When used for single-GPU multi-seat purposes, there's no need to enable
ephyr virtual input devices, since Xephyr is supposed to handle its own
hardware devices.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Multi-seat-capable display managers commonly pass command-line options
like "-novtswitch", "-sharevts", or "-layout seatXXXX" to Xorg server,
but Xephyr currently refuses to start if these options are passed to it,
which may break Xephyr-based single-GPU multiseat setups.
[ajax: shortened summary]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
KDrive evdev driver deliberately name grabbed devices as "Evdev mouse"
or "Evdev keyboard". This patch will make it skip this step if grabbed
devices are already named (i.e. from udev).
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
If kdrive input driver "evdev" is available, no other driver was
explicitly set for a given input device, and its kernel device node is
/dev/input/event*, this patch will make kdrive set "evdev" driver
automatically for such device.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
This patch simplifies NewInputDeviceRequest() implementation in
kinput.c, making use of improved KdParseKbdOptions() /
KdParsePointerOptions() and merging several "if (ki)"/"if (pi)" clauses.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
This should fix aborts()s from epoxy on old software stacks.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This only worked if the backend server supported DRI1, which is
stunningly unlikely these days.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This applies regardless of which DRI you're asking for. Worse, leaving
it out means breaking the config file syntax in a pointless way, since
non-DRI servers can safely just parse it and ignore it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Adds Skylake, Kabylake and Broxton allowing them to use
modesetting + glamor with dri2.
Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
This adds support to Xwayland to try and use OpenGL core
profile for glamor first.
v1.1: use version defines.
v2: let glamor work out core profile itself.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
On desktop GL, ask for a 3.1 core profile context if that's available,
otherwise create a generic context.
v2: tell glamor the profile is a core one.
v2.1: add/use GL version defines
v3: let glamor work out core itself
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Core contexts require the use of vertex array objects, so switch both glamor
and ephyr/glamor over.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes build errors of:
present.c: In function 'ms_do_pageflip':
present.c:410:17: error: 'drmmode_bo' has no member named 'gbm'
new_front_bo.gbm = glamor_gbm_bo_from_pixmap(screen, new_front);
^
present.c:412:22: error: 'drmmode_bo' has no member named 'gbm'
if (!new_front_bo.gbm) {
^
present.c: In function 'ms_present_check_flip':
present.c:536:36: error: 'drmmode_bo' has no member named 'gbm'
if (drmmode_crtc->rotate_bo.gbm)
^
Introduced by commit 13c7d53d
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
No real change, but if the driver is broken and doesn't provide a PreInit
function, then we don't need to worry about logind.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
InputClass sections use various MatchFoo directives to decide which device to
apply to. This usually works fine for specific snippets but has drawbacks for
snippets that apply more generally to a multitude of devices.
This patch adds a NoMatchFoo directive to negate a match, thus allowing
snippets that only apply if a given condition is not set. Specifically, this
allows for more flexible fallback driver matching, it is now possible to use a
snippet that says "assign driver foo, but only if driver bar wasn't already
assigned to it". For example:
Section "InputClass"
Identifier "libinput for tablets"
MatchIsTablet "true"
NoMatchDriver "wacom"
Driver "libinput"
EndSection
The above only assigns libinput to tablet devices if wacom isn't already
assigned to this device, making it possible to select a specific driver by
installing/uninstalling it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
The motivation for getting this is chrome remote desktop that runs under
Xvfb and wants to use RANDR to adjust screen size according to the
remote desktop client screen size. Apparently there are other use cases
as well, the bug mentions gnome-settings-daemon testing.
[ajax: massaged commit message]
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=26391
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Lambros Lambrou <lambroslambrou@google.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Siim Põder <siim@p6drad-teel.net>
Also change the dot font setting back to the default of Helvetica as
doxygen no longer ships FreeSans.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Since non-seat0 X servers no longer touch VTs, I believe these settings
are unnecessary.
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(Sorry for double posting)
I repost this patch because I havn't got any replies from maintainers
since I posted the initial patch back in March.
Some instructions are not emulated correctly by x86emu when they
are prefixed by the 0x66 opcode.
I've identified problems in the emulation of these intructions: ret,
enter, leave, iret and some forms of call.
Most of the time, the problem is that these instructions should push or
pop 32-bit values to/from the stack, instead of 16bit, when they are
prefixed by the 0x66 special opcode.
The SeaBIOS project aims to produce a complete legacy BIOS
implementation as well as a VGA option ROM, entirely written in C and
using the GCC compiler.
In 16bit code produced by the GCC compiler, the 0x66 prefix is used
almost everywhere. This patch is necessary to allow the SeaBIOS VGA
option ROM to function with Xorg when using the vesa driver.
SeaBIOS currently use postprocessing on the ROM assembly output to
replace the affected instruction with alternative unaffected instructions.
This is obviously not very elegant, and this fix in x86emu would be
more appropriate.
v2: - Decrement BP instead of EBP in accordance with the Intel Manual
- Assign EIP instead of IP when poping the return address from the
stack in 32-bit operand size mode in ret_far_IMM, ret_far, and iret
- When poping EFLAGS from the stack in iret in 32-bit operand size
mode, apply some mask to preserve Read-only flags.
v3: - Rebase
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
This moves the code from the platform case into
a common function, and calls that from the
other two.
v2: Emil convinced me we don't need to lookup pEnt
here, so let's not bother.
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This isn't used anywhere, so no point storing it until we need it.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Xorg.wrap includes code guarded with WITH_LIBDRM for detecting KMS drivers.
Unfortunately it is never activated since code missed to include file
which defines WITH_LIBDRM.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92894
Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove code in xf86Wakeup for dealing with device and other input and
switch to using the new NotifyFd interface.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace the block/wakeup handler with a NotifyFd callback instead.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace the block/wakeup handlers with a NotifyFd callback.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Eliminates polling every 20ms for device input.
v2: rename ephyrPoll to ephyrXcbNotify and fix the API so it can be
used directly for SetNotifyFd. Thanks to Daniel Martin
<consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Cc: Daniel Martin <consume.noise@gmail.com>
This switches the kdrive code to use FD notification for input
devices, rather than the block and wakeup handlers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace the block/wakeup handlers with a NotifyFd callback
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When unplugging an output, it's still listed in xrandr and the size
of the root window still includes the removed output.
The RR output should be destroyed when its Wayland counterpart is
destroyed and the screen dimensions must be updated in both the done
and the destroy handlers.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92914
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
In Wayland, a client (in this case XWayland) should set the cursor
surface when it receives pointer focus. Not doing this will leave the
curser at whatever it was previously.
When running on XWayland, the X server will not be the entity that
controls what actual pointer cursor is displayed, and it wont be notified
about the pointer cursor changes done by the Wayland compositor. This
causes X11 clients running via XWayland to end up with incorrect pointer
cursors because the X server believes that, if the cursor was previously
set to the cursor C, if we receive Wayland pointer focus over window W
which also has the pointer cursor C, we do not need to update it. This
will cause us to end up with the wrong cursor if cursor C was not the
same one that was already set by the Wayland compositor.
This patch works around this by, when receiving pointer focus, getting
the private mipointer struct changing the "current sprite" pointer to
an invalid cursor in order to trigger the update path next time a cursor
is displayed by dix.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Otherwise the server may try to draw onto the root window when closing
down, but when running rootless the root window has no storage thus
causing a memory corruption.
Thanks to Adam Jackson <ajax@redhat.com> for helping tracking this down!
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93045
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Marek Chalupa <mchqwerty@gmail.com>
check return values of RR.*Create calls
v2. do not bail out if we don't have any output
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
don't leak memory when realizing window fails
v2. take care of all memory allocation and return values,
not just one leak
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Globally replace #ifdef and #if defined usage of 'sun' with '__sun'
such that strict ISO compiler modes such as -ansi or -std=c99 can be used.
Signed-off-by: Richard PALO <richard@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The number of FDs has been decremented already, therefore the
number contained the index of the top one that is to me moved down.
This problem was introduced by:
commit 1110b71e36
Author: Chris Clayton <chris2553@googlemail.com>
kdrive: fix build error on gcc 4.8 for out-of-bounds array access
The reason for the warning was likely a confused compiler.
Hoping to reduce the confusion by moving the decrement behind the end
if the copy loop.
Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This was added in:
commit 4301479508
Author: Olivier Fourdan <ofourdan@redhat.com>
Date: Mon Jan 5 16:44:22 2015 +0100
Synchronize capslock in Xnest and Xephyr
Which is fine if you're building both, but if you don't happen to have
xcb-util-keysyms' headers installed Xnest will configure as enabled but
fail to build.
Fortunately <X11/X.h> has a corresponding #define, so use that instead.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
wl_keyboard::enter is the equivalent of FocusIn + KeymapNotify: it
notifies us that the surface/window has now received the focus, and
provides us a set of keys which are currently down.
We should use these keys to update the current state, but not to send
any events to clients.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>