This reverts commit fdb081b430
"dri2: Deal with input-only windows by using WindowDrawable()"
and replaces it as follows:
Reject the creation of a DRI2 drawable for UNDRAWABLE_WINDOW (input-only
windows) and DRAWABLE_BUFFER (whatever those are) drawables and only look up
privates for the supported drawable types.
The rest of the the code can continue pretending there's only output windows
and pixmaps, which are the only kinds of drawables relevant for DRI2.
Fixes server crash with GLX compositing managers such as compiz or kwin, due
to looking up a window private for a pixmap and getting a bogus pointer.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DRI2WaitSBC() didn't block if requested targetSBC wasn't yet reached.
Instead it returned a xreply with uninitialized junk return values, then
blocked the connection until targetSBC was reached.
Therefore the client didn't block, but continued with bogus return
values from glXWaitForSbcOML.
This patch fixes the problem by implementing DRI2WaitSBC similar
to the clean and proven DRI2WaitMSC implementation.
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Some drivers use DRI protocol but implement their own kernel rendering
manager. For these drivers, libdrm becomes useless. --disable-libdrm
configure parameter can be used to disable libdrm support in dri2.
To provide ABI/API compatibility for libdrm based drivers, libdrm call
is wrapped in ifdef.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
TryClientEvents already did this; this commit just moves the assignment
one level down so that no event source has to worry about sequence
numbers.
...No event source, that is, except XKB, which inexplicably calls
WriteToClient directly for several events.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This matches the test in TryClientEvents, and is a superset of tests
done by the callers of these functions. The consequence of forgetting
these tests is a server crash, so they're always desirable. In my
opinion, it's better to not require the callers to remember to do these
checks.
For callers that don't do very much work before calling WriteToClient or
WriteEventsToClient, I've removed the redundant checks.
hw/xquartz/xpr/appledri.c has an interesting case: While its check for
"client == NULL" appears redundant with the test in WriteEventsToClient,
it dereferences client to get the sequence number.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27497
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If driver fails to allocate memory for dri2 buffer server would crash
in send_buffers_reply.
Solution is to handle the allocation failure and return BadAlloc to
client.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This lets the DRI2 clients rely on the server to notify them when they
need to get new buffers. Without this, OpenGL clients poll the server
in glViewport() which can be a performance problems and also isn't
completely correct behaviour.
We bump the DRI2 protocol minor to indicate the availability of the
event, which the DRI2 clients can use to avoid polling. This speeds up
various piglit and oglc test cases as well as real applications.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Some pixmaps (window pixmaps and scratch pixmaps) don't have the
drawable->id set and thus DRI2 gets confused when using that field
for looking up the DRI2 drawable. Go back to using privates for getting
at the DRI2 drawable from a DrawablePtr. We need to keep the resource
tracking in place so we can remove the DRI2 drawable when the X resource
it was created for goes away. Additionally, we also now track the DRI2
drawable using a client XID so we can reclaim the DRI2 drawable even if
the client goes before the drawable and doesn't destroy the DRI2 drawable.
Tested-by: Owen W. Taylor <otaylor@fishsoup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
The main motivation here is to have the resource system clean up the
DRI2 drawable automatically so glx doesn't have to. Right now, the
glx drawable resource must be destroyed before the X drawable, so that
calling DRI2DestroyDrawable doesn't crash. By making the DRI2
drawable a resource, GLX doesn't have to worry about that and the
resource destruction order becomes irrelevant.
https://bugs.freedesktop.org/show_bug.cgi?id=26394
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
We need to throttle swaps here in addition to when the context is made
current to avoid causing problems with clients that just swap.
Throttling here also ensures our swaps get ordered as long as we block
the client occasionally.
Reported-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Update our supported DRI2 protocol version as each driver does
DRI2ScreenInit, since depending on available kernel features, each DDX
may support different callbacks and therefore protocol.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We weren't initialising the drawable in the event structure so the
client side DRI2WireToEvent used for translating the event into a GLX
event wouldn't be able to lookup up the corresponding GLXDrawable before
passing the event on.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows clients to easily check for swap completion status in their
main loop.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Support the new DRI2 2.2 protocol requests: DRI2SwapBuffers, DRI2GetMSC,
DRI2WaitMSC, DRI2WaitSBC and DRI2SwapInterval.
These requests allow the server to support the SGI_video_sync,
SGI_swap_interval, and OML_sync_control GLX extensions if DDX support is
present. The new DDX APIs are documented in dri2.h.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Calls RegisterResourceName to record the type name for
use by X-Resource, XACE/SELinux/XTsol, and DTrace.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Make sure to check return value before setting bitmask flags.
For most calls, just fails to init the extension. Since Xinput
already calls FatalError() on initialization failure, so does
failure to allocate Xinput's resource type.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
Referencing a screen through a drawable only requires GetAttr access.
Treat dri2 drawables as child windows (Add/Remove access).
Treat getting buffers as intent to read/write the drawable.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
These old interfaces are no longer supported by the server, removing them
requires bumping the video driver ABI. Note that this is not guaranteed to
be the last change in ABI version 6.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The old DRI2 buffer allocation API wasn't great, but there's no reason to
make the server stop working with those drivers. This patch has the
X server adapting to the API provided by the driver, using the new API where
available and falling back to the old API as necessary. A warning will be
placed in the log file when the old API is in use.
Signed-off-by: Keith Packard <keithp@keithp.com>
This change implements the protocol for DRI2GetBuffersWithFormat, but
the bulk of the differences are the changes to the extension / driver
interface to make this function work. The old CreateBuffers and
DeleteBuffers routines are replaced with CreateBuffer and DeleteBuffer
(both singular).
This allows drivers to allocate buffers for a drawable one at a time.
As a result, 3D drivers can now allocate the (fake) front-buffer for a
window only when it is needed. Since 3D drivers only ask for the
front-buffer on demand, the real front-buffer is always created. This
allows CopyRegion impelemenations of SwapBuffers to continue working.
As with previous version of this code, if the client asks for the
front-buffer for a window, we instead give it the fake front-buffer.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@redhat.com>
This prevents building an older server with a new dri2proto.h from
resulting in a DRI2 extension module that lies about the version it
supports.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Get rid of glcontextmodes.[ch] from build, rename __GlcontextModes to
__GLXcontext. Drop all #includes of glcontextmodes.h and glcore.h.
Drop the DRI context modes extension.
Add protocol code to DRI2 module and load DRI2 extension by default.
