defmin/defmax are screen coords and thus use a min-inclusive, max-exclusive
range. device axes ranges are inclusive, so bump the max up by one to get the
scaling right.
This fixes off-by-one coordinate errors if the coordinate matrix is used to
bind the device to a fraction of the screen. It introduces an off-by-one
scaling error in the device coordinate range, but since most devices have a
higher resolution than the screen (e.g. a Wacom I4 has 5080 dpi) the effect
of this should be limited.
This error manifests when we have numScreens > 1, as the scaling from
desktop size back to screen size drops one device unit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
commit 61a99aff9d
dix: pre-scale relative events from abs devices to desktop ratio (#31636)
added pre-scaling of relative coordinates coming from absolute devices to
undo uneven scaling based on the screen dimensions.
Devices have their own device width/height ratio as well (in a specific
resolution) and this must be applied for relative devices as well to avoid
scaling of the relative events into the device's ratio.
e.g. a Wacom Intuos4 6x9 is in 16:10 format with equal horiz/vert
resolution (dpi). A movement by 1000/1000 coordinates is a perfect diagonal
on the tablet and must be reflected as such on the screen.
However, we map the relative device-coordinate events to absolute screen
coordinates based on the axis ranges. This results in an effective scaling
of 1000/(1000 * 1.6) and thus an uneven x/y axis movement - the y
axis is always faster.
So we need to pre-scale not only by the desktop dimenstions but also by the
device width/height ratio _and_ the resolution ratio.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Too many callers relied on the refcnt being handled correctly. Use a simple
wrapper to handle that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ProcessTouchEvents() calls UDS for all touch events, but if the event type
was switched to TouchUpdate(pending end) UDS is a noop.
Daniel Drake found this can cause stuck buttons if a touch grab is
activated, rejected and the touch event is passed to a regular listener.
This sequence causes the TouchEnd to be changed to TouchUpdate(pending end).
The actual TouchEnd event is later generated by the server once it is passed
to the next listener. UDS is never called for this event, thus the button
remains logically down.
A previous patch suggested for UDS to handle TouchUpdate events [1], however
this would release the button when the first TouchEvent is processed, not
when the last grab has been released (as is the case for sync pointer
grabs). A client may thus have the grab on the device, receive a ButtonPress
but see the button logically up in an XQueryPointer request.
This patch adds a call to UDS to TouchEmitTouchEnd(). The device state must
be updated once a TouchEnd event was sent to the last grabbing listener and
the number of grabs on the touchpoint is 0.
[1] http://patchwork.freedesktop.org/patch/13464/
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The cursor is referenced during CopyGrab(), thus doesn't need to be handled
manually anymore. It does need to be refcounted for temp grabs though.
The oldGrab handling in ProcGrabPointer is a leftover from the cursor in the
grab being refcounted, but the grab itself being a static struct in the
DeviceIntRec. Now that all grabs are copied, this lead to a double-free of
the cursor (Reproduced in Thunderbird, dragging an email twice (or more
often) causes a crash).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A client may call XIGrabDevice twice, overwriting the existing grab. Thus,
make sure we free the old copy after we copied it. Free it last, to make
sure our refcounts don't run to 0 and inadvertantly free something on the
way.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
TouchListenerGone cleans up if a client disappears. Having this in
FreeGrab() triggers cyclic removal of grabs, emitting wrong events. In
particular, it would clean up a passive grab record while that grab is
active.
Move it to CloseDownClient() instead, cleaning up before we go.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Introduced in xorg-server-1.13.99.901-2-g9ad0fdb. Storing the grab pointer
in the listener turns out to be a bad idea. If the grab is not an active
grab or an implicit grab, the pointer stored is the one to the grab attached
on the window. This grab may be removed if the client calls UngrabButton or
similar while the touch is still active, leaving a dangling pointer.
To avoid this, copy the grab wherever we need to reference it later. This
is also what we do for pointer/keyboard grabs, where we copy the grab as
soon as it becomes active.
Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Obsolete since 4bc2761ad5. This struct
existed so copying a passive grab could be simply done by
activeGrab = *grab
and thus have a copy of the GrabPtr we'd get from various sources but still
be able to check device->grab for NULL.
Since 4bc2761 activeGrab is a pointer itself and points to the same memory
as grabinfo->grab, leaving us with the potential of dangling pointers if
either calls FreeGrab() and doesn't reset the other one.
There is no reader of activeGrab anyway, so simply removing it is
sufficient.
Note: field is merely renamed to keep the ABI. Should be removed in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Change the single if condition in the loop body to a
if (!foo) continue;
and re-indent the rest.
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A sync grab is the owner once it gets events. If it doesn't replay the
event it will get all events from this touch, equivalent to accepting it.
If the touch has ended before XAllowEvents() is called, we also now need to
send the TouchEnd event and clean-up since we won't see anything more from
this touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device is frozen in results to a grab, we need to enqueue the events.
This makes things complicated, and hard to follow since touch events are now
replayed in the history, pushed into EnqueueEvent, then replayed later
during PlayReleasedEvents in response to an XAllowEvents.
While the device is frozen, no touch events are processed, so if there is a
touch client with ownership mask _below_ the grab this will delay the
delivery and potentially screw gesture recognition. However, this is the
behaviour we have already anyway if the top-most client is a sync pgrab or
there is a sync grab active on the device when the TouchBegin was generated.
(also note, such a client would only reliably work in case of ReplayPointer
anyway)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device is currently grabbed as the result of a passive grab
activating, do not prepend that grab to the listeners (unlike active grabs).
Otherwise, a client with a passive pointer grab will prevent touch grabs
from activating higher up in the window stack.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If drivers supply incorrect values don't just quietly return False, spew to
the log so we can detect what's going on. All these cases are driver bugs
and should be fixed immediately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
InitPointerClassDeviceStruct/InitKeyboardDeviceStruct allocate a
proximity/focus class, respectively. If a driver calls
InitFocusClassDeviceStruct or InitProximityClassDeviceStruct beforehand,
the previously allocated class is overwritten, leaking the memory.
Neither takes a parameter other than the device, so we can simply skip
initialising it if we already have one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
==21860== 24 bytes in 1 blocks are still reachable in loss record 85 of 397
==21860== at 0x4C2B3F8: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==21860== by 0x61ED93: AllocateOutputBuffer (io.c:1037)
==21860== by 0x61E15A: WriteToClient (io.c:764)
==21860== by 0x457B30: ProcQueryExtension (extension.c:275)
==21860== by 0x43596B: Dispatch (dispatch.c:432)
==21860== by 0x425DAB: main (main.c:295)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
DeleteCallbackManager() introduced for better symmetry in the caller, they
do the same thing.
==20085== 24 bytes in 1 blocks are still reachable in loss record 11 of 103
==20085== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==20085== by 0x43A097: CreateCallbackList (dixutils.c:837)
==20085== by 0x43A1D3: AddCallback (dixutils.c:869)
==20085== by 0x4B1736: GEExtensionInit (geext.c:209)
==20085== by 0x41C8A8: InitExtensions (miinitext.c:389)
==20085== by 0x5AC918: main (main.c:208)
==2042== 8 bytes in 1 blocks are still reachable in loss record 2 of 97
==2042== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2042== by 0x4C2A657: realloc (vg_replace_malloc.c:525)
==2042== by 0x4802F5: XNFrealloc (utils.c:1095)
==2042== by 0x43A17A: CreateCallbackList (dixutils.c:855)
==2042== by 0x43A1EF: AddCallback (dixutils.c:870)
==2042== by 0x4B1752: GEExtensionInit (geext.c:209)
==2042== by 0x41C8A8: InitExtensions (miinitext.c:389)
==2042== by 0x5AC9E4: main (main.c:208)
==2042==
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Heaps of these:
==2042== 15,360 bytes in 120 blocks are still reachable in loss record 94 of
97
==2042== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2042== by 0x4C2A657: realloc (vg_replace_malloc.c:525)
==2042== by 0x45FB91: double_size (registry.c:65)
==2042== by 0x45FC97: RegisterRequestName (registry.c:85)
==2042== by 0x460095: RegisterExtensionNames (registry.c:179)
==2042== by 0x460729: dixResetRegistry (registry.c:334)
==2042== by 0x5AC992: main (main.c:201)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
==2547== 1 bytes in 1 blocks are still reachable in loss record 1 of 111
==2547== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2547== by 0x64D1551: strdup (strdup.c:43)
==2547== by 0x4802FB: Xstrdup (utils.c:1113)
==2547== by 0x585B6C: XkbSetRulesUsed (xkbInit.c:219)
==2547== by 0x58700F: InitKeyboardDeviceStruct (xkbInit.c:595)
==2547== by 0x419FA3: vfbKeybdProc (InitInput.c:74)
==2547== by 0x425A3D: ActivateDevice (devices.c:540)
==2547== by 0x425F65: InitAndStartDevices (devices.c:713)
==2547== by 0x5ACA57: main (main.c:259)
and a few more of the above.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
I didn't think we needed this before, but after doing some more
work with reverse optimus it seems like it should be called.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
this allows the pixmap dirty helper to be used for reverse optimus,
where the GPU wants to copy from the shared pixmap to its VRAM copy.
[airlied: slave_dst is wrong name now but pointless ABI churn at this point]
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We should have no problem allowing output/offload from the same slave,
I asserted here, but in order to implement reverse optimus this makes
perfect sense. (reverse optimus is intel outputting to nvidia).
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
==15562== 1,800 bytes in 1 blocks are definitely lost in loss record 298 of 330
==15562== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==15562== by 0x4312C7: InitTouchClassDeviceStruct (devices.c:1644)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Slave devices don't need these and the matching code in CloseDevice() has a
IsMaster() condition on freeing these, causing a leak.
==16111== 384 bytes in 4 blocks are definitely lost in loss record 72 of 105
==16111== at 0x4C28BB4: calloc (vg_replace_malloc.c:467)
==16111== by 0x42AEE2: AllocDevicePair (devices.c:2707)
==16111== by 0x4BAA27: AllocXTestDevice (xtest.c:617)
==16111== by 0x4BA89A: InitXTestDevices (xtest.c:570)
==16111== by 0x425F5E: InitCoreDevices (devices.c:690)
==16111== by 0x5ACB2D: main (main.c:257)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Fixes reading random memory read beyond the end of original event.
sizeof device_event: 424
sizeof internal_event: 2800
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Unlike pointer/keyboard events, the flags field for ET_Touch* is a set of
server-internal defines that we need to convert to XI protocol defines.
Currently only two of those defines actually translate to the protocol, so
make sure we don't send internal garbage down the wire.
No effect to current clients since they shouldn't look at undefined bits
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
e02f864fdf "Suppress cursor display until the first XDefineCursor() request"
disabled cursor display a priori unless -retro is given.
On a plain server, caling XFixesHideCursor() and XFixesShowCursor() would
show the default root cursor, despite no client actually defining a cursor.
Change the logic, disable CursorVisible by default and only enable it from
the window's CWCursor logic. If no window ever defines a cursor, said cursor
stays invisible.
X.Org Bug 58398 <http://bugs.freedesktop.org/show_bug.cgi?id=58398>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
==5712== 6 bytes in 1 blocks are still reachable in loss record 17 of 585
==5712== at 0x4A074CD: malloc (vg_replace_malloc.c:236)
==5712== by 0x3D1DE885B1: strndup (strndup.c:46)
==5712== by 0x41CB71: MakeAtom (atom.c:121)
==5712== by 0x55AE3E: XIGetKnownProperty (xiproperty.c:401)
==5712== by 0x4251C9: AddInputDevice (devices.c:312)
==5712== by 0x42AC0C: AllocDevicePair (devices.c:2657)
==5712== by 0x425E6E: InitCoreDevices (devices.c:677)
==5712== by 0x5ACA05: main (main.c:257)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The transformation matrix we previously stored was a scaled matrix based on
the axis ranges of the device. For relative movements, the scaling is not
required (or desired).
Store two separate matrices, one as requested by the client, one as the
product of [scale . matrix . inv_scale]. Depending on the type of movement,
apply the respective matrix.
For relative movements, also drop the translation component since it doesn't
really make sense to use that bit.
Input ABI 19
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Set on DeviceEnterLeaveEvent() the xXIEnterEvent->focus field
similarly to how the CoreEnterLeaveEvent() function above does
for core events.
This fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=677329
reported to GTK+, where focus handling on window managers with
sloppy focus or no window manager present was broken due to this
field being always set to FALSE.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XTest devices are the first ones in the list, being initialised together
with the master devices. If we disable the devices in-order and a device has
a button down when being disabled, the XTest device is checked for a
required button release (xkbAccessX.c's ProcessPointerEvent). This fails if
the device is already NULL.
Instead of putting the check there, disable the devices in the reverse order
they are initialised. Disable physical slaves first, then xtest devices,
then the master devices.
Testcase: shut down server with a button still held down on a physical
device
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Absolute devices may send relative events depending on the mode (synaptics
by default, wacom per option). The relative events are added to the previous
position, converted into device coordinates and then scaled into desktop
coordinates for pointer movement.
Because the device range must be mapped into the desktop coordinate range,
this results in uneven scaling depending dimensions, e.g. on a setup with
width == 2 * height, a relative movement of 10/10 in device coordinates
results in a cursor movement of 20/10 (+ acceleration)
Other commonly user-visible results:
* the touchpad changing acceleration once an external monitor as added.
* drawing a circle on a wacom tablet in relative mode gives an ellipsis in
the same ratio as the desktop dimensions.
Solution: pre-scale the incoming relative x/y coordinates by width/height
ratio of the total desktop size. Then add them to the previous
coordinates and scale back with the previous mapping, which will undo the
pre-scaling and give us the right movement.
X.Org Bug 31636 <http://bugs.freedesktop.org/show_bug.cgi?id=31636>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If we're already using our own custom macro, might as well use it properly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This is mostly sigsafe code, so use sigsave printf. And update some fields
to double that used to be int.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
For absolute events, if the client specifies a screen number offset the
coordinates by that. And add a new flag so we know when _not_ to add the
screen offset in GPE.
Without this offset and the flag, GPE would simply add the offset of the
current screen if POINTER_SCREEN is set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Scaled is already in desktop coordinates, take the total width into account,
not just the current screen's width.
Fixes Xdmx pointer position calculation.
X.Org Bug 51904 <http://bugs.freedesktop.org/show_bug.cgi?id=51904>
Signed-off-by: Sybren van Elderen <sowmestno@msn.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetTouchEvents is usually called in a signal context.
Calling ErrorF for the error messages leads to X complaining about log:
(EE) BUG: triggered 'if (inSignalContext)'
(EE) BUG: log.c:484 in LogVMessageVerb()
(EE) Warning: attempting to log data in a signal unsafe manner while in signal context.
Please update to check inSignalContext and/or use LogMessageVerbSigSafe() or ErrorFSigSafe().
The offending log format message is:
%s: Attempted to start touch without x/y (driver bug)
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a XI2.1+ client has a grab on a non-root window, it must still receive
raw events on the root window.
Test case: register for XI_ButtonPress on window and XI_RawMotion on root.
No raw events are received once the press activates an implicit grab on the
window.
X.Org Bug 53897 <http://bugs.freedesktop.org/show_bug.cgi?id=53897>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Should've been removed in bc1f90a615018c05994fae3e678dd2341256cd82a, but got
left here due to a botched rebase.
Fixes stray button events sent to clients after deactivating an async
pointer grab on a pointer-emulating-touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
events.c: In function 'DeactivatePointerGrab':
events.c:1524:51: warning: 'dev' may be used uninitialized in this function
[-Wuninitialized
dev is unset when we get here, the device to check is "mouse".
Introduced in ece8157a59.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Instead of guessing what resource type the listener is and what property to
retrieve, store the resource type in the listener directly.
Breaks XIT test cases:
TouchGrabTestMultipleTaps.PassiveGrabPointerEmulationMultipleTouchesFastSuccession
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=56557
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
This places a pointer to the grab related to a TouchListener directly
in the TouchListener structure rather than hoping to find the grab
later on using the resource ID.
Passive grabs have resource ID in the resource DB so they can be
removed when a client exits, and those resource IDs get copied when
activated, but implicit grabs are constructed on-the-fly and have no
resource DB entry.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Conflicts:
Xi/xichangehierarchy.c
Small conflict with the patch from
Xi: don't use devices after removing them
Was easily resolved by hand.
Signed-off-by: Keith Packard <keithp@keithp.com>
GrabMask is a union of core, XI1 and XI2 masks. If a XI2 grab is activated,
the value is a random pointer value, using it as mask has unpredictable
effects.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If a client has a core grab, don't allow re-grabbing with type XI2, etc.
This was the intent of the original commit
xorg-server-1.5.99.1-782-g09f9a86, but ineffective.
X.Org Bug 58255 <http://bugs.freedesktop.org/show_bug.cgi?id=58255>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Only deliver to the client that created the barrier, not to other clients.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Instead of having the pointer barrier code enqueue events separately from
GetPointerEvents, pass the event list through and let it add to it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This adds support for clients that would like to get a notification
every time a barrier is hit, and allows clients to temporarily release
a barrier so that pointers can go through them, without having to
destroy and recreate barriers.
Based on work by Chris Halse Rogers <chris.halse.rogers@canonical.com>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For touch selection conflicts, we need to check not only if the mask is set
for the device, but if it is set for only that specific device (regardless
of XIAll*Devices)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A client with a pointer grab on a touch device must reject the touch when
detactivating the grab while the touch is active. However, such a rejecting
must not trigger a ButtonRelease event to be emulated and sent to the
client.
Set the grabbing listener's state to HAS_END, so we simply skip delivery to
that client.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
An active grab ungrabbing is the same as rejecting the grab, since the
client is no longer interested in those events. So reject any touch grab,
but do so before actually deactivating since we're interested in the
TouchEnd for the current grabbing client.
A passive grab otoh is _not_ like rejecting a grab, since it deactivates
automatically when the touch ends.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
TouchListenerAcceptReject may be called during normal event processing, but
ProcessInputEvents is not reentrant and calling it here smashes the event
queue.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The formatter confused address operators preceded by casts with
bitwise-and expressions, placing spaces on either side of both.
That syntax isn't used by ordinary address operators, however,
so fix them for consistency.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When the screen saver is forcibly deactivated, the idle time counter is
reset for all devices but not for the fake XIAllDevices and
XIAllMasterDevices. XScreenSaverQueryInfo uses XIAlldevices to fill the
"idle" field, thus returning the wrong value.
Regression introduced in
commit 6aef209ebc
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Mon Mar 12 13:51:02 2012 +1000
Change lastDeviceIdleTime to be per-device
X.Org Bug 56649 <http://bugs.freedesktop.org/show_bug.cgi?id=56649>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Giacomo Perale <ghepeu@virgilio.it>
Reviewed-by: Keith Packard <keithp@keithp.com>
setitimer() and SIGALRM aren't available on WIN32, so smart scheduler
code cannot be built. Provide only stubs for smart scheduler timer
code, and disable smart scheduler by default.
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
DDXTouchPointInfoRec.valuators used to store axis values after transform.
This resulted in Coordinate Transformation Matrix
being applied multiple times to the last coordinates,
in the case when only pressure changes in the last touch event.
Changed DDXTouchPointInfoRec.valuators to store values before transform.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=49347
Signed-off-by: Yuly Novikov <ynovikov@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With only one callee left, we are free to assume that
!(flags & TOUCH_CLIENT_ID)
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
As before GetTouchEvents causes unwanted side effects. Add a new
function GetDixTouchEnd, which generates a touch event from the touch
point. We fill in the event's screen coordinates from the MD's current
sprite position.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetTouchEvents has plenty of side effects such as moving the pointer or
updating the master device, which we don't want to happen when
replaying. The only reason for calling it was to generate a DCCE event,
but GetTouchEvents doesn't even do that right (we might need a DCCE
event even when replaying a master event, or clients could interpret
valuator data incorrectly).
This discussion is moot at the moment anyway, since DeliverTouchEvents
doesn't appear to deliver DCCE events.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
[Added call to processInputProc instead of direct call to DeliverTouchEvents]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The function is identical to init_device_event from inpututils.c with
the first two arguments swapped.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The double_to_f1616() functions do the same thing, and they're tested.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Disabling a XTest device followed by an XTest API call crashes the server.
This could be fixed elsewhere but disabled devices must not send events
anyway. The use-case for disabled XTest devices is somewhat limited, so
simply disallow disabling the devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
dispatch.c: In function 'ProcCopyArea':
dispatch.c:1608:5: warning: declaration of 'rc' shadows a previous local
dispatch.c:1604:9: warning: shadowed declaration is here
dispatch.c: In function 'ProcCopyPlane':
dispatch.c:1647:5: warning: declaration of 'rc' shadows a previous local
dispatch.c:1643:9: warning: shadowed declaration is here
events.c: In function 'GetClientsForDelivery':
events.c:2030:68: warning: declaration of 'clients' shadows a global declaration
../include/dix.h:124:28: warning: shadowed declaration is here
events.c: In function 'DeliverEventToWindowMask':
events.c:2113:19: warning: declaration of 'clients' shadows a global declaration
../include/dix.h:124:28: warning: shadowed declaration is here
events.c: In function 'EventSuppressForWindow':
events.c:4420:12: warning: declaration of 'free' shadows a global declaration
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
These functions are already declared in <X11/fonts/fontproto.h>.
Redeclaring them just for _X_EXPORT causes tons of warnings throughout
xserver, but they need to be declared somewhere to be picked up by
sdksyms.sh. Doing so in a private header limits the warnings to
sdksyms.c; fixing those as well would require changes to fontsproto.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The allocated TouchListener array may fall short by 1 if hitting the worst case
situation where there's an active grab, passive grabs on each window in the
sprite trace and event selection for touch in one of the windows. This may lead
to memory corruptions as the array is overflown.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
POINTER_SCREEN coordinates are screen-relative. For a Zaphod setup, the
coordinates after a screen crossing are already relative to the new screen's
origin. Add that offset to the coordinates before re-setting.
regression introduced by
commit bafbd99080
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Wed Aug 8 11:34:32 2012 +1000
dix: work around scaling issues during WarpPointer (#53037)
X.Org Bug 54654 <http://bugs.freedesktop.org/show_bug.cgi?id=54654>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
UngrabAllDevices(Bool kill_client):
If we are not going to kill the client (kill_clients false),
we need to deactivate grabs of active clients, too.
(If we are going to kill the client,
no need to deactivate the grab,
as this will be done as part of the client kill.)
Fixes: X.Org Bug 55785 <http://bugs.freedesktop.org/show_bug.cgi?id=55785>
Signed-off-by: Lionel Elie Mamane <lionel@mamane.lu>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Otherwise:
* We can't end the touches while device is disabled
* New touches after enabling the device may erroneously be mapped to old
logical touches
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A disabled device doesn't have a sprite (less so a sprite->win) and triggers
a NULL-pointer dereference on shutdown when all active grabs are released as
part of the cleanup.
Fix this by checking for sprite being non-null and setting the focus window
to the NullWindow if it is. The rest of the patch just attempts to make
things more readable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If the device is disabled, the sprite window is NULL and dereferencing
crashes the server.
This is only triggered for XI 1.x grabs (ProcXGrabDevice) as XI2 grabs would
trigger another code path, creating a sprite for the disabled device as if
detaching it (which is wrong and fixed with this patch too).
Grabbing a disabled device doesn't make sense as it won't send events
anyway. However, the protocol specs do not prohibit it, so we need to keep
it working.
Luckily, oldWin is only used for focus out events, which aren't necessary
given that the device is disabled.
X.Org Bug 54934 <http://bugs.freedesktop.org/show_bug.cgi?id=54934>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
Scale_to_desktop() converts ABS events from device coordinates
to screen coordinates:
[dev_X_min, dev_X_max] -> [screen_X_min, screen_X_max]
[dev_Y_min, dev_Y_max] -> [screen_Y_min, screen_Y_max]
An edge ABS event with X = dev_X_max (e.g., generated from the
edge of a touchscreen) will be converted to have screen X value
= screen_X_max, which, however, will be filterd out when xserver
tries to find proper Window to receive the event, because the
range check for a Window to receive events is
window_X_min <= event_screen_X < window_X_max
Events with event_screen_X = screen_X_max will fail the test get
and rejected by the Window.
To fix this, we change the device to screen coordinates mapping to
[dev_X_min, dev_X_max] -> [screen_X_min, screen_X_max-1]
[dev_Y_min, dev_Y_max] -> [screen_Y_min, screen_Y_max-1]
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This hack was added to suppress events generated by Composite's internal
unmap/map cycle on redirection state change. Since that cycle was
removed in 193ecc8b4, these can go.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
The property handler is registered after setting the property, so
dev->transform remains as all-zeros. That causes pixman_f_transform_invert()
to fail (in transformAbsolute()) and invert remains as garbage. This
may then cause a cursor jump to 0,0.
Since the axes are not yet initialized here and we need to allow for drivers
changing the matrix, we cannot use the property handler for matrix
initialization, essentially duplicating the code.
Triggered by the fix to (#49347) in 749a593e49https://bugzilla.redhat.com/show_bug.cgi?id=852841
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Forwarding proxies like sshd will appear to be local, even though they
aren't really. This leads to weird behaviour for extensions that truly
require running under the same OS services as the client, like MIT-SHM
and DRI2.
Add two new legal values for the initial connection's byteOrder field,
'r' and 'R'. These act like 'l' and 'B' respectively, but have the side
effect of forcing the client to be treated as non-local. Forwarding
proxies should attempt to munge the first packet of the connection
accordingly; older servers will reject connections thusly munged, so the
proxy should fall back to passthrough if the munged connection attempt
fails.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If we don't free this here, it gets freed later in the resource
cleanups, however it then looks up up pmap->pScreen, which we
freed already in this function. So free the default colormap
when we should.
This fixes a bug after a couple of hotplug cycles when you try
to exit the X server and it crashes.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In WarpPointer calls, we get input in screen coordinates. They must be
scaled to device coordinates, and then back to screen coordinates for screen
crossing and root coordinates in events.
The rounding errors introduced (and clipping in core/XI 1.x events) can lead
to the actual position being different to the requested input coordinates.
e.g. 200 scales to 199.9999, truncated to 199 in the event.
Avoid this by simply overwriting the scaled screen coordinates with the
input coordinates for the POINTER_SCREEN case.
X.Org Bug 53037 <http://bugs.freedesktop.org/show_bug.cgi?id=53037>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This should make cleaning up the GPU screens easier as the core
screens they are associated with will still be around.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
If a device has smooth scrolling axes, but submits scroll button events, we
convert those to motion events and update the valuators. For legacy button
events, the valuator mask is likely unset though, causing
add_to_scroll_valuator() to return early, leaving us with an empty mask.
That again skipped the rest of the code and no events were generated.
Fix it by making sure that the scroll valuator in the mask is at least
initialized to 0.
Broke evdev wheel emulation, introduced by
54476b5e44.
X.Org Bug 52508 <http://bugs.freedesktop.org/show_bug.cgi?id=52508>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Since the free routines free the master pixmap then the slave, we should
be taking a reference when we bind them together.
Fixes a use-after-free when resizing a primed gears.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The indenter seems to have gotten confused by initializing arrays of
structs with the struct defined inline - for predefined structs it did
a better job, so match that.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Since we call directly into XKB and may be doing so before the extension
has been initialised, make sure its privates are set up first. XTest
had a hack to do this itself, but seems cleaner to just make sure we do
it in AllocDevicePair.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In:
commit d792ac125a
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Mon Jul 9 19:12:43 2012 -0700
Use C99 designated initializers in dix Replies
the initializer for the .length element of the xGetPointerMappingReply
structure uses the value of rep.nElts, but that won't be set until
after this initializer runs, so we get garbage in the length element
and clients using it will generally wedge.
Easy to verify:
$ xmodmap -pp
Fixed by creating a local nElts variable and using that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Adds new function padding_for_int32() and uses existing pad_to_int32()
depending on required results.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Let the compiler worry about 0-filling the rest of the fields,
instead of memsetting the whole struct and then going back to
overwrite some of the fields.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
When passing variable pointers to functions or otherwise doing long
sequences to compute values for replies, create & use some new
temporary variables, to allow for simpler initialization of reply
structures in the following patches.
Move memsets & other initializations to group with the rest of the
filling in of the reply structure, now that they're not needed so
early in the code path.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Always initialize to zero, and then if permission is granted, copy
the current key state maps, instead of always copying and then
zeroing out if permission was denied.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Always initialize to zero, and then if permission is granted, copy
the current key state maps. Use memcpy instead of memmove for the
copy, since we're always copying to a newly allocated event on the
stack, so guaranteed not to overlap with the device map structure.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Don't need to pass an empty reply to NullPropertyReply, let it make
it's own. Move reply initialization code in remaining replies in
ProcGetProperty to group with the rest of the fields. (Prepares
for coming C99 designated initializer conversion.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
When allocating new global privates, make sure the gpu
screens get their private offsets updated.
This only affects GPU screens that enumerate before the non-GPU
screens, which generally requires that the related device be present
when the system boots so that it can get an earlier DRM filename.
Signed-off-by: Keith Packard <keithp@keithp.com>
add the linked list and provider hooks.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds two functions for drivers to use directly to keep a
linked list of slave pixmaps to do damage tracking on and keep
updated. It also adds a helper function that drivers may optionally
call to do a simple copy area damage update.
v2: use damage.h not damagestr.h, fixes ephyr build.
v3: address ajax review: use slave_dst, drop unused dst member.
v4: check DamageCreate return, add SourceValidate comment,
add a comment addressing possible optimisation possibility
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When randr notices a crtc configuration request for a slave device,
it checks if the slave allocated pixmap exists and is suitable,
if not it allocates a new shared pixmap from the master, shares
it to the slave, and starts the master tracking damage to it,
to keep it updated from the current front pixmap.
If the resize means the crtc is no longer used it will destroy
the slave pixmap.
This adds the concept of a scanout_pixmap to the randr_crtc object,
and also adds a master pixmap pointer to the pixmap object, along
with defining some pixmap helper functions for getting pixmap box/regions.
v2: split out pixmap sharing to a separate function.
v3: update for void *
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just add the interfaces to attach/detach output slaves, and
a linked list to keep track of them. Hook up the randr providers
list to include these slaves.
v1.1: add another assert to the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This list is meant for attaching unbound gpu screens to initially,
before the client side rebinds them.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch introduces gpu screens into screenInfo. It adds interfaces
for adding and removing gpu screens, along with adding private fixup,
block handler support, and scratch pixmap init.
GPU screens have a myNum that is offset by GPU_SCREEN_OFFSET (256),
this is used for logging etc.
RemoveGPUScreen isn't used until "xfree86: add platform bus hotplug support".
v2: no glyph pictures for GPU screens for now.
v3: introduce MAXGPUSCREENS, fix return value check
v4: fixup myNum when renumbering screens (ajax)
v5: drop cursor privates for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a precursor for reusing this code to init gpu screens.
v2: fixup int check as per Keith's review.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This will permit midispcur to allocate its privates for hotplug outputs
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Screen-specific privates areas are only allocated for objects related
to the target screen; objects allocated for other screens will not
have the private space reserved. This saves memory in these objects
while also allowing hot-plug screens to have additional private
allocation space beyond what the core screens are using.
Drivers are encouraged to switch to this mechanism as it will reduce
memory usage in multi-GPU environments, but it is only required for
drivers which will be loaded after the server starts, like
modesetting.
Objects providing screen-specific privates *must* be managed by the
screen-specific private API when allocating or initializing privates
so that the per-screen area can be initialized properly.
The objects which support screen-specific privates are:
Windows
Pixmaps
GCs
Pictures
Extending this list to include Colormaps would be possible, but
require slightly more work as the default colormap is created before
all colormap privates are allocated during server startup, and hence
gets a bunch of special treatment.
Of particular note, glyphs are *not* capable of supporting
screen-specific privates as they are global objects, not allocated on
a screen-specific basis, and so each driver must be able to see their
privates within the glyph.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Don't leak if ti->history is NULL.
Found by coverity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This merge includes a minor fixup for '%p' arguments; must cast to
uintptr_t instead of uint64_t as we use -Werror=pointer-to-int-cast
which complains when doing a cast (even explicitly) from a pointer
to an integer of different size.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No other Xfont consumer used it, and this saves us from having to link
callers against libXfont for one simple function when doing
-no-undefined symbols builds.
The function is given a new name to avoid clashing with existing libXfont
binaries, but a #define is provided to preserve the API so we don't have
to fix all the callers at the same time.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This code existed in 3 different forms, perhaps it should be
consolidated.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
