Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This function is mostly correct for early reject usage. With a small
change to pass the client resource explicitly and making the
TouchOwnership event optional, it is usable for all rejection scenarios.
This change exports it for use outside Xi/exevents.c and modifies the
name accordingly.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The server often needs to generate and deliver TouchEnd events for
circumstances including touch grab acceptance and rejection. This change
refactors the code so it can be used more easily.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
According to Daniel Kurtz, a typedef void *pointer is a atomic type. So a
'const pointer' is equivalent to 'void* const' instead of the intended
'const void*'.
This technically changes the ABI, but we don't bump it for this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The current code short-circuits around the block that removes the
rejecting listener if it is the only listener left. It also does not
delete the touchpoint record if the touch has not physically ended.
This change ensures the listener is removed under these circumstances.
Signed-off-by: Chase Douglas <chase.douglas@ubuntu.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A touchpoint is ended when no further processing will take place for it.
This includes the situation where there is only one grabbing client, and
the client receives a touch end before it has accepted/rejected the
touchpoint.
This change ensures that a delivered touch end event is converted into a
touch update event under the above scenario. If the event is left as a
touch end event, the touchpoint will be ended in ProcessTouchEvent().
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device is already grabbed, don't activate the passive grab, it screws
with our event masks. Just deliver to the grabbing client instead.
Reported-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
CreateGrab() expects the keyboard mode to be stored in grab_mode, and the
pointer mode in other_device_mode, so respect this in passive XI2 grabs,
and switch modes if needed.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Consists mostly of generating an ownership event and processing it.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Ownership changes don't get processed directly when they happen, instead the
DIX submits an ownership event which goes through ProcessTouchEvents and
ProcessTouchOwnershipEvents.
Then on the required events are generated and sent to clients.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Includes a hack for implicit grab activation, because integrating this
requires a larger rewrite and I'm not sleeping enough as it is.
Right now, we deliver the event and check before/after if there is an
implicit grab on. If one activated, then store the event in the grab and
switch the listener type to a grab listener.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Does not include pointer emulation handling.
Does include partial ownership handling but not the actual processing of
ownership events.
Note: this commit is a retroactive commit extracted from a series of ~50
commits and may thus appear a bit more complicated than what you'd write out
from scratch.
Pointer processing tree is roughly:
- ProcessOtherEvents
- ProcessTouchEvents
- DeliverTouchEvents
- DeliverTouchBeginEvent|DeliverTouchEndEvent|...
- DeliverOneTouchEvent
Also hooks up the event history playing to the right function now.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Co-authored-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Update the logical button state for pointer-emulating events. Button state
must be kept separate from the ButtonClassRec to avoid clearing the button
state on a touch end if there is a physical button still down.
And obviously don't change the button state if we're currently replaying the
event history for some client.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Selecting for any of XI_TouchBegin/Update/End/Ownership requires the three
bits for begin/update/end to be set.
Only one client at a time may select for XI_TouchBegin event
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
These structs will be used to store touch-related data, events and
information.
Drivers must call InitTouchClassDeviceStruct to set up a multi-touch capable
device.
Touchpoints for the DDX and the DIX are handled separately - touchpoints
submitted by the driver/DDX will be stored in the DDXTouchPointInfoRec. Once
the touchpoints are processed by the DIX, new TouchPointInfoRecs are created
and stored. This process is already used for pointer events with the
last.valuators field.
Note that this patch does not actually add the generation of touch events,
only the required structs.
TouchListeners are (future) recipients of touch or emulated pointer events.
Each listener is in a state, depending which event they have already
received. The type of listener defines how the listener got to be one.
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This patch applies most of the protocol conversions and the internal event
type for ownership events.
Note that ownership events are generated by the DIX only, they do not pass
through the event queue.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No-one can generated them yet, but if they could, we'd be processing them
like there was no tomorrow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The are the same as device events internally but require the touch ID
separately from the detail.button field (the protocol uses the detail field
for the touch id).
For simpler integration of pointer emulation we need to set the
detail.button field while keeping the touchid around.
Add the three new touch event types to the various places in the server
where they need to be handled. The actual handling of the events is somewhat
more complicated in most places.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
All the DeepCopy stuff really needs to be shared between the init calls the
drivers use and this code here. Too many bugs by not keeping the two in
sync.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
They achieve the same thing, re-use the more generic InputLevel so we can
convert to/fro easier.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Functional change: for a button mapped to 0, the motionHintWindow is not
updated to the NullWindow anymore. Before it got updated unconditionally to
the button mapping. I have no idea what the practical effect of this is, but
I guess it's closer to the correct behaviour: pressing a button that's
logically disabled now does not disrupt the motion hint delivery.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
It doesn't return anything, nor does it's caller expect it to.
Fixes Solaris Studio compiler error:
"xichangehierarchy.c", line 214: Function has no return statement : disable_clientpointer
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
'state' is shadowed by the XKB 'state' as well (which feeds into the event
too), so rename this one to clarify that this is the core event state only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
if a client had the to-be-removed device as ClientPointer, reset to NULL.
Fixes#43165
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Once grabs start having nested memory locations, we can't just use the
GrabRec on the stack anymore, we need to alloc/copy/free the grabs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This code had an off-by-one and would allow writing one past the end of
the callbacks array.
Pointed out by coverity.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Does what it says on the box, complements MakeInputMask.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Currently not needed since the InputClientRec is a self-contained struct. As
part of the touch rework that won't be the case in the future and a function
to allocate/free memory appropriately is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Some failures returned status but the actual return code was "ret". Use
"ret" consistently and move status to the local block is used in.
[the goto isn't necessary yet, but for a future patch]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Now that MakeAtom takes const char *, so can XIGetKnownProperty.
Clears 71 warnings from gcc -Wwrite-strings of the form:
devices.c:145:5: warning: passing argument 1 of 'XIGetKnownProperty' discards qualifiers from pointer target type
../include/exevents.h:128:23: note: expected 'char *' but argument is of type 'const char *'
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Wherever it's obvious which device we need (keyboard or pointer), use
GetMaster() instead of GetPairedDevice(). It is more reliable in actually
getting the device type we want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
They don't have a KeyClassRec, but we must still allow passive grabs on
them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
If we're sending the event for a given device, make sure the deviceid is
that of the device.
This allows callers to use the same DCE for slave and master without having
to fiddle the DCE's internal fields.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Instead of device and master (and just using master), drop the master
argument and let the callers pass in the device the event is to be sent for.
No effective functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
For scroll wheel support, we used to send buttons 4/5 and 6/7 for
horizontal/vertical positive/negative scroll events. For touchpads, we
really want more fine-grained scroll values. GetPointerEvents now
accepts both old-school scroll button presses, and new-style scroll axis
events, while emitting both types of events to support both old and new
clients.
This works with the new XIScrollClass to mark axes as scrolling axes.
Drivers mark any valuators that send scroll events with SetScrollValuator.
(Currently missing: the XIDeviceChangeEvent being sent when a driver changes
a scroll axis at run-time. This can be added later.)
Note: the SCROLL_TYPE enums are intentionally different values to the XI2
proto values to avoid copy/overlapping range bugs.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Relative axes are initialized with 0, -1 but so far this never had any
effect as all users of this function (for relative axes) just set it to the
defaults anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Return errors instead of silently ignoring them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
To be used for smooth scrolling with future driver APIs, replacing
Rel Vert Wheel and Rel Horiz Wheel axes, which have not been used in any
open driver to date.
Combined with double-granularity ValuatorMasks, these axes allow for
fine-grained scroll data to be sent to clients. Future commits allow
drivers to post these scroll axes to
QueuePointerEvents/GetPointerEvents, which take care of emulating legacy
scroll button events.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Change the last real user of a split integer/fractional co-ordinate
system, DeviceIntRec's last->{valuators,remainder} to just have one set
of doubles.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Change the DeviceEvent InternalEvent to use doubles for its valuators,
instead of data and data_frac.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The corresponding DeviceIntPtr wasn't being gotten properly,
resulting in BadDevice from dixLookupDevice().
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Swapping the wrong size was never caught because swap{l,s} are macros.
It's clear in the case of Xext/xres.c, that the author believed
client_major/minor to be CARD16 from looking at the code in the first
hunk.
v2: dmx.c fixes from Keith.
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
exevents.c: In function 'UpdateDeviceState':
exevents.c:719:9: warning: variable 'bit' set but not used
[-Wunused-but-set-variable]
exevents.c: In function 'ProcessOtherEvent':
exevents.c:889:22: warning: variable 'v' set but not used
[-Wunused-but-set-variable]
exevents.c:888:17: warning: variable 'k' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, prep work for future changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Compare two version numbers in the major.minor form.
Switch the few users of manual version switching over to the new function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
The macro is sufficient if called during a development cycle, but not
sufficient information when triggered by a user (e.g.
https://bugzilla.redhat.com/show_bug.cgi?id=688693).
Expand what this does to print the event content and a backtrace, so at
least we know where we're coming from. Only the first 32 bytes are printed
since if something goes wrong, the event we have is almost certainly an
xEvent or xError, both restricted to 32 bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Grabbing an SD device temporary floats the device but we must not release
the buttons. Introduced in
commit 9d23459415
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Fri Feb 25 11:08:19 2011 +1000
dix: release all buttons and keys before reattaching a device (#34182)
X.Org Bug 36146 <http://bugs.freedesktop.org/show_bug.cgi?id=36146>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Conditional jump or move depends on uninitialised value(s)
at 0x4357A1: GetEventMask (events.c:454)
by 0x43B9E8: DeliverEventsToWindow (events.c:2029)
by 0x4E0C59: SendEventToAllWindows (exevents.c:2125)
by 0x4E8301: XISendDeviceHierarchyEvent (xichangehierarchy.c:118)
by 0x426F99: DisableDevice (devices.c:507)
by 0x46BF72: xf86Wakeup (xf86Events.c:457)
by 0x432ABA: WakeupHandler (dixutils.c:419)
by 0x45B708: WaitForSomething (WaitFor.c:235)
by 0x42E8D9: Dispatch (dispatch.c:367)
by 0x422DC9: main (main.c:287)
Uninitialised value was created by a stack allocation
at 0x4E8190: XISendDeviceHierarchyEvent (xichangehierarchy.c:61)
Conditional jump or move depends on uninitialised value(s)
at 0x43BB78: DeliverEventsToWindow (events.c:2010)
by 0x4DDEEA: FindInterestedChildren (exevents.c:2103)
by 0x4DDEFF: FindInterestedChildren (exevents.c:2104)
by 0x4DDEFF: FindInterestedChildren (exevents.c:2104)
by 0x4DDEFF: FindInterestedChildren (exevents.c:2104)
by 0x4DDEFF: FindInterestedChildren (exevents.c:2104)
by 0x4E0C6F: SendEventToAllWindows (exevents.c:2127)
by 0x4E8301: XISendDeviceHierarchyEvent (xichangehierarchy.c:118)
by 0x426F99: DisableDevice (devices.c:507)
by 0x46BF72: xf86Wakeup (xf86Events.c:457)
by 0x432ABA: WakeupHandler (dixutils.c:419)
by 0x45B708: WaitForSomething (WaitFor.c:235)
Uninitialised value was created by a stack allocation
at 0x4E8190: XISendDeviceHierarchyEvent (xichangehierarchy.c:61)
Set the type of dummyDev to SLAVE. The jump listed above comes from a check
to IsMaster() in GetEventMask() that would then set the
XIAllMasterDevices mask.
Hierarchy events can only be set for XIAllDevices so the above IsMaster()
check had no effect and the device type doesn't really matter anyway beyond
shuting up valgrind.
Also initialize dummyDev to 0 to ease future debugging.
X.Org Bug 36120 <http://bugs.freedesktop.org/show_bug.cgi?id=36120>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
commit 678f5396c9 only fixed the
initialization, not the copy. After a slave device change, the valuator
were out of alignment again.
X.Org Bug 36119 <http://bugs.freedesktop.org/show_bug.cgi?id=36119>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
WriteReplyToClient() swaps rep.length, so it can't be used
on return of WriteReplyToClient(). So save it's value for later
use.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Julien Cristau <jcristau@debian.org>
This removes the struct, but keeps InitAbsoluteClassDeviceStruct as
a no-op and preserves related struct layout.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If modifiers failed, the reply length was 4 bytes too short.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
ChangeDeviceProperty and XIChangeProperty are followed by some data, so
use REQUEST_AT_LEAST_SIZE instead of REQUEST_SIZE_MATCH.
X.Org bug#35082 <https://bugs.freedesktop.org/show_bug.cgi?id=35082>
Reported-by: Markus Fleschutz <markus.fleschutz@x-software.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is not a straightforward search/replacement due to a long-standing
issue.
dev->u.master is the same field as dev->u.lastSlave. Thus, if dev is a master
device, a check for dev->u.master may give us false positives and false
negatives.
The switch to IsFloating() spells out these cases and modifies the
conditions accordingly to cover both cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
These two were sideeffects of lastSlave being in the same field as the
master. For devices generated by the master device directly, lastSlave was 0
and the device would (with the old checks) be interpreted as floating.
Add the required checks to safeguard against master devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
When system is out of memory, calloc can fail returning a NULL pointer.
Check for this before dereferencing it, and bail out if it fails.
Ref.: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/720445
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When a client has selected for Xi 1.x DeviceStateNotify events, they
should receive them when a DeviceFocusIn event is generated. The code
to do this was there, but an incorrect test meant they were never being
sent.
The "type" passed in is the XI2 type, the XI1 type is in event.type.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CheckDeviceGrabs will activate a passive grab for KeyPress and
ButtonPress events. GrabInfoRec::activatingKey contains the keycode
which activated the passive grab, so we can deactivate it later in
ProcessOtherEvents.
Previously, CheckDeviceGrabs relied on its callers to set
activatingKey, which not all callers were doing (I'm looking at you,
ComputeFreezes). Just set it in CheckDeviceGrabs instead.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous XKB info was being returned instead of the current
one, producing inconsistent results between the latest events
and the modifiers/group returned by this call.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>`
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We don't modify "value", make it official.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan-de-oliveira@nokia.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Since FixUpEventFromWindow only uses the sprite trace to determine the
window stack, pass in a sprite instead of hardcoding the device sprite,
so we can deliver to windows other than the one currently containing the
sprite.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Swap flags for different-endian clients when delivering XI2
DeviceEvents.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
When we send BadValue back to the client for having invalid mask bits,
at least tell them what the (first) invalid bit was.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It is currently assumed that an event button delieved to a master device
corresponds to the slave button states. However, the event button is a
logical (mapped) slave button and slave button states correspond to
physical (unmapped) slave buttons. This leads to incorrect update of the
master button state and incorrect events devlivered to clients. Fix the
situation by taking the slave button map into account when querying a
slave button state.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=24887
Signed-off-by: Eoghan Sherry <ejsherry@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If any part of the stack calls XIGetKnownProperty during device shutdown
the property is re-initialized before the server generation resets, leaving
the value invalid again.
Move the reset to the extension init which happens before input devices are
initialized before the first property is requested.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
When getting close to the MAXDEVICES limit, the creation of XTEST devices
may fail due to device id exhaustion. In that case, fail the creation of
master devices too and return an error to the client.
Theoretically, we could alloc the MDs without the XTEST devices but that
will get interesting when a client starts sending XTEST events through those
devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
They were named ptr when everything was in one function to save one more
variable. Now that the stuff is split out, "dev" makes more sense.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
No functional changes, just code cleanup to improve readability.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
From the original bug reporter Ezra Reeves:
"I did some more digging on this today, and I found that an HP branded
wireless USB mouse has the same issue. With this mouse (as well as the
logitech wireless mouse), the return from:
xdev = XListInputDevices(GDK_WINDOW_XDISPLAY(rootwin), &ndevices_return);
lists the USB device twice, but both have xdev[num].use == 3
(IsXExtensionKeyboard as defined in X11/XI.h).
[...]
Swapping the order of the test in Xi/listdev.c that determines whether a
device is a pointer or a keyboard properly detects my devices (OEM USB
wireless mouse/kb combo) -- one as a keyboard and one as a pointer."
X.Org Bug 29046 <http://bugs.freedesktop.org/show_bug.cgi?id=29046>
Reported-by: Erik Kilfoil <ekilfoil@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We have per-axis mode now. For those bits that still need it (XI 1.x),
assume that the first axis holds the device's mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Previously the OutOfProximity bit in the valuator mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
After copying the unused_classes into the device, reset the original
pointer. Otherwise we have two pointers pointing to the same field and both
get freed on device removal.
Some classes already have this behaviour since 51c8fd69.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Same as the matching key functions. Buttons, like keys, can have two states
for down/up - one posted, one processed. Posted is set during event
generation (usually in the signal handler). Processed is set during event
processing when the event queue is emptied and events are being delivered to
the client.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The modifier key count is maintained by the XKB layer and
increased/decreased for all modifiers that set state.
Test case, MD/SD modifier key count in comment:
1. keyboard 1: press and hold Shift_L # SD:1 MD:1
2. keyboard 2: press and release Shift_L # SD:1,0 MD:1,0
<class copy happens> # SD:1 MD:1
3. keyboard 1: release Shift_L # SD:0 MD:1
4. keyboard 1: press and release Shift_L # SD:1,0 MD:2,1
The modifier is now logically down on the MD but not on keyboard 1 or
keyboard 2.
XKB is layered in before the DIX, it increases/decreases the modifier key
count accordingly. In the above example, during (2), the MD gets the key
release and thus clears the modifier bit. (3) doesn't forward the release to
the MD because it is already cleared. The copy of modifierKeysDown when the
lastSlave changes however increases the counter for the held key. On (4),
the press and release are both forwarded to the MD, causing a offset by 1
and thus do not clear the logical modifier state.
X.Org Bug 25480 <http://bugs.freedesktop.org/show_bug.cgi?id=25480>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
For absolute input devices (E.G. touchscreens) in multi-head setups,
we need a way to bind the device to an randr output. This adds the
infrastructure to the server to allow us to do so.
positionSprite() scales input coordinates to the dimensions of the shared
(total) screen frame buffer, so to restrict motion to an output we need to
scale/rotate/translate device coordinates to a subset of the frame buffer
before passing them on to positionSprite.
This is done here using a 3x3 transformation matrix, which is applied to
the device coordinates using homogeneous coordinates, E.G.:
[ c0 c1 c2 ] [ x ]
[ c3 c4 c5 ] * [ y ]
[ c6 c7 c8 ] [ 1 ]
Notice: As input devices have varying input ranges, the coordinates are
first scaled to the [0..1] range for generality, and afterwards scaled
back up.
E.G. for a dual head setup (using same resolution) next to each other, you
would want to scale the X coordinates of the touchscreen connected to the
both heads by 50%, and translate (offset) the coordinates of the rightmost
head by 50%, or in matrix form:
left: right:
[ 0.5 0 0 ] [ 0.5 0 0.5 ]
[ 0 1 0 ] [ 0 1 0 ]
[ 0 0 1 ] [ 0 0 0 ]
Which can be done using xinput:
xinput set-prop <left> --type=float "Coordinate Transformation Matrix" \
0.5 0 0 0 1 0 0 0 1
xinput set-prop <right> --type=float "Coordinate Transformation Matrix" \
0.5 0 0.5 0 1 0 0 0 1
Likewise more complication setups involving more heads, rotation or
different resolution can be handled.
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than always returning BadValue, associate an error status like
BadWindow with a resource type like RT_WINDOW, and return the
appropriate one for the requested type.
This patch only touches the core protocol resource types. Others still
return BadValue and need to be mapped appropriately.
dixLookupResourceByType can now return BadImplementation, if the caller
asked for a resource type that has not been allocated in the server.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Properties allocated through XIGetKnownProperty() aren't reset on the second
server generation but keep the old value. As a result, wrong Atoms are
supplied to the driver, resulting in potential data corruption or weird
error message.
Reproducible by running "xlsatom | grep FLOAT" twice on a plain X server.
The second X server generation won't have the FLOAT atom defined anymore,
despite the users of this atom not noticing any errors.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
In the process, fixes a memory leak in CloseDevice, and an unchecked
memory allocation in InitializePredictableAccelerationProperties.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Both dev and dev->button are already used before their checking were being
performed. So check on the beginning.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Error was introduced in 31a7994a. I.e., broken since 2007. I guess nobody uses
XSendExtensionEvent.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reintroduce a check which used to be there in the old
ProcessKeyboardEvent/ProcessPointerEvent codepath, which avoids us
recording events subject to a grab twice: once when it's first processed
in EnqueueEvent, and then again when it's thawed and being replayed.
This required a tiny amount of code motion to expose syncEvents.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The XI protocol spec only allows for two errors on the SetDeviceMode
requests: BadMatch or BadMode. BadMode however is a dynamically assigned
extension error and the driver doesn't have access to the actual error
number. Hence, if a SetDeviceMode driver returns an error other than
BadMatch, assume BadMode.
The two exceptions are BadAlloc and BadImplementations, pass these on to the
client (any request is allowed to return either of those).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
RECORD was disabled during the switch to internal events. This patch
modifies the record callback to work with internal events instead of
xEvents. The InternalEvents are converted to core/Xi events as needed.
Since record is a loadable extension, the EventTo* calls must be externed.
Signed-off-by: Chris Dekter <cdekter@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the indicator flags have the XkbSLI_IsDefault bit set, the indicator map
and names aren't their own bit of memory but rather point into the
device->key->xkbInfo->desc structure. XkbCopySrvLedInfo knows about this and
leaves the pointers alone.
When copying the classes from the slave to the master, these pointers are
copied and still point to the dev->key class of the slave device. If the
slave device is removed, the memory becomes invalid and a call to modify
this data (e.g. XkbSetIndicators) may cause a deadlock.
The copying of dev->key relies on dev->kbdfeed to be already set up. Hence
the pointers need to be reset once _both_ kbdfeed and key have been copied
into the master device.
X.Org Bug 25640 <http://bugs.freedesktop.org/show_bug.cgi?id=25640>
Fedora Bug 540584 <https://bugzilla.redhat.com/show_bug.cgi?id=540584>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Thoses definitions have been included in the kernel but the X server is not updated accordingly.
Without these definitions, the multitouch axes are not correctly labelled.
Signed-off-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Make sure to check return value before setting bitmask flags.
For most calls, just fails to init the extension. Since Xinput
already calls FatalError() on initialization failure, so does
failure to allocate Xinput's resource type.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Commit 0e6cee853d introduced cleanup code to
remove the accel properties when switching schemes. The same code is
triggered by the default closedown code but only after unconditionally
removing all device properties (as part of the cleanup). The properties,
although deleted never got reset to NULL.
X.Org Bug 25374 <http://bugs.freedesktop.org/show_bug.cgi?id=25374>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Andy Furniss <lists@andyfurniss.entadsl.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Trying to unregister property handlers during the device closure process
leads to invalid memory accesses.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Deleting a property that was not set on a device leads to a null-pointer
reference. The protocol allows deleting those properties - it has to be a
noop.
Reproducible:
xinput --set-prop "My device" --type=int --format=8 "my property" 1
xinput --delete-prop "My other device" "my property"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of returning BadAccess when "read" permission is denied
on a device, falsify the device state (buttons down, keys pressed).
This is nicer to applications, but may still have undesired side
effects. The long-term solution is not to use these requests in
event-driven code!
Requests affected: QueryPointer, QueryKeymap, XiQueryDevice.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Subpixel data in data_frac is stored as FP32.32, hence we need to get that
down again before adding it to the current value.
Reported-by: Thomas Jaeger
Tested-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The length field needs to include the bytes required for the valuators
(INT32) as well.
The reply length has the right value and since the valuator state is always
last, clients didn't notice the wrong offset.
Tested-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
For core and XI1 events, store the key_repeat flag in the sequence number
until TryClientEvents. The sequenceNumber is unset until TryClientEvents.
[Also thrown in, some random indentation changes. Thanks]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The pointer advanced 12 bytes too short. Rather unfortunate if both the code
and the test have the same bug.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bits above XI2LASTEVENT are invalid and cause in BadValues. These checks
must be performed anywhere where a mask_len parameter is given.
This patch also adds the missing checks to grab masks.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A grab mask provided in the request may be larger than the one used in the
server. Cut down to size before memcopying.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes crash if the first XISelectEvents has a zero sized event mask.
Fixes crash if the mask provided is larger than others->xi2mask[].
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
masks can be of arbitrary length. If the client did not initialize mask_len,
some sort of boundary check is needed to avoid running over memory.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that the Xi events are critical and should thus cause a flush to
the client when an input event is pending.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
A missing break meant that ButtonPress would fall through into
ButtonRelease, but luckily it appears to have been completely harmless.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This patch corrects a misnaming of XTest-related functions.
The extension itself announces itself as XTEST. Xtst is the library name
itself, but all library functions are prefixed by XTest. Same with the
naming in the server.
- Rename all *Xtst* functions to *XTest* for consistency with the library
and in-server API.
- Rename the "Xtst device" property to "XTEST device" for consistency with
the extension naming.
- Rename the device naming to "<master device name> XTEST device". The
default xtest devices become "Virtual core XTEST pointer" and "Virtual
core XTEST keyboard".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The extern declaration in xichangehierarchy.c was broken anyway.
This fixes a crash on creating a new master device.
Reported-by: Maxim Levitsky
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
buttons_size is necessary as WriteToClient swaps the buttons_len field,
resulting in the wrong number of bytes being written later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DCEs are now processed when sent throught the master device, not when sent
through the slave device. This includes a removal of some un-used (or partly
used) fields in the DCE itself to something more self-explanatory.
TODO: if a device has events queued and its attachment is changed, the DCE
is silently dropped now. Instead, it should be generated as soon as the
first event after the attachment is sent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The version in eventconvert.c was half broken and for some reason we ended
up with a second version in exevents.c (which works). Move it over to where
it belongs and call EventToXI2 instad of having a custom function for it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a new device posts an event while the DCE is in the queue, getting the
data from the device may result in invalid memory access.
X.Org Bug 23100 <http://bugs.freedesktop.org/show_bug.cgi?id=23100>
Unlike Enter/Leave events generated by a device pushing the pointer around,
a device doesn't change focus all by itself. It's a result of a
SetInputFocus call, a window becoming unviewable or a grab activating. As
such, the sourceid for focus events is always the deviceid itself.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Use enum EventType instead of ints. This requires a load of default
cases in various switch statements to silence compiler warnings.
Reported-by: Aaron Plattner
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XI1 only uses 7 bits for deviceids, bit 8 is used for the MORE_EVENTS flag
on the wire (when DeviceValuator events are required).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keysym grabs are tricky in the details, keycode grabs are known to work. So
for now, provide keycode grabs only.
Requires inputproto 1.9.99.15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xtst devices get this property assigned automatically so they can be
detected easily by a client.
The property is read-only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than storing a simple boolean in the devPrivate for XTest devices,
store the actual master device's id (since it is constant for the life of
the device anyway).
Callers should use GetXtstDevice now instead of digging around in the
devPrivates themselves.
This patch allows for a cleanup in the creation of new master devices since
GetMaster and GetXtstDevice spare the need for loops, IsPointer checks and
similar.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
The callers should need to use the dev privates key to look up xtest
devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
If the check fails, leave the device off the returned list of info
structures. Under XI2, this may cause inconsistent views of the device
topology after a change (for example, devices disappearing from view,
or showing as attached to a master that cannot be seen). More work is
needed to deal with topology changes and device relabeling.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Presumably, some intelligent, XI2-aware management app will be calling
XISetClientPointer on behalf of other clients; this check makes sure
the target client has permission on the device.
Requires changing the prototype to return status code instead of Bool.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
New access modes are being passed to the device access hook for XI2:
DixCreateAccess for creating a new master device;
DixAdd/RemoveAccess for attaching/removing slave devices to a master; and
DixListProp/GetProp/SetPropAccess for device properties.
Refer to the XACE-Spec document in xorg-docs, section "Device Access."
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Master devices provide the union of all attached slave devices' buttons,
i.e. the number of buttons on the master device is always the number of
buttons of the slave device with the highest number of buttons. When slaves
are attached or detached, the master device adjusts the button number to
reflect the new buttons.
On a slave switch, this slave's button labels are copied into the master (up
to slave->num_buttons). The remaining button labels (if any) stay as they
are. Thus, if any of the higher buttons is still pressed, it reflects the
label of the last pressed device that provided this button.
If two devices press the same button and it is differently labelled the last
pressed one will be reflected in the master device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous code would always skip the last valuator due to a wrong
upper boundary in the loop. last_valuator is the index of the last set
valuator - which also means it must be initialized to -1, not 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some files (notably those merged with MPX before XI2 came along) didn't use
a 'xi' prefix. This patch changes all of them to meaningful names.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If SetClientPointer fails, the only reason may be that the device is not a
pointer or that the device is an SD. Return BadDevice instead of BadAccess.
(BadAccess is a leftover from the early times of the ClientPointer
implementation when only one client was allowed to set it).
If the window parameter doesn't name a valid window or client, return
BadWindow.
Finally, allow both master keyboards and master pointers as deviceid.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was quite old code and can be streamlined a bit. The new code is
essentially the same as in ProcXISetClientPointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Swapping the mask_len and then advancing the pointer by the swapped length
is just a bad idea.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The maximum number of bytes is calculated by the mask len, and the mask len
is always in 4-byte units. XI2MASKSIZE however is in bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
zero-length masks are supposed to clear the device's mask.
ProcXISelectEvents passes these masks through directly, so we need to clear
the bits here if such a mask is supplied.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The data is already swapped before, so we just post it to the client as-is,
without attempting to swap it again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
inputstr includes XI2proto.h for the sole purpose of XI_LASTEVENT.
However, using XI_LASTEVENT in the server is prone to errors, if the server
is recompiled against a newer version of the protocol it would bump this
variable and associates bits, including potential ABI.
This patch defines an XI2LASTEVENT for use in the server and removes the
XI2proto.h require. XI2LASTEVENT is the current value of XI_LASTEVENT.
This patch is required by components that require access to inputInfo
(currently xf86-video-geode and xf86-video-cirrus) but should not have a
require for the XI2 protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Two issues that combined to false positives and false negatives.
- The checking for invalid bits must be performed when there are enough bits
that an event outside of LASTEVENT may be selected.
- The first invalid bit is LASTEVENT + 1, not LASTEVENT.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The protocol allows for 16 bit device ids, but the implementation doesn't
yet. We need to break the input ABI once more to shift the DeviceIntRec's
CARD8 to a CARD16, along with some changes in the privates.
Once that is done, revert this patch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The server returned the minimum of major/minor each instead of the lower of
the combined major.minor version. As a result, a client reporting
3.0 and a server supporting 2.7, the return value would be 2.0 (the minimum
of both).
Reported-by: Rémi Cardona
Reported-by: Simon Thum
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XIQueryVersion must return the client's version if the client's version is
lower than or equal to the server's version, or the server's version
otherwise.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
86077f0058ce88ee9b3df5d1ab854eeca43 switched from a boolean to a grabtype
enum. ProcXGrabDevice didn't switch with it. PickPointer during an XI grab
on a slave device would thus return a wrong (or NULL) device and crash the
server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
