When we're using server managed-fds through systemd-logind, systemd-logind
*must* keep running while we are using it, as it does things like drmSetMaster
and drmDropMaster for us on vt-switch.
On a systemd-logind restart, we cannot simply re-connect since we will then
get a different fd for the /dev/dri/card# node, and we've tied a lot of
state to the old fd. I've discussed this with the systemd people, and in the
future there may be a restart mechanism were systemd-logind passed fds from
the old logind to the new logind. But for now there answer is simply:
"Don't restart systemd-logind", and there never really is a good reason to
restart it.
So to ensure unpleasentness if people do decide to restart systemd-logind
anyways (or when it crashes), monitor logind going away and make this a fatal
error. This avoids getting a hard-hung machine on the next vt-switch and will
hopefully quickly educate users to not restart systemd-logind while they have
an X session using it active.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
InputDevices may share a single device-node, this happens ie with Wacom
tablets.
This patch makes take_fd and release_fd properly deal with this, together
with the earlier patch for updating the fd in all matching xf86InputDevs
on pause / resume this completes support for such shared device-nodes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
And use it where appropriate.
Setting the fd for all matching InputDevices is necessary when we've
multiple InputDevices sharing a single device-node, such as happens with
Wacom tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a preparation patch for adding support for server managed fds
for InputDevices where multiple input devices share the same device node (and
thus also their major and minor).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Modify systemd_logind_find_info_ptr_by_devnum to take a start argument, so
that it can be used to find all occurences of a devnum in an InputInfo list,
rather then just the first.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that there are more callers but those were already not doing any
error checking.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If there is only a single non kms video device (tested with the vesa driver),
then we will never get a resume signal for a drm node, so also call vtenter
when we get a resume for an input device.
Notes:
1) vtenter checks if it is ok to do the vtenter, so if there are kms video
devices the calls for input device resumes are a nop
2) This assumes that there will always be at least one server event fd
supporting input device. Since all non legacy input-drivers will be patched
to supported server fds this seems a safe assumption.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Try to get a server managed fd from the Options before trying to open the
device node ourselves.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind we cannot probe input devices while switched away, so
if we're switched away, put the pInfo on a list, and probe everything on
that list on VT-Enter.
This is using an array grown by re-alloc, rather than a xorg_list since
creating a new data-type to store a pInfo + list-entry just for this seems
overkill.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits makes the changes necessary outside of the systemd-logind core
to make the server use systemd-logind managed fds for input devices and drm
nodes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits add the bulk of the systemd-logind integration code, but does
not hook it up yet other then calling its init and fini functions, which
don't do that much.
Note the configure bits check for udev since systemd-logind use will only be
supported in combination with udev. Besides that it only checks for dbus
since all communication with systemd-logind is happening over dbus, so
no further libs are needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The OdevAttributes struct should just be a head of the attributes list, and
not contain various unrelated flags. Instead add a flags field to
struct xf86_platform_device and use that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Add a config_odev_get_attribute helper, and replace the diy looping over all
the attributes done in various places with calls to this helper.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Detaching from our controlling tty makes little sense when it is the same
as the vt we're asked to run on. So automatically assume -keeptty in this case.
This is useful to do because when not running as root the server can only make
various VT related ioctls when it does not detach from the tty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
There is no reason why keeptty cannot be used without root-rights.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
asm/mtrr.h makes this an unsigned long on 32, but a u64 on 64. Cast
it to a long to win.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
These are generated in code which uses sprintf as a convenient way to
construct strings from various pieces.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Having this function be static generates a compiler warning.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This gets the easy warnings, mostly constant string problems.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
newer automake gets quite noisy about this.
hw/xfree86/ddc/Makefile.am:7: warning:
'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
and many more of these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
* __FreeBSD_kernel_version doesn't exist anymore
* The removed check was for FreeBSD versions from before September 2000
which are no longer supported anyway
* Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66045
Signed-off-by: François Tigeot <ftigeot@wolfpond.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
So when we VT switch back and attempt to flush the input devices,
we don't succeed because evdev won't return part of an event,
since we were only asking for 4 bytes, we'd only get -EINVAL back.
This could later cause events to be flushed that we shouldn't have
gotten.
This is a fix for CVE-2013-1940.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Revert 70739e817b and mostly revert
c31eac647a.
Further investigation shows the encountered race condition is between
lightdm and plymouth-splash, as implemented in the Ubuntu distribution
within the limitations of upstart's job coordination logic, and can (and
should) be fixed within those limiations. Not in xserver itself.
This leaves some of the diagnostic improvements from the recent patch
series, in case others run into a similar situation.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This path is technically executed through config/udev, but having two
messages in the form "config/udev: Adding drm device" makes it appear as if
the udev filters are wrong and it's trying to add the same device twice. In
fact, it's only one device, only added once, but a duplicate log message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We don't want to hotplug output devices while we are VT switched,
as we get races between multiple X servers on the device open, and
drm device master status. This just queues device opens until we return
from VT switch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This replaces some previous uses of direct xf86Screens[0] accesses.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
If other processes have had drm open previously, xserver may attempt to
open the device too early and fail, with xserver error exit "Cannot
run in framebuffer mode" or Xorg.0.log messages about "setversion 1.4
failed".
In this situation, we're receiving back -EACCES from libdrm. To address
this we need to re-set ourselves as the drm master, and keep trying to
set the interface until it works (or until we give up).
See https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/982889
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
And if we've had to delay booting due to not being able to set the
interface, fess up.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
If acpid sends a string in a format that we can't parse, bail out instead of
potentially dereferencing a NULL-pointer.
X.Org Bug 73227 <http://bugs.freedesktop.org/show_bug.cgi?id=73227>
Signed-off-by: Ted Felix <ted@tedfelix.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
K_OFF is a slightly broken interface, since if some other process
(cough, systemd) sets the console state to K_UNICODE then it undoes
K_OFF, and now Alt-F2 will switch terminals instead of summoning the
Gnome "run command" dialog.
KDSKBMUTE separates the "don't enqueue events" logic from the keymap, so
doesn't have this problem. Try it first, then continue falling back to
older methods.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=859485
Tested-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We load the driver list, then enable I/O, then call driver probe based
on whether I/O enable succeeded. That's bad, because the loaded
security policy might forbid port access. We happen to treat that as
fatal for some reason, which means even drivers that don't need I/O
access (like kms and fbdev) don't get the chance to run. Facepalm.
How about we just make that non-fatal instead, that sounds like a much
better plan.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Pull platform methods into their own sections for legibility, and
rewrite the ifdefs to be more concise.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The indenter seems to have gotten confused by initializing arrays of
structs with the struct defined inline - for predefined structs it did
a better job, so match that.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
No drivers used this, so it got unexported, and now it's so unused it
got culled during the link. Take the poor function out behind the shed
and put it out of its misery.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides add/remove support for platform devices at xfree86 ddx level.
v2: cleanup properly if no driver found.
v3: load the modesetting driver before checking driver list.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On Linux in order for future hotplug work, we are required to interface
to udev to detect device creation/removal. In order to try and get
some earlier testing on this, this patch adds the ability to use
udev for device enumeration on Linux.
At startup the list of drm/kms devices is probed and this info is
used to load drivers.
A new driver probing method is introduced that passes the udev
device info to the driver for probing.
The probing integrates with the pci probing code and will fallback
to the pci probe and old school probe functions in turn.
The flags parameter to the probe function will be used later
to provide hotplug and gpu screen flags for the driver to behave
in a different way.
This patch changes the driver ABI, all drivers should at least
be set with a NULL udev probe function after this commit.
v2: rename to platform bus, now with 100% less udev specific,
this version passes config_odev_attribs around which are an array
of id/string pairs, then the udev code can attach the set of attribs
it understands, the OS specific code can attach its attrib, and then
the core/drivers can lookup the required attribs.
also add MATCH_PCI_DEVICES macro.
This version is mainly to address concerns raised by ajax.
v3: Address comments from Peter.
fix whitespace that snuck in.
rework to use a linked list with some core functions that
xf86 wraps.
v4: add free list, fix struct whitespace.
ajax this address most of your issues?
v5: drop probe ifdef, fix logic issue
v6: some overhaul after more testing.
Implement primaryBus for platform devices.
document hotplug.h dev attribs - drop sysname attrib
fix build with udev kms disabled
make probing work like the PCI probe code,
match against bus id if one exists, or primary device.
RFC: add new bus id support "PLAT:syspath". we probably
want to match on this a bit different, or use a different
property maybe. I was mainly wanting this for use with
specifying usb devices in xorg.conf directly, but PLAT:path
could also work I suppose.
v6.1: add missing noop platform function
v7: fix two interactions with pci probing and slot claiming, prevents
pci and platform trying to load two drivers for same slot.
v8: test with zaphod mode on -ati driver, fixup resulting issue
clean up common probe code into another function, change busid
matching to allow dropping end of strings.
v9: fix platform probing logic so it actually works.
v9.1: fix pdev init to NULL properly.
v10: address most of Keith's concerns.
v4 was thanks to Reviewed-by: Adam Jackson <ajax@redhat.com>
v5 was Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The hooks are left for this cycle, we can drop it next cycle once the
drivers that need it (e.g. wacom) have been updated.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>