Lots more const char stuff.
Remove duplicate defs of CoreKeyboardProc and CorePointerProc from
test/xi2/protocol-common.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When a grab on a slave device is deactivated, the master device must
be checked, just in case there were events from other devices while
the slave device was stolen away by the passive grab. This may
introduce misbehaviors on mismatching valuators and device features
later on UpdateDeviceState().
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If an touch triggers an async button grab and that grab does not have the
ButtonReleaseMask set, the TouchEnd is never delivered, deliveries is 0 and
the grab is never deactivated.
If the grab is pointer async and keyboard sync, the keyboard events are stuck
in EnqueueEvent until some other pointer event terminates the grab.
Change this to check for the number of listeners. If we're about to deliver a
TouchEnd to a passive pointer grab, the number of listeners is already 1 -
pointer grabs always accept so other listeners were removed.
X.Org Bug 71878 <http://bugs.freedesktop.org/show_bug.cgi?id=71878>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bug #71878 describes a bug resulting in the server ceasing to respond to
keyboard input after a touch event. The problem might be the following:
DeliverTouchBeginEvent tries to deliver an event to a listener of type
LISTENER_POINTER_REGULAR, taking the following if branch,
if (listener->type == LISTENER_POINTER_REGULAR ||
listener->type == LISTENER_POINTER_GRAB) {
rc = DeliverTouchEmulatedEvent(dev, ti, ev, listener, client, win,
grab, xi2mask);
if (rc == Success) {
listener->state = LISTENER_IS_OWNER;
/* async grabs cannot replay, so automatically accept this touch */
if (dev->deviceGrab.grab &&
dev->deviceGrab.fromPassiveGrab &&
dev->deviceGrab.grab->pointerMode == GrabModeAsync)
ActivateEarlyAccept(dev, ti);
}
goto out;
}
DeliverTouchEmulatedEvent succeeds. The deviceGrab meets all
three of the conditions of the inner if, enters
ActivateEarlyAccept which then fails due to,
BUG_RETURN(ti->listeners[0].type != LISTENER_GRAB &&
ti->listeners[0].type != LISTENER_POINTER_GRAB);
That is, despite listener->type == LISTENER_POINTER_REGULAR. With my
non-existent knowledge of XINPUT, it seems like the solution here
might be to only ActivateEarlyAccept when listener->type ==
LISTENER_POINTER_GRAB.
Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
gcc -Wlogical-op
exevents.c: In function 'DeliverEmulatedMotionEvent':
exevents.c:1480:13: warning: logical 'or' of collectively exhaustive
tests is always true [-Wlogical-op]
The relevant snippet of exevents.c:
1479 if (ti->listeners[0].type != LISTENER_POINTER_REGULAR ||
1480 ti->listeners[0].type != LISTENER_POINTER_GRAB)
1481 return;
This condition was always true, causing dropped motion events.
Reported-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
XIAllowEvents changed length in XI 2.2 (for the touchid). A bug in libXi
causes libXi to always use the new request length if the server supports
2.2, regardless of the client's XIQueryVersion request.
The server takes the client's XIQueryVersion request into account though,
resulting in a BadLength error if a 2.[0,1] client calls XIAllowEvents on a
XI 2.2+ server.
Can't fix this in libXi, so work around this in the server.
X.Org Bug 68554 <http://bugs.freedesktop.org/show_bug.cgi?id=68554>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Do not allow setting client version to an arbitrary value >= XIVersion.
Fixes a test error with test/xi2/protocol-xiqueryversion.c, introduced by
commit 4360514d1c "Xi: Allow clients to ask for 2.3 and then 2.2 without failing"
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This allows different sub-systems within the same application to
request different Xi versions without either getting old behaviour
everywhere or simply failing with a BadValue.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Ungrabbing a device during an active touch grab rejects the grab. Ungrabbing
a device during an active pointer grab accepts the grab.
Rejection is not really an option for a pointer-emulated grab, if a client
has a button mask on the window it would get a ButtonPress emulated after
UngrabDevice. That is against the core grab behaviour.
X.Org Bug 66720 <http://bugs.freedesktop.org/show_bug.cgi?id=66720>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
If we have one listener left but it's not a grab, it cannot be in
LISTENER_HAS_ACCEPTED state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Introduced in xorg-server-1.13.99.901-2-g9ad0fdb. Storing the grab pointer
in the listener turns out to be a bad idea. If the grab is not an active
grab or an implicit grab, the pointer stored is the one to the grab attached
on the window. This grab may be removed if the client calls UngrabButton or
similar while the touch is still active, leaving a dangling pointer.
To avoid this, copy the grab wherever we need to reference it later. This
is also what we do for pointer/keyboard grabs, where we copy the grab as
soon as it becomes active.
Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
EmitTouchEnd calls DeliverTouchEvents directly instead of through
public.processInputProc. If a device is frozen, the TouchEnd is
processed while the device is waiting for a XAllowEvents and thus ends the
touch point (and the grab) before the client decided what to do with it. In
the case of ReplayPointer, this loses the event.
This is a hack, but making EmitTouchEnd use processInputProc breaks
approximately everything, especially the touch point is cleaned up during
ProcessTouchEvents. Working around that is a bigger hack than this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device is frozen in results to a grab, we need to enqueue the events.
This makes things complicated, and hard to follow since touch events are now
replayed in the history, pushed into EnqueueEvent, then replayed later
during PlayReleasedEvents in response to an XAllowEvents.
While the device is frozen, no touch events are processed, so if there is a
touch client with ownership mask _below_ the grab this will delay the
delivery and potentially screw gesture recognition. However, this is the
behaviour we have already anyway if the top-most client is a sync pgrab or
there is a sync grab active on the device when the TouchBegin was generated.
(also note, such a client would only reliably work in case of ReplayPointer
anyway)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a touch is pending_finish and we just punted it to the next owner, that
client must receive a TouchEnd event.
If we just punted to the last owner and that owner not a touch grab, we need
to end the touch since this is the last event to be sent, and the client
cannot accept/reject this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Delivering an event changes the state to LISTENER_IS_OWNER and we thus lose
the information of early acceptance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ActivateEarlyAccept() can only be called from a grabbing client, so we can
ignore the rest. And it's easy enough to get the client from that since
9ad0fdb135.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a TouchBegin is sent to a core client, that client is now the owner.
By the time the TouchEnd is being processed, the client cannot replay
anymore, so we can assume that this is the final touch end and we can clean
up the touch record.
Note: DeliverTouchEmulatedEvent is called for all listeners and immediately
bails out if the client is not the owner and thus shouldn't yet get the
event. Thus, check the return code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ef64b5ee97 (which introduced the
TOUCH_CLIENT_ID check) has a wrong assumption that generated touch events
(TOUCH_CLIENT_ID) should not terminate passive grabs.
This is untrue, a TouchEnd may be generated in response to a TouchReject
higher up. If we _deliver_ an event to a client, terminate the passive grab.
This requires us to count the actually delivered events too (first hunk).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If we only have a single touch-grabbing client, setting the client as owner
would clean up the touch once the TouchEnd was processed. If the client then
calls XIAllowTouches() it will receive a BadValue for the touch ID (since
the internal record is already cleaned up).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If drivers supply incorrect values don't just quietly return False, spew to
the log so we can detect what's going on. All these cases are driver bugs
and should be fixed immediately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
==29423== 16 bytes in 1 blocks are definitely lost in loss record 73 of 328
==29423== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==29423== by 0x5987C0: XIBarrierInit (xibarriers.c:908)
==29423== by 0x58F370: XInputExtensionInit (extinit.c:1300)
==29423== by 0x4F33C3: InitExtensions (miinitext.c:337)
==29423== by 0x4997DB: main (main.c:208)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The only controls that still do something are DEVICE_RESOLUTION and
DEVICE_ENABLE.
XTest devices have no resolution to change, and they cannot be disabled. So
skip the lot, and prevent a crash in the DDX when it's trying to
de-reference pInfo->control_proc on device with no pInfo struct.
Likewise, don't allow setting device mode or the valuators.
XTest pointers are always relative, they don't have a mode.
Test cases:
xts5/XI/ChangeDeviceControl (1/10)
xts5/XI/SetDeviceValuators (1/6)
and a few others
Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Comment dates back to a pre-release version of XI2 that supported keysym
grabs. That never made it into a release, it was ditched before.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This prevents xts XI/XDeviceBell-2 test
from segfaulting the server.
Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The protocol says that the grab_mode argument applies to the device
being grabbed and paired_device_mode to the paired master
device. GrabDevice() however takes in a pointer mode and a keyboard
mode and so we have to swap the values according the type of device
being grabbed.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The event struct is different, causing memory corruption on 1.13 and 1.14,
as can be witnessed in https://bugs.freedesktop.org/show_bug.cgi?id=56578
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Write the swapped values to the destination rather than the source.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The commit message to 6764471901 explains it,
but that doesn't stop the WTF moment when reading the code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
We do the same thing here, compress them into one body.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Instead of accessing ti->listener[0] all the time.
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
All callers currently ignore the new value, so this patch has no effect.
Inverse call graph:
DeliverTouchEmulatedEvent
DeliverEmulatedMotionEvent Ignores value
DeliverTouchBeginEvent
DeliverTouchEvent
DeliverTouchEvents Ignores value
DeliverTouchEndEvent
DeliverTouchEvent
DeliverTouchEvents Ignores value
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
dtime to the previous event is 0 on the first BarrierHit event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
mask[(MAX_VALUATORS + 7)/8] is larger than data[MAX_VALUATORS], so static
code checkers think we may be running OOB on the data array. Mask is
initialized to 0, so this should not happen, but change it anyway to shut up
code analyzer noise.
X.Org Bug 59939 <http://bugs.freedesktop.org/show_bug.cgi?id=59939>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Instead of guessing what resource type the listener is and what property to
retrieve, store the resource type in the listener directly.
Breaks XIT test cases:
TouchGrabTestMultipleTaps.PassiveGrabPointerEmulationMultipleTouchesFastSuccession
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=56557
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
This places a pointer to the grab related to a TouchListener directly
in the TouchListener structure rather than hoping to find the grab
later on using the resource ID.
Passive grabs have resource ID in the resource DB so they can be
removed when a client exits, and those resource IDs get copied when
activated, but implicit grabs are constructed on-the-fly and have no
resource DB entry.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Conflicts:
Xi/xichangehierarchy.c
Small conflict with the patch from
Xi: don't use devices after removing them
Was easily resolved by hand.
Signed-off-by: Keith Packard <keithp@keithp.com>
When a client shuts down and resources are being freed, the window may have
been freed already, so accessing it to get the window ID is bad. Plus, we
never care about the window anyway other than for stuffing it into the
event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
RemoveDevice() frees the DeviceIntPtr, we shouldn't use the pointer after
that
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Protocol events don't contain pointers, so it's easier to copy everything
over, then swap in-place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
If the grab_window is the barrier window and the client owns the grab,
deliver as normal grabbed event (respecting owner_events). Otherwise,
deliver as usual.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
x/y for barrier events should contain the actual pointer position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Instead of having the pointer barrier code enqueue events separately from
GetPointerEvents, pass the event list through and let it add to it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This allows clients to add barriers that extend to the edge of the
screen. Clients are encouraged to use these instead of precise coordinates
in these cases to help prevent pointer leaks.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Since barriers are axis-aligned, we can do the intersection test with
simple interpolation rather than line-segment intersection. This also
helps us out in the future when we want the barriers to extend to be
rays and lines rather than just segments.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This ensures that we always complete an event sequence.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Rename a variable. This is to make the diff in the next commit cleaner.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Additionally, add flags when the pointer is released.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
We eventually want to send a new notify event on hitbox leave,
which signifies the dawn of a new barrier event ID, so it's
convenient if we can put the code here.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Pointers (and the hands that drive them) aren't very precise, and the
slightest amount of nudging to either side might be enough to reset
the event ID, making clients think they have an entirely new hit. Allow
for a slightly bigger "hit box" before these barriers get reset.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
If we release a barrier, we want to ensure that we block all
other barriers afterwards, rather than capping the limit to
the two nearest barriers.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This adds support for clients that would like to get a notification
every time a barrier is hit, and allows clients to temporarily release
a barrier so that pointers can go through them, without having to
destroy and recreate barriers.
Based on work by Chris Halse Rogers <chris.halse.rogers@canonical.com>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is to make future diffs much cleaner. Best viewed with -w.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When we add events, we eventually want to add more state to the
PointerBarrierClient, so return one of these instead of the dummy
public structure that's not very interesting.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than riding on the ConstrainCursorHarder hook, which has
several issues, move to an explicit hook, which will help us with
some RANDR interaction issues.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is completely pointless as far as I can tell.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to send events to specific windows associated with the barrier,
we need to move the code that handles barriers to somewhere where it's
easier to construct and send events. Rather than duplicating XSync with
its XSyncSelectAlarm, re-use the existing XI infrastructure.
For now, just move a bunch of code over, rename some things, and initialize
the new structures, but still consider it a separate codebase. Pointer barrier
requests are still handled by XFixes, so this is a weird intermediate state.
It's unknown whether we'll add explicit requests to pointer barriers inside
XI.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
There are limits on which client may select for touch events on a given
window, with restrictions being that no two clients can select on the same
device, but narrower selections are allowed, i.e. if one client has
XIAllDevices, a second client may still select for device X.
The current code had a dependency on which client selected first and which
device, resulting in inconsistencies when selecting for events. Fix that,
responding with the right errors regardless of who selected what first.
X.Org Bug 57301 <http://bugs.freedesktop.org/show_bug.cgi?id=57301>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Once the TouchEnd appears on the device, the touch is done. If the client
still has a pointer grab, accept it to avoid clients with TouchOwnership
selections to wait indefinitely for the actual touch event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The formatter confused address operators preceded by casts with
bitwise-and expressions, placing spaces on either side of both.
That syntax isn't used by ordinary address operators, however,
so fix them for consistency.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
As before GetTouchEvents causes unwanted side effects. Add a new
function GetDixTouchEnd, which generates a touch event from the touch
point. We fill in the event's screen coordinates from the MD's current
sprite position.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XIPassiveGrabDevice uses a list of uint32_t as modifier sets.
The ModifierInfo struct represents the current modifier states and is
therefor used in XIQueryPointer and various events.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The double_to_f1616() functions do the same thing, and they're tested.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Button mask should be out-of-band with the emulated
pointer events as touch devices don't truly have
"buttons". Even though, it's handy to have the modifier
mask from the paired keyboard on touch events.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Ensure emulated pointer events contain the state that applies before the
event was processed, so the device state must be updated after delivering
such emulated events.
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Disabling a XTest device followed by an XTest API call crashes the server.
This could be fixed elsewhere but disabled devices must not send events
anyway. The use-case for disabled XTest devices is somewhat limited, so
simply disallow disabling the devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
exevents.c: In function 'ProcessTouchEvent':
exevents.c:1601:20: warning: too many arguments for format
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
ABS_MT_DISTANCE exists since kernel v2.6.38,
ABS_MT_TOOL_X|Y appeared in v3.6.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a client is still waiting for the TouchBegin, don't deliver a TouchEnd
event.
X.Org Bug 55738 <http://bugs.freedesktop.org/show_bug.cgi?id=55738>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Thomas Jaeger <thjaeger@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
If the status is other than Success, the code will set it to the required
value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Given the following scenario:
1) client A selects for TouchBegin on window W for device D
2) client B selects for TouchBegin on window W for XIAllDevices
3) client C selects for TouchBegin on window W with device E
Step 3 will fail with BadImplementation, because attempting to look up
XIAllDevices or XIAllMasterDevices with dixLookupDevices doesn't work.
This should succeed (or, if it was selecting for device D, fail with
BadAccess as it would be a duplicate selection).
Fix this by performing the appropriate lookup for virtual devices.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Chase Douglas <chase.douglas@ubuntu.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This flag is never set, so checking for it here means that we'll
never release the simulated mouse button press after the user touches
(and releases) the touchscreen for the first time.
Fixes a problem where the XO laptop touchpad became totally
unusable after touching the screen for the first time (since X then
behaved as if the mouse button was held down all the time).
Signed-off-by: Daniel Drake <dsd@laptop.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The indenter seems to have gotten confused by initializing arrays of
structs with the struct defined inline - for predefined structs it did
a better job, so match that.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reported by parfait 1.0:
Error: Memory leak (CWE 401)
Memory leak of pointer 'prop' allocated with XICreateDeviceProperty(property)
at line 774 of Xi/xiproperty.c in function 'XIChangeDeviceProperty'.
'prop' allocated at line 700 with XICreateDeviceProperty(property).
prop leaks when handler != NULL at line 768
and handler->SetProperty != NULL at line 769
and checkonly != 0 at line 772
and rc != 0 at line 772.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the owner of a touch accepts it, the other listeners must
receive a TouchEnd.
Even though there's code implementing the logic above in
ProcessTouchOwnershipEvent(), DeliverTouchEndEvent() was refusing to send
those TouchEnd events in this situatuation.
Signed-off-by: Daniel d'Andrada <daniel.dandrada@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These were an unused remnant of earlier MPX work; their only users got
cleared out in dc153271, but the mask declarations remained. Remove
them, and move DevicePropertyNotify's mask up to be contiguous with the
rest of the range.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Does what it says on the box, replacing those from Xi/ and glx/.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Number of devices is 2 + MAXDEVICES, with index 0 and 1 reserved for
XIAll{Master}Devices. At the current size, PropagateMask would be overrun in
RecalculateDeviceDeliverableEvents().
Found by Coverity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Devices are unpaired as needed on DisableDevice now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
DeleteInputDeviceRequest is called from CloseDownDevices on reset, so
call RemoveDevice to avoid leaking devices in Xvfb/Xnest/Xwin.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>