Whatever problem this is trying to fix, we don't care. Just include the
thing and stop worrying about whether _POSIX_SOURCE is defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Use conf_data outside of include/ to avoid re-running detection of the
same functions.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Peter Harris <pharris@opentext.com>
Include dix-config.h first to pick up _GNU_SOURCE so we get the
definition for sigset_t.
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Test to build xserver_poll.c was inverted compared to autoconf. Build
xserver_poll.c if poll is missing.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
This makes sure the server will go look at the client again, notice
that the FD is no longer valid and close the client down.
Bugzilla: https://bugs.freedesktop.org/100863
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
There are three copies of the same short sequence of operations to
close down a client when a write error occurs. Create a new function,
AbortClient, which performs these operations and then call it from the
three places.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
This is all just stuff we wish we had in libc, and some of this gets
used in eg. the dmx utilities build, so split it to its own library to
avoid pulling in xserver stuff.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Without this, assertion failures can make life hard for users and those
trying to help them.
v2:
* Change commit log wording slightly to "can make life hard", since
apparently e.g. logind can alleviate that somewhat.
* Set default handler for SIGABRT in
hw/xfree86/common/xf86Init.c:InstallSignalHandlers() and
hw/xquartz/quartz.c:QuartzInitOutput() (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The clever pointer tricks were actually not working, and we were doing
the byte-by-byte moves in general. By just doing the memcpy and
obvious byte swap code, we end up generating actual byte swap
instructions, thanks to optimizing compilers.
text data bss dec hex filename
before: 2240807 51552 132016 2424375 24fe37 hw/xfree86/Xorg
after: 2215167 51552 132016 2398735 249a0f hw/xfree86/Xorg
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
timingsafe_memcmp.c:21:1: warning: no previous prototype for ‘timingsafe_memcmp’ [-Wmissing-prototypes]
timingsafe_memcmp(const void *b1, const void *b2, size_t len)
Signed-off-by: Adam Jackson <ajax@redhat.com>
- typo in #ifdef check
- also need to add AC_CHECK_FUNCS([arc4random_buf])
Reported-by Eric Engestrom. Thanks
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
And the current code for MitToId has a use-after-free() issue.
[Also remove the actual implementations - ajax]
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Provide the function definition for systems that don't have it.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The input thread should generate events, not send them. Make it easier to
find the instances where it's doing so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes a regression from
commit 41da295eb5
Author: Keith Packard <keithp@keithp.com>
Date: Sun Nov 3 13:12:40 2013 -0800
Trap SIGBUS to handle truncated shared memory segments
that causes the SIGBUS handler to fail to chain up correctly and
corrupts nearby memory instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
==8734== Thread 2 InputThread:
==8734== Conditional jump or move depends on uninitialised value(s)
==8734== at 0x2FDB05: InputThreadDoWork (inputthread.c:333)
==8734== by 0x6924423: start_thread (pthread_create.c:333)
==8734== by 0x6C229BE: clone (clone.S:105)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Remove leftover from commit e10ba9e, MAX_TIMES_PER is not used anymore.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Solaris 11.3.5 introduced support for /proc/pid/cmdline, so try it
first, and if we can't open it, then fallback to /proc/pid/psinfo
as we did before.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
A client which is attended while a grab is blocking execution of its
requests needs to be placed in the saved_ready_clients list so that it
will get scheduled once the grab terminates. Otherwise, if the client
never sends another request, there is no way for it to be placed in
the ready_clients list.
v2: Wrap comment above mark_client_saved_ready.
Remove test for OS_COMM_IGNORED which will always be true.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99333
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes a regression introduced in 0b2f30834b. If a driver posts input
events during a timer function (wacom and synaptics do this during tap
timeouts), ProcessInputEvents() is not called for these events. There are no
new events on any fds, so the events just sit in the queue waiting for
something else to happen.
Fix this by simply returning 0 from check_timers if we ran at least one of
them or reset them all. This way the callers ospoll_wait will exit and
continue with normal processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The custom os/os.O library reuses *.o files of os/libos.la.
The current rule assumes automake puts all the objects into per-target
am__*_la_OBJECTS variable. At least with AC_REPLACE_FUNCS, this no
longer holds (as wanted objects are put into LTLIBOBJS instead).
Depend on automake's result, the *.la library instead, to express demand
of any its dependencies being built.
Should be fixing randomly occuring "undefined reference to `strlcpy'"
errors when linking Xvfb and other DDX-es that could use os.O.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
If a work proc wakes up a sleeping client and it is ready to execute,
we need to re-compute the local 'are_ready' value before deciding
what timeout value to use in WaitForSomething.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98030
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
On Linux, setting the main thread's name changes the program name
(/proc/self/comm). Setting it to MainThread breaks scripts that rely on
the command name, e.g. ps -C Xorg.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When putting a device node into a poll-request list, do not overwrite a
"please-remove" element with the same fd, so that a closed device file
is ospoll_remove'd prior to being ospoll_add'ed.
Before, the opposite order was possible, resulting in ospoll_add
considering the newly opened file being already polled, should it have a
fd for which the "please-remove" has not been procesed yet. In this
case, no further events would be seen from the device.
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Regressed-in: 52d6a1e832
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97880
Patchwork: https://patchwork.freedesktop.org/patch/113763/
Hit-and-Reduced-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-and-Reduced-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When a client is marked as write blocked, clear any old 'write ready'
bit in the osfds structure so that a new indication of write ready
(which is marked as edge trigggered) will trigger the callback.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Matthieu Herrb <matthieu@herrb.eu>
When a client with pending output is ready (has request data pending),
FlushAllOutput will skip it to get all of the requests processed
before sending any queued output. That means FlushAllOutput is going
to return with some output pending to a client which isn't known to be
write blocked. And that means NewOutputPending needs to be set so that
FlushAllOutput will get called again to actually go flush this client.
It might be interesting to try just flushing the client to send any
queued data along the way. This patch just restores the server
behavior to what it was before the ospoll changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Matthieu Herrb <matthieu@herrb.eu>
Autoconf logic borrowed from glib
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
If RTLD_DI_SETSIGNAL is set to let us turn runtime linker/loader errors
into catchable signals, then we should only show the errors when catching
that signal, instead of tossing out red herrings to distract people with
unrelated crashes long after their last failed symbol lookup (especially
when using drivers built to support multiple API's by checking which
symbols are available before calling them).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
O_CLOEXEC is not a file bit. It is not setable with F_SETFL. One must
use it when calling open(2). To set it cloexec on an existing fd,
F_SETFD and FD_CLOEXEC must be used.
This also fixes a build failure regression on configurations that don't
have O_CLOEXEC defined.
cf: http://pubs.opengroup.org/onlinepubs/9699919799/functions/fcntl.html
Regressed-in: 30ac756798
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
This change has two effects:
1. Only calls FlushCallbacks when we're actually flushing data to a
client. The unnecessary FlushCallback calls could cause significant
performance degradation with compositing, which is significantly
reduced even without any driver changes.
2. By passing the ClientPtr to FlushCallbacks, drivers can completely
eliminate unnecessary flushing of GPU commands by keeping track of
whether we're flushing any XDamageNotify events to the client for
which the corresponding rendering commands haven't been flushed to
the GPU yet.
Reviewed-by: Adam Jackson <ajax@redha.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
If a file descriptor is added or removed from an ospoll callback, then
the arrays containing file descriptor information will have all of
their indices changed, so the loop state is no longer consistent. Just
bail out and let the caller come back around to try again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of freeing the struct ospollfd elements when the fd is
removed by the user, delay that until epoll is idle so that we are
sure no epoll_event structures could contain the stale pointer. This
handles cases where an fd is removed from the ospoll callback
interface, and also in case the OS keeps stale pointers around after
the call to epoll_ctl with EPOLL_CTL_DEL.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Calling InputThreadRegisterDev twice with the same fd should replace
the existing function and args instead of creating a new entry with
the same fd.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86AddEnabledDevice() prepends the new fd to the list,
xf86RemoveEnabledDevice() then searches for a matching fd and removes that
entry. If this is done for the same fd (and since we lose all information but
the actual fd) we usually unregister virtual devices in reverse order, causing
a dereference of already released memory.
Case in point:
- the wacom driver calls xf86AddEnabledDevice() once for the physical device,
then multiple times for the virtual subdevices
- when the physical device is unplugged, the driver calls
xf86RemoveEnabledDevice() for the physical device
- all we have is the fd, so we end up removing the last virtual device from
the fd set
- xf86DeleteInput() frees the physical device's pInfo
- the fd goes crazy with ENODEV, but a read_input() now passes the already
freed pInfo for the physical device
- boom
Fix this by appending to the fd list to provide bug-for-bug compatibility with
the old SIGIO code. This needs to be fixed in the driver, but meanwhile not
crashing the server provides for better user experience.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Do all timer stuff before blocking, avoiding a bunch of duplicate code
and merge common code in WaitForSomething.
The WaitForSomething changes need a bit of explanation to show that
the new code is effectively equivalent to the old. Eliding error
checking and trivial bits we've got:
Before:
if (ready clients)
timeout = 0
else
compute timeout
i = poll
if (i <= 0) {
if (ready clients)
return TRUE;
if (input)
return FALSE;
if (any ready timers) {
run timers
return FALSE;
}
} else {
if (input)
return FALSE;
if (any ready timers) {
run timers
return FALSE;
}
if (ready clients)
return TRUE;
}
After:
if (ready clients)
timeout = 0;
else
compute timeout
run_timers
poll
if (input)
return FALSE;
if (ready clients)
return TRUE;
The old code would return TRUE if there were ready clients and input
pending. Dispatch would then schedule that ready client, but before
processing any requests, it would notice that there was input pending
and go process it. The new code just checks for input first, which is
effectively the same.
If the poll timed out and there weren't clients ready, then timers
would get run.
If the poll didn't time out, then timers would get run, even if there
were clients now ready. Now, if the timeout interval was zero, that
means that the timers must have been ready *before* poll was
invoked. In this case, we should simply run the timers before calling
poll -- no sense calling poll just to discard any data that it
generates.
If the timeout interval was non-zero, and poll didn't timeout, then
either there aren't any timers to run, or we got a surprise and hit a
timer exactly as a client became ready to run. This is the one case
where the new code is different from the old; the new code delays the
timer call until the next time WaitForSomething is called.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
No sense having an open-coded linked list here, plus the doubly linked
list is more efficient
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
poll provides per-fd notification of failure, so we don't need
CheckConnections anymore.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There's no reason to close these now that we don't care what file
descriptors we use.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There's no reason not to offer ridiculous numbers of clients; only a
few static data structures are arrays of this length.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With no code depending on the range of file descriptors, checking
for that can be eliminated.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Replace use of select(2) to avoid fd limits. Note that
InputThreadFillPipe used select as well, but none of the files passed
were non-blocking, so there was no need for that code at all.
v2: Keep ospoll API usage single threaded to avoid re-entrancy issues
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Eliminates all of the fd_set mangling in the server main thread
v2: Listen for POLLOUT while writes are blocked.
v3: Only mark client not ready on EAGAIN return from read
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This converts the dispatch loop into using a list of ready clients
instead of an array. This changes the WaitForSomething API so that it
notifies DIX when a client becomes ready to read, instead of returning
the set of ready clients.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This provides a wrapper around poll or epoll providing a
callback-based interface for monitoring activity on a large set of
file descriptors.
v2: use xserver_poll API instead of poll. Don't use WSAPoll as
that is broken.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: rename as 'xserver_poll' to avoid potential library name
collisions. Provide 'xserver_poll.h' which uses the system
poll where available and falls back to this emulation otherwise.
Autodetects when this is required, building the emulation only
then
Source: https://github.com/bmc/poll
Signed-off-by: Adam Jackson <ajax@redhat.com>
The file descriptors passed to InputThreadFillPipe are always
blocking, so there's no need to use Select (or poll).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The timeout resolution offered in the AdjustWaitForDelay call is
only milliseconds, so passing around the timeout as a pointer to a
struct timeval is not helpful. Doing everything in milliseconds up to
the point of the select call simplifies the code without affecting
functionality at all.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of having scheduling done in two places (one in
WaitForSomething, and the other in SmartScheduleClient), just stick
all of the scheduling in SmartScheduleClient.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
All uses of these interfaces should instead be using the NotifyFd API
instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of open-coding a single FD wait, use NotifyFd to wait for the
FD to become readable before returning the error message.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This new libXfont API eliminates exposing internal X server symbols to
the font library, replacing those with a struct full of the entire API
needed to use that library.
v2: Use libXfont2 instead of libXfont_2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For link local addresses the XDMCP server would need to either know the
interface thru a scope identifier or try all available interfaces. If
they don't this address will fail in which case the XDMCP server could
still try the other addresses passed - however some only try the first
address and then give up.
Even if this seems to be the wrong place to fix this it seems to be
easier than fixing all display servers.
[ajax: Cleaned up commit message]
Reviewed-by: Adam Jackson <ajax@redhat.com>
As the man page for the latter states:
The effects of signal() in a multithreaded process are unspecified.
We already have an interface to call sigaction() instead, use it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Timer processing can happen on either the main thread or the input
thread. As a result, it must be done under the input lock.
Signals are unrelated to timers now that SIGIO isn't used for input
processing, so stop blocking signals while processing timers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If the server calls AbortServer during the first-time initialization
(which can happen if you start the server on an already using
DISPLAY), then the dbus code will shut down and call the notify fd
interface. If the notify fd list hasn't been initialized, the server
will crash.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The list of input devices may be changed by hotplugging while the
server is active, and those changes may come from either the main
thread or the input thread. That means the list of input devices needs
to be protected by a mutex.
This prevents input drivers from receiving I/O ready callbacks after
removing a device.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By default the X server will try CLOCK_MONOTONIC_COARSE before
CLOCK_MONOTONIC, while A Wayland compositor may only support getting
their timestamps from the CLOCK_MONOTONIC clock. This causes various
issues since it may happen that a timestamp from CLOCK_MONOTONIC
retrieved before a sending an X request will still be "later" than the
timestamp the X server than gets after receiving the request, due to the
fact that CLOCK_MONOTONIC_COARSE has a lower resolution.
To avoid these issues, make Xwayland always use CLOCK_MONOTONIC, so
that it becomes possible for Wayland compositor only supporting
CLOCK_MONOTONIC and X server to use the same clock.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
input_force_unlock was mis-using input_mutex_lock and leaving it set
to -1. As this is executed from OsInit at each server generation, on
the second time through, the mutex would be left locked (!) due to the
trylock call. This caused input to fail after the first server reset.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This matches a change made in xcb and improves performance for a small
increase in memory usage.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By the time we get to ComputeLocalClient, we've already done
NextAvailableClient → ReserveClientIds → DetermineClientCmd (assuming
we're built with #define CLIENTIDS), so we can look up the name of the
client process and refuse to treat ssh's X forwarding as if it were
local.
v2: (Michel Dänzer)
* Only match "ssh" itself, not other executable names starting with
that prefix.
* Ignore executable path for the match.
v3: (Michel Dänzer)
* Use GetClientCmdName (Mark Kettenis)
* Perform check on Windows as well, but only ignore path on Cygwin
(Martin Peres, Emil Velikov, Jon Turney)
v4: (Michel Dänzer)
* Cut of any colon and whatever comes after it. (Adam Jackson)
* Add bugzilla reference.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93261
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The type of fd_mask was changed in Cygwin 2.4.0 headers from 'long' to
'unsigned long'. This exposes an existing problem with winauth.c, which
includes Xwindows.h (which includes windows.h, which defines WIN32),
before including osdep.h, which causes the now conflicting definition of
fd_mask in osdep.h to be exposed:
In file included from ../os/osdep.h:198:18: error: conflicting types for
‘fd_mask’ typedef long int fd_mask; /usr/include/sys/select.h:46:23:
note: previous declaration of ‘fd_mask’ was here typedef unsigned long
fd_mask;
Adjust the include guards in osdep.h to make sure we only use WIN32
guarded code when not compiling for Cygwin (i.e. WIN32 && !__CYGWIN__)
This isn't a very elegant, but unfortunately appears to be the best
solution, since it doesn't seem to be possible to write the test in a
positive form.
Future work: Should also audit of all the other uses of WIN32 in
xserver, and make sure they are correct.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Removed from xtrans in 2012, and never wired up in the modular build
anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
When -displayfd is looping through the possible display ids to use,
if it can't open all the listening sockets for one (say when :0 is
already in use), it calls CloseWellKnownConnections to close all
the ListenTransConns entries before the point that ListenTransFds
was allocated & initialized, so CloseWellKnownConnections would
segfault trying to read entries from a NULL ListenTransFds pointer.
Introduced by commit 7b02f0b8
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=93212
Previously all X servers started with -displayfd would overwrite
Xorg.0.log - now a temporary name of Xorg.pid-<pid>.log is used
until after -displayfd finds an open display - then it is renamed
to the traditional Xorg.<display>.log name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Replace the custom path for dealing with new incoming connections with
the general-purpose NotifyFd API.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This removes the block and wakeup handlers and replaces them with a
combination of a NotifyFd callback and timers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This adds the ability to be notified when a file descriptor is
available for writing.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides a callback-based interface to monitor file
descriptors beyond the usual client and device interfaces.
Modules within the server using file descriptors for reading and/or
writing can call
Bool SetNotifyFd(int fd, NotifyFdProcPtr notify_fd, int mask, void *data);
mask can be any combination of X_NOTIFY_READ and X_NOTIFY_WRITE.
When 'fd' becomes readable or writable, the notify_fd function will be
called with the 'fd', the ready conditions and 'data' values as arguments,
When the module no longer needs to monitor the fd, it will call
void RemoveNotifyFd(int fd);
RemoveNotifyFd may be called from the notify function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows the server to call GetTimeInMillis() after each request is
processed to avoid needing setitimer. -dumbSched now turns off the
setitimer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Globally replace #ifdef and #if defined usage of 'sun' with '__sun'
such that strict ISO compiler modes such as -ansi or -std=c99 can be used.
Signed-off-by: Richard PALO <richard@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
In WaitForSomething(), the fd_set clientsWritable may be used
unitialized when the boolean AnyClientsWriteBlocked is set in the
WakeupHandler(). This leads to a crash in FlushAllOutput() after
x11proto's commit 2c94cdb453bc641246cc8b9a876da9799bee1ce7.
The problem did not manifest before because both the XFD_SIZE and the
maximum number of clients were set to 256. As the connectionTranslation
table was initalized for the 256 clients to 0, the test on the index not
being 0 was aborting before dereferencing the client #0.
As of commit 2c94cdb453bc641246cc8b9a876da9799bee1ce7 in x11proto, the
XFD_SIZE got bumped to 512. This lead the OutputPending fd_set to have
any fd above 256 to be uninitialized which in turns lead to reading an
index after the end of the ConnectionTranslation table. This index would
then be used to find the client corresponding to the fd marked as
pending writes and would also result to an out-of-bound access which
would usually be the fatal one.
Fix this by zeroing the clientsWritable fd_set at the beginning of
WaitForSomething(). In this case, the bottom part of the loop, which
would indirectly call FlushAllOutput, will not do any work but the next
call to select will result in the execution of the right codepath. This
is exactly what we want because we need to know the writable clients
before handling them. In the end, it also makes sure that the fds above
MaxClient are initialized, preventing the crash in FlushAllOutput().
Thanks to everyone involved in tracking this one down!
Reported-by: Karol Herbst <freedesktop@karolherbst.de>
Reported-by: Tobias Klausmann <tobias.klausmann@mni.thm.de>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Tested-by: Tobias Klausmann <tobias.klausmann@mni.thm.de>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91316
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Olivier Fourdan <ofourdan@redhat.com
Cc: Adam Jackson <ajax@redhat.com>
Cc: Alan Coopersmith <alan.coopersmith@oracle.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
xdmcp.c:1404:1: warning: function 'XdmcpFatal' could be declared with attribute 'noreturn'
[-Wmissing-noreturn,Semantic Issue]
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
xdmauth.c:230:13: warning: absolute value function 'abs' given an argument of type 'long' but has parameter of
type
'int'
which may cause truncation of value [-Wabsolute-value,Semantic Issue]
if (abs(now - client->time) > TwentyFiveMinutes) {
^
xdmauth.c:230:13: note: use function 'labs' instead [Semantic Issue]
if (abs(now - client->time) > TwentyFiveMinutes) {
^~~
labs
xdmauth.c:302:9: warning: absolute value function 'abs' given an argument of type 'long' but has parameter of type
'int' which
may cause truncation of value [-Wabsolute-value,Semantic Issue]
if (abs(client->time - now) > TwentyMinutes) {
^
xdmauth.c:302:9: note: use function 'labs' instead [Semantic Issue]
if (abs(client->time - now) > TwentyMinutes) {
^~~
labs
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
These extensions were accessing internal OS functions and
structures. Expose the necessary functionality to them and remove
their use of osdep.h
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
There was a complicated scheme to increase the time between keepalives
from 3 minutes up to as much as 24 hours in an attempt to reduce
network traffic from idle X terminals. X terminals receiving X
traffic, or receiving user input would use the 3 minute value; X
terminals without any network traffic would use a longer value.
However, this was actually broken -- any activity in the X server,
either client requests or user input, would end up resetting the
keepalive timeout, so a user mashing on the keyboard would never
discover that the XDMCP master had disappeared and have the session
terminated, which was precisely the design goal of the XDMCP keepalive
mechanism.
Instead of attempting to fix this, accept the cost of a pair of XDMCP
packets once every three minutes and just perform keepalives
regularly.
This will also make reworking the block and wakeup handler APIs to
eliminate select masks easier.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The X server used to wait for the user to hit a key or move the mouse
before restarting the session after a keepalive failure. This,
presumably, was to avoid having the X server continuously spew XDMCP
protocol on the network while the XDM server was dead.
Switching into this state was removed from the server some time before
XFree86 4.3.99.16, so the remaining bits of code have been dead for
over a decade, and no-one ever noticed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 4b4b9086 "os: support new implicit local user access mode [CVE-2015-3164
2/3]" carefully places the relevant code it adds under !NO_LOCAL_CLIENT_CRED,
but unfortunately doesn't notice that NO_LOCAL_CLIENT_CRED is defined as a
side-effect in the middle of GetLocalClientCreds(), so many of these checks
precede its definition.
Move the check if NO_LOCAL_CLIENT_CRED should be defined to configure.ac, so it
always occurs before it's first use.
v2:
Move check to configure.ac
v3:
Use AC_CACHE_CHECK and name cache varaible appropriately
[ajax: Massaged commit message]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Ray Strode <rstrode@redhat.com>
Commit 94ab7455 added SA_RESTART to the SIGALRM handler. However, the
Popen code tears down and recreates the SIGALRM handler via OsSignal(),
and this flag is dropped at this time.
Clean the code to use just a single codepath for creating this signal
handler, always applying SA_RESTART.
[ajax: Fixed commit id]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
The X server frequently deals with SIGIO and SIGALRM interruptions.
If process execution is inside certain blocking system calls
when these signals arrive, e.g. with the kernel blocked on
a contended semaphore, the system calls will be interrupted.
Some system calls are automatically restartable (the kernel re-executes
them with the same parameters once the signal handler returns) but
only if the signal handler allows it.
Set SA_RESTART on the signal handlers to enable this convenient
behaviour.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Make the maximum number of clients user configurable, either from the command
line or from xorg.conf
This patch works by using the MAXCLIENTS (raised to 512) as the maximum
allowed number of clients, but allowing the actual limit to be set by the
user to a lower value (keeping the default of 256).
There is a limit size of 29 bits to be used to store both the client ID and
the X resources ID, so by reducing the number of clients allowed to connect to
the X server, the user can increase the number of X resources per client or
vice-versa.
Parts of this patch are based on a similar patch from Adam Jackson
<ajax@redhat.com>
This now requires at least xproto 7.0.28
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
backtrace.c uses a word size provided by libunwind. In some
architectures like MIPS, libunwind makes that word size 64-bit for all
variants of the architecture.
In the lines #90 and #98, backtrace.c tries to do a cast to a pointer,
which fails in all MIPS variants with 32-bit pointers, like MIPS32 or
MIPS64 n32, because it's trying to do a cast from a 64-bit wide variable
to a 32-bit pointer:
Making all in os
make[2]: Entering directory
`/home/test/test/1/output/build/xserver_xorg-server-1.15.1/os'
CC WaitFor.lo
CC access.lo
CC auth.lo
CC backtrace.lo
backtrace.c: In function 'xorg_backtrace':
backtrace.c:90:20: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]
if (dladdr((void *)(pip.start_ip + off), &dlinfo) &&
dlinfo.dli_fname &&
^
backtrace.c:98:13: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]
(void *)(pip.start_ip + off));
^
cc1: some warnings being treated as errors
make[2]: *** [backtrace.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
Making the cast to a pointer-sized integer, and then to a pointer fixes
the problem.
Related:
https://bugs.freedesktop.org/show_bug.cgi?id=79939
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the X server is started without a '-auth' argument, then
it gets started wide open to all local users on the system.
This isn't a great default access model, but changing it in
Xorg at this point would break backward compatibility.
Xwayland, on the other hand is new, and much more targeted
in scope. It could, in theory, be changed to allow the much
more secure default of a "user who started X server can connect
clients to that server."
This commit paves the way for that change, by adding a mechanism
for DDXs to opt-in to that behavior. They merely need to call
LocalAccessScopeUser()
in their init functions.
A subsequent commit will add that call for Xwayland.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xorg/xserver/os/utils.c: In function ‘Win32TempDir’:
xorg/xserver/os/utils.c:1643:1: warning: old-style function definition [-Wold-style-definition]
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
