Changes since v2:
- Don't enable by default for debugoptimized builds
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Now that we can actually configure all of the directories xkb uses for
finding things, we can (finally, but only with meson) finally make it so
that with the correct meson configuration the Xserver will "just work"
without any additional changes to the installation prefix after
building.
For the people like me who have since scripted this part out of their
build process and forgotten about it, building and installing the X
server into a non-standard prefix has always required the following (or
something else that makes sure that X has a valid xkbcomp configuration)
commands be run right after doing the installation:
# start in root of prefix you installed X to
mkdir -pv share/X11/xkb/rules
ln -s /usr/share/X11/xkb/rules/evdev share/X11/xkb/rules/
rm -f bin/xkbcomp
ln -s /usr/bin/xkbcomp bin/
The one last piece of getting rid of this post-install junk is making
sure that we can control the directory that X uses for finding the
xkbcomp binary from meson so we can point it at the system provided
xkbcomp (/usr/bin/xkbcomp or similar). So, this patch adds a
configuration option for controlling this called xkb_bin_dir.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Without this, exa's gc swap macros trigger gcc's -Wdiscarded-qualifiers.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Setting glx_align64 to '' gives a null string in the arguments list passed
to the compiler. This is taken as an input filename, leading to:
"cc: error: : No such file or directory"
Instead, assign an empty list to glx_align64, which gets flattened to
nothing in the arguments list.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
We can check the version on an existing dependency, rather than spinning
up pkg-config again just to check the right version.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The extension was using the name CARD64 to represent 64-bit values,
with a #define from CARD64 to XSyncValue, a struct with a pair of
32-bit values representing a signed 64-bit value. This interfered
with protocol headers using CARD64 to try to actually store a
uint64_t. Now that stdint.h exists, let's just use that here,
instead.
v2: Fix alarm delta changes.
v3: Do the potentially overflowing math as uint and convert to int
afterward, out of C spec paranoia.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This allows making the master screen's pixmap_dirty_list entries
explicitly reflect that we're now tracking the root window instead of
the screen pixmap, in order to allow Present page flipping on master
outputs while there are active slave outputs.
Define HAS_DIRTYTRACKING_DRAWABLE_SRC for drivers to check, but leave
HAS_DIRTYTRACKING_ROTATION defined as well to make things slightly
easier for drivers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The epoll code depends on epoll_create1, not epoll_create.
Signed-off-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This appears to be essentially unused. The only known client-side
library for the SELinux extension is xcb, which does not look for the
name "Flask". The "SGI-GLX" alias for GLX appears to be a bit of
superstition at this point, NVIDIA's driver does not expose it and Mesa
does not check for it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
This needs a meson with PRs #1784, #1792 and #1794
Future work: remove conditionals which are always on, and simplify redundant
CYGDEBUG conditionals
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
I misspelled the enable flag, so DRI3 would throw BadImplementation
when you tried to start any GL app. Same as in
c7be7a688a, we also convert it to #ifdef
for consistency.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
C99 isn't enough on its own to get POSIX feature sets defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If we're linking with libbsd anyway, we might as well use the functions
it provides instead of compiling our replacements.
Signed-off-by: Peter Harris <pharris@opentext.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Set HAVE_REALLOCARRAY, HAVE_SIGACTION, HAVE_STRCASESTR, HAVE_STRLCAT,
HAVE_STRLCPY, HAVE_TIMINGSAFE_MEMCMP, and BUSFAULT.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Peter Harris <pharris@opentext.com>
Add options for DRI{1,2,3}
shmfence is required for DRI3
libdrm is required for any DRI{1,2,3}
Consolidate calls to dependency('libdrm')
Set WITH_LIBDRM when building with libdrm
v2:
Initialize libxserver_dri3 to []
Manually flatten libxserver, since meson doesn't (currently)
Use version_compare rather than circumloctions with dependency()
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
glibc would like to stop declaring major()/minor() macros in
<sys/types.h> because that header gets included absolutely everywhere
and unix device major/minor is perhaps usually not what's expected. Fair
enough. If one includes <sys/sysmacros.h> as well then glibc knows we
meant it and doesn't warn, so do that if it exists.
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The previous misc.h code went out of its way to allow swapping of
unaligned pointers to values. However, the members of an X
request/response are always naturally aligned within the struct, and
the buffers containing a request/response will also be aligned to at
least 8 bytes, so we can just drop it.
text data bss dec hex filename
before: 2215167 51552 132016 2398735 249a0f hw/xfree86/Xorg
after: 2214919 51552 132016 2398487 249917 hw/xfree86/Xorg
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The clever pointer tricks were actually not working, and we were doing
the byte-by-byte moves in general. By just doing the memcpy and
obvious byte swap code, we end up generating actual byte swap
instructions, thanks to optimizing compilers.
text data bss dec hex filename
before: 2240807 51552 132016 2424375 24fe37 hw/xfree86/Xorg
after: 2215167 51552 132016 2398735 249a0f hw/xfree86/Xorg
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
parser/scan.c was checking for #ifdef XCONFIGFILE and XCONFIGDIR and
defaulting to "xorg.conf", and "xorg.conf.d", so if you had changed
__XCONFIGFILE__ to anything else, it would have got out of sync.
Settle on the name without gratuitous underscores.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This dumps a ton of configure-time checks for system endian macros.
Given that we're marking the mixed-endian fixup code as cold, getting
at the system macros is a waste of code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
It had nothing left in it that was used but wasn't in dix-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The actual code was gone in 27819950e4,
but some checks remained.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
ajax deleted the evdev driver in the removal of fbdev and the linux
backend.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
None of this is actually wired up to anything, so we can also remove the
devPrivates from the DamageRec. The DamageExtRec is what would need
devPrivates for selinux labeling, in principle.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2:
- Require power-of-two bpp in ScreenInit
- Eliminate fbCreatePixmapBpp
v3
- Squash in the exa and glamor changes so we can remove pRotatedPixmap
in the same stroke.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is for glamor can support fd from DRM render node which is useful
for a render only DDX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Provide the function definition for systems that don't have it.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The input thread should generate events, not send them. Make it easier to
find the instances where it's doing so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This will be used by in-server features that need to react to property
changes. The first one will be _XWAYLAND_ALLOW_COMMITS.
Signed-off-by: Adam Jackson <ajax@redhat.com>
[Pekka: add commit message body]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A client which is attended while a grab is blocking execution of its
requests needs to be placed in the saved_ready_clients list so that it
will get scheduled once the grab terminates. Otherwise, if the client
never sends another request, there is no way for it to be placed in
the ready_clients list.
v2: Wrap comment above mark_client_saved_ready.
Remove test for OS_COMM_IGNORED which will always be true.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99333
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
I think it is possible that output could get queued to a client during
CloseDownClient. After it is removed from the pending queue, active
grabs are released, the client is awoken if sleeping and any work
queue entries related to the client are processed.
To fix this, move the call removing it from the output_pending chain
until after clientGone has been set and then check clientGone in
output_pending_mark.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1382444
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Special case for the systemd-logind case in xfree86: when we're vt-switched
away and a device is plugged in, we get a paused fd from logind. Since we
can't probe the device or do anything with it, we store that device in the
xfree86 and handle it later when we vt-switch back. The device is not added to
inputInfo.devices until that time.
When the device is removed while still vt-switched away, the the config system
never notifies the DDX. It only runs through inputInfo.devices and our device
was never added to that.
When a device is plugged in, removed, and plugged in again while vt-switched
away, we have two entries in the xfree86-specific list that refer to the same
device node, both pending for addition later. On VT switch back, the first one
(the already removed one) will be added successfully, the second one (the
still plugged-in one) fails. Since the fd is correct, the device works until
it is removed again. The removed devices' config_info (i.e. the syspath)
doesn't match the actual device we addded tough (the input number increases
with each plug), it doesn't get removed, the fd remains open and we lose track
of the fd count. Plugging the device in again leads to a dead device.
Fix this by adding a call to notify the DDX to purge any remainders of devices
with the given config_info, that's the only identifiable bit we have at this
point.
https://bugs.freedesktop.org/show_bug.cgi?id=97928
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add a valuator mask setter for setting absolute coordinate combined
with unaccelerated motion deltas. This will later be used by Xwayland
to combine a wl_pointer.motion() event with the unaccelerated delta of
a wp_relative_pointer.relative_motion() event.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This function will be called when a pointer is grabbed non-root window
set as the 'confineTo'. This will enable the ddx to handle the
confinement their own way.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This new vfunc will be called, if set, after a client has issued a
WarpPointer request. This is necessary for implementing pointer warp
emulation in Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
