Often we want to apply a driver specific option to a set of devices and
don't care how the driver was selected for that device. The MatchDriver
entry can be used to match the current driver string:
MatchDriver "evdev|mouse"
Option "Emulate3Buttons" "yes"
The driver string is a case sensitive match.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently when there multiple InputClass entries of the same type, only
the last entry is used and the previous ones are ignored. Instead,
multiple entries are used to create multiple matching conditions.
For instance, an InputClass with
MatchProduct "foo"
MatchProduct "bar"
will require that the device's product name contain both foo and bar.
This provides a complement to the || style matching when an entry is
split using the "|" token.
The xorg.conf man page has added an example to hopefully clarify the two
types of compound matches.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.
The operating system name is the same as `uname -s`, and matching is
case-insensitive.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch adds documentation for the DefaultModes monitor option
added in the previous patch.
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
These drivers have been deactivated for over a year now, let's not refer
potential users to them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In addition to the conf files found in /etc/X11 or $sysconfdir/X11 used
for local administration, we also reserve a system directory for vendor
and package usage. The simple search path is:
/usr/share/X11/xorg.conf.d
$datadir/X11/xorg.conf.d
Files from these directories will have the lowest config priority. The
directory $datadir/X11/xorg.conf.d is exported from xorg-server.pc in
the variable "sysconfigdir". Packages should install their .conf files
to the directory specified by:
`pkg-config --variable=sysconfigdir xorg-server`
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no reason to carry all the oddities from xorg.conf like appended
hostname to the search path for xorg.conf.d. This changes it to something
very simple:
/etc/X11/<cmdline>
$sysconfdir/X11/<cmdline>
/etc/X11/xorg.conf.d
$sysconfdir/X11/xorg.conf.d
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Explain the "safe" path dance for -configdir, too.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add $(AM_V_GEN) for sed-based rules so they appear as expected with
automake silent rules, and $(AM_V_at) to completely hide cp/ln/rm
commands which are not prone to fail.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Currently the config and InputClasses are merged together so that the
options from the config backend have the highest priority. This is bad
since it means options such as a default XKB layout set by the backend
cannot be changed by the user.
This patch changes order of precedence to be:
1. xorg.conf
2. xorg.conf.d (later files have higher priority)
3. config backend
In order to allow this ordering, the config parsing has been changed to
read the xorg.conf.d files before xorg.conf. This has the consequence
that the core device picking which looks for the first InputDevice may
not find it in xorg.conf.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tags may be a list of comma-separated strings that match against a MatchTag
InputClass section. If any of the tags specified for a device match against
the MatchTag of the section, this match is evaluated true and passed on to
the next match condition.
Tags are specified as "input.tags" (hal) or "ID_INPUT.tags" (udev), the
value of the tags is case-sensitive and require an exact match (not a
substring match).
i.e. "quirk" will not match "QUIRK", "need_quirk" or "quirk_needed".
Example configuration:
udev:
ENV{ID_INPUT.tags}="foo,bar"
hal:
<merge key="input.tags" type="string">foo,bar</merge>
xorg.conf:
Section "InputClass"
Identifier "foobar quirks"
MatchTag "foo|foobar"
Option "Foobar" "on"
EndSection
Where the xorg.conf section matches against any device with the tag "foo"
or tag "foobar" set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
In order to keep the number of InputClass sections manageable, allow
matches to contain multiple arguments. The arguments will be separated
by the '|' character. This allows a policy to apply to multiple types of
devices. For example:
Section "InputClass"
Identifier "Inverted Mice"
MatchProduct "Crazy Mouse|Silly Mouse"
Option "InvertX" "yes"
EndSection
This applies to the MatchProduct, MatchVendor and MatchDevicePath
entries. Currently there is no way to escape characters, so names or
patterns cannot contain '|'.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Sometimes it is desirable to skip adding specific input devices to the
server. The "Ignore" option is used similarly to Monitor sections so
that matched devices will not be added. BadIDChoice is returned to the
config backend so that it will clean up all resources.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Drivers and options specified in InputClass sections work on a "first
match wins" strategy. Let's be consistent when documenting it.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With InputClass support, it makes more sense to cover all
aspects of acceleration in options. Previously, one could only set the
default on the command line.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Any input device with this option will be automatically added to whichever
server layout is selected at startup. This removes the need to reference a
device from the ServerLayout section. The two following configuration are
identical:
CONFIG 1:
Section "ServerLayout"
InputDevice "foo"
EndSection
Section "InputDevice"
Identifier "foo"
...
EndSection
CONFIG 2:
Section "InputDevice"
Identifier "foo"
Option "AutoServerLayout" "on"
...
EndSection
The selection of the server layout affects both explicitly specified
layouts and the implicit layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp at keithp.com>
Add a new command line parameter, -configdir, to specify the config
directory to be used. Rules are the same as -config for root vs. user
privileges.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Reshuffle and reword - InputDevice sections are only necessary if
hotplugging is disabled. Put more emphasis on hotplugging and less on HAL
since we'll switch backends eventually.
CorePointer, CoreKeyboard, and AlwaysCore should be listed as deprecated
since they don't do what they used to since 1.4. These days, only
SendCoreEvents matters and it's enabled for any driver calling
xf86ProcessCommonOptions (== every driver).
It only controls the startup behavior too, so document this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
SpecialKeyHandling was removed from the kbd driver with version 1.4.0. Since
this is the only version that will build against server 1.7+ it's not
reasonable to mention it in the man page. Reword, point to XKB instead and
make clear that some key combinations _may_ not be available in any given
config.
Reported-by: Derek Fawcus
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
1.7 always shipped with DontZap disabled, it's just the default keymaps that
may not include the symbol to trigger it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Boolean option to enable/disable SIGIO handlers is set by the first
of these found:
- UseSIGIO option is set in xorg.conf ServerFlags
- Default set at build time by ./configure --enable-use-sigio-by-default
- Platform default value: Solaris = no, all others = yes
This matches the current settings on all platforms except Solaris.
This reverts Solaris (for now) to the settings used in Xorg 1.6, before
SIGIO support for Solaris was added, due to some system level bugs that
won't be resolved in time for Xorg 1.7 release, but allows us to enable
when those are resolved (or when we need to test if they're resolved).
See http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6879897
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
AllowMouseOpenFail description changed to reflect actual behaviour
and point to AllowEmptyInput for previously described behaviour.
Update default DPMS mode timeouts to match new defaults set
in April 2009 by commit d52fddefae
Update autoloaded module list to match ModuleDefaults in xf86Config.c
Update module subdir list to match stdSubdirs in loadmod.c
Add xorg.conf options that were added to the code:
- XkbDir option added in February 2009
by commit 76f18b94bd
- DRI2 option added in April 2008
by 35982bc109
Remove xorg.conf options that were removed from the code:
- XkbDisable option was removed in January 2009
by commit 40877c6680
- PciProbe/Config options were removed in August 2008
by commit fdf7c747a8
- EstimateSizesAggressively was removed in August 2008
by commit cd1e8f2614
- loadable font modules were removed in July 2008
by commit affec10635
- ModInDev options were removed in December 2008
by commit 6de6ffff35
(Also strips some trailing whitespaces to make git happier.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Inside a windowing system, it's not the place to probe for devices. Goodbye
-probe and -probeonly.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Such stupid and ugly way to dump PCI information! Oh boy... Anyway, this
doesn't belong to the X server at all. Go away!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This was a vestige from the days before we'd make the mode list from the
EDID data, and from CRT technology when you could reasonably assume that
higher refresh rates were better. Also it did not function as advertised,
acting as a high-pass filter instead of a band-pass.
Zapping is triggered by xkb these days, so note in the man page that it's the
Terminate_Server action. Since it's XKB, personal preferences towards or
against zapping should be achieved through xkb rulesets.
If Terminate_Server is not in the xkb actions, then we can't zap anyway and we
don't need a default of DontZap "on".
This patch restores the old meaning of DontZap - disallow zapping altogether,
regardless of XKB's current keymap.
Ideally, this patch should be accompanied by b0f64bdab00db652e in
xkeyboard-config.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Extensions section was added in X11R6.8.0 and documented in the release notes:
http://www.x.org/archive/X11R6.8.0/doc/RELNOTES2.html#3
but never made it into the man page.
Also fix a bonus typo.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
- Remove remaining references to XFree86-Misc options AllowNonLocalModInDev
and DisableModInDev.
- Remove remaining references to grab-breaking keys & associated options.
- Update description of Ctrl-Alt-Backspace to new -retro/DontZap defaults.
- Add description of new options -modalias and -showopts.
- Update list of modules loaded by default.
- Update input driver references from keyboard to evdev & kbd.
- Update list of driver man pages to match xf86-*-* drivers with man pages.
- Add See Also section to exa man page.
and various formatting/typo/etc. fixes.
The Xorg/xorg.conf sections on input device selection could use further
updates to better match the current state of HAL-enabled configuration.
This consists of two parts:
In the implicit server layout, ignore those drivers when looking for a core
device.
And after finishing the server layout, run through the list of devices and
remove any that use mouse or kbd.
AEI is mutually exclusive with the kbd and mouse drivers, so pick either - or.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>