Using type == DRAWABLE_WINDOW to differentiate between pixmaps and
windows isn't sufficient as input-only windows will end up in the
pixmap case. This patch changes a few more code paths to use
WindowDrawable instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
The internals of XTest are used by Xi and Xkb, and both Xi and Xkb are
always required, so it makes little sense to have XTest place data in
a devPrivate, especially a devPrivate which is only available when the
XTest extension is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make sure all of the private keys used by the test code are
initialized before being used.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Robert Hooker <sarvatt@ubuntu.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This makes all of the previous macros into inline functions and also
turns all of the direct calls to pixman region code into inline
functions as well.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fuses two loops in each function, eliminating an intermediate
MAXSCREENS-sized array from each.
Aside from being more efficient, I believe this is equivalent to the
previous implementation, since
- each per-screen GC has the graphicsExposures flag set the same way,
and
- the REGION_* macros ignore their screen argument.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Every screen region consists of a single rectangle, so initializing a
stack-allocated region for each screen on-demand does no heap allocation
and is fast.
This eliminates a MAXSCREENS-sized array.
The REGION_UNINIT calls are no-ops since no boxes are actually allocated
for a single-rectangle region, but it seemed wiser to include them.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
This hides a MAXSCREENS-sized array as an implementation detail of
panoramiX.c rather than an exported global.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Most references to the savedScreenInfo array already had the
corresponding screen pointer handy, which meant they usually looked like
"savedScreenInfo[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Propagate the shape kind all the way to SetShape to avoid performing non-input
operations such as revalidating the tree and generating exposures when only
changing a window's input shape.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Acked-by: Aaron Plattner<aplattner@nvidia.com>
Reviewed-by: Daniel Stone<daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Access to pDesc was always guarded by (nCharInfos > 0), so the code
wasn't actually buggy, but this makes it clear that it's correct.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Rather than always returning BadValue, associate an error status like
BadWindow with a resource type like RT_WINDOW, and return the
appropriate one for the requested type.
This patch only touches the core protocol resource types. Others still
return BadValue and need to be mapped appropriately.
dixLookupResourceByType can now return BadImplementation, if the caller
asked for a resource type that has not been allocated in the server.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If filter is NoEventMask (aka CantBeFiltered), grab is null, and the
first event is not in the set of "critical events", then TryClientEvents
simply calls WriteEventsToClient. In that case, it returns 0 for fake or
dead clients, and 1 otherwise. Inline for this special case.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
TryClientEvents already did this; this commit just moves the assignment
one level down so that no event source has to worry about sequence
numbers.
...No event source, that is, except XKB, which inexplicably calls
WriteToClient directly for several events.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This matches the test in TryClientEvents, and is a superset of tests
done by the callers of these functions. The consequence of forgetting
these tests is a server crash, so they're always desirable. In my
opinion, it's better to not require the callers to remember to do these
checks.
For callers that don't do very much work before calling WriteToClient or
WriteEventsToClient, I've removed the redundant checks.
hw/xquartz/xpr/appledri.c has an interesting case: While its check for
"client == NULL" appears redundant with the test in WriteEventsToClient,
it dereferences client to get the sequence number.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27497
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
So don't bother doing those steps again.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Commit eb9210097e removed the
sidget/sidput calls which were the major reason for using the
callbacks. The remaining operations can be skipped or worked
around.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently, SyncComputeBracketValues reuses old values of bracket_greater
and bracket_less when startOver = FALSE. This can result in incorrect bracket
values. To fix this issue, the startOver parameter is removed, and we do not
reuse old values of bracket_greater and bracket_less.
X.Org Bug 27023 <http://bugs.freedesktop.org/show_bug.cgi?id=27023>
Signed-off-by: David James <davidjames@google.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The structure of the adaptor-matching algorithm was obscured by trying
to use "continue" and "break" as the only control-flow primitives. It's
a lot more clear if you add "return" to that set.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
A call to miPointerUpdateSprite for the XTEST keyboard may result in a
NULL pointer dereference in miDCPutUpCursor() when the save buffer is NULL.
XTS test case: Xlib 11 KeymapNotify
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This header doesn't seem to be used outside the server tree, so I don't
think anything was depending on these except what I've fixed in this
patch.
FORCE_ROOT is not used anywhere, and never has been in all the history
that's in git. ajax removed its FORCE_WIN and FORCE_CMAP companions
three years ago, in 04b87d6dfa.
BREAK_IF and IF_RETURN expanded to exactly the keywords in their names,
which is silly. They were rarely used and served only to make callers
inconsistent with the idioms used elsewhere in the server.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The rationale behind is because no sane application will use this when we have
modern APIs such DRI2. Besides, as a fact, xfree86 server has already
deprecated this extension in 1998:
http://www.xfree86.org/3.3.6/isc7.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
The GenericEvent is a core event, we never send an extension event, so
don't reserve an id for one.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Make sure the reference count of the new cursor is increased before the old
one is decreased, otherwise bad things will happen if they're one and the
same and the reference count is 1 initially. Not sure this can actually happen
here, but better safe than sorry.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xext/xf86bigfont.c contains three non-static functions which are called
elsewhere in the server. This creates a new header containing these
declarations in order to fix several warnings:
xf86bigfont.c:285: warning: no previous prototype for `XF86BigfontFreeFontShm'
dixfonts.c:502: warning: implicit declaration of function `XF86BigfontFreeFontS$
dixfonts.c:502: warning: nested extern declaration of `XF86BigfontFreeFontShm'
log.c:436: warning: implicit declaration of function `XF86BigfontCleanup'
log.c:436: warning: nested extern declaration of `XF86BigfontCleanup'
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Although the DDX should be linked to the necessary libraries, we may
also need to pull them in directly to the module to ensure the symbols
are resolved at runtime. Should fix this bug with XSELINUX:
/usr/bin/X: symbol lookup error:
/usr/lib64/xorg/modules/extensions/libextmod.so: undefined symbol:
is_selinux_enabled
-v2: use _LIBADD instead of _LIBS; remove SELINUX_LIBS from
XSERVER_SYS_LIBS as it should only be needed in extmod.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Starting with libselinux 2.0.86, SID objects are no longer
reference counted and the sidput() and sidget() calls are no-ops.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
