Apktool/INTERNAL.md

350 lines
14 KiB
Markdown
Raw Normal View History

# Releasing a new version.
The steps taken for slicing an official release of Apktool.
### Ensuring proper license headers
Before we build a release, its a good practice to ensure all headers in source files contain
proper licenses.
./gradlew licenseMain && ./gradlew licenseTest
If any license violations were found you can automatically fix them with either
./gradlew licenseFormatMain
./gradlew licenseFormatTest
Like described, one formats the `src/main` directory, while the other formats the `src/test` directory.
### Tagging the release.
Inside `build.gradle` there are two lines.
apktoolversion_major
apktoolversion_minor
The major variable should be left unchanged. If done correctly, it will already be the version
you are about to release. In this case `2.2.2`. The minor variable should read `SNAPSHOT` as
the `2.2.2` release up until this point was `SNAPSHOT` releases (Unofficial).
We need to remove the `SNAPSHOT` portion and leave the minor version blank. An example can be
found [here](https://github.com/iBotPeaches/Apktool/commit/96b70d0be7513c5a1e5d3a3b9a75e4e2b076ad79).
After we remove `SNAPSHOT` we need to make the version commit. Organization and following patterns
is crucial here. This commit should have 1 change only - the change above. Now commit this change
with the commit message - `version bump (x.x.x)`.
At this point we now have the commit of the release, but we need to tag it using the following message.
git tag -a vx.x.x -m "changed version to vx.x.x"
For example for the `2.2.1` release.
git tag -a v2.2.1 -m "changed version to v2.2.1"
2021-03-07 21:12:27 +01:00
### Prepare for publishing.
New to Apktool is publishing releases to Maven, so plugin authors can directly integrate. You
need a `gradle.properties` file in root with the structure:
```
signing.keyId={gpgKeyId}
signing.password={gpgPassphrase}
signing.secretKeyRingFile={gpgSecretKingRingLocation}
ossrhUsername={sonatypeUsername}
ossrhPassword={sonatypePassword}
```
If `release` or `snapshot` is used publishing will be automatically attempted.
### Building the binary.
In order to maintain a clean slate. Run `gradlew clean` to start from a clean slate. Now lets build
the new version. We should not have any new commits since the tagged commit.
2017-05-08 14:45:39 +02:00
./gradlew build shadowJar proguard release
The build should tell you what version you are building and it should match the commits you made previously.
2017-05-08 14:45:39 +02:00
➜ Apktool git:(master) ./gradlew build shadowJar proguard release
Building RELEASE (master): 2.2.2
### Testing the binary.
Now the release binary is built in the same location as all other builds. Run this version against
some of the fixed bugs in this release. This is a simple test to ensure the build had no errors.
Copy the jar to any location to prep for uploading. The pattern we name the jars is
2017-01-23 14:21:37 +01:00
apktool_x.x.x.jar
Or in the case of the last release - `apktool_2.2.1.jar`
2017-07-29 21:07:12 +02:00
Once you have the jar in this form. Record the md5 hash & sha256 hash of it. This can be done using `md5sum`
and `sha256sum` on unix systems.
This can be shown for the `2.2.2` release like so
➜ Desktop md5sum apktool_2.2.2.jar
1e6be08d3f9bb4b442bb85cf4e21f1c1 apktool_2.2.2.jar
2017-07-29 21:07:12 +02:00
➜ Desktop sha256sum apktool-2.2.2.jar
1f1f186edcc09b8677bc1037f3f812dff89077187b24c8558ca2a89186ea3251 apktool-2.2.2.jar
Remember these hashes. These are the local hashes. These are our master hashes. All others (Bitbucket, Backup)
must match these. If they do not - they are invalid.
### Lets get uploading.
Lets make sure we actually pushed these release changes to the repo (Both Github & Bitbucket)
git push origin master
git push origin vx.x.x
git push bitbucket master
git push bitbucket vx.x.x
We upload the binaries into 3 places.
1. [Bitbucket Downloads](https://bitbucket.org/iBotPeaches/apktool/downloads)
2. [Github Releases](https://github.com/iBotPeaches/Apktool/releases) - Since `2.2.1`.
2021-03-07 21:12:27 +01:00
3. [Backup Mirror](https://connortumbleson.com/apktool/)
4. [Sonatype (Maven)](https://oss.sonatype.org)
#### Bitbucket
This one is pretty easy. Head to the URL attached to the hyperlink #1 above. There will be a "Add Files"
button on the top right of the page. Upload the `apktool_x.x.x.jar` file.
After it is uploaded. Immediately visit the page and download it. Check the `md5` for a match.
#### GitHub
This option will not work until the tag is pushed. You can head to this [page](https://github.com/iBotPeaches/Apktool/releases/new)
to draft a new release. The `Tag version` dropdown will have the new tag. In this case `v2.2.2`.
Select that option and make the title `Apktool vx.x.x`. There will be a description field on this release.
Hold tight, we link the release blog post in this field, but we can edit the release after the fact to add this.
Upload the binary `apktool_x.x.x.jar` and submit the release.
#### Backup Server
Access to this server is probably limited so this option may not be possible. SSH into the
`connortumbleson.com` server with username `connor`. Head to `public_html/apktool` and upload
the `apktool_x.x.x.jar` to it.
2017-07-29 21:07:12 +02:00
Now re-generate the md5/sha256 hashes for these files.
md5sum *.jar > md5.md5sum
2017-07-29 21:07:12 +02:00
sha256 *.jar > sha256.shasum
Check the `md5.md5sum` file for the hashes. The file will look something like this.
6de3e097943c553da5db2e604bced332 apktool_1.4.10.jar
...
1e6be08d3f9bb4b442bb85cf4e21f1c1 apktool_2.2.2.jar
2017-07-29 21:07:12 +02:00
Additionally check the `sha256.shasum` file for the hashes. This file will look almost identical to the above
except for containing sha256 hashes.
The hashes match so we are good with the backup server.
#### Sonatype
2023-07-16 21:03:05 +02:00
You'll want to log in and view the Staging repositories and confirm you see the recently made build. You'll want to:
* Close it (Wait for audit report email)
* Release it (Drop the staging repository)
* Wait 20min - 2 hours for it to appear [here](https://mvnrepository.com/artifact/org.apktool/apktool-lib)
With those done, time to get writing the release post.
We currently blog the releases on the [Connor Tumbleson personal blog](https://connortumbleson.com/).
This may change and the formatting of these release posts change over time.
Some recent releases for understanding the pattern can be found below.
1. [2.2.1](https://connortumbleson.com/2016/10/18/apktool-v2-2-1-released/)
2. [2.2.0](https://connortumbleson.com/2016/08/07/apktool-v2-2-0-released/)
3. [2.0.2](https://connortumbleson.com/2015/10/12/apktool-v2-0-2-released/)
4. [2.0.0](https://connortumbleson.com/2015/04/20/apktool-v2-0-0-released/)
For obtaining commit authors and counts. The following command does the legwork:
git shortlog -s -n --all --no-merges --since="05 Sept 2018"
Obviously replacing the date with the release date of the last version.
So write the post. I tend to always include the following:
1. Image of release for featured image when reshared on socials.
2. Quick sentence or two for SEO to describe the meat of this release.
3. Commit count and total for this release with author names.
4. Changelog linking to the bugs that were fixed.
2017-07-29 21:07:12 +02:00
5. Download including the md5/sha256 hash.
6. Link dump to Project Site, GitHub, Bug Tracker and XDA Thread.
Now that you've written this post. We need to go post it in places and update places where
Apktool is released.
### XDA Thread
We have a [thread](https://forum.xda-developers.com/showthread.php?t=1755243) on XDA Developers.
This thread follows the same pattern for all releases.
When writing a response to the XDA thread we follow another pattern of release notes. These examples
can be found below:
1. [2.2.2](https://forum.xda-developers.com/showpost.php?p=70687935&postcount=4635)
2. [2.2.1](http://forum.xda-developers.com/showpost.php?p=69188139&postcount=4478)
3. [2.0.0](http://forum.xda-developers.com/showpost.php?p=60255972&postcount=3063)
### Apktool Website
The Apktool project website has a few locations to update:
1. The homepage intro
2. The download link in header
3. Migrating `unreleased.mx` to a new blog post.
The easiest way to describe this is to just link to a [previous release](https://github.com/iBotPeaches/Apktool/pull/3146/files).
### Update Milestones
Now that we've released a version, we should hopefully have no more tickets in the release just published.
If there are, move those tickets to the next milestone.
You can head to [milestones](https://github.com/iBotPeaches/Apktool/milestones) to close the just
released version and create another.
I tend to create the next release (In this case `2.2.3`) with an ETA of 3 months in the future. This
is just a guideline but helps me to release a new version every 3 months.
### Social Spam
The final step is to send this release into the wild via some social posting. Head to the blog
where the release post was and send that link to Twitter, Google and whatever else you use.
Relax and watch the bug tracker.
# Building aapt binaries.
The steps taken for building our modified aapt binaries for apktool.
### Getting the modified `frameworks/base` repo.
First step is using the [platform_frameworks_base](https://github.com/iBotPeaches/platform_frameworks_base) repo.
While previously unorganized, the repo now follows the branch naming convention depending on the current Android version.
So `apktool_7.1` corresponds to the 7.1 Android release. This branch should work for all `android-7.1.x` tags for AOSP.
We didn't follow this naming convention until Android 7.1. So don't go looking for older versions. The current version
is `apktool-9.0.0`, which corresponds to the Android 9.0 (Pie) release.
This repo has a variety of changes applied. These changes range from disabling optimizations to lessening the rules
that aapt regularly has. We do this because apktool's job is to not fix apks, but rather keep them as close to the
original as they were.
### First we need the AOSP source
As cheesy as it is, just follow this [downloading](https://source.android.com/source/downloading.html) link in order
to get the source downloaded. This is no small download, expect to use 150-250GB.
Some optimization techniques for a smaller clone:
* `~/bin/repo init -u https://android.googlesource.com/platform/manifest -b master --partial-clone` - Partial clone
* `repo sync -c` - Only current branch
After that, you need to build AOSP via this [documentation](https://source.android.com/source/building.html) guide. Now
we aren't building the entire AOSP package, the initial build is to just see if you are capable of building it.
We check out a certain tag or branch. Currently we use
* aapt2 - `master`.
* aapt1 - `master`.
### Including our modified `frameworks/base` package.
There is probably a more automated way to do this, but for now:
1. `cd frameworks/base`
2. `git remote add origin git@github.com:iBotPeaches/platform_frameworks_base.git`
3. `git fetch origin -v`
4. `git checkout origin/master`
#### Mac Patch
Normally you'll be building this on a recent Mac OS that isn't supported. You'll want to follow these steps:
1. `vim build/soong/cc/config/darwin_host.go`
2. Find `darwinSupportedSdkVersions` array.
3. Add number that corresponds to output of: `find /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs -iname "*.sdk"`
### Building the aapt1 (Legacy) binary.
The steps below are different per flavor and operating system.
#### Linux / Windows
1. `source build/envsetup.sh`
2. `lunch sdk-eng`
3. `m aapt`
4. `strip out/host/linux-x86/bin/aapt`
5. `strip out/host/linux-x86/bin/aapt_64`
6. `strip out/host/windows-x86/bin/aapt.exe`
7. `strip out/host/windows-x86/bin/aapt_64.exe`
#### Mac
1. `source build/envsetup.sh`
2. `m aapt`
3. `strip out/host/darwin-x86/bin/aapt_64`
2017-05-23 15:28:14 +02:00
32/64 bit binaries will be built for Linux and Windows.
### Building the aapt2 binary.
The steps below are different per flavor and operating system.
#### Linux / Windows
1. `m aapt2`
2. `strip out/host/linux-x86/bin/aapt2`
3. `strip out/host/linux-x86/bin/aapt2_64`
4. `strip out/host/windows-x86/bin/aapt2.exe`
5. `strip out/host/windows-x86/bin/aapt2_64.exe`
#### Mac
1. `export ANDROID_JAVA_HOME=/Path/To/Jdk`
2. `source build/envsetup.sh`
3. `m aapt2`
2019-11-17 20:21:20 +01:00
4. `strip out/host/darwin-x86/bin/aapt2_64`
#### Confirming aapt/aapt2 builds are static
There are some issues with some dependencies (namely `libc++`) in which they are built in the shared state. This is
alright in the scope and context of AOSP/Android Studio, but once you leave those two behind and start using aapt on
its own, you encounter some issues. The key is to force `libc++` to be built statically which takes some tweaks with the
AOSP build systems as that dependency isn't standard like `libz` and others.
You can test the finalized project using tools like `ldd` (unix) and `otool -L` (mac) for testing the binaries looking
for shared dependencies.
2017-05-23 15:28:14 +02:00
# Gradle Tips n Tricks
./gradlew build shadowJar proguard -x test
This skips the testing suite (which currently takes 2-4 minutes). Use this when making quick builds and save the testing
suite before pushing to GitHub.
./gradlew test --debug-jvm
2017-05-23 15:28:14 +02:00
This enables debugging on the test suite. This starts the debugger on port 5005 which you can connect with IntelliJ.
./gradlew :brut.apktool:apktool-lib:test ---tests "*BuildAndDecodeTest"
This runs the library project of Apktool, selecting a specific test to run. Comes in handy when writing a new test and
only wanting to run that one. The asterisk is used to the full path to the test can be ignored. You can additionally
match this with the debugging parameter to debug a specific test. This command can be found below.
./gradlew :brut.apktool:apktool-lib:test --tests "*BuildAndDecodeTest" --debug-jvm