Let configure --enable/disable-aiglx control building of AIGLX for all DDXs. Currently
we can't use --enable/disable-aiglx to control if Xwin DDX is built with AIGLX enabled,
as at the moment it's forced off if we aren't building the X.Org DDX DRI or DRI2 loader
Rearrange things a bit, introducing a new automake conditional, AIGLX_DRI_LOADER to
specifically indicate if the X.Org DDX DRI/DRI2 loader convenience library should be
built, and replace the previous X.Org DDX-specific uses of the AIGLX conditional with that
As before, AIGLX_DRI_LOADER is only enabled if --enable-glx, --enable-aiglx and at least one
of --enable-dri or --enable-dri2 are enabled
This allows the general conditional AIGLX to control if AIGLX is built for the XWin DDX as
well
The C #define AIGLX set by AC_DEFINE(AIGLX) seems to be obsolete, I can't find anything
which checks it
Updated for ajax's "glx: Make --disable-dri not disable AIGLX" patch, which allows DRI2
to be enabled independently of DRI1
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
When the smart scheduler is enabled, the VT ioctls (particularly
VT_WAITACTIVE) can be interrupted by the smart scheduler's SIGALRMs.
Previously, this caused the server to immediately continue on to
ScreenInit, almost certainly causing a crash or failure because the X
server that owned the VT hadn't finished cleaning up. As of commit
7ee965a300, it causes a FatalError
instead.
Retrying the ioctl as long as it fails with errno == EINTR fixes the
problem and allows server regenerations to trigger VT switches that
actually succeed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously, we weren't always waiting the full three seconds. This should
be better, but is still sub-optimal. We really want to start processing
these once a WM has been started.
http://xquartz.macosforge.org/trac/ticket/416
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
If the velocity is 0, skip the remainder.
If we're not in range, skip the remainder.
No functional change.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
i → used_offset
iveloc → initial_velocity
res → result
vdiff → velocity_diff
vfac → velocity_factor
tmp → tracker_velocity
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
We can modify fdx/fdy in-place rather than requiring dx/dy as well. And the
decision to soften can be made in the caller (unless decided by the velocity
state).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
And res to result.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Don't confuse users with a return type of short, that's even less indicative
that it returns 0/non-0 than "int".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
This is the best explanation I can come up with, but it seems to hold true
for my example values.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
The two directions returned by this calculation are always the two boundary
conditions. Since we don't do quadrants but octants, the flagged ones are
45° each. e.g. an angle of 35° flags E and NE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use enums for the direction bits, not hardcoded bitfield values that are
added up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
resource.c: In function 'AddResource':
resource.c:493:3: warning: format '%lx' expects type 'long unsigned int',
but argument 3 has type 'RESTYPE'
RESTYPE is uint32_t, not long.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The few features from the glib test suite we used can be replaced with
assert and printf. This patch is a simple replacement for these two
g_assert → assert
g_test_message → printf
g_test_init is removed and so is g_test_bug_base. g_test_run replaced with a
simple return 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Introduced in 6a5bf15fa9
Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Conditional jump or move depends on uninitialised value(s)
at 0x4357A1: GetEventMask (events.c:454)
by 0x43B9E8: DeliverEventsToWindow (events.c:2029)
by 0x4E0C59: SendEventToAllWindows (exevents.c:2125)
by 0x4E8301: XISendDeviceHierarchyEvent (xichangehierarchy.c:118)
by 0x426F99: DisableDevice (devices.c:507)
by 0x46BF72: xf86Wakeup (xf86Events.c:457)
by 0x432ABA: WakeupHandler (dixutils.c:419)
by 0x45B708: WaitForSomething (WaitFor.c:235)
by 0x42E8D9: Dispatch (dispatch.c:367)
by 0x422DC9: main (main.c:287)
Uninitialised value was created by a stack allocation
at 0x4E8190: XISendDeviceHierarchyEvent (xichangehierarchy.c:61)
Conditional jump or move depends on uninitialised value(s)
at 0x43BB78: DeliverEventsToWindow (events.c:2010)
by 0x4DDEEA: FindInterestedChildren (exevents.c:2103)
by 0x4DDEFF: FindInterestedChildren (exevents.c:2104)
by 0x4DDEFF: FindInterestedChildren (exevents.c:2104)
by 0x4DDEFF: FindInterestedChildren (exevents.c:2104)
by 0x4DDEFF: FindInterestedChildren (exevents.c:2104)
by 0x4E0C6F: SendEventToAllWindows (exevents.c:2127)
by 0x4E8301: XISendDeviceHierarchyEvent (xichangehierarchy.c:118)
by 0x426F99: DisableDevice (devices.c:507)
by 0x46BF72: xf86Wakeup (xf86Events.c:457)
by 0x432ABA: WakeupHandler (dixutils.c:419)
by 0x45B708: WaitForSomething (WaitFor.c:235)
Uninitialised value was created by a stack allocation
at 0x4E8190: XISendDeviceHierarchyEvent (xichangehierarchy.c:61)
Set the type of dummyDev to SLAVE. The jump listed above comes from a check
to IsMaster() in GetEventMask() that would then set the
XIAllMasterDevices mask.
Hierarchy events can only be set for XIAllDevices so the above IsMaster()
check had no effect and the device type doesn't really matter anyway beyond
shuting up valgrind.
Also initialize dummyDev to 0 to ease future debugging.
X.Org Bug 36120 <http://bugs.freedesktop.org/show_bug.cgi?id=36120>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
commit 678f5396c9 only fixed the
initialization, not the copy. After a slave device change, the valuator
were out of alignment again.
X.Org Bug 36119 <http://bugs.freedesktop.org/show_bug.cgi?id=36119>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Otherwise the garbage you return could well be numerically identical to
one of the swap type tokens, and apps which rely on us to tell the truth
would be in trouble.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
GLX pixmaps take a reference on the underlying pixmap; X and GLX pixmap
IDs can be destroyed in either order with no error. Only windows need
to be tracked under both XIDs.
Fixes piglit/glx-pixmap-life.
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
update_dri2_drawable_buffers() doesn't modify out_count, so pass it
by value.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Don't access invalid memory if calloc() fails to allocate the buffers
array.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>