internal events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This mirrors that in KeyClassRec: the state of the buttons as posted to
GetPointerEvents, rather than the state of the buttons as processed by
ProcessOtherEvent and friends.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of always keeping two copies of the keymap, only generate the
core keymap from the XKB keymap when we really need to, and use the XKB
keymap as the canonical keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have modmap (in the exact same format!) in XKB, so just use
that all the time, instead of duplicating the information.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since modifierKeyMap is generated from modifierMap, just remove it, and
only generate it when we need to send the modifier map to the client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes the following bug. Assuming your window manager grabs
Alt+Button1 to move windows, map Button3 to 0 via XSetPointerMapping,
then press the physical button 3 (this shouldn't have any effect), press
Alt and then button 1. The press event is delivered to the application
instead of firing the grab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
The device's button down state array was changed to use DOWN_LENGTH and thus
bitflags for each button in cfcb3da7.
Update the DBSN events to copy this bit-wise state.
Update xkb and Xi to check for the bit flag instead of the array value.
Reported by ajax.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The current code exposes to inconsistent updates, i.e. if handler N succeeds
but handler N+1 fails in setting the property, an error is returned to the
client although parts of the server now behave as if the property change
succeeded.
This patch adds a "checkonly" parameter to the SetProperty handler. The
handlers are then called twice, once with checkonly set to TRUE.
On the checkonly run, handlers _MUST_ return error codes if the property
cannot be applied. Handlers are not permitted to actually apply the changes.
On the second run, handlers are permitted to apply property changes.
Errors codes returned on the second run are ignored.
A property can only be deleted if any of the following is true:
- if a property is deletable and all handlers return Success.
- if a property is non-deleteable and the all handlers return Success AND the
delete request does not come from a client (i.e. driver or the server).
A client can never delete a non-deletable property.
We may need more than one handler to deal with a property (e.g. one in the
driver, one in the DIX), so get the handlers into a linked list and call them
one-by-one. This is of course slightly less entertaining than the hilarious
WRAP/UNWRAP game we play in other parts of the server.
XIRegisterPropertyHandler/XIUnregisterPropertyHandler are the interface
drivers/the DIX should use to attach themselves to the device.
XIDeleteAllDeviceProperties destroys everything, including the handlers.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Using id = 0 only worked pre-MPX since XInput didn't allow XOpenDevice for the
core devices (0 and 1). Now we can now legally register for events so we may
overwrite our device-independent classes with the ones selected for the VCP.
So, increase the EMASKSIZE to MAX_DEVICES + 1 and use MAX_DEVICES as the ID
when we don't have a device.
Mixing usage where some parts of the code treated this field as a bitmask
and other parts as an array of card8 was wrong, and as the wire protocol
wanted bitmasks, it was less invasive to switch the newer counting code use
booleans.
Master devices track slave buttons by waiting for all slave buttons to be
released before delivering the release event to the client.
This also removes the state merging code in DeepCopyDeviceClasses -- that
code was changing master device state without delivering any events,
violating protocol invariants. The result will be that existing slave
button state which does not match the master will not be visible through the
master device. Fixing this would require that we synthesize events in this
function, which seems like a bad idea. Note that keyboards have the same
issue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
device->button->down used to be a 32-byte bitmask with one bit for each
button. This has changed into a 256-byte array, with one byte assigned for
each button. Some of the callers were still using this array as a bitmask
however, this is fixed with this patch.
Thanks to Keith Packard for pointing this out. See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036202.html
Since we can't predict how many valuators may be in a future SD attached to an
MD, we need to preallocate a history buffer that is large enough to keep
MAX_VALUATORS coordinates per event.
In addition, the history buffer needs to memorize the coordinate ranges at the
time, thus requiring MDs to store (min_val, max_val, current_val, time)
instead of (current_val, time) for each motion history entry.
This commit only fixes the allocation.
With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
