Replace useless #if 0/ErrorF/#endif with winDebug
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix winShadowUpdateDD(|NL) so we don't try to blit to primary surface if it didn't get allocated
(Intel drivers, in particular, seem to like to issue a WM_DISPLAYCHANGE during a suspend/resume
cycle, but not allow surface to be allocated right then)
Also:
Use winReleasePrimarySurfaceShadowDD(|NL) in winFreeFBShadowDD(|NL) rather than open coding it
Don't mess about recreating surface if we're going to resize it anyhow
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Make ShadowGDI drawing engine only change the size of the screen
pixmap/shadow framebuffer on an RANDR change, not the bpp/depth
as well.
The server requires the screen pixmap's depth to be invariant.
Other drawing engines aren't quite as affected by this issue as
they won't draw to the display, if it has changed colour depth,
but probably still need some attention.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
This is only relevant to pre-NT versions of Windows, which are all EOL.
Also, it's in the wrong place now as framebuffer can get resized.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Fortunately, these swapped constants are benign as they have the same
value, 0
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Don't turn off -multiplemonitors when all monitors don't have the
same pixel format and when using shadow GDI engine, just warn that
performance may be degraded
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
When RANDR resizing is enabled, generate an internal RANDR change when
WM_DISPLAYCHANGE occurs in rootless modes for screens which occupy an
entire monitor or the virtual desktop.
Store the monitor number and use that to handle WM_DISPLAYCHANGE for a
screen specified with '-screen @monitor'
In rooted mode, WM_DISPLAYCHANGE isn't relevant (except where display
depth changes may cause problems). (A maximized screen window will get
WM_SIZE to adjust it to the new monitor size)
In rooted fullscreen mode, WM_DISPLAYCHANGE shouldn't be seen, as we
have the resolution we have selected for the fullscreen session)
(Could client randr requests be handled in fullscreen to cause a change
of the fullscreen resolution? )
Don't bother do a RANDR resize if the dimensions aren't actually changing
when WM_DISPLAYCHANGE is sent (should handle WM_DISPLAYCHANGE to size 0x0
that the intel driver seems to like to send)
Various debug output improvements
Also, remove the note that XWin can't handle display mode changes from
the man page
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
To avoid recursion, WM_SIZE requests shouldn't generate XRANDR requests
when no change is neeeded.
We do the actual resize on WM_EXITSIZEMOVE, as resizing occurs in
a modal loop, to avoid a backlog of resize events building up as
the X server doesn't get a change to process anything until the resize
is completed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Implement framebuffer resizing in RANDR extension:
Resize the frame buffer, the screen's root window and the native window
containing the root window image.
Correctly allow for decorations in new native window size when resizing native window
to fit the new framebuffer size with AdjustWindowRectEx()
Update physical size info for a screen when it is changed by RANDR
Forbid client-requested RANDR changes in fullscreen and rootless modes
Only resize window on an external RandR request, to avoid recursing on
a WM_SIZE requested resize.
Also, add prototypes for winRandRInit() and winDoRandRScreenSetSize() to header file
Also, update the author list and copyright for winrandr.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Add -resize command line option to configure how native window sizing frame
is used.
In additions to the existing fixed and scrollbars modes, add a new mode to
allow framebuffer to be resized using native window frame
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Move QueryMonitor() out of windprocarg.c into a new file, winmonitors.c,
as we use to use it from other places as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Remove an attempt at the rather difficult optimization of detecting
if WM_DISPLAYCHANGE affects any of the monitors which intersect the
native window for the X screen.
We'll always act as if it does, which it probably usually the case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
(This stored calculation was wrong if -dpi came after -screen on the command
line, anyhow)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Refactor the drawing engines so we can explicitly allocate and release the framebuffer for a screen
Move the setting of dwPaddedWidth into the DDNL engine, so it is updated when the framebuffer changes size
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Some trivial build fixes required
Also fill out all function pointers for primaryfb engine
Also tidy up the man page section describing drawing engines.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Create a manpages.am makefile snippet in the root dir.
Each man page makefile includes manpages.am.
Now all man pages in xserver are generated the same way
using the same method as all of other xorg modules.
All ".man.pre" files in git are ".man" now.
Links are no longer created between different file types.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Now can be built easily on any platform in the man directory
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Never implemented in any open source driver. The implementation
assumed explicit DDX driver knowledge of how the client-side driver
worked, since at the time the server's GL renderer was not a DRI driver.
But now, it is, so any implementation of these should be done with
additional DRI driver API, like the swap control extension.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Fix compilation after commit 675f4a8525
converts winmouse.c to the new ValuatorMask input API, but doesn't
include the required header inpututil.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL) {
- free(E);
- }
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL) {
- free(E);
(
- E = NULL;
|
- E = 0;
)
- }
+ free(E);
+ E = NULL;
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
For the global variables defined in winglobals.c, remove duplicate extern
declarations from the beginning of various .c files, and move most of them
into a new header file, winglobals.h
Leave some clipboard related variables alone for the moment, they need treating
more carefully, to avoid mixing client and server type definitions.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Make g_hmodCommonControls static, it's only used in InitOutput.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Add winReleaseDDProcAddresses() for releasing the direct draw module
handle, so g_hmodDirectDraw can be made static
Remove unneeded duplicate extern definitions of g_fpDirectDrawCreate
and g_fpDirectDrawCreateClipper, and move the definition from
winglobals.c to winengine.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Make g_hhookKeyboardLL static, it's only used in winkeyhook.c
Also remove unused externs
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
I'm pretty sure the compiler has a better idea how to optimize this
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winkeybd.c: In function ‘winSendKeyEvent’:
winkeybd.c:489: warning: passing argument 2 of ‘mieqEnqueue’ from incompatible pointer type
winmouse.c: In function ‘winMouseButtonsSendEvent’:
winmouse.c:247: warning: passing argument 2 of ‘mieqEnqueue’ from incompatible pointer type
winmouse.c: In function ‘winEnqueueMotion’:
winmouse.c:380: warning: passing argument 2 of ‘mieqEnqueue’ from incompatible pointer type
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
return statement with an expression in a function whose return-type is void
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Also remove the out-of-date listing of keyboard layout IDs and which ones
have known mappings
XXX: layout zh_TW doesn't exist anymore
This patch brought to you by C-u M-x align-regexp
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winmultiwindowwm.c: In function ‘winApplyHints’:
winmultiwindowwm.c:1587: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winwindowswm.c: In function ‘ProcWindowsWMFrameSetTitle’:
winwindowswm.c:516: warning: pointer targets in passing argument 1 of ‘strncpy’ differ in signedness
winwindowswm.c:516: warning: pointer targets in passing argument 2 of ‘strncpy’ differ in signedness
winwindowswm.c:528: warning: pointer targets in passing argument 2 of ‘SetWindowTextA’ differ in signedness
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
windialogs.c: In function ‘winDisplayExitDialog’:
windialogs.c:327: warning: passing argument 3 of ‘PostMessageA’ makes integer from pointer without a cast
windialogs.c: In function ‘winDisplayAboutDialog’:
windialogs.c:597: warning: passing argument 3 of ‘PostMessageA’ makes integer from pointer without a cast
windialogs.c: In function ‘winAboutDlgProc’:
windialogs.c:697: warning: comparison between pointer and integer
windialogs.c:701: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘HINSTANCE’
windialogs.c:716: warning: assignment makes integer from pointer without a cast
windialogs.c:736: warning: assignment makes integer from pointer without a cast
windialogs.c:756: warning: assignment makes integer from pointer without a cast
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winconfig.c: In function ‘winNameCompare’:
winconfig.c:715: warning: array subscript has type ‘char’
winconfig.c:715: warning: array subscript has type ‘char’
winconfig.c:716: warning: array subscript has type ‘char’
winconfig.c:716: warning: array subscript has type ‘char’
winconfig.c:730: warning: array subscript has type ‘char’
winconfig.c:730: warning: array subscript has type ‘char’
winconfig.c:731: warning: array subscript has type ‘char’
winconfig.c:731: warning: array subscript has type ‘char’
winconfig.c: In function ‘winNormalizeName’:
winconfig.c:1092: warning: array subscript has type ‘char’
winconfig.c:1093: warning: array subscript has type ‘char’
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winclipboardxevents.c: In function ‘winClipboardFlushXEvents’:
winclipboardxevents.c:225: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘DWORD’
winclipboardxevents.c:266: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘DWORD’
winclipboardxevents.c:619: warning: pointer targets in passing argument 1 of ‘strcat’ differ in signedness
winclipboardxevents.c:659: warning: pointer targets in passing argument 1 of ‘strlen’ differ in signedness
winclipboardxevents.c:669: warning: pointer targets in passing argument 3 of ‘MultiByteToWideChar’ differ in signedness
winclipboardxevents.c:690: warning: pointer targets in passing argument 3 of ‘MultiByteToWideChar’ differ in signedness
winclipboardxevents.c:698: warning: pointer targets in passing argument 1 of ‘strdup’ differ in signedness
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winclipboardthread.c: In function ‘winClipboardErrorHandler’:
winclipboardthread.c:444: warning: format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Turn off the bad-function-cast warning for the XWin code, it's near impossible
to write code which uses Win32 API calls that doesn't trigger this warning
For example, SendMessage(WM_SETICON) returns an LRESULT, but we are supposed to
know this is safe to cast this result to a HICON, which gcc considers a non-matching
type.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove execute permission from source files
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove XFree86Server define, which was always on anyhow, and the
code which was guarded by !XFree86Server
This completes the process of removal started in 2006 :-)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Use U+0027 APOSTROPHE in XWin DDX help text, rather than
U+2019 RIGHT SINGLE QUOTATION MARK
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Cleanup some VENDOR_STRING/VENDOR_CONTACT cruft
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
mi will throw away rendering to input-only windows.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Drop DRAWABLE_BUFFER and related checks, mbuf was the only thing that
used them and it was killed in 0ba82562.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
commit cbd4d5dbb7
removes the static declarations of ProcWindowsWMDispatch and
SProcWindowsWMDispatch which precede their first use in
winWindowsWMExtensionInit()
Move winWindowsWMExtensionInit() to after the definition of those
two functions to fix compilation.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Some functions had to be moved around due some missing static definitions.
Another minor clean up like inexistent function declarations and etc were made
also.
Part of this patch was cooked using:
sed -i -e '/static DISPATCH_PROC*.*;/d' `git ls-files`
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Jeremy deleted rootlessAccelInit's implementation in 2008 in commit
587c010a1c. Delete its prototype and the
remaining commented-out call to it.
It still makes sense for the rootless GC ops to relax the planemask, but
that's independent of the size of the operation, so quit checking the
thresholds there.
FillBytes and CompositePixels are not called anywhere, so delete
everything related to both.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When a GC is allocated, it is zeroed, including all storage requested
with dixRegisterPrivateKey. So CreateGC hooks don't need to initialize
anything to zero.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Commit 9de0e31746 changed the signature
of __GLXScreen's createDrawable method.
Update the glxWinCreateDrawable() function in XWin's GLX provider
appropriately.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix some typos in devPrivates API changes in XWin code.
Move allocation of private keys as it's no longer valid to do them during OsVendorInit()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Propagate the shape kind all the way to SetShape to avoid performing non-input
operations such as revalidating the tree and generating exposures when only
changing a window's input shape.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Acked-by: Aaron Plattner<aplattner@nvidia.com>
Reviewed-by: Daniel Stone<daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
hw/xwin/Makefile.am was referencing this instead of hw/xwin/glx/Makefile.am
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
TryClientEvents already did this; this commit just moves the assignment
one level down so that no event source has to worry about sequence
numbers.
...No event source, that is, except XKB, which inexplicably calls
WriteToClient directly for several events.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This matches the test in TryClientEvents, and is a superset of tests
done by the callers of these functions. The consequence of forgetting
these tests is a server crash, so they're always desirable. In my
opinion, it's better to not require the callers to remember to do these
checks.
For callers that don't do very much work before calling WriteToClient or
WriteEventsToClient, I've removed the redundant checks.
hw/xquartz/xpr/appledri.c has an interesting case: While its check for
"client == NULL" appears redundant with the test in WriteEventsToClient,
it dereferences client to get the sequence number.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27497
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In some cases, an option of "50%" would be preferable over fixed value
configuration - especially if the actual values are autoprobed.
Add a new set of functions to parse percent values from configurations.
The percent value parsing differs slightly - if the option is not to marked
as used (e.g. xf86CheckPercentOption()), no warning is emitted to the log
file if the value is not a percent value. This allows double-options (either
as % or as absolute number) without warnings.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
A rewrite of the XWin DDX AIGLX code to actually make it do something useful again
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Change g_ScreenInfo, an array of winScreenInfo elements, from a
static array of MAXSCREENS elements, to a dynamically allocated one
Fix up the validation that -screen option screen numbers are
contiguous from zero (which possibly didn't work correctly before
anyhow)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jamey Sharp<jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Use an instance of the XWin DDX-specific screen info structure to hold
the current default values, to simplify greatly the code for applying
options to all screens and remove all those loops over MAXSCREENS screens
in the command line option processing
Use g_iNumScreens for tracking the current initialized screen count
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
unifdef found some code covered by
which it decided to remove. This patch simply restores that in case
someone wants it back.
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
Add $(AM_V_GEN) for sed-based rules so they appear as expected with
automake silent rules, and $(AM_V_at) to completely hide cp/ln/rm
commands which are not prone to fail.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Add $(AM_V_at) to all relink make targets to silence them when automake
silent rules are in use.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Allow the default log location to be configurable (e.g. /var/log),
and use separate logs for each display instance (e.g. XWin.0.log).
Make the type of g_pszLogFile const char*, per os/log.c:LogInit().
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix warnings due to prototypes not specifying function arguments
Fix warning with RegQueryValueEx()
Tidy up an include
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Remove some dead code, mostly code made obsolete by mandatory XKB
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tidy up some cosmetic issues in log strings:
- Add missing '\n'
- Fix some strings starting with '\n'
- Remove '\f' from some log strings
These all just look daft in a log with timestamps.
Also clarify log message about screen origin coordinates
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix a thinko in mount option checking.
Use symbolic names for values assigned to binary flag for clarity.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Currently the config and InputClasses are merged together so that the
options from the config backend have the highest priority. This is bad
since it means options such as a default XKB layout set by the backend
cannot be changed by the user.
This patch changes order of precedence to be:
1. xorg.conf
2. xorg.conf.d (later files have higher priority)
3. config backend
In order to allow this ordering, the config parsing has been changed to
read the xorg.conf.d files before xorg.conf. This has the consequence
that the core device picking which looks for the first InputDevice may
not find it in xorg.conf.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
