The GLX section of configura.ac checks the state of DRI2, so it
needs to be after DRI2=auto is resolved.
Also reset libgl requirement to 7.1.0 in non-dri2 case.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This gets the server to link with xshmfence again, and also ensures
that the miSyncShm code is linked into the server with the reference
from sdksyms.
Signed-off-by: Keith Packard <keithp@keithp.com>
The selection of which clock to use for this function was not actually
getting used when fetching the final clock value.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
APM support in the Xserver was used to restore the console mode
prior to a power management event. This was to ensure the mode
upon suspend/resume was one that the system firmware or kernel
could deal with.
APM support is now largely obsolete, KMS drivers don't require a
mode restoration anyhow. Therefore it should be possible to disable
this feature.
(small modification by keithp - move test for XF86PM flag after check
for APM, then move XF86PM flag to xorg-config.h.in)
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ProcessInputEvent() resets the device idle times. If idle time was higher than
the lower bracket, this should trigger an event in the idle time wakeup
handler.
If processing is slow, the idle time may advance past the lower bracket
between the reset and the time the BlockHandler is called. In that case, we'd
never schedule a wakeup to handle the event, causing us to randomly miss
events.
Ran tests with a neg transition trigger on 5ms with 200 repeats of the test
and it succeeded. Anything below that gets a bit tricky to make sure the
server sees the same idle time as the client usleeps for.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
ACPI support in the Xserver was used to restore the console mode
prior to a power management event. This was to ensure the mode
upon suspend/resume was one that the system firmware or kernel
could deal with.
The feature depended on acpid to be running. Most of this functionality
is now take over by systemd, KMS drivers don't require a mode restoration
anyhow. Therefore it should be possible to disable this feature under
some circumstances.
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
A call to Xrandr SetScreenConfig (for randr 1.1) causes the Xserver to
crash when xf86SetViewport() which does not check if the hardware is
accessible.
Wrap accesses to xf86SetViewport() with if (vtSema) { ... } to avoid that.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When enabling/disabling input handlers in xf86VTSwitch() we treat Input-
and GeneralHandlers equally. The result is that after a VT switch the
masks for EnabledDevices and AllSockets are equal and the distiction
between both types is lost.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
EDID sometimes lies about screen sizes. Since the screen size is used
by clients to determine the DPI a wrong ration will lead to terrible
looking fonts.
Add a sanity check for the h/v ratio cutting off at 2.4. This would
still accept the cinemascope aspect ratio as valid.
Also add message suggesting to add a quirk table entry.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DMPS calls dixSaveScreens() when turned off but not when turned
on. In most cases this is irrelevant as DPMS is done when a
key is hit in which case dixSaveScreens() will be called to
unblank anyhow. This isn't the case if we use xset (or the
DPMS extension directly) to unblank.
Check screenIsSaved to make sure the state needs to be changed
before calling dixSaveScreens().
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The fb layer of X can't deal with strides that are not a multiple of
4, so when Xephyr allocates its own framebuffer it should make sure to
align it.
This fixes crashes and rendering corruption when Xephyr runs in a
depth that is different from the host X server and its screen size is
not a multiple of 4 / depth. (This is particularly easy to trigger if
you use the -resizeable option).
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the depth of the Xephyr server matches that of the host X server,
Xephyr simply uses the buffer associated with the XImage as its
framebuffer. In this case, it is correct to get the bits_per_pixel and
bytes_per_line values returned from hostx_screen_init() from the XImage.
However, when the depth doesn't match the host, Xephyr uses a private
framebuffer that is periodically copied to the XImage. In this case,
the returned values of bits_per_pixel and bytes_per_line should be
those of the private framebuffer, not those of the XImage.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
After fc3ab84d the pVideo field in DevToConfig[i] is no longer
initialized, so it's always NULL. This causes the duplicate finding
algorithm in the beginning of the function to not work anymore as it
is based on this field.
The symptom of this bug is that X -configure reports
Number of created screens does not match number of detected devices.
Configuration failed.
Server terminated with error (2). Closing log file.
rather than producing a working config file.
This patch fixes that bug by initializing the field before calling
xf86PciConfigureNewDev().
Cc: tvignatti@gmail.com
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Well, that was lame. The problem with reporting y inversion honestly is
that libGL asks the driver _its_ opinion of Y inversion, which it just
fabricates from whole cloth. So then when libGL goes to compare the
driver's idea of fbconfigs with that of the server - a fairly dumb idea
to begin with - nothing matches, and direct rendering fails, and
sadness.
So until the DRI drivers are fixed we should just continue to lie about
Y inversion. GLX_DONT_CARE is what libGL would make up for that
attribute if we hadn't sent it, so just send that instead.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Provides both a software implementation using timers and driver hooks
to base everything on vblank intervals.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds DRM compatible fences using futexes.
Uses FD passing to get pixmaps from DRM applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This passes a file descriptor from the client to the server, which is
then mmap'd
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds two interfaces:
void SetReqFds(ClientPtr client, int req_fds)
Marks the number of file descriptors expected for this
request. Call this before any request processing so that
any un-retrieved file descriptors will be closed
automatically.
int ReadFdFromClient(ClientPtr client)
Reads the next queued file descriptor from the connection. If
this request is not expecting any more file descriptors, or
if there are no more file descriptors available from the
connection, then this will return -1.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There was a check to avoid smashing custom functions, but the sense
was backwards causing it to always smash them, and also not set them otherwise.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allocates a new region structure and copies a source region into
it in a single API rather than forcing the caller to do both steps themselves.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This data structure is required to use shared memory objects in any
extension. That includes the Xv extension, which (before this patch)
duplicated the definition of this structure in its own code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
94ed0ba1b5 moved backtracing into the DIX, so
this comment is outdated. since no-one noticed and it's easier to just grep
than update file references, remove the comment.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
We're Y-inverted from GL's coordinates, so this is correct. gnome-shell
doesn't seem to check this - somewhat reasonable since the only server
that answered the other way around was Xglx - but kwin does, and
upside-down hilarity ensues.
Tested-by: maelcum on #xorg-devel
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
KdScreenInfo is constructed at server startup time, and not
re-generated at server reset time. Freeing the 'driver' element at
reset time means this information is lost, and the server crashes
pretty quickly afterwards.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Consider all attached output providers when looking for changed outputs and
crtcs.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Send RRResourceChangeNotify event when provider, output or crtc was created or
destroyed. I.e. when the list of resources returned by RRGetScreenResources and
RRGetProviders changes.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Send RRProviderChangeNotify event when a provider becomes output source or
offload sink.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix Automake warning: AC_OUTPUT should be used without arguments.
www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Files
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Setting POINTER_SCREEN with a unset valuator mask causes a jump to 0/0. Set
the flags to 0 so we don't generate any motion on a button event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
As of server 1.13, systems with DRM and Udev will have BUS_PLATFORM as
their primary bus type. However, drivers not implementing a
platformProbe function will still create entities of type BUS_PCI. We
need to account for this when checking for the primary entity.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Acked-by: Tormod Volden <debian.tormod@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>