Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Additionally removes some dead code and fixes double-locking in
xprIsX11Window. xprIsX11Window doesn't need to do any locking because
those resources are protected by the called functions themselves.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel A. Steffen <dsteffen@apple.com>
Currently, we only end up here through a call to QuartzShowFullscreen, and
this is always on the same thread. Future changes (such as further
incorporating libdispatch) may allow this to change, but contention will
remain minimal since the call is infrequent and it is short held.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel A. Steffen <dsteffen@apple.com>
It's been a few years now since we've needed this to debug thread
boundaries, so punt it out to clean up the namespace polution.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
xorg_backtrace() has been in os for two years now, we might as well
start using it.
Ref: 94ed0ba1b5
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
xprAppleWM.c:143: warning: initialization from incompatible pointer type
xprAppleWM.c:144: warning: initialization from incompatible pointer type
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Previously, we weren't always waiting the full three seconds. This should
be better, but is still sub-optimal. We really want to start processing
these once a WM has been started.
http://xquartz.macosforge.org/trac/ticket/416
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
All the implementations of makeCurrent and forceCurrent are identical,
so just use makeCurrent everywhere.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We can never hit this, because the indirect GLX dispatch code always
forces a current context and checks that it's non-NULL before calling
into the dispatch table. If it's _not_ null, then _glapi_set_context
will call into the driver, which is responsible for calling
_glapi_set_dispatch to make sure the dispatch table is non-NULL.
Also remove _glapi_set_warning_func and friends, since we can no longer
call them even from dead code.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
each DDX has its own copy, I've taken the darwin one,
though I'm not sure why it needs the pOldClip piece that nobody
else has and the commit msg is like an "Updates from magic land"
type message.
This removes the main uses of pWin->winSize from the DDXen.
v2: drop old clip like ajax suggests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the struct, but keeps InitAbsoluteClassDeviceStruct as
a no-op and preserves related struct layout.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We now support using RandR to set the resolution of the primary display (and
place a shielding window on other displays) in multi-monitor configurations.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
We get an XP_EVENT_DISPLAY_CHANGED event when our display configuration is
changed. If this change was caused by hotplugging a monitor or Mac Display
Preferences changes by the user, we need to call RRScreenSizeNotify in order
to ensure new connections get the correct screen size.
http://xquartz.macosforge.org/trac/ticket/460
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
The CoreAudio path uses deprecated API and has reported crashes that
aren't worth fixing (4e8bf12b13 fixed
one and introduced another). NSBeep() does the job just fine.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This just fixes the regression whereby we couldn't switch between the legacy
fullscreen mode and rootless on multi-monitor configurations. This was
happening because ref wasn't being set in these cases (since we don't ever
actually change CG modes), so we failed a CFEqual. Setting the references
fixes this regression and places us one step closer to more mode RandR
mode switching in multi-monitor configurations.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Never implemented in any open source driver. The implementation
assumed explicit DDX driver knowledge of how the client-side driver
worked, since at the time the server's GL renderer was not a DRI driver.
But now, it is, so any implementation of these should be done with
additional DRI driver API, like the swap control extension.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The version check is hackish, and I highly doubt anyone using this code is on
a version of OS X that predates this support (10.2 has support for it).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Adds three new functions
void QuartzRandRSetFakeRootless (void);
void QuartzRandRSetFakeFullscreen (void);
void QuartzRandRToggleFullscreen (void);
The first two are identical to requesting the fake modes from a RandR client
The third responds to cmd-alt-a to leave fullscreen or RandR.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Report a fake screen mode that corresponds to the screen mode at startup of the
server excluding the height of the menu bar. If a client requests this mode,
rootless mode is enabled. In all other modes, the root window is shown.
Signed-off-by: Jan Hauffa <hauffa@in.tum.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Querying and changing of resolution and refresh rate is supported,
rotation is not implemented yet.
Signed-off-by: Jan Hauffa <hauffa@in.tum.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Some functions had to be moved around due some missing static definitions.
Another minor clean up like inexistent function declarations and etc were made
also.
Part of this patch was cooked using:
sed -i -e '/static DISPATCH_PROC*.*;/d' `git ls-files`
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Jeremy deleted rootlessAccelInit's implementation in 2008 in commit
587c010a1c. Delete its prototype and the
remaining commented-out call to it.
It still makes sense for the rootless GC ops to relax the planemask, but
that's independent of the size of the operation, so quit checking the
thresholds there.
FillBytes and CompositePixels are not called anywhere, so delete
everything related to both.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
The driOps field of this structure is never set to anything but
&driGCOps, and this structure is not visible outside this source file.
Just use the constant in the one place the field was used.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We still have the issue with not raising the frontmost window for the case
when spaces is enabled, and the AppleSpacesSwitchOnActivate preference is
disabled.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
We were incorrectly NULLing out pDraw in __GLXDrawable instead of ours in
__GLXAquaDrawable. (we should refactor to eliminate this redundancy later)
This was causing http://xquartz.macosforge.org/trac/ticket/426
This was benign until commit f0006aa58f
The root cause of this change was fed7ccc481ad1caaa518cafe944c2327a5d0b6c65
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
