Just simple conversion to use the lookup function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses a standard conversion function to do the conversion.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just use new macros to access scrn->screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
migrate to new helper API.
This just wraps all the obvious uses of xf86Screens[pScreen->myNum],
and should be fairly simple to review.
v2: remove commented out lines.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are just simple functions that we should start migrating drivers
to using.
The end goal is to remove xf86Screens and screenInfo from the ABI.
This includes a define XF86_HAS_SCRN_CONV that drivers can ifdef to provide
their own copies. I'll probably post a generic compat.h file for drivers later.
v2: add asserts.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently if we claim a slot for a PCI driver, we never let it go properly,
this prevents the fallback probe from reusing the slot, even though it
isn't claimed for that pci slot.
So if you set the modesetting driver to point at a specific kms device,
that isn't a PCI device (i.e. USB dongle), then the modesetting driver
loads, the pci probe tries to bind the config slot to the primary PCI
device, however we then check the kms device bus id to discover it
isn't valid. However we don't remove the claim on the slot. Next the
old probe function is called and there is no slots to claim.
This patch fixes that and converts the pciSlotClaimed boolean into
a counter, and changes the unclaim api to take a device pointer
to remove from the entity.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to use udev for gpu enumeration, we need to init udev earlier
than input initialisations. This splits the config init stuff so that udev
pre init sets up before output initialisation.
this is just a prepatory patch, doesn't change anything major.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add the modesetting driver to the fallback list on Linux, after vesa
before fbdev.
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Code was deleted in commit affec10635
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The code to implement was deleted when BaseModules[] was emptied by
the replacement of the "pcidata" module with libpciaccess calls
in commit 46f55f5dea.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The functions are already declared in xf86xv.h
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to generate a 256-entry ramp in [0,65535] which covers the full
range, one must mupliply eight-bit values not by 256 but rather by 257.
Many years back – well before the RANDR extension was written, and
before xorg@fdo – a similar bug fix was made to the DIX for converting
client-supplied eight-bit color values into sixteen-bit values.
Noticed by: Elle Stone and Graeme Gill.
Signed-off-by: James Cloos <cloos@jhcloos.com>
and fix resulting printf warning in dmxLogVisual
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This should hopefully help out wine clients that were continuing to
have issues after the earlier changes.
http://xquartz.macosforge.org/trac/ticket/548
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
We loose information from AppKit being in our way. Before adopting
smooth scrolling, we always rounded-up the number of scroll button
clicks per NSEvent. Now, the scroll value is accumulated in the
dix, and clicky scroll wheels with legacy X11 clients are seeing
an accumulation of error due to so many translations (button press
to smooth scrolling value in AppKit, passed to the dix, and then
synthesized into a button press). This attempts to make the
situation better.
http://xquartz.macosforge.org/trac/ticket/562
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This should have no immediate impact aside from fake mouse buttons no longer
working with tablets (where they aren't needed or desired anyways). This
prepares us for future changes.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
The fact that this has been in place so long makes me really wonder if
anybody cares about this running in Tiger or Leopard.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
If a device was enabled before the VT switch, re-enabled it. Otherwise leave
it as is, there was probably a reason why it was disabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This is the result of re-running the 'x-indent.sh' script over
xf86vmode.c to clean up the disaster caused by broken syntax in the
file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Inside the unfinished XF86VIDMODE_EVENTS #ifdef block the
function definition for xf86VidModeNotifyEvent had an extra ');'
before the prototype argument declarations. This was harmless for the
compiler as the code never gets used, but completely messed up the
file re-indentation. This patch removes the spurious characters in
preparation for re-indenting the file.
Signed-off-by: Keith Packard <keithp@keithp.com>
This reverts commit 55f552adb6.
This appears to cause a crash at init time instead of close.
Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Acked-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
As a PE platform, all symbols in both EXEs and DLLs must be resolved
at link time. As Xorg modules depend on symbols in the Xorg
executable, we must build Xorg before its modules, creating an implib
from the former which is used to link the latter. This implib must
then be installed in order to build the drivers.
Currently only two drivers are supported on Cygwin: xf86-video-dummy
(to replace Xvfb/Xfake) and xf86-video-nested (to replace Xnest/Xephyr).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Cygwin doesn't have ELF rpath capabilities, so these libraries need
to be loaded before the drivers (namely dummy and nested) which
depend on their symbols.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This is necessary when building Xorg and XWin simultaneously, otherwise
undefined symbol errors result in sdksyms.c.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Cygwin libraries use the .dll extension and "cyg" prefix in place of "lib".
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This will be necessary to port Xorg to Cygwin, but other platforms may
find this useful as well.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Excerpt from http://lists.x.org/archives/xorg-devel/2011-March/020481.html:
The Xorg & xorg.conf substitutions are leftover from the transitional
period where some distros were building our sources with the XFree86
and XF86config names until they had time to adjust the rest of their
packages/installer/config code to the new names.
This will fix inconsistencies and prevent the creation of new unneeded
sed patterns.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Excerpt from http://lists.x.org/archives/xorg-devel/2011-March/020481.html:
The Xorg & xorg.conf substitutions are leftover from the transitional
period where some distros were building our sources with the XFree86
and XF86config names until they had time to adjust the rest of their
packages/installer/config code to the new names.
This will fix inconsistencies and prevent the creation of new unneeded
sed patterns.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This lets use send more accurate data to Xi clients and uses dix
for legacy scroll buttons rather than reinventing the wheel.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Also correct isMaster to FALSE while we're here.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
If a FatalError occurs before the server finishes launching, it will
not have drained the launchd-owned DISPLAY socket, so launchd will
just relaunch it. This can cause the server to crash in a tight loop
which will spam the user with CrashReporter windows that claim focus on
appearance.
This allows users stuck in this loop to "deal" with the problem without
popping up a crash report every 10 seconds.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
RENDER has some ugly issues on XQuartz, so add an option to disable RENDER.
Enables workaround for: https://bugs.freedesktop.org/show_bug.cgi?id=26124
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
There is really no real reason why this should be necessary, but wine
developers are stuborn, so doing this to try to work around this wine
issue:
http://bugs.winehq.org/show_bug.cgi?id=29732
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Preparation work for per-device idle counters.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: James Jones <jajones@nvidia.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
indent sometimes adds a blank line between the type and the name in a
function declaration that includes _X_EXPORT, so handle that before
the files are re-indented.
Signed-off-by: Keith Packard <keithp@keithp.com>
Rename functions/macros from list_* to xorg_list_*
Rename struct from struct list to struct xorg_list.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In-sed-I-trust: Peter Hutterer <peter.hutterer@who-t.net>
We don't need anything from that header (which defines /proc & kernel
structures for process information), and it causes some namespace conflicts.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Commit 3b36fd1b49 changed miPointerSetPosition()
to take co-ordinates as doubles, not ints, so this code as it stands is now wrong
(if it ever was correct in the first place :-))
It's unclear that we can safely promote x,y to doubles, apply miPointerSetPosition()
which potentially constrains the cursor, and then convert back to ints.
Fortunately, this whole dance seems to be unnecessary, and we can simply remove the
call to miPointerSetPosition() entirely, and just QueuePointerEvents() like any other
input driver.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Ignore WM_DISPLAYCHANGE messages which indicate bpp is changing to 0.
That has no defined meaning I can find, but some graphics card drivers
appear to generate it on suspend/resume or screensaver activate/deactivate.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The WIN_WINDOW_PROP is removed during WM_DESTROY handling, so it is not neccessary to
remove it in winDestroyWindowsWindow(), and doing so opens a race condition, as we may
attempt to access that property in the wndproc before the WM_DESTROY has completed.
A specific example of that race is if a WM_KILLFOCUS occurs in the window between property
removal and WM_DESTROY processing, where we will attempt to apply DeleteWindowFromAnyEvents()
on an invalid (null) WindowPtr.
Also guard against null WindowPtr in the WM_KILLFOCUS handler
See http://cygwin.com/ml/cygwin-xfree/2012-01/msg00009.html
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Handle the MWM_DECOR_MINIMIZE, MWM_DECOR_MAXIMIZE and MWM_DECOR_MENU
decoration hints in a _MOTIF_WM_HINTS window property
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
I also had problems with the AltGr key. These could reliably
be reproduced by holding the AltGr for some seconds (causing
Windows generating auto repeat events)
I discovered that the mechanism in winkeybd.c function
winIsFakeCtrl_L had a problem if PeekMessage cannot obtain
the next Alt_R message because it is not there yet.
I prepared a patch that remembers the last Ctrl_L event and
reacts on a later Alt_R.
It was also necessary to alter the order in winWindowProc() in
winwndproc.c: the invocation of winIsFakeCtrl_L had to be done
before discarding auto-repeated key presses, as winIsFakeCtrl_L()
now has an internal state which must be updated by all key events.
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Apparently, IBM Leonovo laptops can generate a key-press event for the Fn
key, with virtual key code 0xFF and scan code extended 0x63
Handle this specially, rather than just passing on key code 0x63 (delete),
so you don't delete what you just typed when you adjust the screen brightness,
etc. :-)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Try to be more intelligent with default options, turn on -emulate3buttons by
default if less than 3 mouse buttons are reported by Windows
Also, add -noemulate3buttons option so this default setting can be reversed
if desired
Also, correctly report the number of mouse buttons windows is reporting, rather
than always at least 3
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
In multiwindow mode, avoid grabbing the input focus for newly
created windows which have InputHint FALSE
(this is used by e.g. glean to avoid every test window grabbing
the focus)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Rather than knowing we have to call winProcessXEventsTimeout() for up to 2 WIN_XEVENTS_CONVERT messages, process
all messages in winProcessXEventsTimeout() until either: (i) the time out expired, (ii) an error occurred, or
(iii) received a WIN_XEVENTS_NOTIFY messaage indicating the data has been to put on the clipboard.
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove the variables g_fClipboardLaunched and g_fClipboardStarted from
winInitializeGlobals(), as their re-initialization is handled in the
file hw/xwin/InitOutput.c.
Re-initializing g_fClipboardLaunched and g_fClipboardStarted during
the server reset procedure can lead to the clipboard thread being
launched two times and sometimes leads to a crash of the X server...
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Avoid crashes on shutdown due to the undefined behaviour of calling longjmp() on the
result of setjmp() from a different thread, by chaining IOError handlers and only
jumping back up to the frame for this thread
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
If $HOME/.XWinrc is present but badly formed, ignore it and try
system.XWinrc instead. If neither file is present or both are badly
formed, provide a built-in default which gives the user the chance to
load their new or fixed configuration without restarting.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove no-longer needed tricks used to hide the clipboard client from XDM to prevent
it from being killed
- Delete XQuery wrapper used to hide clipboard client
- Delete XDMCP mode heuristic which waits until some magic number of connections have
been established before starting the clipboard
We still need the EstablishConnection wrapper to ensure that the clipboard client isn't
the first client (causing a server restart if it disconnects)
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Automatically restart clipboard thread on unexpected exit
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This makes it a bit easier to find when staring at the output of
'xwininfo -tree -root'
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
342f3eac84 introduced a bug, 'base' is
incremented before use. The old code corrected this when unmapping, so
the new code should too.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
libdix.a is already provided by XSERVER_LIBS. Including it in libxorgxkb
results can result in duplicate symbols landing in the Xorg binary on some
configurations (buggy glibtool on darwin).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Always install XAA SDK headers so drivers still build even with
--disable-xaa
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Some driver modules try to unload submodules that are now built-in.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't want to unconditionally use I/O routines here, since if the
driver is using mmap'd VGA ports then the I/O handle won't be set up.
Tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Linux kernels since 2.6.38 (March 2011) have an VT KB mode K_OFF in
which special keys (like Ctrl+C) are not interpreted and input is not
buffered. Use of this mode over K_RAW removes the need for a
xf86ConsoleHandler to drain the VT input buffer, removing the grief it
causes when it goes wrong or is (de)initialized out-of-order. (This
also saves a few needless context switches per key event.)
If K_OFF is not defined or not understood by the kernel, K_RAW and the
previous method is used as a fall-back.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Arthur Taylor <art@ified.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
dispatch.h was leftover from an earlier implementation and is no longer
needed, so remove it since including it causes a build failure due to
conflicts between GL/gl.h and OpenGL/gl.h
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Commit c02638fd added the manifest file, but didn't add it to EXTRA_DIST.
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
hw/xwin: Fix duplicate definition of HAS_WINSOCK when building for MinGW
but still provide it if building for Win32 without autotools
xserver/hw/xwin/winclipboard.h:42:0: warning: "HAS_WINSOCK" redefined
../../include/xwin-config.h:11:0: note: this is the location of the previous definition
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Use the same pattern as elsewhere so it's a bit clearer what we
are checking
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winrandr.c: In function ‘winRandRInit’:
winrandr.c:218:31: warning: assignment from incompatible pointer type
Fix winRandRScreenSetSize() function signature to match RRScreenSetSizeProcPtr type,
to align with commit fd9331f6 'Revert "Separate out screen size and screen pixmap
sizes in RRScreenSizeSet"'
This is fall-out from the late revert of RANDR 1.4 in the 1.10 release cycle, it will
probably need to be reverted if/when that goes back in again.
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Um... yeah
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
We don't do anything with EDID v2 blocks besides publish them on the
root window. Worse, the check deleted by this patch would attempt to
take a checksum of arbitrary memory if the rawData array isn't 256+
bytes long (and, for the monitors mentioned, it probably is only 128).
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Check for identifier first and bail if it's missing (also remove the current
identifier check after we've already bailed due to missing identifiers)
If a driver is missing, warn but also say that we may have added this device
already. I see too many bugreports with incorrectly shortened log files.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Side effect of aa0bfb0f133481c57762012e8e30c05ffa151423:
| CCLD Xorg
| sdksyms.o:(.data.rel+0x27d8): undefined reference to `outl'
| collect2: ld returned 1 exit status
Since the linux/ia64 domain I/O support code got removed in that
commit, there's no reason to keep on declaring those functions
(inb, inl, inw, outb, outl, outw).
Bugzilla: https://bugs.freedesktop.org/43985
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Debian's QA tool “lintian” reported a bad whatis entry for the
xorg.conf(.d) manpages.
It comes with the following pointers:
For manual pages that document multiple programs, functions, files, or
other things, the part before "\-" should list each separated by a
comma and a space. […]
Refer to the lexgrog(1) manual page, the groff_man(7) manual page, and
the groff_mdoc(7) manual page for details.
Indeed, the current situation is:
$ whatis xorg.conf; whatis xorg.conf.d
xorg.conf (5) - (unknown subject)
xorg.conf.d (5) - (unknown subject)
With this patch:
xorg.conf (5) - configuration files for Xorg X server
xorg.conf.d (5) - configuration files for Xorg X server
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
While a redirected window is flipped, its pixmap may still be used as
and EGL image and should also get invalidated. When sending invalidate
events for a window, also send the events for its pixmap.
Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Without this, when a compositing manager unredirects a fullscreen window which
uses DRI2 and page flipping, the DRI2 buffer information for the compositing
manager's output window (typically the Composite Overlay Window or root window)
may become stale, resulting in all kinds of hilarity.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=35452 .
[Original patch by Michel Dänzer <michel@daenzer.net>]
[Tree walk optimized version by Keith Packard <keithp@keithp.com>]
Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Otherwise we might keep stale cached information, e.g. after the driver
performed page flipping.
This is part of the fix for
https://bugs.freedesktop.org/show_bug.cgi?id=35452 .
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the client is not behaving correctly and swaps buffers before
getting them, Valgrind will complain about uninitialized memory being
used in DRI2InvalidateDrawable.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Compiler warning:
xinput.c:272: warning: dereferencing pointer 'e' does break strict-aliasing
rules
The code itself is the usual XInput client-side code:
XEvent event;
XDeviceMotionEvent *e = (XDeviceMotionEvent *)&event;
XNextEvent(display, &event);
printf("%d\n", e->type);
Since XDeviceMotionEvent is not guaranteed the same size as XEvent, clients
must use pointer aliasing as above when using the XNextEvent API. Disable
strict aliasing for this example.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
New additions to the API:
- InitTouchClassDeviceStruct
- xf86PostTouchEvent
Changes to the ABI:
- DeviceIntRec now contains a TouchClassPtr
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
xf86PostTouchEvent is the driver API to submit touch events to the server.
This API doesn't do anything yet though but now we can at least bump the
API.
For valuators, drivers should use the existing xf86InitValuatorAxisStruct
function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This allows us to run the server as a normal user whilst still
being able to use the -modulepath, -logfile and -config switches
We define a xf86PrivsElevated which will do the checks and cache
the result in case it is called more than once.
Also renamed the paths #defines to match their new meaning.
Original discussion which led to this patch can be found here:
http://lists.freedesktop.org/archives/xorg-devel/2011-September/025853.html
Signed-off-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Michal Suchanek <hramrach at centrum.cz>
Reviewed-by: Jamey Sharp <jamey at minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
which was added in commit:
dmx: Build fix for -Werror=implicit-function-declaration
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously it always passed a format string with exactly one argument,
using NULL when the format string needed none. Now pass the right number
of arguments to clear gcc warnings of 'too many arguments for format'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Both functions call exit() at the end and have no other return path.
Also correct comment/heading to reflect commit 6450f6ca7e moving
DoShowOptions into xf86Configure.c.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Clears gcc warnings in every file that includes kdrive.h:
kdrive.h:507:1: warning: redundant redeclaration of 'KdAddPointerDriver'
kdrive.h:225:6: note: previous declaration of 'KdAddPointerDriver' was here
kdrive.h:510:1: warning: redundant redeclaration of 'KdAddKeyboardDriver'
kdrive.h:284:6: note: previous declaration of 'KdAddKeyboardDriver' was here
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Clears gcc warning in every file that includes xf86Modes.h:
xf86Modes.h:102:1: warning: redundant redeclaration of 'xf86ValidateModesFlags'
xf86Modes.h:72:1: note: previous declaration of 'xf86ValidateModesFlags' was here
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
It's only used as input to strchr to find the delimiters, never
written to.
Clears a bunch of gcc warnings of the form:
kdrive.c:323:2: warning: passing argument 2 of 'KdParseFindNext' discards qualifiers from pointer target type
kdrive.c:261:1: note: expected 'char *' but argument is of type 'const char *'
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Also fix the reason argument to be const char * to clear several gcc
warnings of:
kdrive.c:151:2: warning: passing argument 1 of 'KdDoSwitchCmd' discards qualifiers from pointer target type
kdrive.c:116:1: note: expected 'char *' but argument is of type 'const char *'
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Since all we do with the option list is walk down the list printing
the names, there's no need to cast away its constness.
Clears gcc warning:
xf86Configure.c: In function 'DoShowOptions':
xf86Configure.c:781:4: warning: cast discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Strings are all pointers to literal constants, just used as input
to printf calls when debugging is enabled.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If we didn't go into the if (!autoconfig) { } block, the filename,
dirname, and sysdirname pointers were never initialized, but we
freed them outside the block, leading to potential memory corruption.
Move the frees inside the block where they're initialized to avoid this.
To avoid similar problems, move the declarations of the variables that
are only used in this block inside the block.
Regression introduced by commit 3d635fe84d
Found by gcc warning:
xf86Config.c: In function 'xf86HandleConfigFile':
xf86Config.c:2303:11: warning: 'filename' may be used uninitialized in this function
xf86Config.c:2303:22: warning: 'dirname' may be used uninitialized in this function
xf86Config.c:2303:32: warning: 'sysdirname' may be used uninitialized in this function
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
It will never return NULL, so don't try to handle a NULL condition,
since that just confuses programmers and static analyzers.
It uses calloc, so all the allocated memory is cleared, so there's
no point looping over the memory to manually initialize it NULL.
And just because it's annoying, it doesn't need to be the only
place in this file to do if (NULL==...) instead of if (... == NULL).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Avoids the dummy-event dance if we have an event type and need to get the
matching XI2 type.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Treat a scandir error from a missing (or unusable) directory return as
if it simply returned no files at all, which is what we want.
cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only kdrive server we probably care about anymore is Xephyr,
and this screen enable/disable code totally breaks it in multi-screen mode.
When you are in one screen the other stops updating.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=757457
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If the pGCPriv->flags == 2, then we try to assign the freed pGCPriv->XAAOps
avoid this by clearing the flags in to be destroyed pGCPriv.
Reported by coverity.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
So on RHEL5 anaconda sets an xorg.conf with a fixed 800x600 mode in it,
we run radeonfb and fbdev since ati won't work in userspace due to domain
issues in the older codebase.
On certain pseries blades the built-in KVM can't accept an 800x600-43 mode,
it requires the 800x600-60 mode, so we have to have the kernel radeonfb
driver reject the 800x600-43 mode when it sees it. However then fbdev
doesn't try any of the other 800x600 modes in the modelist, and we end up
getting a default 640x480 mode we don't want.
This patch changes the mode validation loop to continue on with the other modes
that match to find one that works.
v2: move code around to avoid extra loop, after comment from Jamey.
v3: move loop setup back into loop as per Jeremy's review.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Required in order to build with Studio cc now that xorg-macros is
setting -errwarn=E_FUNC_HAS_NO_RETURN_STMT since a bug in the Solaris
system headers causes the noreturn attribute to not be correctly
applied to the exit() prototype in <stdlib.h> when building with
Studio instead of gcc.
Otherwise compiler exits with errors:
"Display.c", line 65: Function has no return statement : x_io_error_handler
"hostx.c", line 341: Function has no return statement : x_io_error_handler
Uses Studio-specific pragma instead of adding another exit() prototype
with a noreturn attribute to avoid causing gcc to warn about having
a redundant prototype for the exit() function.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Fixes Sun cc warning that was recently elevated to error by the
stricter default CFLAGS changes to xorg-macros:
"loadmod.c", line 914: improper pointer/integer combination: op "<"
Should have been changed when commit ab7f057ce9 changed the
LoaderOpen return type from int to void *.
Changes log message when file is found but dlopen() fails from:
(EE) LoadModule: Module dbe does not have a dbeModuleData data object.
(EE) Failed to load module "dbe" (invalid module, 0)
to:
(EE) Failed to load module "dbe" (loader failed, 7)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Ensure ffs, strndup, strlcat, etc. aren't defined by our headers
if they're already defined in the system headers.
This does export the HAVE_FFS, HAVE_STRNDUP, etc. definitions to drivers,
but if you built the Xserver with a libc that had those, and then build
the drivers with a less capable libc, you're going to have problems anyway,
and this should solve some reported problems with conflicts between our
strndup definition and gcc magic for it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Replace multiple methods of checking for functions with AC_CHECK_FUNCS
Replace multiple methods of selecting fallback funcs with AC_REPLACE_FUNCS
Replace HAS_* and NEED_* #defines with autogenerated HAVE_*
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Commit f9e3a2955d removing the MAXSCREEN limit left the screen
number too unlimited, and allowed any positive int for a screen number:
Xvfb :1 -screen 2147483647 1024x1024x8
Fatal server error:
Not enough memory for screen 2147483647
Found by Parfait 0.3.7:
Error: Integer overflow (CWE 190)
Integer parameter of memory allocation function realloc() may overflow due to multiplication with constant value 1112
at line 293 of hw/vfb/InitOutput.c in function 'ddxProcessArgument'.
Since the X11 connection setup only has a CARD8 for number of SCREENS,
limit to 255 screens, which is also low enough to avoid overflow on the
sizeof(*vfbScreens) * (screenNum + 1) calculation for realloc.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
I wonder if there are any other patterns we haven't seen yet?
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
After we tokenize val.str, we discard it.
This is just one example:
6 bytes in 1 blocks are definitely lost in loss record 24 of 652
at 0x4C2779D: malloc (in vgpreload_memcheck-amd64-linux.so)
by 0x4D744D: xf86getToken (scan.c:400)
by 0x4D75F1: xf86getSubToken (scan.c:462)
by 0x4DB060: xf86parseInputClassSection (InputClass.c:145)
by 0x4D664C: xf86readConfigFile (read.c:184)
by 0x490556: xf86HandleConfigFile (xf86Config.c:2360)
by 0x49AA77: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
After we convert the value to a boolean, we discard the string.
This is just one example:
3 bytes in 1 blocks are definitely lost in loss record 5 of 657
at 0x4C2779D: malloc (vgpreload_memcheck-amd64-linux.so)
by 0x4D744D: xf86getToken (scan.c:400)
by 0x4D75F1: xf86getSubToken (scan.c:462)
by 0x4DB3E0: xf86parseInputClassSection (InputClass.c:189)
by 0x4D664C: xf86readConfigFile (read.c:184)
by 0x490556: xf86HandleConfigFile (xf86Config.c:2360)
by 0x49AA77: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
v2: move the free()s to the function that calls scandir
80 bytes in 1 blocks are definitely lost in loss record 411 of 631
at 0x4C2779D: malloc (vgpreload_memcheck-amd64-linux.so)
by 0x4C27927: realloc (vgpreload_memcheck-amd64-linux.so)
by 0x696A80D: scandir (scandir.c:108)
by 0x4D8828: OpenConfigDir (scan.c:854)
by 0x4D8A43: xf86openConfigDirFiles (scan.c:952)
by 0x49031F: xf86HandleConfigFile (xf86Config.c:2327)
by 0x49A9E3: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We call xf86penConfigDirFiles twice, so we overwrite the configDirPath
variable, losing the pointer. If we move the pointer management to the
upper layer (the function callers), they will be able to call these
functions as many times as they want, but they'll have to free those
returned values.
v2: don't leak inside XWin
4,097 bytes in 1 blocks are definitely lost in loss record 625 of 632
at 0x4C2779D: malloc (in vgpreload_memcheck-amd64-linux.so)
by 0x4D7899: DoSubstitution (scan.c:615)
by 0x4D87B0: OpenConfigDir (scan.c:845)
by 0x4D8A2D: xf86openConfigDirFiles (scan.c:955)
by 0x49031F: xf86HandleConfigFile (xf86Config.c:2327)
by 0x49A9BF: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Not needed since 6cf844ab69 split out the allocation/manipulation
into the helper function, leaving FindModule just copying the pointer
around, and causing gcc warnings and an unreachable call to free.
Also no longer need to store the combined strlen results in dirlen.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Exposed by recent addition of -Wredundant-decls to default CWARNFLAGS
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Matches what linux_agp already does and prevents gcc from throwing up:
sun_agp.c: In function 'xf86DeallocateGARTMemory':
sun_agp.c:236:40: error: cast to pointer from integer of different size
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This batch is the straightforward set - others are more complex and
need more analysis to determine right size to pass.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Found no calls from current driver modules
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Gets rid of duplicate static copy of optionTypeToString by putting
both callers of that helper function in the same source file.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When we want to print a string, it's okay to just print it.
We don't need to first allocate a buffer 2 bytes bigger than the
string, copy the entire string unmodified to the buffer, print the
buffer, and then leak the buffer (though we AbortDDX 8 lines later,
and then just in case we survived that, call exit as well, so the
leak is short lived, just oh so pointless).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
As long as we're carrying around a compatibility copy in os/strl*.c,
might as well use them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
We don't ship either one, so don't waste time and make confusing log
entries trying to load them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Include strlcpy.c in the libdmxconfig.a library with the other functions
shared among the xdmx configuration programs.
Also add a #include "os.h" to the scanner.l file that now calls strlcpy
to include the prototype from $(top_srcdir)/include/os.h.
(To be squashed into
http://cgit.freedesktop.org/~alanc/xserver/commit/?id=c19f0ff5223d428f8ad2ab3c563c974c96a521ba
before next PULL request to avoid breaking bisection.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
At least one revision of the AAO reports a 190x110mm maximum size but a
451x113mm mode.
X.Org Bug 41141 <https://bugs.freedesktop.org/show_bug.cgi?id=41141>
Signed-off-by: Ross Burton <ross@linux.intel.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
The Resource database is reset upon regeneration and so the dri2 module
needs to re-register its RESTYPE for the drawable or else it will
clobber the next unsuspecting user of the database. Fortunately, DRI2 is
loaded late in the initialisation sequence and was last up until
xf86-video-intel started using the Resource database to track
outstanding swaps...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
memType is a uint64_t on powerpc. Using memType only really makes
sense for *physical* addresses, which can be 64-bit for 32-bit
systems running on 64-bit hardware.
However, unmapVidMem() only deals with *virtual* addresses, which
are guaranteed to fit into an uintptr_t.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
245cb8e94f fixed xf86RotateDestroy() to actually run its teardown
code, causing the Damage object to properly be re-allocated after a
server regeneration. However the block that does that still thinks the
Rotate layer BlockHandler is wrapped from the last generation, meaning
the shadow pixmap is never re-allocated and the Damage object is never
re-registered, causing a blank screen, and potentially a driver crash
on the next teardown after the server asks it to free a 0x0 Pixmap.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Wherever it's obvious which device we need (keyboard or pointer), use
GetMaster() instead of GetPairedDevice(). It is more reliable in actually
getting the device type we want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xserver's VESA driver's VBE (Vesa BIOS Extensions) code
includes a PanelID probe, which can get a monitor's native
resolution. From this, using CVT formulas, it derives
horizontal sync rate and a vertical refresh rate ranges.
It however, only derives the upper bounds of the ranges, and
the lower bounds cannot de derived. By default, they are set
to hardcoded constants which represent the lowest supported
resolution: 640x480. The constants in vbe.c however, were
not actually derived from forulas, but carried over from
other code from the bad old days, and are not relevant
to flat panel displays. This caused, for example, EEEPC701's
panel, with a native resolution of 800x480, to end up with
a upper bound of the horizontal sync rate that was lower
than the hardcoded lower bound, which of course broke things.
These numbers have been rederived using both my own CVT tool
based on xf86CVTMode(), and using the provided 'cvt' tool
that comes with xserver.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xorg.conf devices had the name and driver set in the DDX's InputInfoPtr list
but not in the option list for those devices. That information was lost when
passing the options into NewInputDeviceRequest. NIDR then refused to start
the devices.
Introduced in xorg-server-1.11.0-250-ge4cd24e
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: James Cloos <cloos@jhcloos.com>