Follow-up to 4971315296. countValuatorEvents was copied from GKVE where it
was obviously broken but nobody noticed. GPE had the correct version, but that
one got lost during de-duplication. Restoring the correct calculation - if we
have 6 valuators, we want 1 valuator event, not 2.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Rather than assuming rules in the CoreKeyboardProc, init the default rules in
InitCoreDevices, then re-use them later.
In the xfree86 DDX, set the rules to "base" or "evdev", depending on whether
we'll load kbd or evdev.
If we create a new MD, use pc105,us as default and re-use the rules file used
previously.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The device's button down state array was changed to use DOWN_LENGTH and thus
bitflags for each button in cfcb3da7.
Update the DBSN events to copy this bit-wise state.
Update xkb and Xi to check for the bit flag instead of the array value.
Reported by ajax.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
libXfont has stubs for these symbols, so, when compiling with hidden
symbols by default, these symbols must be visible in the X Server, or
the stubs in libXfont will be used.
I merged the wrong patch. See correct patch at:
http://lists.freedesktop.org/archives/xorg/2008-November/040540.html
Not activating the device before attempting to enable it would leave the
sprite unset, crashing the server when enabling the real devices.
This reverts commit e078901a4e.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This prevents a protocol visible side-effect (XVisibilityEvent) on
XCompositeRedirectWindow() followed by a XCompositeUnredirectWindow().
The problem shows up in gnome-screensaver with compiz and "unredirect
fullscreen windows" enable. A VisibilityNotify event is generated (first
with obscured and than with unobscured) when the window swithces from
redirected to unredirected.
https://bugs.freedesktop.org/show_bug.cgi?id=18133http://launchpad.net/bugs/278112
As proposed by Owen Taylor [1], the enter-leave event model needs to adjust
the events sent to each window depending on the presence of pointers in a
window, or in a subwindow.
The new model can be summarised as:
- if the pointer moves into or out of a window that has a pointer in a child
window, the events are modified to appear as if the pointer was moved out of
or into this child window.
- if the pointer moves into or out of a window that has a pointer in a parent
window, the events are modified to appear as if the pointer was moved out of
or into this parent window.
Note that this model requires CoreEnterLeaveEvent and DeviceEnterLeaveEvent to
be split and treated separately.
[1] http://lists.freedesktop.org/archives/xorg/2008-August/037606.html
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
FirstPointerChild: Return the first child that has a pointer within its
boundaries.
FirstPointerAncestor: return the first ancestor with a child within its
boundaries.
These are required for the updated enter/leave model.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Device events always need to be delivered, core events only in some cases.
Let's keep them completely separate so we can adjust core event delivery.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We need them for each window, every time a window is allocated. Storing them
in a devPrivate is the wrong thing to do.
This also removes the unused ENTER_LEAVE_SEMAPHORE_ISSET macro.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
grab == devgrab anyway, this is a leftover from the time when we had two
different grabs per device (core and XI grab).
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Really, this was a bad idea. It's not security, the UI features that would
have been cool (e.g. clicking through windows) aren't implemented anyway, and
there's nothing you can't achieve just by using plain XI anyway.
Requires inputproto 1.9.99.6.
EnableDevice and DisableDevice both change the property too.
And enabled must be set to FALSE in AddInputDevice, the device is not enabled
yet.
X.Org Bug 18111 <https://bugs.freedesktop.org/show_bug.cgi?id=18111>
dev->enabled is a Bool. Bool is two bytes.
BOOL on the other hand is a protocol type and always 1 byte. So copy the value
into the one-byte type before passing it into XIChangeDeviceProperty.
Found by Michel Dänzer.
X.Org Bug 18111 <http://bugs.freedesktop.org/show_bug.cgi?id=18111>
The current code exposes to inconsistent updates, i.e. if handler N succeeds
but handler N+1 fails in setting the property, an error is returned to the
client although parts of the server now behave as if the property change
succeeded.
This patch adds a "checkonly" parameter to the SetProperty handler. The
handlers are then called twice, once with checkonly set to TRUE.
On the checkonly run, handlers _MUST_ return error codes if the property
cannot be applied. Handlers are not permitted to actually apply the changes.
On the second run, handlers are permitted to apply property changes.
Errors codes returned on the second run are ignored.
For two axes [a, b] and [x, y] (inclusive), the formula to scale point P(ab)
to (x,y) is:
(P - a)/(b - a) * (y - x) + x
And the whole end result rounded of course to get the integer we need.
It's not especially obvious, and unpleasantly overloaded for the Xnest
case. Typically this gives you a server that looks for its auth data in
the authority file you were using for the running X session, which
generally doesn't have an entry for the display you just started.
All the major dm's, and startx, pass -auth explicitly, so this shouldn't
cause too much upheaval.
A property can only be deleted if any of the following is true:
- if a property is deletable and all handlers return Success.
- if a property is non-deleteable and the all handlers return Success AND the
delete request does not come from a client (i.e. driver or the server).
A client can never delete a non-deletable property.
Now that the code has been fixed so that Unmap means unmap and not "don't
remap", 'remap' was confusing to have in the function names/parameters, so
change it to simple 'map'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Since ReparentWindow() does a unmap/map pair for windows that are already
mapped, for saveset windows with SaveSetUnmap, we must unmap the window
before calling ReparentWindow() to avoid the generation of MapRequest
events, and so forth.
For master devices, the ptraccel code could segfault on free since we'd be
dereferencing random memory. Callocing the valuatorClassRec is the easy fix.
This removes yet another xalloc() each server generation. Also, I
couldn't find the corresponding xfree() so I guess that used to be a
memory leak there.
Two corrections
1. the "detail" field has NotifyVirtual, etc., not the "mode" field. This was
a clear bug.
2. don't set/unset the flags for NotifyGrab or NotifyUngrab. Clients are
expected to deal with multiple enter/leave events per window if the mode is
not NotifyNormal.
Testable with TCL menu boxes (such as used in gitk):
tk_optionMenu .menu globVar Val1 Val2 Val3 ValJunk
pack .menu
Thanks to Michel Dänzer for pointing this out.
Unplug a mouse, then warp the pointer and the warp pointer code will try
to update the position of the last slave device associated with the
master. That pointer will be stale and the X server will crash.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was to account for cases where you had video and print screens in
the same server. Lunacy. Leave the slot in ScreenInfo, but rename it,
and stop looking at it.
Add strncasecmp (as we're now using it) in case someone doesn't have it,
and also change strncasecmp args to be const, in accordance with
everything else.
In the map stored in each keyboard device, the first line refers to
minimum keycode, i.e., the 0th line refers to keycode 8. When not
using XKB the wrong test caused some keys to be interpreted as
locks ('m' for instance). The had to be pressed twice to generate
both KeyPress and KeyRelease events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We may need more than one handler to deal with a property (e.g. one in the
driver, one in the DIX), so get the handlers into a linked list and call them
one-by-one. This is of course slightly less entertaining than the hilarious
WRAP/UNWRAP game we play in other parts of the server.
XIRegisterPropertyHandler/XIUnregisterPropertyHandler are the interface
drivers/the DIX should use to attach themselves to the device.
XIDeleteAllDeviceProperties destroys everything, including the handlers.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
This fixes a severe issue - when the client died the event mask didn't get
unregistered and a future event would dereference dangling pointers. By
storing the event masks in the resource system we can free them when the
client dies.
Using id = 0 only worked pre-MPX since XInput didn't allow XOpenDevice for the
core devices (0 and 1). Now we can now legally register for events so we may
overwrite our device-independent classes with the ones selected for the VCP.
So, increase the EMASKSIZE to MAX_DEVICES + 1 and use MAX_DEVICES as the ID
when we don't have a device.
Mixing usage where some parts of the code treated this field as a bitmask
and other parts as an array of card8 was wrong, and as the wire protocol
wanted bitmasks, it was less invasive to switch the newer counting code use
booleans.
Master devices track slave buttons by waiting for all slave buttons to be
released before delivering the release event to the client.
This also removes the state merging code in DeepCopyDeviceClasses -- that
code was changing master device state without delivering any events,
violating protocol invariants. The result will be that existing slave
button state which does not match the master will not be visible through the
master device. Fixing this would require that we synthesize events in this
function, which seems like a bad idea. Note that keyboards have the same
issue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Dereferencing into dev->valuator could crash the server, although it looks
like I could only reproduce this by having a keyboard send an event after it
was created and the WM was still replaying. Or so.
device->button->down used to be a 32-byte bitmask with one bit for each
button. This has changed into a 256-byte array, with one byte assigned for
each button. Some of the callers were still using this array as a bitmask
however, this is fixed with this patch.
Thanks to Keith Packard for pointing this out. See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036202.html
Button events were mapped once in GetPointerEvents and then again in
UpdateDeviceState. While it might make sense to just fix up UpdateDeviceState,
it turns out to be better to leave the raw button number in the event because
DGA reports raw device events without button translation, and so when it calls
UpdateDeviceState, the button down counts get scrambled and buttons get stuck
down.
See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036201.html
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
RealizeCursor should be called when the cursor is allocated. However, when the
root cursor is allocated, no devices exist yet, and thus RealizeCursor is
never called. This may lead to segfaults lateron in DDXes like Xnest that
actually need to do something for each cursor, and lateron rely on that
DDX-specific data for each cursor has been initialized.
We only have one set of default rules options in xkb. When the second keyboard
is brought up with Xkb options specified, these new options overwrite the old.
In future server generations, the rules used for the VCK are a mixture of the
default ones and ones previously specified for other keyboards. Simply
resetting the xkb default rules to NULL avoids this issue.
Reproducable by setting XkbLayout "de" and XkbVariant "nodeadkeys". In the
second server generation, the VCK has "us(nodeadkeys)". This again produces a
SIGABRT when the first key is hit.
I could not figure out why the SIGABRT happens. This patch is avoiding the
issue rather than fixing it.