A cosmetic change for automake (though we have to replicate some of
xorg-macros.m4 in manpages.am now), but meson's configure_file() wants
@-delimited strings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The check for "no modifier specified" in drmmode_is_format_supported()
should check for DRM_FORMAT_MOD_INVALID, not for zero, as zero actually
means DRM_FORMAT_MOD_LINEAR.
This allows page-flipping again when appropriate, as
tested under nouveau and ati drivers.
Fixes: 9d147305b4 ("modesetting: Check if buffer format is supported when flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Travis has only so many OSX builders, presumably due to the EULA
requiring that it be run on Apple-branded hardware. They're also really
slow to provision, presumably because they're virtual machines and not
containers. In any case it's not something I'm willing to be punished
for.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The image now has enough mojo to run xts, hooray!
Note there's a couple of ugly bits in here. The piglit config fragment
and stock tetexec.cfg reflect missing features from the test suites
(using an installed copy of xts, figuring out the xserver test matrix at
runtime, etc.), I'll be happy to remove them once the tests are fixed.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Allow switching to another driver build without a full installation.
Glamor already takes LIBGL_DRIVERS_PATH into account, so this change
makes sure that the same driver is used in both parts of the server.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
[... but leave it defined and exported, since we're ABI-frozen - ajax]
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
restore abi
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
Having different types of code all trying to check for elevated privileges
is a bad idea. This implementation is the most thorough one.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
All the macros are available in the libdrm that we depend on.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We already require libdrm 2.4.89 which provides the definition plus
guarding kernel UABI like that is generally a bad idea.
See previous commit for details why :-)
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The macro was available in libdrm for ages. Furthermore having a guard
like this is a very bad idea.
Building on an old server will result in a missing run-time functionality.
Since it's UABI one can use a local fallback, old kernels will return
-EINVAL and the fallback path will kick in.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With earlier commit the required version was bumped to 2.4.89, thus the
guards always evaluate to true.
Fixes: e4e3447603 ("Add RandR leases with modesetting driver support
[v6]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Make appveyor ignore builds for /travis.*/ and vice versa. If you're
only testing a Windows change, building for OSX and Linux too is a bit
rude.
Signed-off-by: Adam Jackson <ajax@redhat.com>
As per the protocol, the server should not return version greater than
the one supported by the client.
Add a spec quote and tweak the numbers accordingly.
Fixes: 5631382988 ("dri3: Add DRI3 extension")
Cc: Daniel Stone <daniels@collabora.com>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
As per the protocol, the server should not return version greater than
the one supported by the client.
Add a spec quote and tweak the numbers accordingly.
Fixes: 5c5c1b7798 ("present: Add Present extension")
Cc: Thierry Reding <treding@nvidia.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Everything is implemented to support protocol version 1.2. Make it
official.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This reverts commit 8c455db0eb.
Since xf86platformBus.h is only included when XSERVER_PLATFORM_BUS is
defined, and configure.ac only defines that on systems with udev, this
commit breaks the build on non-udev systems like Solaris.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Install and use xorgproto, and build with optimization as clang has
warnings that only work above -O0. Also expand the build matrix for both
Xcode 8.3 and 9.2. Both images are OSX 10.12 at the moment so this is
really just a way to test with clang 8 vs 9.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Stretch's Mesa is too far behind, and building Mesa to build xserver is
not the sort of problem we're trying to solve here. But our Travis
scripts run inside a docker image, and that image can be whatever, so
since I have to keep rawhide building anyway let's switch to that for
now. The dockerfile can be found at:
https://github.com/nwnk/xserver-travis
The $DISTRO part of the change is foreshadowing for the day we readd a
(probably sid-based) debian image; patches for other environments are
welcome.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Flagged by valgrind:
==13695== Conditional jump or move depends on uninitialised value(s)
==13695== at 0x22461C: RRNoticePropertyChange (rrproperty.c:150)
==13695== by 0x22461C: RRChangeOutputProperty (rrproperty.c:263)
==13695== by 0x222FC4: RROutputSetNonDesktop (rroutput.c:333)
==13695== by 0x22319C: RROutputCreate (rroutput.c:122)
==13695== by 0x1E1CE9: xf86RandR12CreateObjects12 (xf86RandR12.c:1734)
==13695== by 0x1E1CE9: xf86RandR12Init12 (xf86RandR12.c:2375)
==13695== by 0x1E1CE9: xf86RandR12Init (xf86RandR12.c:895)
==13695== by 0x1D469B: xf86CrtcScreenInit (xf86Crtc.c:778)
==13695== by 0xC095A54: RADEONScreenInit_KMS (radeon_kms.c:2436)
==13695== by 0x161444: AddGPUScreen (dispatch.c:3966)
==13695== by 0x1A3E46: InitOutput (xf86Init.c:763)
==13695== by 0x1654A7: dix_main (main.c:193)
==13695== by 0x7041A86: (below main) (libc-start.c:310)
==13695== Uninitialised value was created by a heap allocation
==13695== at 0x4C2CB8F: malloc (vg_replace_malloc.c:299)
==13695== by 0x223083: RROutputCreate (rroutput.c:83)
==13695== by 0x1E1CE9: xf86RandR12CreateObjects12 (xf86RandR12.c:1734)
==13695== by 0x1E1CE9: xf86RandR12Init12 (xf86RandR12.c:2375)
==13695== by 0x1E1CE9: xf86RandR12Init (xf86RandR12.c:895)
==13695== by 0x1D469B: xf86CrtcScreenInit (xf86Crtc.c:778)
==13695== by 0xC095A54: RADEONScreenInit_KMS (radeon_kms.c:2436)
==13695== by 0x161444: AddGPUScreen (dispatch.c:3966)
==13695== by 0x1A3E46: InitOutput (xf86Init.c:763)
==13695== by 0x1654A7: dix_main (main.c:193)
==13695== by 0x7041A86: (below main) (libc-start.c:310)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This field was defined as a Bool in the protocol headers and BOOL in
xcb. Bool is not a valid type for protocol fields. It is defined as
'int' by Xdefs.h, which we expect to be 32-bits on all machines.
The protocol headers and xcb have patches posted to switch to CARD32,
which is at least well defined.
This change adds the necessary byte swapping to handle other-endian
clients with this 32-bit field, and then changes the request
processing to compare all 32-bits against zero so that it works with
both new and old clients.
On MSB machines, Xlib will continue to work properly, but old XCB will
not interoperate with the X server (either before or after this patch).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Mihai Moldovan <ionic@ionic.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If dri1/2/3 are configured for auto-detection, libdrm is required, as well
as the corresponding proto. (Practically we will always have the
corresponding protos now, as they are part of xorgproto).
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Otherwise this is broken on cygwin:
rrlease.c: In function ‘ProcRRCreateLease’:
rrlease.c:305:9: error: implicit declaration of function ‘WriteFdToClient’ [-Werror=implicit-function-declaration]
if (WriteFdToClient(client, fd, TRUE) < 0) {
Signed-off-by: Adam Jackson <ajax@redhat.com>
Copied from Mesa with no modifications.
Gives us Geminilake and Kaby Lake platform names updates and
sync on Coffee Lake PCI IDs.
Cc: Timo Aaltonen <timo.aaltonen@canonical.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
They're part of the 1.20 RC1 ABI, and actually used by external drivers.
Also, requiring drivers which don't support the new functionality in
DRI3 1.2 to switch to the new interfaces seems unreasonable.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Enable DRI3 v1.2 now that all functions have been implemented and
that there is at least one backend implementing the driver hooks
(modesetting/glamor).
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Using modifier might allow the driver to use a more optimal format
(e.g. tiled/compressed). Let's try to use those if possible.
v2: Don't filter out multi-plane modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It relies on GBM >= 17.1.0 where we can import BO with multiple
planes and a format modifier (GBM_BO_IMPORT_FD_MODIFIER).
v2: Properly free fds in Xwayland
[Also add glamor_egl_ext.h to Makefile.am for distcheck's sake - ajax]
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add support for 'check_flip2' so that the present core can know
why it is impossible to flip in that scenario. The core can then
let know the client that the buffer format/modifier is suboptimal.
v2: No longer need to implement 'check_flip'
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Use most optimal buffer format (e.g. tiled/compressed) available
for scanout.
v2: Don't use multi-plane modifier to create scanout buffer
v3: Add flag to retrieve modifiers set from enabled CRTCs only
v4: Fix uses when GBM/EGL driver doesn't support modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Retrieve IN_FORMATS property from the plane. It gives the
allowed formats and modifiers for BO allocation.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
To make sure we also use the same primary plane and to avoid
mixing uses of two APIs, it is better to always use the atomic
modesetting API when possible.
v2: Don't use mode_output->connector_id
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allows the uses of CCS compressed or tiled pixmaps as BOs when
page-flipping.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In order to flip between compressed and uncompressed buffers -
something drmModePageFlip explicitly bans us from doing - we need
to port use the atomic modesetting API. It's only 'fake' atomic
though given we still commit for each CRTC separately and
CRTC and connector properties are not set with the atomic API.
The helper functions to retrieve DRM properties have been borrowed
from Weston.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add 'check_flip2' hook for driver to let know the core
about why flipping is not possible ('reason').
If it is because of unsupported buffer format/modifier,
a PresentCompleteNotify event is sent to the client with
the PresentCompleteModeSuboptimalCopy mode.
v2: Check for PresentOptionSuboptimal and check driver version
before using 'check_flip2'.
v3: Only require one of 'check_flip' or 'check_flip2' to be
implemented by the driver.
Refactor reasons list to enum
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Initial implementation for DRI3 v1.1. Only the DRI3 implementation
is there, backends need to implement the proper hooks.
Version is still set to 1.0 so clients shouldn't use the new
requests yet.
v2: Use depth/bpp instead of DRM formats in requests
v3: Remove DMA fence requests from v1.1
Add screen/drawable modifier sets
v4: Free array returned by 'get_drawable_modifiers()'
v5: Fix FD leak
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Both autotools and meson build systems had complicated logic around
what version of libdrm to require for various options. Remove that and
just check for a new enough version to support all of the options
which need libdrm.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
