Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous code would always skip the last valuator due to a wrong
upper boundary in the loop. last_valuator is the index of the last set
valuator - which also means it must be initialized to -1, not 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some files (notably those merged with MPX before XI2 came along) didn't use
a 'xi' prefix. This patch changes all of them to meaningful names.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If SetClientPointer fails, the only reason may be that the device is not a
pointer or that the device is an SD. Return BadDevice instead of BadAccess.
(BadAccess is a leftover from the early times of the ClientPointer
implementation when only one client was allowed to set it).
If the window parameter doesn't name a valid window or client, return
BadWindow.
Finally, allow both master keyboards and master pointers as deviceid.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was quite old code and can be streamlined a bit. The new code is
essentially the same as in ProcXISetClientPointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Swapping the mask_len and then advancing the pointer by the swapped length
is just a bad idea.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The maximum number of bytes is calculated by the mask len, and the mask len
is always in 4-byte units. XI2MASKSIZE however is in bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
zero-length masks are supposed to clear the device's mask.
ProcXISelectEvents passes these masks through directly, so we need to clear
the bits here if such a mask is supplied.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The data is already swapped before, so we just post it to the client as-is,
without attempting to swap it again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
inputstr includes XI2proto.h for the sole purpose of XI_LASTEVENT.
However, using XI_LASTEVENT in the server is prone to errors, if the server
is recompiled against a newer version of the protocol it would bump this
variable and associates bits, including potential ABI.
This patch defines an XI2LASTEVENT for use in the server and removes the
XI2proto.h require. XI2LASTEVENT is the current value of XI_LASTEVENT.
This patch is required by components that require access to inputInfo
(currently xf86-video-geode and xf86-video-cirrus) but should not have a
require for the XI2 protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Two issues that combined to false positives and false negatives.
- The checking for invalid bits must be performed when there are enough bits
that an event outside of LASTEVENT may be selected.
- The first invalid bit is LASTEVENT + 1, not LASTEVENT.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The protocol allows for 16 bit device ids, but the implementation doesn't
yet. We need to break the input ABI once more to shift the DeviceIntRec's
CARD8 to a CARD16, along with some changes in the privates.
Once that is done, revert this patch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The server returned the minimum of major/minor each instead of the lower of
the combined major.minor version. As a result, a client reporting
3.0 and a server supporting 2.7, the return value would be 2.0 (the minimum
of both).
Reported-by: Rémi Cardona
Reported-by: Simon Thum
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XIQueryVersion must return the client's version if the client's version is
lower than or equal to the server's version, or the server's version
otherwise.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
86077f0058ce88ee9b3df5d1ab854eeca43 switched from a boolean to a grabtype
enum. ProcXGrabDevice didn't switch with it. PickPointer during an XI grab
on a slave device would thus return a wrong (or NULL) device and crash the
server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These grabs are suported through two fake devices inputInfo.all_devices and
inputInfo.all_master_devices. These devices are not part of the device list
and are only initialised for their device id, nothing else.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's use-cases where this is useful, so take the check out preventing
that.
Reported-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a passive enter or focus in grab activates, send additional enter or
focus events with mode XIPassiveGrabNotify to the grabbing client.
Likewise, if the grab deactivates, send additional leave or focus out
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Enter grabs are checked for in CheckMotion(), each time the sprite window
changes the current grab is deactivated (if applicable) and the new grab is
activated (if applicable). Exception - if the grab is on a parent window of
the current window since we keep the grab across descendants.
Since CheckMotion() may change the grab status of a device, we mustn't get
"dev->deviceGrab.grab" in ProcessOtherEvents until after CheckMotion().
FocusIn grabs are checked in much the same manner.
The event delivery for grabs replaces the NotifyNormal on window change with
a NotifyGrab on window change. Note that this happens before the grab
activates, so the EnterNotify(NotifyGrab) is still delivered to the window,
not to the grabbing client. This is in line with the core protocol semantics
for NotifyGrab events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not having the resource mask set means we never match an existing grab,
hence we never actually ungrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the case of a RevertToFollowKeyboard, the master device should be used
(since this is the closest equivalent to the VCK as before). Only if the
master keyboard is the same as the device, revert to the VCK itself.
This didn't use to be a problem when devices could only be pointers or
keyboards, not both. Nowadays, slave devices may have both buttons and
keyboards, and in this case we don't want to deactivate a passive keyboard
grab when a button release is detected.
The wire layout is [struct xXIEventMask][mask bytes]. So the pointer needs
to not only be advanced by the mask bytes, but also by the size of the
struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
chdevcur.c:97: warning: ‘SecurityLookupIDByType’ is deprecated (declared at
../include/resource.h:269)
xiproperty.c:200: warning: passing argument 2 of ‘GetEventFilter’ from
incompatible pointer type
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's devices (e.g. some barcode readers) that have axes but no buttons.
When such a device sends a motion event, the valuator and button class is
copied into the master pointer (i.e. removing the button class).
So we need a couple of extra sanity checks for the button class to exist.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Copying all classes into the master device has drawbacks for hybrid devices
(devices that are both mice and keyboards). If such a device posts an event,
it's key classes are moved into the VCP. The key event itself is unaffected
by keyboard grabs and the like.
Partial class copying copies depending on the event and copies the classes
into the right master device (i.e. the VCK for key events, the VCP for
pointer events).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no need for internal events to be a struct with a single nested
union, we might as well make the union itself the InternalEvent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This type is only used in XI to give a hint of what type this device may be.
Call it xinput_type for clarity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Buttons append 4-byte units to the end of the reply, they need to be
included too.
Reported-by: Mark Dokter
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Both values need to fail the request, so we need to check them before
looping through the modifier masks. Otherwise, a wrong grab_window will
show up in each failed modifier return but not actually cause an error.
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
Rather than have one field per hierarchy change, XI2 has two fields - one
generic one and one per-device that include the device-specific flags.
This requires some funky handling for removed devices, but oh well.
This wrong check may cause BadLength to be returned to the client even if the
length is correct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This wrong check may cause BadLength to be returned to the client even if the
length is correct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Key events may change the modifier state, so we need to get the prev_state for
those (i.e. without the changes by the event already applied).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A XTest virtual slave device pair (kbd/ptr) exists for every master
device pair. This is so XTest events are correctly propogated via slave
devices up to Master devices and the classes are correctly changed along
the way. We add the XTest slave device pair to the Virtual Core pointer
and provide a simple way of creating the devices.
A XTest Slave Device is identified by the XTstDevicePrivateKey property
being set in the devices devProperties
XI events are still propagated through the matching device, in the hope the
client knows what it is doing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allocating a slave device is essentially the same as allocating a master device.
Hence we rename AllocMaster to AllocDevicePair and provided the ability to
indicate if a master or slave device pair is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some keyboards (?) advertise more than MAX_VALUATORS axes. Parts of the
internal event delivery relies on not having more than MAX_VALUATOR axes, so
let's cap it down.
If there's real devices that require more than the current 36, I'm sure we can
bump this up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some keyboards (?) advertise more than MAX_VALUATORS axes. Parts of the
internal event delivery relies on not having more than MAX_VALUATOR axes, so
let's cap it down.
If there's real devices that require more than the current 36, I'm sure we can
bump this up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Virtually all callers use
XkbGetRulesDefault(&rmlvo);
InitKeyboardDeviceStruct(..., rmlvo);
Let's save them the trouble and accept NULL as a hint to take the
default RMLVO.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Yes, this means we have even more arguments to GrabDevice. But it beats having
a copy of most but not all of GrabDevice in ProcGrabPointer.
Also, reshuffle the order of parameters, the CARD* status is a return value
and should be last.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Split ChangeMasterDeviceClasses into an extra XISendDeviceChangedEvent that
assembles the XI2 wire event for the DeviceChanged event. Re-use this when
detaching the last SD.
Not quite perfect yet, we still copy the device classes from the slave now
rather than from the data we had when the event occured. But it's a start.
(We can now unexport SizeDeviceInfo and CopySwapDevices, not needed anymore)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All XI2 requests have XI prefixes.
Requests affected:
ChangeDeviceCursor
QueryDevicePointer
WarpDevicePointer
SetClientPointer
GetClientPointer
XIChangeDeviceHierarchy.
This restores the original behaviour of XI 1. Any slave device may be opened,
but none of the MDs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
0 is now reserved for the "AllDevices" virtual device.
1 is now reserved for the "AllMasterDevices" virtual device.
This also means that wherever we passed in (mskidx = 0), we now need to pass
in the deviceid.
The masks were originally designed to generically handle event masks for
extensions. Since all that is in-server anyway, it's much better writing
custom event masks for those extensions that need it and not providing a
unified mechanism.
XI2 needs more than the current implementation, which is already too complex
for most other extensions. good riddance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Best to FatalError if a wrong event comes in. At least that forces me to fix
it really quickly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
dixLookupResource attempted to automatically detect whether the caller
wanted a lookup by-type or by-class, unfortunately, it guessed wrong for
RT_NONE. Instead of trying to make the guess better, this patch just reverts
the unification and creates separate functions for each operation.
Mostly the same buttons as defined by linux/input.h, with five exceptions:
"Button Unknown" for a button that cannot be labelled.
"Button Wheel Up", "Button Wheel Down" for buttons 4/5, traditionally the
wheel buttons.
"Button Horiz Wheel Up", "Button Horiz Wheel Down" for buttons 6/7,
traditionally the horiz. wheel buttons.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Keeping an AllExtensionVersions array to save all versions of
all extension is rather pointless if only one extension uses it.
Rename to XIVersion, reduce to a single struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is done by the XKB code these days anyway, so we might as well ignore it
and keep using the stanard stuff.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't pass xEvent* and count through to processing, pass a single
InternalEvent.
Custom handlers are disabled for the time being. And for extra fun,
XKB's pointer motion emulation is disabled. But stick an error in there so
that we get reminded should we forget about it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the API change, we can now purge the XI conversion from POE.
Note: this commit breaks DGA even more.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
deviceGrab.sync.event is now an internal event, and CheckDeviceGrabs and
friends is changed over.
Note that this currently breaks some frozen grabs. See towards the end of
ComputeFreezes().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Get rid of the deviceValuator processing and a few other things, but still
drop back into XI before checking device grabs or doing anything else.
NoticeEventTime now needs to take InternalEvents, and while we're at it,
change NoticeTime from a macro to a function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
Rather, modify the two callers to call separately for the two different.
events. Unexport SetMaskForEvent too.
And while we're at it, get rid of the MotionFilter macro, because it's one
half confusing and one half pointless.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
They end up being the same anyway on startup, so let's not have a dynamic mask
assignment mechanism and instead just hardcode them already.
Also unexport SelectForWindow and remove the valid_masks parameter. We can
check that before calling, since there's only one caller anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This part got lost in bc909f7136.
Reported by Tomas Carnecky.
Acked-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes crashes on mouse/keyboard combos where the mouse is both a keyboard
and a mouse. Upon copying the SD's key info into the VCP, the NULL xkbInfo of
the VCP would crash the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is copied from linux/input.h, presumably that's the ones at least the
Linux kernel can give us for any device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Make valuator event state match other events by using the device state
from before processing the event, not after. Also, we already check the
number of valuators in UpdateDeviceState, so no need to do it again.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We always use soft-repeat at the moment; XKB posts a release/press sequence,
which admittedly needs cleaning up, but that's for another day.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of always keeping two copies of the keymap, only generate the
core keymap from the XKB keymap when we really need to, and use the XKB
keymap as the canonical keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Replace both core and Xi functions with one function that validates the
proposed map, and sends out both kinds of notification.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keyboard map notifications are always generated from within XKB code,
which also takes care of copying the keysyms, etc. If you need to
mangle the keymap yourself, generate a new core keymap/modmap, and pass
it to XkbApplyMappingChange.
SendMappingNotify is renamed to SendPointerMappingNotify (and ditto its
Device variants), which still only _sends_ the notifications, as opposed
to also doing the copying a la XkbApplyMappingChange.
Also have the modmap change code traverse the device hierachy, rather
than just going off the core keyboard.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
XIShouldNotify just lets you know if you should send an event for a
keymap change (or similar) concerning a given device to a given client;
at the moment, this is only for devices which are sending events to that
client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have modmap (in the exact same format!) in XKB, so just use
that all the time, instead of duplicating the information.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since modifierKeyMap is generated from modifierMap, just remove it, and
only generate it when we need to send the modifier map to the client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Modifiers get cleared by the XKB code when we drop down into core input
processing, so just delete the dead code path to simplify things a bit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XkbInitKeyboardDeviceStruct is now the only valid keyboard
initialisation: all the details are hidden behind here. This now makes
it impossible to supply a core keymap at startup.
If dev->key is valid, dev->key->xkbInfo->desc is also valid.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes the following bug. Assuming your window manager grabs
Alt+Button1 to move windows, map Button3 to 0 via XSetPointerMapping,
then press the physical button 3 (this shouldn't have any effect), press
Alt and then button 1. The press event is delivered to the application
instead of firing the grab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: properties don't need to be cleaned up, the DIX does it for us anyway.
Data that is stored in properties is cleaned up by the property system.
Handlers, etc. don't need to be unregistered while cleaning up, as they get
deleted when the device is removed anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
This property is used to denote type float for input properties. Such
properties can be accessed easily through the XIPropToFloat() function.
Code originally written by Simon Thum.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Converts an XIPropertyValuePtr to an integer, provided that type and format is
right.
Code originally written by Simon Thum.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
CheckMotion updates the sprite position so we need to call it for all devices
that have a sprite - including floating SDs (which have an invisible sprite).
We mustn't realloc as we are inside a signal handler. With
SetMinimumEventSize, this code should never be hit anyway, as the event list
should have the required memory before this code is hit.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Rather than assuming rules in the CoreKeyboardProc, init the default rules in
InitCoreDevices, then re-use them later.
In the xfree86 DDX, set the rules to "base" or "evdev", depending on whether
we'll load kbd or evdev.
If we create a new MD, use pc105,us as default and re-use the rules file used
previously.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The device's button down state array was changed to use DOWN_LENGTH and thus
bitflags for each button in cfcb3da7.
Update the DBSN events to copy this bit-wise state.
Update xkb and Xi to check for the bit flag instead of the array value.
Reported by ajax.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
If the event is an XI event, we need to work on the correct device, not on
the VCK.
Adds XIGetDevice(event) function to extract the device from an event.
Really, this was a bad idea. It's not security, the UI features that would
have been cool (e.g. clicking through windows) aren't implemented anyway, and
there's nothing you can't achieve just by using plain XI anyway.
Requires inputproto 1.9.99.6.
The current code exposes to inconsistent updates, i.e. if handler N succeeds
but handler N+1 fails in setting the property, an error is returned to the
client although parts of the server now behave as if the property change
succeeded.
This patch adds a "checkonly" parameter to the SetProperty handler. The
handlers are then called twice, once with checkonly set to TRUE.
On the checkonly run, handlers _MUST_ return error codes if the property
cannot be applied. Handlers are not permitted to actually apply the changes.
On the second run, handlers are permitted to apply property changes.
Errors codes returned on the second run are ignored.
Most of its component get copied during CopyKeyClass anyway.
The ones that aren't:
postdown - never changed for virtual devices anyway.
down - shouldn't change that without sending events.
memcpy'ing the struct also copied mapWidth, which means we didn't realloc
during SetKeySymsMap lateron, overwriting the memory assigned to us.
X.Org Bug 16167 <http://bugs.freedesktop.org/show_bug.cgi?id=16167>
A property can only be deleted if any of the following is true:
- if a property is deletable and all handlers return Success.
- if a property is non-deleteable and the all handlers return Success AND the
delete request does not come from a client (i.e. driver or the server).
A client can never delete a non-deletable property.
We may need more than one handler to deal with a property (e.g. one in the
driver, one in the DIX), so get the handlers into a linked list and call them
one-by-one. This is of course slightly less entertaining than the hilarious
WRAP/UNWRAP game we play in other parts of the server.
XIRegisterPropertyHandler/XIUnregisterPropertyHandler are the interface
drivers/the DIX should use to attach themselves to the device.
XIDeleteAllDeviceProperties destroys everything, including the handlers.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
This fixes a severe issue - when the client died the event mask didn't get
unregistered and a future event would dereference dangling pointers. By
storing the event masks in the resource system we can free them when the
client dies.
Using id = 0 only worked pre-MPX since XInput didn't allow XOpenDevice for the
core devices (0 and 1). Now we can now legally register for events so we may
overwrite our device-independent classes with the ones selected for the VCP.
So, increase the EMASKSIZE to MAX_DEVICES + 1 and use MAX_DEVICES as the ID
when we don't have a device.
Mixing usage where some parts of the code treated this field as a bitmask
and other parts as an array of card8 was wrong, and as the wire protocol
wanted bitmasks, it was less invasive to switch the newer counting code use
booleans.
Master devices track slave buttons by waiting for all slave buttons to be
released before delivering the release event to the client.
This also removes the state merging code in DeepCopyDeviceClasses -- that
code was changing master device state without delivering any events,
violating protocol invariants. The result will be that existing slave
button state which does not match the master will not be visible through the
master device. Fixing this would require that we synthesize events in this
function, which seems like a bad idea. Note that keyboards have the same
issue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
device->button->down used to be a 32-byte bitmask with one bit for each
button. This has changed into a 256-byte array, with one byte assigned for
each button. Some of the callers were still using this array as a bitmask
however, this is fixed with this patch.
Thanks to Keith Packard for pointing this out. See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036202.html
Button events were mapped once in GetPointerEvents and then again in
UpdateDeviceState. While it might make sense to just fix up UpdateDeviceState,
it turns out to be better to leave the raw button number in the event because
DGA reports raw device events without button translation, and so when it calls
UpdateDeviceState, the button down counts get scrambled and buttons get stuck
down.
See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036201.html
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
The core protocol requires absolute values and it's a bit hard to get them if
we only have relative ones in the history. Switch the motion history to
absolute, and if we really need the relative values, we can probably generated
them from the abs. ones in the future.
Add each event to the master's MH as well as to the SDs. In the MD, store
min/max and the actual value. When retrieving the MH, rescale all coordinates
to the current coordinate range and only post those valuators that are
currently active on the device.
With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
Event is always absolute, update the device's valuators (always absolute too),
and then change the deviceValuator event to reflect the device's reporting
mode.
We can't rely on GPE to update device->valuators->axisVal. If a SIGIO occurs
during event processing this may have incoherent results.
This reverts commit f6645ddbf7.
During GetPointerEvents (and others), we need to access the last coordinates
posted for this device from the driver (not as posted to the client!). Lastx/y
is ok if we only have two axes, but with more complex devices we also need to
transition between all other axes.
ABI break, recompile your input drivers.
The state field of the event must specify the state of the devices before the
event occured. With the code as it was, the state would also include the
event (e.g. state from a button press event would show the button as pressed)
Gathering the state before updating the device should fix this.
X.Org Bug 15934 <http://bugs.freedesktop.org/show_bug.cgi?id=15934>
When the opcode squash happened in the protocol, the processing vector got out
of sync for a few requests. As a result, client and server would interpret
requests differently, leading to a couple of BadLength problems.
After UpdateDeviceState, the device has the current position in absolute
coordinates, the event has the correct valuator data to be delivered to the
client.
This is better than the approach implemented with
8973a3f798 which disabled XI altogether for 1.x.
Instead, return a device list that resembles a traditional XI setup on pre XI
2.0 servers. If the client tries to open a device other than a floating SD,
return a BadDevice error.
Turns out some programs don't like this change. gnome-settings-daemon crashes
hard if you tell it that XI doesn't exist. So, tell them we have XI, but leave
the other change (the one that pretends no devices are available).
This reverts commit 8973a3f798.
Sorry. With the huge changes in the device handling I honestly don't know how
to support XI and XI2 alongside. So let's just pretend XI doesn't exist if a
client doesn't request it supporting XI2.
Remember the version the client sent to us, so we can adjust our replies
accordingly. This requires the client to use the {major|minor}Version fields
in the GetExtensionVersion request. However, they were padding before, so we
must assume they are garbage if nbytes is non-zero. If nbytes is zero, the
client is probably a new client and we can handle it correctly.
Some leftover code from the previously used alloc/free device classes left us
with a incorrect button count. So a button release didn't come through if
a different pointer was moved after the button press.
Rather than freeing/allocing classes each time the device capabilities need to
swap, store them in the devPrivates system.
When a class is unused, it is pushed into the devPrivates, and later recovered
when needed again. This saves us a lot of memory allocations/frees, admittedly
on the cost of some memory.
We don't free the class anymore, so just store the previous pointers, do the
memcpy from the SD and then restore the pointers.
Plugs a memleak too, before xkbInfo was never freed.
Setting it to NULL isn't correct either. The correct behaviour is to realloc
it to the size necessary (or newly alloc it/free it). Otherwise we have a
memleak.
XkbInitIndicatorMap (in XkbInitDevice) calls XkbFindSrvLedInfo. This accesses
the devices kbdfeed struct, which is all nice and dandy if it is NULL. When
copying the device classes however, kbdfeed may not be NULL and thus
XkbFindSrvLedInfo goes on its merry way to do whatever it does.
By copying kbdfeed first, we avoid XkbFSLI to reference the "old" kbdfeed
struct of the previous SD.
Blindly copying will override the focus setting of the master. If there's XI
applications running, they may set the SD focus, while leaving the
MD's focus as it was. In this case, after a class swap we still want to get
the MD's events to the same window as before.
Floating SDs are paired with themselves, so the paired device may not be a
proper keyboard or mouse. Put some extra checks in to avoid dereferencing a
nullpointer later.
Some pointer devices have key classes (e.g. MS Optical Desktop 2000). The
previous test was performed as Error if ptr -> keybd or keybd -> ptr. This
doesnt work with such devices. New test is Succeed if ptr->ptr or
keybd->keybd.
This is a significant shift in how input events are perceived. The common
approach was to treat a core event as a different entity than the XI event.
This could result in the XI event being delivered to a different client than
the core event. This doesn't work nicely if they come from the same device.
Instead, we treat an input event as a single event, that is delivered through
two separate APIs. So when delivering an event, we first try the XI event,
then the core event. If the window want's neither, we go to the parent and
repeat. Once either core or XI has been delivered, the processing stops.
Important: Different to the previous method, if a client registers for core
button events, the parent window will not get XI events. This should only
cause problems when you're mixing core and XI events, so don't do that!
Generic events don't fit into this yet, they cause me headaches.
This should restore the correct passive grab processing. When checking for
passive grabs, the core event is emulated and we check first for XI grabs on
the window, then for core grabs. Regardless of which event activates the grab,
the XI event is stored in the device's EQ.
When replaying the event, we take the XI event and replay it on the next
window, again including the emulation of the core event.
If two devices are attached to the same master device, pressing button 1 on
each of them leads to two button presses from the same device. Some apps
really don't like that.
So we just put a counter in place and only send the first press and the last
release.
The window ID includes the client ID anyway, so we might as well just look up
the client directly instead of trying to get the window first and the client
from the window.
This also fixes a possible issue with XACE. If the client had permission to
write on the client but not on the window, the previous approach would have
failed.
All the rest of XI uses rc and returns rc in case of error, so make
mpx-related stuff comply. This stops the rest of XI sending the error
manually.
This is just a cosmetic change to be in line with the rest.
This doesn't change much, as the struct previously given has the same size as
the ones now anyway. Still, we should be pendantic.
Thanks to Simon Thum for reporting.
If we have one global filter, one pointer may change the filter value and
affect another pointer.
Reproduceable effect:
blackbox and xterm, start dragging xterm then click anywhere with the other
pointer (attached to different masterd device!). The button release resets
the filter[Motion_Filter(button)] value, thus stopping dragging and no event
is sent to the client anymore.
Having the filters set per device gets around this.
Setting it to the size of a pointer is an interesting but equally wrong
approach. Luckily Xlib never used this field anyway so nobody got hurt so far.
Spotted by Simon Thum.
(cherry picked from commit 0f2398d06c)
Setting it to the size of a pointer is an interesting but equally wrong
approach. Luckily Xlib never used this field anyway so nobody got hurt so far.
Spotted by Simon Thum.
We free the ValuatorClassRec quite regularly. If a SIGIO is handled while
we're swapping device classes, we can bring the server down when we try to
access lastx/lasty of the master device.
Sometimes (e.g. on my debian ppc box) maxKeysPerModifier of the SD is 0. So we
try to malloc(0), bringing the whole server down with a FatalError because it
looks as if the malloc failed. This is bad, so only alloc if we actually have
something to alloc.
Turns out it's really really hard synchronising device state across multiple
duplicated events if they all share the same struct. So instead of doing so,
when the SD changes deep-copy all it's classes into the MD. The MD then has
the same capabilities, but the state can be set separately. This should fix
xkb, key state, repeat etc. problems.
Updating the device state allows us to remove the SwitchCoreKeyboard from the
event gathering, it's all done during event processing now.
The master needs to have the same devPrivate as the slave, in case a client
issues a request that goes down to the driver.
Example: if a driver wants to ring the keyboard bell, it'll pick a keyboard.
The KeyClassPtr will direct it to the matching method in the driver, but
because the MD doesn't have the devPrivate set the driver segfaults.
Even if all drivers were updated to not dereference the nullpointer, nothing
would actually ever happen.
To avoid this, we flip the master's public.devPrivate to the last SDs
devPrivate.
POE now only deals with processing the event and calling the appropriate
delivery methods. Actually modifying the device state is done in
UpdateDeviceState. This separation should make it easier to avoid setting the
state twice when master events are processed.
Each time a different slave device sends through a master, an
DeviceClassesChangedEvent is enqueued. When this event is processed, all
classes of the matching master device are changed, and the event is sent to
the clients.
Next time the master is queried, it thus shows the evclasses of the last slave
device. The original classes are stored in the devPrivates.
TODO: if all slave devices are removed, the master's original classes need to
be restored.
Removes "LookupKeyboardDevice" and "LookupPointerDevice" in favor of
inputInfo.keyboard and inputInfo.pointer, respectively; all use cases
are non-XI compliant anyway.
Let the drivers only generate XI events and put those into the event queue.
When processing events, generate core events as needed. This fixes a number of
problems with XKB and the DIX in general.
The previous approach was to put core events and XI events as separate events
into the event queue. When being processed, the server had no knowledge of
them coming from the same device state change. Anything that would then change
the state of the device accordingly was in danger of changing it twice,
leading to some funny (i.e. not funny at all) results.
Emulating core events while processing XI events fixes this, there is only one
path that actually changes the device state now. Although we have to be
careful when replaying events from synced devices, otherwise we may lose
events.
Note: XI has precedence over core for passive grabs, but core events are
delivered to the client first.
This removes the wrapping added in 340911d724
Followup to [1].
If a core grab causes the device to freeze, it overwrites the processInputProc
of the device. [1] would then overwrite this while unwrapping, the device
does not thaw anymore.
Changing this to only re-wrap if the processInputProc hasn't been changed
during the event handling.
[1] 340911d724
When processing events from the EQ, _always_ call the processInputProc of the
matching device. For XI devices, this proc is wrapped in three layers.
Core event handling is wrapped by XI event handling, which is wrapped by XKB.
A core event now passes through XKB -> XI -> DIX.
This gets rid of a sync'd grab problem: with the previous code, core events
did disappear during a sync'd device grab on account of mieqProcessInputEvents
calling the processInputProc of the VCP/VCK instead of the actual device. This
lead to the event being processed as normal instead of being enqueued for
later replaying.
The device state needs to be changed while processing the XI event. Core
events are always processed after XI, so by then the device is already set up
properly. However, we now rely on DeviceButtonMotionMask to be equal to
ButtonMotionMask. It already is, but stick a big fat warning in so nobody
attempts to change it.
This commit disables XKB for the VCK, thus essentially for all devices.
Temporarily anyway.
We need this to allow extensions to fill in extra data for an event before it
is sent to the client. This is probably to be used like
FillUpEventsFromWindow().
This is definitely necessary in CheckDeviceGrabAndHintWindow (thanks to Paulo
Zanoni for spotting it). We're resetting it everywhere else too, just to be
save.
Device drivers flush their buttons on device init and cause a button down
event to be generated. If we unconditionally decrease the buttons, we won't be
able to ever get a passive device grab.
Format documentation for CheckDeviceGrabs to make it readable.
(cherry picked from commit 3e894974cd)
Conflicts:
Xi/exevents.c
Device drivers flush their buttons on device init and cause a button down
event to be generated. If we unconditionally decrease the buttons, we won't be
able to ever get a passive device grab.
Format documentation for CheckDeviceGrabs to make it readable.
This quickfixes event delivery problems with XI events when a grab was on.
deviceMask is only used when the grab was from a ButtonPress to preserve
potential XI event masks.
This is not an ideal solution but it works until I have time to work on
PassiveGrabs.
We need this for clients that need to set the ClientPointer but don't have a
window on display yet. If used, it will set the device as the ClientPointer
for the requesting client.
Add XGE handling in DeliverGrabbedEvent.
We can now grab something selecting XGE events, but the current code is a
bit messy and doesn't work too well yet.
Add RawDeviceEvent (pointers only for now).
This commit changes the event queue to use EventLists instead of xEvent
arrays. Only EQ is affected, event delivery still uses xEvent* (look for
comment in mieqProcessInputEvent).
RawDeviceEvents deliver driver information to the client, without clipping or
acceleration.
Requires moving the spriteTrace into the DeviceIntRec and adjusting a few
functions to take in device argument, most notably XYToWindow().
Cursor rendering on the second screen is busted.