When the linux kernel sets the NX bit vm86 segfaults when it tries to execute
code in memory that is not marked EXEC. Such code gets called whenever
we return from a VBIOS call to signal the calling program that the call
is actually finished and that we are not trapping for other reasons (like
IO accesses).
Use mprotect(2) to set these memory ranges PROT_EXEC.
Works around a silly bug in the kernel that causes wakeup storms after
too many keypresses. Should fix the kernel bug too, but this at least
keeps the idle wakeup count below 1000/sec.
Also merge sun_bios.c into sun_vid.c and upstream Solaris patch to
keep aperture device open, to allow mappings to occur after X server
has given up uid 0.
Add automatic detection of the graphic driver to load for sbus devices.
This allows xorg to work on those devices without a "Device" section.
Debian bug#483942.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Usually, the console is set to RAW in the kbd driver. If we hotplug all input
devices (i.e. the evdev driver for keyboards) and the console is left as-is.
As a result, the evdev driver must put an EVIOCGRAB on the device to avoid
characters leaking onto the console. This again breaks many things, amongst
them lirc, in-kernel mouse button emulation and HAL.
This patch sets the console to RAW if AllowEmptyInput is on.
Use-cases:
1. AEI is off
1.1. Only kbd driver is used - behaviour as-is.
1.2. kbd and evdev driver is used: if evdev does not grab the device,
duplicate events are generated.
2. AEI is on
2.1. Only evdev driver is used - behaviour as-is, but evdev does not need
to grab the device anymore.
2.2. evdev and kbd are used: duplicate key events are generated if evdev
does not grab the device.
1.2 is a marginal use-case that can be fixed by adding a "grab" option to the
evdev driver (update of xorg.conf is needed).
2.2 is an issue. If we have no ServerLayout section, AEI is on, but devices
specified in the xorg.conf are still added [1], resulting in duplicate events.
This is a common configuration and needs sorting out.
[1] 2eaed4a10f
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There is no way this code can have been building for anyone since pciaccess
was merged. BSD and Linux were already using OS code on sparc, the only
people who could want this are Solaris, who should be using pciaccess
anyway.
This code was effectively only used in ix86Pci.c to select PCI config
access type. Nobody should be using that path anymore, in the glorious
pciaccess world; kernel services should get it right for you.
Spiritual revert of 1fa4de80fc. Intel's C
compiler claims to be gcc-compatible; if they're not defining the same
macros as gcc then that's their bug, not ours. Even if we were to do
this aliasing we should do it once and for all in servermd.h.
GNU/kFreeBSD defines __FreeBSD_kernel__, but not __FreeBSD__.
Unify preprocessor conditionals between variable declaration and use.
Debian bug #482550.
Seeing as this code seems to be specific to OpenBSD I don't think
__x86_64__ should have been added there at all. It appears to have
been added wherever __amd64__ existed before which is wrong. I
think that part of the commit should be reverted but also all four of
the checks should be __OpenBSD__ && __amd64__ instead of two one
direction and two flipped.
The jstk code for Joysticks is not used by any module, was never actually compiled and uses an API
that is deprecated these days.
No reason to keep it.
xserver and libpciaccess both need to open /dev/xf86, which can only
be opened once. I implemented pci_system_init_dev_mem() like Ian
suggested. This requires some minor changes to the BSD-specific
os-support code. Since pci_system_init_dev_mem() is a no-op on
FreeBSD this should be no problem.
FindPCIVideoInfo() function isn't need anymore.
xf86scanpci() is being called only once so we don't need permanent
(static) variables there.
restorePciState() is not used for now (until we find why multiple
cards aren't working).
Matches linuxPci.c changes made in 8279444a54
Fixes compiler errors:
"ix86Pci.c", line 194: too many struct/union initializers
"ix86Pci.c", line 204: too many struct/union initializers
"ix86Pci.c", line 214: too many struct/union initializers
Note that pciaccess doesn't yet have Net/OpenBSD support, but the relevant
code should go there instead of disconnected code in the X Server.
While here, remove the now-disabled INCLUDE_XF86_NO_DOMAIN from the headers,
and un-disable xf8StdAccResFromOS for those OSes without domain support which
will need it.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
This was a bunch of poorly defined resource ranges per OS/platform combination
which were supposed to represent what regions could potentially have resources
allocated into them.
A bunch of CFLAGS had gone missing, so the build failed with errors like:
../../../../../hw/xfree86/os-support/linux/lnx_ev56.c:7:19: error: input.h: No such file or directory
../../../../../hw/xfree86/os-support/linux/lnx_ev56.c:8:24: error: scrnintstr.h: No such file or directory
The outport is most likely unnecessary on any currently used hardware,
the byte copy is necessary from what I know on IA64 and friends so leave it.
Add a new API entry point which lets a driver select the old behaviour if
such a needs is ever found.
This gives me ~20% speed up on startup on 945 hardware.
The code in hw/xfree86/os-support/bus/sparcPci.c:simbaCheckBus()
is trying to mimmick VGA routing by disabling I/O space responses
behind the Simba PCI-PCI controller.
Unfortunately, doing this also happens to disable access to the
IDE controller I/O space registers, thus crashing the system. The
granularity of the I/O disabling in the Simba controller is not
fine enough to disable VGA without also disabling the IDE controller
registers.
Formerly we sized an array with a compile time constant, then initialized
its size to the same constant, but the Linux PCI init code would increase
that "constant". So if you happened to have more than 128 PCI devices,
you'd happily scribble into whatever variables happened to be in .bss
after that array.
Only really fixed for Linux atm. Other OSes will simply (still) fail to
work on video devices above the 128th PCI device.
/sys/devices reflects the bus topology, and we don't care that much.
Easier (and more reliable) to just look in /sys/bus/pci/devices, which
is a flat view.
Currently, the call to linuxPciOpenFile() is always made for read
only access which causes the subsequent mmap call to fail when the
memory is mapped read/write.
Xorg #9692
xf86ReadLegacyBIOS is only used by one function in int10/generic.c.
Move a generic implementation of that function there, rename it to
read_legcay_BIOS, and delete all remnants of it from all other places.
Convert xf86GetPciHostConfigFromTag to a new function called
get_parent_bridge. This name better represents what
xf86GetPciHostConfigFromTag is used for: walking up the lists of PCI
bridges from a device.
Eliminate xf86GetPciDomain. The domain from libpciaccess is the
domain. Period. This means that 0 is a valid domain. Make sure that
INCLUDE_XF86_NO_DOMAIN is *not* set. Always run in "domain mode,"
even if the only domain possible is 0.