The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This reverts commit 1564c82417.
The drivers used the top bits of the usage_hint to store driver
private flags (intel, radeon, nouveau).
With EXA we need to get at this data so if we migrate the pixmap we
can create the correct type of pixmap in the driver, however this
commit truncates the usage_hint into 8-bit class and loses all the
good stuff.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This was leftover from some older ways of building dmx/scale docbook.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
These functions no longer go through the screen vtable, so remove
them and fix up the various wrappers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
This converts all the remaining 1->num loops to the macro,
this removes nearly all the panoramiXNumScreens usage in
loops, and is a step to replacing it.
v2: move some from the other patch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This just uses the FOR_NSCREENS macro instead.
v2: remove some of the 1->x loops.
v3: drop the 1->0 loop, will rework later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The class field was unused for pixmaps, and we don't have enough classes
to justify a whole uint32 anyway.
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Instead of listing one of the doxygen output files and depending on
sequential execution to ensure that the other files were present
before make checked for them, create explicit dependencies so that
make will not check for the additional files until after doxygen has
been run.
This allows parallel make to work correctly in this directory.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
The paths in doxygen.conf assumed that srcdir=builddir and broke
otherwise. Use autoconf to fill in the paths to the srcdir so that the
files can be found when users have a separate build directory (as with
distcheck).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
glxvendor.c: In function ‘__glXVForwardPipe0WithReply’:
glxvendor.c:205:10: warning: ‘be_buf’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxvendor.c: In function ‘__glXVForwardAllWithReply’:
glxvendor.c:284:10: warning: ‘be_buf’ may be used uninitialized in this function
glxvendor.c:285:10: warning: ‘be_buf_size’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxsingle.c: In function ‘__glXForwardPipe0WithReply’:
glxsingle.c:218:10: warning: ‘be_buf’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxsingle.c: In function ‘__glXForwardAllWithReply’:
glxsingle.c:300:10: warning: ‘be_buf’ may be used uninitialized in this function
glxsingle.c:301:10: warning: ‘be_buf_size’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxsingle.c: In function ‘__glXDisp_ReadPixels’:
glxsingle.c:760:11: warning: ‘buf’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
render2swap.c:264:13: warning: ‘swapArray’ defined but not used
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘CreateGLXPixmap’:
glxcmds.c:1663:20: warning: comparison between pointer and integer
glxcmds.c:1663:38: warning: comparison between pointer and integer
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘CreateGLXPixmap’:
glxcmds.c:1641:22: warning: ‘pGlxScreen’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘CreateContext.clone.6’:
glxcmds.c:105:19: warning: ‘be_fbconfigId’ may be used uninitialized in this function
glxcmds.c:104:14: warning: ‘be_vid’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘__glXGetDrawableAttributes’:
glxcmds.c:3295:8: warning: ‘screen’ may be used uninitialized in this function
glxcmds.c:3298:8: warning: ‘attribs_size’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘__glXChangeDrawableAttributes’:
glxcmds.c:3464:8: warning: ‘screen’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
xdmxconfig.c: In function ‘dmxConfigCanvasDraw’:
xdmxconfig.c:299:23: warning: ‘maxHeight’ may be used uninitialized in this function
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: In function ‘dmxBlockHandler’:
dmxinputinit.c:610:44: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxWakeupHandler’:
dmxinputinit.c:637:41: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxInputInit’:
dmxinputinit.c:1041:36: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: At top level:
dmxinputinit.c:135:29: warning: ‘DMXCommonOth’ defined but not used
DMXCommonOth is actually mentioned in a #if 0 block, so delete it and
the block that references it. If anyone needs it, git remembers.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxgc.c: In function ‘dmxChangeClip’:
dmxgc.c:386:5: warning: case label value exceeds maximum value for type
dmxgc.c:387:5: warning: case label value exceeds maximum value for type
dmxgc.c:388:5: warning: case label value exceeds maximum value for type
dmxgc.c:389:5: warning: case label value exceeds maximum value for type
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Dear gcc: I do not care about machines where sizeof(void *) <
sizeof(int), and neither should you.
dmxextension.c: In function ‘dmxBECreateResources’:
dmxextension.c:858:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderPict’:
dmxextension.c:1062:29: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderGlyph’:
dmxextension.c:1084:35: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxAttachScreen’:
dmxextension.c:1277:8: warning: cast to pointer from integer of different size
dmxextension.c:1286:34: warning: cast to pointer from integer of different size
dmxextension.c:1292:35: warning: cast to pointer from integer of different size
dmxextension.c: In function ‘dmxBEDestroyResources’:
dmxextension.c:1456:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxDetachScreen’:
dmxextension.c:1599:8: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Create a manpages.am makefile snippet in the root dir.
Each man page makefile includes manpages.am.
Now all man pages in xserver are generated the same way
using the same method as all of other xorg modules.
All ".man.pre" files in git are ".man" now.
Links are no longer created between different file types.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use standard directory and makefile.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
render2.c: In function ‘__glXDisp_Map2d’:
render2.c:127: warning: ‘u1’ may be used uninitialized in this function
render2.c: In function ‘__glXDisp_Map1d’:
render2.c:90: warning: ‘u1’ may be used uninitialized in this function
Remove unnecessary test, and change memcpy to memmove as all users were
doing overlapping copies.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use the util-macros AM Conditionals to control generation of developers
documents. This is used throughout xorg modules.
The doxygen generated docs are now also managed by --enable-devel-docs.
Remove --enable-builddocs as this was last use for BUILDDOCS
*** From the RELEASE NOTES ***
New configure options for documentation in modules
--------------------------------------------------
As many more modules now contain documentation to be converted from DocBook XML to text,
HTML, PostScript, and/or PDF formats, new standard options have been added to the configure
macros to control the build of these in the modules.
--with-xmlto=yes|no
Enables or disables use of the xmlto [https://fedorahosted.org/
xmlto/] command to translate DocBook XML to other formats.
All DocBook XML conversions require use of this command.
--with-fop=yes|no
Enables or disables use of the Apache fop [http://
xmlgraphics.apache.org/fop/] command to translate DocBook
XML to PostScript and PDF formats.
--enable-docs=yes|no
Enables or disables the build and installation of all
documentation except traditional man pages or those covered
by the --enable-devel-docs and --enable-specs options.
--enable-devel-docs=yes|no
Enables or disables the build and installation of documentation
for developers of the X.Org software modules.
--enable-specs=yes|no
Enables or disables the build and installation of the formal
specification documents for protocols and APIs.
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The makefile can be simplyfied as Automake handle this automatically.
All directories in SUBDIRS are visited for dist purposes.
www.gnu.org/software/automake/manual/automake.html#SUBDIRS-vs-DIST_005fSUBDIRS
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been prepared with the following Coccinelle semantic patch:
@@
expression a, b, c, d;
identifier r;
type t;
@@
-r = (t) SecurityLookupIDByClass(a, b, c, d);
+dixLookupResourceByClass((pointer*) &r, b, c, a, d);
The only occurrence not matching directly was processed after separating
declaration of pXinDraw and call to SecurityLookupIDByClass().
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
These occurrences are a bit harder to catch through a semantic patch,
so process them “manually”.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
This patch has been prepared with the following Coccinelle semantic patch:
@@
expression a, b, c, d;
identifier r;
@@
-r = SecurityLookupIDByType(a, b, c, d);
+dixLookupResourceByType((pointer*) &r, b, c, a, d);
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
These occurrences are a bit harder to catch through a semantic patch,
so process them “manually”.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
If glxproxy needs symbols which aren't pulled in by dmx itself, glxproxy
fails to link because of undefined references.
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
screenInfo.numScreens is not a valid screen number, they go from 0 to
numScreens - 1.
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Eliminate the unused dither field, move filter and stateChanges into the
bitfield, and reorder elements to pack holes on LP64.
sizeof(PictureRec) ILP32 LP64
before: 84 152
after: 72 120
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
A different approach which requires less variables setting
and internal knowledge of the reused code.
Changing from "install" to "not install" is very easy now.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Relative paths don't always work in distcheck when srcdir not = builddir
include $(top_srcdir)/doc/xml/xmlrules.in
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E)
- free(E);
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We have per-axis mode now. For those bits that still need it (XI 1.x),
assume that the first axis holds the device's mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Relative is defined as 0, so change the condition to be more obvious.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Some functions had to be moved around due some missing static definitions.
Another minor clean up like inexistent function declarations and etc were made
also.
Part of this patch was cooked using:
sed -i -e '/static DISPATCH_PROC*.*;/d' `git ls-files`
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Nothing in dmx uses these names any more, and it builds cleanly without
trying to undef them.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Kristian made equivalent edits to the reference GLX implementation in
2006, with commit 2d2d38d17c.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Kristian deleted this API from the rest of the server in 2007, in commit
7d74690536.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This makes hw/dmx/glxProxy/unpack.h more closely resemble glx/unpack.h,
and fixes the "unused variable 'swapEnd'" and "unused variable 'swapPC'"
warnings.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Every screen region consists of a single rectangle, so initializing a
stack-allocated region for each screen on-demand does no heap allocation
and is fast.
This eliminates a MAXSCREENS-sized array.
The REGION_UNINIT calls are no-ops since no boxes are actually allocated
for a single-rectangle region, but it seemed wiser to include them.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Propagate the shape kind all the way to SetShape to avoid performing non-input
operations such as revalidating the tree and generating exposures when only
changing a window's input shape.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Acked-by: Aaron Plattner<aplattner@nvidia.com>
Reviewed-by: Daniel Stone<daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Daniel Stone deleted the API for these in 2006, in commit
96e32805d1.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Eric Anholt made the corresponding fix in glx/render2swap.c in commit
49d38ab232.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Mikhail fixed the corresponding Xallocs, but missed these uses of Xfree
in commit 3f3ff971ec.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only the markup/formatting is changed - the contents should still
be wildly out of date for now.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Tested-by: Gaetan Nadon <memsize@videotron.ca>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Previously the callers were only setting errorValue on Success, when
it's ignored, and leaving it alone on failure, when it's sent to the
client.
Since SetFontPath takes the ClientPtr, let it set client->errorValue
instead of letting the callers continue to get it wrong.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Same goes for VERIFY_ALPHA, VERIFY_XIN_PICTURE, and VERIFY_XIN_ALPHA.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
dmx.txt and scaled.txt are generated from SGML, so they probably never
should have been in version control in the first place.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
Add $(AM_V_GEN) for sed-based rules so they appear as expected with
automake silent rules, and $(AM_V_at) to completely hide cp/ln/rm
commands which are not prone to fail.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
We now use libtool, which calls AC_PROG_SED and sets SED as the path to
a fully-functional 'sed' (which may also be called 'gsed' if GNU sed is
installed alongside a proprietary version). Therefore we should respect
the value of SED so we are sure to use the correct one.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Add $(AM_V_at) to all relink make targets to silence them when automake
silent rules are in use.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
On Cygwin and MinGW, executables use the .exe suffix. Autoconf and
automake set EXEEXT on these platforms, and leave it empty on others
where no suffix is used. $(EXEEXT) must be appended to executable names
in custom rules for portability:
http://www.gnu.org/software/automake/manual/html_node/EXEEXT.html
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
The DMX Xdmx server and xdmx client cannot both be installed on
case-insensitive file systems. The client is undocumented and
so renaming it is the best option.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
5b9a52be7e changed the server to use OsAbort()
instead of abort(). xinput in dmx is a client program though and fails to
link if it tries to use OsAbort(). Switch it back to using abort().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The problem fixed by this patch can be reproduced on Linux with the
following steps.
- Access NULL pointer intentionally in ProcessOtherEvent on key press.
- Instead of saving core dump to a file, write it into a pipe.
echo "|/usr/sbin/my-core-dumper" > /proc/sys/kernel/core_pattern
- Dump the core by pressing a key.
While the core is being dumped into the pipe, the smart schedule timer
will cause a pending SIGALRM. Linux kernel stops writing data to the
pipe when there are pending signals. This causes the core dump to be
truncated. On my system I'm expecting a 6 MB dump but the size will be
60 kB instead. The problem is solved if we block the SIGALRM caused by
expired smart schedule timer.
I haven't been able to reproduce this problem in the following cases.
- Save core dump to a file instead of a pipe.
- kill -SEGV `pidof Xorg`
- Press a key to dump core while gdb is attached to Xorg.
- Give option -dumbSched to Xorg.
Also note that the fix works only when NoTrapSignals has the default
value FALSE. The problem can still be reproduced if error signals
aren't trapped. In addition to pending SIGALRM, there is a similar
problem with pending SIGIO from the keyboard driver during core dump.
Signed-off-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only DDX currently using hotplugging is the xfree86 one and it looks
like it'll stay that way for a bit. Move the initialization to the DDX,
since Xephyr, Xnest, and friends don't need HAL or udev notifications.
Add CloseInput (counterpart to InitInput) to be able to clean up the config
initialization from the DDX as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
XORG_WITH_DOXYGEN provides additional functions like a configure
option which allow platform builders to control the usage of
the doxygen program.
This is a requirement from platforms that do not have such doc tool.
A platform with a back level doxygen may use --without-doxygen
to get the rest of the documentation built.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Calls RegisterResourceName to record the type name for
use by X-Resource, XACE/SELinux/XTsol, and DTrace.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Make sure to check return value before setting bitmask flags.
For most calls, just fails to init the extension. Since Xinput
already calls FatalError() on initialization failure, so does
failure to allocate Xinput's resource type.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Correctly allow for excess length of DMXGetScreenAttributes reply
over standard 32 byte reply in addition to the displayName string
when computing the length of reply
http://bugs.freedesktop.org/show_bug.cgi?id=24685
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Ok, dmx docs are driving me slightly nuts. We probably shouldn't
include the built versions in the tarball, but we do, so this is an
attempt to make that work by having both the 'all' and 'dist' targets
depends on the doxygen output.
Signed-off-by: Keith Packard <keithp@keithp.com>
Don't really know why this section was disabled, but without it,
certain pPicture resources do not get free'd until later in the
FreeClientResources() process after the screen has been free'd -
resulting in seg fault.
With this patch, all resources normally free'd using vanilla X are
now also being freed correctly by Xdmx.
https://bugs.freedesktop.org/show_bug.cgi?id=24576
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These can be recreated by simply running 'doxygen doxygen.conf' in
hw/dmx/doc. Some of the files do not exist anymore, these have been removed.
Some other files have a different naming scheme.
Doxygen warnings about missing links fixed, two warnings remain:
/home/whot/xorg/xserver/hw/dmx/dmxwindow.c:142: Warning: explicit link
request to 'dmxConfigureRootWindow' could not be resolved
/home/whot/xorg/xserver/hw/dmx/dmxwindow.c:119: Warning: explicit link
request to 'dmxConfigureScreenWindow()' could not be resolved
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Drop the dmx-specific defines, there's no reason to have separate ones
considering they're about as hardcoded as the default rules anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XWin uses ddxBeforeReset, which is called in DIX. Other DDXs need to
define these in order to avoid an undefined symbol error at link time
when building alongside XWin. Xnest and Xvfb already provide empty stubs;
this does the same for Xdmx and the platform-neutral KDrive servers.
Also add a prototype to avoid a warning in all DDXs.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch undefines MITSHM for dmx - we don't support the required
screen->ModifyPixmapHeaders. All undefines are moved from dmx-config to
miinitext.c, where they belong.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes input in dmx, the pointer appears at the right positions to the
clients now.
Also mark the spot where we pass in the button state as valuator to GPE
with a FIXME. (??)
Tested-by: Kevin Martin
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
Fixes build with newer dmx header files that have been split between dmx.h
and dmxext.h. _DMX_SERVER_ is no longer needed with the split headers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Approach taken is inefficient, it converts the xkb symbol table to a core
symbol table first and then extracts the keycode from there.
Consider this a todo for a rainy afternoon when the beer fridge demands
emptying.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently only None labels are passed in, in the future these labels should
be whatever the respective buttions/axes are.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Changes MakeAtom to take a const char * and NameForAtom to return them,
since many callers pass pointers to constant strings stored in read-only
ELF sections. Updates in-tree callers as necessary to clear const
mismatch warnings introduced by this change.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have modmap (in the exact same format!) in XKB, so just use
that all the time, instead of duplicating the information.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There were a few spots left in the source that were using the
--with-mesa-source defined headers or the now removed $(top_srcdir)/GL
directory. These aren't needed anymore as all the necessary source for
GLX is in $(top_srcdir)/glx.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Using GL for the PKG_CHECK_MODULES identifier multiple times means only
the first call will actually be used. Later calls will be skipped due to
GL_CFLAGS and GL_LIBS already being set. This changes DRI to using a
different identifier and DMX to just reusing GL_CFLAGS.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
According to the press release:
Previous SGI contributions to the free and open source community
are now available under the new license. These contributions
include the SGI® OpenGL® Sample Implementation, the GLX™ API and
other GLX extensions.
[...]
"SGI has been one of the most ardent commercial supporters of free
and open source software, so it was important to us that we continue
to support the free software development community by releasing our
earlier OpenGL-related contributions under this new license," said
Steve Neuner, director of Linux, SGI. "This license ensures that all
existing user communities will benefit, and their work can proceed
unimpeded. Both Mesa and the X.org Project can continue to utilize
this code in free software distributions of GNU/Linux. Now more than
ever, software previously released by SGI under earlier GLX and SGI
Free Software License B is free."
"The GLX API" is here read to include the original GLX source release
from:
http://www.sgi.com/products/software/opensource/glx/download.html
ftp://ftp.sgi.com/sgi/opengl/glx/glx1_2.1.tgz
which includes glxext.c as included in XFree86, from which our copies
in glx/ and hw/dmx/glxProxy/ are derived.
Under the terms of version 1.1, "once Covered Code has been published
under a particular version of the License, Recipient may, for the
duration of the License, continue to use it under the terms of that
version, or choose to use such Covered Code under the terms of any
subsequent version published by SGI."
FreeB 2.0 license refers to "dates of first publication". They are here
taken to be 1991-2000, as noted in the original license text:
** Original Code. The Original Code is: OpenGL Sample Implementation,
** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
** Copyright in any portions created by third parties is as indicated
** elsewhere herein. All Rights Reserved.
Official FreeB 2.0 text:
http://oss.sgi.com/projects/FreeB/SGIFreeSWLicB.2.0.pdf
As always, this code has not been tested for conformance with the OpenGL
specification. OpenGL conformance testing is available from
http://khronos.org/ and is required for use of the OpenGL logo in
product advertising and promotion.
This extension provided bug-compatibility with pre-X11R6, but has been
stubbed out in our server since 2006 to return BadRequest when you actually
asked for it.