The core protocol requires absolute values and it's a bit hard to get them if
we only have relative ones in the history. Switch the motion history to
absolute, and if we really need the relative values, we can probably generated
them from the abs. ones in the future.
Add each event to the master's MH as well as to the SDs. In the MD, store
min/max and the actual value. When retrieving the MH, rescale all coordinates
to the current coordinate range and only post those valuators that are
currently active on the device.
Since we can't predict how many valuators may be in a future SD attached to an
MD, we need to preallocate a history buffer that is large enough to keep
MAX_VALUATORS coordinates per event.
In addition, the history buffer needs to memorize the coordinate ranges at the
time, thus requiring MDs to store (min_val, max_val, current_val, time)
instead of (current_val, time) for each motion history entry.
This commit only fixes the allocation.
With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
master->last.valuator[x] for x > 2 is undefined. For all other devices, it's
the respective device's last valuators.
If the lastSlave did not have a valuator that is to be updated now, it is
reset to 0.
In GPE, we don't care about the device mode. Let's put the absolute values
into the deviceValuator event and worry about relative valuators on the other
side of the EQ.
Assuming master->last.valuators is in screen coords, SD's are always in device
coordinates.
1. If an event comes in, scale masters->last to the device, drop into device's
last->valuators.
2. Apply motion from the actual event
3. Scale back to screen coords, check if we may need to cross screens
4. Drop screen coords into master->last
5. Rescale to device coords, drop into deviceValuator event and SD->last
6. Drop screen coords into ev->root_x/y
Whoopee...
During GetPointerEvents (and others), we need to access the last coordinates
posted for this device from the driver (not as posted to the client!). Lastx/y
is ok if we only have two axes, but with more complex devices we also need to
transition between all other axes.
ABI break, recompile your input drivers.
Changed all the checks for x&y valuator so the more complex
calculation is only made once.
Added TODOs for valuator/axis 2 and above for future correct
handling of relative reporting of these.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
valuators[] is passed from the DDX. Depending on the device mode, update it
with either absolute values or relative values. The deviceValuator event sent
to the client will then contain the respective values.
This isn't quite finished yet, but at least it gives us the ability to use a
tablet as a normal mouse - with all the scaling in place.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
XQuartz was crashing because the Appkit thread was trying to GetXXXEvents while the Xserver thread was exiting.
This adds some more sanity checks and avoids that crash
(cherry picked from commit 34ec4bd6ac)
Add Prox events to the if-clauses with the other events
that are usually sent from the input devices.
Ensure that the event deliverers won't try to deliver
events of type '0' (some extended events doesn't have
an equivalent core-type)
Small modification by Peter Hutterer.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
The latter is used to increase the amount of allocated memory for the event
list. This will be needed for ClassesChangedEvents that can be of more or less
arbitrary size (larger than 32 anyway).
Rather than letting the DDX allocate the events, allocate them once in the DIX
and just pass it around when needed.
DDX should call GetEventList() to obtain this list and then pass it into
Get{Pointer|Keyboard}Events.
Relative events that generates both core and extention
events will have its axis cliped and screen changed by
miPointerSetPosition when the events are processed. For
absolute and non core-generating relative events the
axis must be clipped if we shouldn't end up completely
outside the defined ranges (if any).
Don't use a possitive value as a marker for if a max-value
is defined on the valuators. Use the existence of a valid
value range instead. This will also make it possible to
define arbitrary start and end-values for min and max as
long as min < max.
(first_valuator + num_valuators) must never be larger than the number of axes,
otherwise DIX freaks out. And from looking at libXI, anything larger than 6 is
wrong too.
(cherry picked from commit 9f6ae61ad1)
(first_valuator + num_valuators) must never be larger than the number of axes,
otherwise DIX freaks out. And from looking at libXI, anything larger than 6 is
wrong too.
Initialise num_events to 1, so we always send a proximity event, and then
optionally valuator events. Also make sure mieq can deal with valuator
events sent after proximity events.
We free the ValuatorClassRec quite regularly. If a SIGIO is handled while
we're swapping device classes, we can bring the server down when we try to
access lastx/lasty of the master device.
Turns out it's really really hard synchronising device state across multiple
duplicated events if they all share the same struct. So instead of doing so,
when the SD changes deep-copy all it's classes into the MD. The MD then has
the same capabilities, but the state can be set separately. This should fix
xkb, key state, repeat etc. problems.
Updating the device state allows us to remove the SwitchCoreKeyboard from the
event gathering, it's all done during event processing now.
If a slave device is attached to a master device, then we need to send a
mapping notify to the client.
Mapping notify needs to be sent if
- different slave device but on same master
- different master
This gives you funny behaviour with the ClientPointer. When a
MappingNotify is sent to the client, the client usually responds with a
GetKeyboardMapping. This will retrieve the ClientPointer's keyboard mapping,
regardless of which keyboard sent the last mapping notify request. So
depending on the CP setting, your keyboard may change layout in each app...
Each time a different slave device sends through a master, an
DeviceClassesChangedEvent is enqueued. When this event is processed, all
classes of the matching master device are changed, and the event is sent to
the clients.
Next time the master is queried, it thus shows the evclasses of the last slave
device. The original classes are stored in the devPrivates.
TODO: if all slave devices are removed, the master's original classes need to
be restored.
For pointers: don't try to set master->valuator fields if there is no master.
For keyboards: check if device is valid before trying to access the fields in
miPointerGetScreen (btw. this disables DGA events for floating keyboards).
Also stop the hideous number of ErrorFs if we request the paired device for a
floating dev.
Let the drivers only generate XI events and put those into the event queue.
When processing events, generate core events as needed. This fixes a number of
problems with XKB and the DIX in general.
The previous approach was to put core events and XI events as separate events
into the event queue. When being processed, the server had no knowledge of
them coming from the same device state change. Anything that would then change
the state of the device accordingly was in danger of changing it twice,
leading to some funny (i.e. not funny at all) results.
Emulating core events while processing XI events fixes this, there is only one
path that actually changes the device state now. Although we have to be
careful when replaying events from synced devices, otherwise we may lose
events.
Note: XI has precedence over core for passive grabs, but core events are
delivered to the client first.
This removes the wrapping added in 340911d724
Add keyc->postdown, which represents the key state as of the last mieqEnqueue
call, and use it when we need to know the posted state, instead of the
processed state (keyc->down). Add small functions to getevents.c to query and
modify key state in postdown and use them all through, eliminating previously
broken uses.
This reverts commit 6b055e5d97.
MPX relies on the XI event being delivered before the core event. Device grabs
break, amongst other things. I guess stuck modifiers need to be fixed some
other way.
Conflicts:
dix/getevents.c
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
Disclaimer: It's 6:51am. I'm trying to be as understandable as possible.
What was happening previously was this:
* Press Alt
* Extended event generated and processed: state is now Alt down once
* Core event generated
- keyboard switched: inherited state is Alt down once
- event processed: Alt down twice
* Release Alt
* Extended event generated and processed: state is now null
* Core event generated and processed: Alt down once
If we switch the order:
* Press Alt
* Core event generated:
- keyboard switched: inherited state is null
- event processed: Alt down once
* Extended event generated and processed: state is now Alt down once
* Release Alt
* Core event generated and processed: state is now null
* Extended event generated and processed: state is now null
When we carry over the previous state, it needs to be the _previous_ state
(state and modifiersPerKey), assuming that we're going to catch now-core
events for any of these. For example, if Ctrl is held down as we pivot, we
need to carry Ctrl over with a count of one, for which an extended + core
release will then clear. Carrying over the union of the previous state _and
the state resulting from the immediate action_ was what broke things.
For some reason, my keyboard has 25 mouse buttons, but zero valuators. This
causes GPE to blow up spectacularly, trying to get (and set) co-ordinates from
devices without valuators. For now, just prevent this from ever happening,
and whack a dirty great FIXME in.
Add RawDeviceEvent (pointers only for now).
This commit changes the event queue to use EventLists instead of xEvent
arrays. Only EQ is affected, event delivery still uses xEvent* (look for
comment in mieqProcessInputEvent).
RawDeviceEvents deliver driver information to the client, without clipping or
acceleration.
Make core events carry the same modifier state as the extended events, so
that holding down Ctrl on keyboard A and pressing Q on keyboard B won't
cause your app to quit.
The former <X11/extensions/XKBsrv.h> has been pulled into the server now as
include/xkbsrv.h, and the world updated to look for it in the new place,
since it made no sense to define server API in an extension header. Any
further work along this line will need to do similar things with XKBgeom.h
and friends.
Adding PointerKeyboardPairingChanged event
Correct error values for XWarpDevicePointer
dix: Adding device argument to SendMappingNotify
Adding spriteOwner flag to devices
