This just fixes the regression whereby we couldn't switch between the legacy
fullscreen mode and rootless on multi-monitor configurations. This was
happening because ref wasn't being set in these cases (since we don't ever
actually change CG modes), so we failed a CFEqual. Setting the references
fixes this regression and places us one step closer to more mode RandR
mode switching in multi-monitor configurations.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Never implemented in any open source driver. The implementation
assumed explicit DDX driver knowledge of how the client-side driver
worked, since at the time the server's GL renderer was not a DRI driver.
But now, it is, so any implementation of these should be done with
additional DRI driver API, like the swap control extension.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The version check is hackish, and I highly doubt anyone using this code is on
a version of OS X that predates this support (10.2 has support for it).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Adds three new functions
void QuartzRandRSetFakeRootless (void);
void QuartzRandRSetFakeFullscreen (void);
void QuartzRandRToggleFullscreen (void);
The first two are identical to requesting the fake modes from a RandR client
The third responds to cmd-alt-a to leave fullscreen or RandR.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Report a fake screen mode that corresponds to the screen mode at startup of the
server excluding the height of the menu bar. If a client requests this mode,
rootless mode is enabled. In all other modes, the root window is shown.
Signed-off-by: Jan Hauffa <hauffa@in.tum.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Querying and changing of resolution and refresh rate is supported,
rotation is not implemented yet.
Signed-off-by: Jan Hauffa <hauffa@in.tum.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Some functions had to be moved around due some missing static definitions.
Another minor clean up like inexistent function declarations and etc were made
also.
Part of this patch was cooked using:
sed -i -e '/static DISPATCH_PROC*.*;/d' `git ls-files`
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Jeremy deleted rootlessAccelInit's implementation in 2008 in commit
587c010a1c. Delete its prototype and the
remaining commented-out call to it.
It still makes sense for the rootless GC ops to relax the planemask, but
that's independent of the size of the operation, so quit checking the
thresholds there.
FillBytes and CompositePixels are not called anywhere, so delete
everything related to both.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
The driOps field of this structure is never set to anything but
&driGCOps, and this structure is not visible outside this source file.
Just use the constant in the one place the field was used.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We still have the issue with not raising the frontmost window for the case
when spaces is enabled, and the AppleSpacesSwitchOnActivate preference is
disabled.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
We were incorrectly NULLing out pDraw in __GLXDrawable instead of ours in
__GLXAquaDrawable. (we should refactor to eliminate this redundancy later)
This was causing http://xquartz.macosforge.org/trac/ticket/426
This was benign until commit f0006aa58f
The root cause of this change was fed7ccc481ad1caaa518cafe944c2327a5d0b6c65
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)