All users of glamor had the same value set, and it complicated things
for no reason.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This should be useful for glamor development, so you can test both
paths (which are significantly different, and apparently
glamor_gradient.c was broken on GLES2 as of the import).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The difference between the two is that XF86 has the clip helper that
lets you upload less data when rendering video that's clipped. I
don't think that's really worth the trouble, especially in a world of
compositors, so I've dropped it to get to shared code.
It turns out the clipping code was broken on xf86-video-intel anyway.
To reproduce, run without a compositor, and use another window to clip
the top half of your XV output on the glamor XV adaptor: the rendering
got confused about which half of the window was being drawn to.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
No code modifies it at runtime, and it's common to store string
literals to it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
I want to expose this from Xephyr as well, both to be able to test XV
changes rapidly, and beause the XV passthrough to the host's overlay
really doesn't work out well when we glXSwapBuffers() over the
colorkey.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Now that we don't have to worry about the generic adaptors code,
there's no need to have a list of pointers to different sets of
adaptors.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
These were field-for-field identical, so we can just typedef them to
be the same, and memcpy their contents.
v2: Fix missed strdup().
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
glx will sometimes select a non-root visual, deal with that by
creating a suitable colormap and using that instead of attempting to
use the default colormap.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is so that drivers can do a runtime check that Present is available,
similar to existing runtime checks performed by the drivers for DRI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is so that drivers can do a runtime check that DRI3 is available,
similar to existing runtime checks performed by the drivers for DRI and
DRI2.
v2: Only add DRI3 to the list if the module was actually built into the
server (Mark Kettenis).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Keith Packard <keithp@keithp.com>
To make X -configure work properly, the output of fixup_video_driver_list()
should be in order of preference. Otherwise, the config file may use
the incorrect driver for some devices.
In particular, the drivers that work for all (or many) devices need to be
last in the list. Since the modesetting driver works for many devices,
it needs to be considered a fallback driver.
Signed-off-by: Søren Sandmann <ssp@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Update for __glXLastContext -> lastGLContext.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This has to run at initial CreateWindow time, at CreateScreenResources
the root window doesn't actually exist yet.
Tested-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
v2: Fix another path spotted by keithp
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Checking the iterating variable ("slave") against null can not detect if the
xorg_list_for_each_entry finished without break being invoked - slave variable
will be always non-null. This caused segfault whenever someone tried to use
DRI_PRIME with incorrect id while having at least one render offloading slave
configured.
Restructurize the GetScreenPrime to work as expected.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xorg server could be built for and run on Synopsys DesignWare ARC cores.
These changes are required for successful building and execution of the server.
Both little-endian and big-endian flavors of ARC cores are supported.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Egbert Eich <eich@freedesktop.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch fixes some compile warnings that arise after
commit 7070ebeeba
(xfree86: add new key MatchSeat to xorg.conf sections "Device", "Screen", and "ServerLayout")
available at git repository
git://people.freedesktop.org/~whot/xserver for-keith
Signed-off-by: Keith Packard <keithp@keithp.com>
We can only request one fd per device from systemd-logind. If a fd is re-used
by the same device, releasing the fd from one device doesn't mean we can close
it. The systemd code knows when it's really released, so let it close the fd.
Test case: xorg.conf section for an input device with hotplugging enabled.
evdev detects the duplicate and closes the hotplugged device, which closes the
fd. The other instance of evdev thinks the fd is still valid so now you're
playing a double lottery. First, which client(s) will get the evdev fd?
Second, which requests will be picked up by evdev and which ones will be
picked up by the client? You'll never know, but the fun is in finding out.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
With the change in the cursor interface in
4c3932620c, we need to bump the video
driver ABI number to ensure that drivers are rebuilt to match the new
interface.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Laércio de Sousa <lbsousajr@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch introduces a new key MatchSeat in xorg.conf (also applies to
any .conf file in xorg.conf.d). It will allow targeting a given
"Device", "Screen", and/or "ServerLayout" section to a particular
seat only (specified by option "-seat" in X server command line),
so that other seats won't be affected.
Without this patch, one needs to write a separate xorg.conf.custom
file and pass it to X server via "-config" option, if one wants that
these settings only apply for the right seat. However, in some cases,
this solution is undesirable or even impossible (e.g. when using GDM,
which doesn't allow X server command line customization).
Example file (/etc/X11/xorg.conf.d/seat1.conf), which would be ignored
by X server unless it was started with "-seat seat1" option:
Section "Device"
Identifier "card0"
Driver "nvidia"
Option "NoLogo" "True"
MatchSeat "seat1"
EndSection
Signed-off-by: Oleg Samarin <osamarin68@gmail.com>
Signed-off-by: Laércio de Sousa <lbsousajr@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently non-seat0 X servers only probe platform bus for graphics devices,
which is OK for most KMS-compliant drivers. However, for non-KMS drivers
(like NVIDIA proprietary ones), graphics devices can't be reached
by platform bus probe, resulting in a "No devices detected" error.
This patch allows a fallback to PCI bus probe for non-seat0 X servers
in case no platform bus graphics device is found.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66851
Signed-off-by: Laércio de Sousa <lbsousajr@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 7353ec7cb6 "xfree86: Switch int10
code to stdint types" uses designated initializers to setup the fields
of the X86EMU_pioFuncs.
This breaks compilation on ARM, since out{b,w,l}() are redefined using
the preprocessor and therefore cause the compiler to complain about
non-existent fields being assigned to.
It seems like the compiler.h header that contains these redefinitions
isn't actually needed in xf86x86emu.c, so the easiest "fix" is to not
include it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes:
stub.c:66:1: error: conflicting types for 'xf86int10Addr'
In file included from stub.c:14:0:
xf86int10.h:72:53: note: previous declaration of 'xf86int10Addr' was here
Signed-off-by: Rob Clark <robdclark@gmail.com>
Create load_cursor_image_check, load_cursor_argb_check,
LoadCursorImageCheck and LoadCursorARGBCheck that can return failure
and use them in preference to the old unchecked variants.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michael Thayer <michael.thayer@oracle.com>
When setting crtc->gamma_size to randr_crtc->gammaSize we should
use randr_crtc->gammaSize to allocate new gamma table in crtc.
Currently, if randr_crtc->gammaSize > crtc->gammaSize the subsequent
memcpy will overwrite memory beyond the end of gamma table.
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Mark mips64 as 64bit
Use long as PORT_SIZE
Signed-off-by: YunQiang Su <wzssyqa@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Ok, that's embarassing -- I didn't even make sure Adam's patch
compiled. These are minimal fixes to make it build.
Signed-off-by: Keith Packard <keithp@keithp.com>
Somewhat shocking how much simpler this is, isn't it? We no longer need
to wrap the screen or GC or Picture, because damage does it for us,
which is doubly great since the old shadowfb code didn't wrap _enough_
things (border updates and Render glyphs, at least). The only real
difference now between this and shadow is a) shadow will let you track
arbitrary pixmaps, and b) shadow's update hook runs off the BlockHandler
whereas shadowfb is immediate.
Tested on nouveau.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Flagged by cppcheck 1.64:
[hw/dmx/config/xdmxconfig.c:306] -> [hw/dmx/config/xdmxconfig.c:323]:
(warning) Possible null pointer dereference: fs - otherwise
it is redundant to check it against null.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes Piglit test "swapbuffersmsc-return swap_interval 0".
Ensure that *swap_target gets initialized on any 'return Success' path,
even if the swap request can't be completed by the driver and the server
falls back to a simple blit. That path can also be triggered by setting
swap_interval to 0, which disables sync to vertical retrace.
We originally found this bug because for some reason SDL2 automatically
sets swap_interval to 0, when we were trying to test OML_sync_control in
an SDL2 test application. We then discovered that the above-mentioned
Piglit test has been failing for the same reason since it was
introduced.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
swap_target is an out-parameter that needs to be set to the value that
SBC will take on after this SwapBuffers request completes.
However, it was also being used as a temporary variable to hold the MSC
at which the SwapBuffers request got scheduled to occur. This confusion
makes it harder to reason about whether swap_target is being set
correctly for its out-parameter usage. (Hint: It isn't.)
For the latter use, it makes more sense to use the existing target_msc
variable, which already has the right value unless target_msc, divisor,
and remainder are all 0, in which case we can set it using swap_interval
as usual.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
I'm not sure what we'd do in this case anyways, other than fatal
error.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
