Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Calls RegisterResourceName to record the type name for
use by X-Resource, XACE/SELinux/XTsol, and DTrace.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Make sure to check return value before setting bitmask flags.
For most calls, just fails to init the extension. Since Xinput
already calls FatalError() on initialization failure, so does
failure to allocate Xinput's resource type.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XWin uses ddxBeforeReset, which is called in DIX. Other DDXs need to
define these in order to avoid an undefined symbol error at link time
when building alongside XWin. Xnest and Xvfb already provide empty stubs;
this does the same for Xdmx and the platform-neutral KDrive servers.
Also add a prototype to avoid a warning in all DDXs.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If -parent is given, don't open up a new window if -screen is given as well.
The commandline option -screen allows to set the depth of the embedded
Xephry instance, even though width and height are autoscaled on -parent.
This patch checks for a -screen parameter after -parent and - if one is
found - delays initializing the screen. The parent window id is stored
temporarily but re-set after a -screen argument.
The following command is thus valid:
Xephyr -parent 1234 -screen 640x480@8 -screen 1024x768
It embeds the first 8-bit screen into window 1234 and opens up a new window
for the second screen. Multiple parent arguments are possible, the screens
are embedded in-order.
X.Org Bug 24144 <http://bugs.freedesktop.org/show_bug.cgi?id=24144>
Tested-by: Vic Lee
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xkbRules, xkbModel and xkbLayout are strdup'd in KdNewKeyboard, need to be
freed.
The ephyr driver strdups the name on top of the already allocated
kdrive-assigned name. Memory must be freed beforehand.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
Clears warnings about obsolete headers, but raises minimum
required version of xf86driproto to 2.1.0
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xephyr(1): Fix quote formatting, add missing ' to contraction
Xserver(1): Add Xephyr(1) & startx(1) to SEE ALSO section
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Changes MakeAtom to take a const char * and NameForAtom to return them,
since many callers pass pointers to constant strings stored in read-only
ELF sections. Updates in-tree callers as necessary to clear const
mismatch warnings introduced by this change.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Also correct a link failure due to unresolved symbols. This
is arguably a libtool/ranlib/ld bug, that "may" be corrected
by linking all convenience libraries in a single one. But in
this case, it was preferred to just add a linker option to
Xfake_LDFLAGS, to force linkage of all libraries.
This corrects #19725.
We already have modmap (in the exact same format!) in XKB, so just use
that all the time, instead of duplicating the information.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Prepare for the impending removal of the state field by disabling this hack
for a while: it's hell of nasty and I'm amazed it ever really worked.
Basically, on focus out, it should do as current DDXes do and fake releases
for all keys (not just mangle the core state) that are currently down;
buttons too. When focus comes back in, we already have a KeymapNotify that
lets us know what's currently down, so we can use this to fake the
appropriate keypresses, and send it through the event routing layer.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
When we are looking up the screen for an event, we need to take
into account the fact that the event may have been delivered to the
"peer window" that we create when implementing GLX. Since we only
ever create one such window per screen, just add a single peer_win
field to EphyrHostScreen.
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
<http://bugs.opensolaris.org/view_bug.do?bug_id=6685465>
This is a refix of the previous fix for CR 6685465. In the first fix
I was shifting the colors to match the mask by the bits_per_rgb amount
in the visual structure. That field has nothing to do with the # of
bits to shift by. I should just instead shift the bits to match the mask.
<http://bugs.opensolaris.org/view_bug.do?bug_id=6685465>
This bug is caused by Xephyr not handling the RGB byte order correctly
of the server where Xephyr is displaying on. The previous code just
assumed that the order was RGB and did not take into account that
Xservers may use different order (such as BGR).
The fix is to add a function to calculate the byte order and bits
to shift based on the visual mask and the visual bits_per_rgb (which
is usually 8, but could be server dependent). Since the shifts won't
change once the display connection has been made, I can cache these
values so that Xephyr doesn't have to keep recalculating them everytime
it tries to translate the Xephyr colormap entries for Xephyr clients to
the actual server colormap entries (i.e. calling the function
hostx_set_cmap_entry() repeatedly for every colormap entry).
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
glcore gets linked with -ldl, -lpthread for s3tc and glapi
xserver needs
DLOPEN_LIBS - to dlopen the glcore dso
LD_EXPORT_SYMBOLS_FLAG - to export symbols for glcore to use
the ld flag is added to kdrive only when GLX is enabled, the net overhead for
Xephyr is ~155KB, could be reduced with --dynamic-list.
A few pieces of code were abusing this define for other purposes, which are
converted to #ifndef DEBUG instead. There should be no ABI consequences
to this change.
The rationale is that having the define in xorg-server.h also disables
assert() drivers, which is unexpected, and also difficult to avoid since
xorg-server.h is included in their config.h, and you can't put a #undef in
config.h. As for removing it from the server instead of moving it to an
internal header, we probably shouldn't have unnecessary assert()s in
critical server paths anyway, and if we do we could #define NDEBUG in the
specific cases needed.
When an expose event happens on an host GL window paired with an
internal drawable, route that expose event to the clients listening
to the expose event on the internal drawable.
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitScreen): try and detect when the host has no
DRI support. In that case, switch to the -nodri behaviour.
When in the -nodri case, make sure not to skip glx visual
initialisation.
* hw/kdrive/ephyr/ephyrinit.c:
(ddxProcessArgument): disabling visual init here
is bad because it gets disabled even when we want
to use software GL, leading to Xephyr :1 -nodri
crashing in mesa.
We can now launch GL or XV apps in any of the
Xephyr screens we want.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window):
(hostx_create_window): make these functions be screen
number aware.
* hw/kdrive/ephyr/XF86dri.c : fix some compiler warnings.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIQueryDirectRenderingCapable),
(ephyrDRIOpenConnection),
(ephyrDRIAuthConnection),
(ephyrDRICloseConnection),
(ephyrDRIGetClientDriverName),
(ephyrDRICreateContext),
(ephyrDRIDestroyContext),
(ephyrDRICreateDrawable),
(ephyrDRIGetDrawableInfo),
(ephyrDRIGetDeviceInfo): in all those functions, don't forward
the screen number we receive - from the client - to the host X.
We (Xephyr) are always targetting the same X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrdriext.c:
(EphyrMirrorHostVisuals): make this duplicate the visuals of the host X
default screen into a given Xephyr screen. This way we have a chance
to update the visuals of all Xephyr screen to make them mirror those
of the host X.
(many other places): specify screen number where required by the api
change in hostx.h.
* hw/kdrive/ephyr/ephyrglxext.c: specify screen number where required
by the api change in hostx.h
* hw/kdrive/ephyr/ephyrhostglx.c: don't forward the screen number we
receive - from the client - to the host X.
We (Xephyr) are always targetting the same
X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrhostvideo.c,h: take in account the screen number received
from the client app. This is useful to know on which Xephyr screen we
need to display video stuff.
* hw/kdrive/ephyr/ephyrvideo.c: update this to reflect the API change
in hw/kdrive/ephyr/ephyrhostvideo.h.
(ephyrSetPortAttribute): when parameters are not valid
- they exceed their validity range - send them to the host anyway
and do not return an error to clients.
Some host expose buggy validity range, so rejecting client for that
is too harsh.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_has_xshape),
(hostx_has_glx),
(hostx_has_dri): added these new entry points
* hw/kdrive/ephyr/ephyrdriext.c:
(ephyrDRIExtensionInit):
check presence of DRI and XShape extensions before
trying to use them.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrHijackGLXExtension):
check presence of glx extension before we use it.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): force the back clipping rects
to equal the front clipping rects.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly overclip the clipping rects we
got from the client. This bug fixes a clipping rect that was too
small in height, basically. Also fix a possible mem corruption.
* hw/kdrive/ephyr/hostx.c:
(hostx_set_window_geometry): remove a useless XSync
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitialize): cleanup ephyrDRI extension init.
remove functions that belongs in ephyrdriext.c .
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRICreateDrawable): create the drawable on the host X peer
window, not on the host xephyr main window.
(ephyrDRIGetDrawableInfo): get drawable info of the host X peer
window.
* hw/kdrive/ephyr/ephyrdriext.c: make ephyr DRI extention wrap
a bunch of screen ops so that it can update the host X peer
window whenever DRI bound drawable are moved in Xephyr.
Also code the building blocks of the management of the
host X window peer.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_create_window): added this new entry point
(hostx_destroy_window): ditto
()hostx_set_window_geometry): ditto
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): quickly hook
this into getting the drawable info from the host
X server. For the time being, this only gets the drawable info
of the Xephyr main window in the host. It should really get
the info of a the peer drawable in the host X. So there should be a
peer drawable to begin with.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): some cleanups. Properly get the
the drawable info otherwise there is a host X hang.
* hw/kdrive/ephyr/ephyrhostglx.c: do not
(ephyrHostGLXQueryVersion): do not use C bindings of the glx protocol
calls. Some of those actually access DRI context directly, resulting
in the context having three clients. Instead all XF86DRI proto
fowarding request should be coded by hand and only forward the
protocol requests
* hw/kdrive/ephyr/ephyrglxext.c:
fixed various logging functions
(ephyrGLXGetStringReal): make sure all the string is sent to clients
including the ending zero.
* hw/kdrive/ephyr/ephyrhostglx.c:
(ephyrHostGLXGetStringFromServer): better error handling.
(ephyrHostGLXSendClientInfo): ditto.
(ephyrHostGLXMakeCurrent): ditto
* hw/kdrive/ephyr/ephyr.c:
(EphyrDuplicateVisual): when duplicating the
visual, copy the color component masks and the class
from the hostX
(EphyrMirrorHostVisuals): don't mix blue and green mask.
* hw/kdrive/ephyr/ephyrdri.c: add more logs.
(ephyrDRICreateDrawable): actually implement this.
for the moment it creates a DRI drawable for the hostX window,
no matter what drawable this call was issued for.
(ephyrDRIGetDrawableInfo): actually implemented this.
for the moment the drawable info queried for its attrs is the
Xephyr main main window.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly hook this dispatch
function to the ephyrDRIGetDrawableInfo() function.
* hw/kdrive/ephyr/ephyrglxext.c: add a bunch of GLX implementation hooks
here. Hijack some of the xserver GLX hooks with them. Still need to
properly support byteswapped clients though.
* hw/kdrive/ephyr/ephyrhostglx.c,h: actually implemented the protocol
level forwarding functions used by the GLX entr points in
ephyrglxext.c. Here as well, there are a bunch of them, but we are
far from having implemented all the GLX calls.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window_attributes): added this new entry point
(hostx_allocate_resource_id_peer): added this to keep track of
resource IDs peers: one member of the peer is in Xephyr, the other
is in host X.
(hostx_get_resource_id_peer): ditto.
* hw/kdrive/ephyr/ephyr.c: make Xephyr mirror
the visuals of the host X upon startup. This
is important for GLX client apps.
* hw/kdrive/ephyr/hostx.c,h: add a hostx_get_visuals_info()
to get the visuals of the host X.
