if a tooltip has only text, expecially only title or only subtitle, make
it as small as possible
BUG:343390
Change-Id: I5eff081613c9c64c78b8c5741bac67409a112c98
in some cases richtext in the tooltip is not desired, like
in the case of klipper. export a property to set
the text format
Change-Id: Ib4e8e913e060b868188b4f0b46db2162f33d8bb1
QAction keyboard shortcuts cannot work with QML2 (and probably newver will
since in Qt qtquick and qwidgets cannot depend from each other in any way)
so do a simple keyboard shortcut matching here
BUG:336203
Change-Id: I2d7ada7dfcb0e326e63ce7f1e39573709f6fe560
when an applet or cont is deleted, when invisible has systemimmutable as
its immutability (then restored to mutable if restored)
notify correctly the change
BUG:342704
Change-Id: Iea37fd287d6b120e161f5ac7ad4a17a078fec9bb
when a deleted applet of a deleted panel
gets undeleted, undetele before the panel itself
that's the safest and most "expected" outcome
BUG:343096
Change-Id: Iece7710028052b2118f590377fd39e3c78279b11
make sure the animation is disabled when the tooltip appears
for the first time.
since the correct implicitsizes can be calculated only when the
tooltip window is visible, we need to show the tooltip window
then calculate the final size and position, and last move it
*without animations*
Change-Id: I2d0f653e860104f17a62203565d5002a16d0dfae
reviewed-by: David Edmundson <kde@davidedmundson.co.uk>
BUG:341933
in cases screen resolution is quite low, and font size is enormous, popups
tend to become bigger than the screen
BUG:337041
Change-Id: I840868dbd7db665a3953687977d30dd6c3b4a386
Plasma::Package internally uses KPackage, being a pure wrapper.
old client code and old packagestructures still work using the wrapper.
old workspace code that is not directly using kpackage continues to work correctly
Change-Id: I05f95e8d05e3b67759973c4009e3753c61b1dcce
Otherwise we can have an invisible dialog in which the items think they
are visible.
QtQuick is smart enough to not redraw anything if the window isn't
visible, but a lot of bits of our code check the visibility flag to
enable/disable animations. These animation timers do still trigger when
the window isn't visible which wastes CPU cycles.
We are already meddling with the visibility flag so this shouldn't have
too much impact.
Change-Id: I92b969e60b4fdbe4ff2c70f9cce6e3408482a862
This makes the IconItem load the icon immediately after component creation and not
wait 150ms there for no reason which prevents eg. flickering in the OSD when it shows up.
REVIEW: 121219
Making transition between two different size doesn't make much sense,
since repainting is usually happens at that time and it could take some
time to finish. And the animation need to be stopped if m_animValue is set
manually.
Change-Id: I240c19f46d4d13eb0e54b4e7b3fa3b6c31cfc6d8
REVIEW: 121411
Unit now takes all fonts from the default system font, which we monitor
for with an eventFilter on the application object.
Change-Id: Ib17c01e2811c0c672be18a930d625d84ecd154a4
Given comboboxes use the same background as buttons they should use the
same text colour too.
This prevents a situation in Breeze where a ComboBox could get white
text on a white background when using a colourscope with complementary
colours.
Change-Id: I21502186178a32ce480cd3e838335451bf644c3e
different themes between QtControl themes in applets
and in config dialogs: this allows QtQuickControls
to be freely usable in applets without worrying how they
will integrate
Change-Id: I696bdcbd78eb2e4df708367ac0d70d13c5d6cf12
A single Plasma theme will be represented by one ThemePrivate object,
which is exported in multiple Theme objects.
We want to save the cache when that theme stops being used, not each
time an item stops using the theme.
saveSvgElementsCache calls sync() which involves a lot of parsing and
IO. This makes everything a lot faster at no cost.
Change-Id: Ica6ba0273bc99fb8ad8733a1c90db8f1e87c49ea
KConfig->reparseConfiguration is expensive. It throws away our cached
values.
The Units constructor was calling this every single time. Units is
created a _lot_; once per applet and once per FrameSVGItem.
This meant we were reloading the same config ~100 times on startup for
no reason.
Perf showed this as being ~5% of the total startup time.
- 7.47% 0.00% plasmashell libKF5ConfigCore.so.5.5.0
[.] KConfig::reparseConfiguration()
- KConfig::reparseConfiguration()
+ 66.51% Units::settingsFileChanged(QString const&)
+ 25.95% KConfig::KConfig(QString const&,
QFlags<KConfig::OpenFlag>, QStandardPaths::StandardLocation)
+ 3.93% KDesktopFile::KDesktopFile(QString const&)
+ 3.61% Units::settingsFileChanged(QString const&)
Change-Id: Ia70b7001ba473c8063e6c999b8e4233ea5b206f5
If an invalid icon size is passed to roundToIconSize we should return an
invalid icon size.
This can cause IconItem to load a small pixmap which will never be
shown.
Change-Id: Ia678f2e879b83317e2971069acf8f00d9ce2e052
The module .desktop file has a typo in the X-KDE-DBus-ModuleName which
results in the KCM not being able to see the status of the module.
Plus it renames the .desktop file to not contain the kded_ prefix, now
it matches every other kded .desktop file we ship (and also matches the
library and dbus module names).
Change-Id: I5006672ca041d9820b4388ba4e99b7899f36be18
updateMinimumWidth and updateMaximumWidth wrongly set the updated
value to height instead of width.
Change-Id: Ie24ef194d9bf02e53b92aa6802b0fbded68b896d
* Adapt the existing controls to be generic enough to work on stock QtQuickControls
* Add missing styles needed for the set to be complete (and applications actually work)
The full list of controls styles is now:
ApplicationWindowStyle
BusyIndicatorStyle
ButtonStyle
CalendarStyle
CheckBoxStyle
ComboBoxStyle
MenuBarStyle
MenuStyle
ProgressBarStyle
RadioButtonStyle
ScrollViewStyle
SliderStyle
SpinBoxStyle
StatusBarStyle
SwitchStyle
TabViewStyle
TableViewStyle
TextAreaStyle
TextFieldStyle
ToolBarStyle
ToolButtonStyle
GroupBoxStyle
Change-Id: Ic5d33bc20c7456d1478c07aca33bda63378d5c05
some of the behavior of the theme has changed.
this makes some of the old themes to not work correctly
(like black text on black)
read a version number of the "plasma version this theme has been intended for"
and use it to change the behavior for retrocompatibility
(all themes that don't export this are assumed to be from KDE4)
Change-Id: I4bc20a0c10de9f9a6c3facd63b6c5b6da210039a
in order to minimize resizes, redraws and eventual reloading of images,
try to initialize the wallpaper with the correct size already.
reviewed by: Kai Uwe Broulik <kde@privat.broulik.de>
Change-Id: I8489744cb845213195f1916bfb9328c53ec0798d
DialogStatus, as in other Dialog variants, can only be accessed through
the PlasmaComponents namespace.
Fixes 3 ReferenceErrors in SelectionDialog and makes it actually work.
It is possible to put a PlasmaCore.ColorScope element, to automatically
change the colors:
if for instance the complementary scope will be set, all labels
descendent of such element would flip their color
Change-Id: I2214aca522eb094cf067d8726c5bf2a7ecbf36b3
It's no longer necessary to add extra margin at the outside edge
with the panel theming fix.
Also clean up element positions to make the file easier to work
with.
Test is enhanced to also cover vertical bars. The ProgressBar does not yet use
the vertical assets since Qt just conveniently rotates the bar for us and
apparently just overriding the entire "panel" component is evil
REVIEW: 121085
this makes sure if there is an item with focus in the applet,
it and all its parent are removed the focus when the applet is deleted.
otherwise when there is an item with focus that loses its qquickwindow,
it will never be able to gain it again
it's a workaround but i'm not sure how should be fixed in qquickitem,
or if is even appropriate
Change-Id: I72c8f01d4557003604c4261ca5a9ab49dd136b02
having a light border, breeze-dark needs the panel margins to be
rebalanced by one pixel in order to appear really centered.
This is specific for the dark version, because the light version has the border
almost invisible, therefore a different visual balance
Change-Id: Ic7dbf250d2e1b9b269b4990c27a42a06605d5066
if the heuristic fails (because the topleft of the dialog is offscreen)
use at least our screen()
the screen should be correctly updated now on Qt 5.3+ so should be
more reliable anyways (could be tried to remove the whole Q_FOREACH
at this point)
Change-Id: I29311f4767bde3e02ae7bcb54b400b72a8f190eb
always show full margins in dialogs
this is to make things look less cramped with screen and panel edges
since mouse still has to work on screen edges (fitts law)
in that case it forwards mouse events inside the actual content item
so things like menus at the edge of the screen keep working
Change-Id: I4b8a5a5bac92eadbaf7ad5b9b7dc0d5f364888c3
tjob pointer is checked for being null (result of the dynamic_cast)
and then passed to clearDataForMimeJob. The issue can be solved by
replacing tjob with job in the problematic line, but since the
mimeTypeRetrieved method called later already processes jobs that
are not KIO::TransferJob, there is no purpose in doing it here as well.
Change-Id: I863ac41ad66ac3cbceca82adeab85498315a5e42
If d->applet->package().isValid(), then d->qmlObject->mainComponent()
is null.
This makes Plasma crash when a faulty plasmoid is loaded.
REVIEW: 120581
Adding up margins along the horizontal or vertical axis is often
done to calculate sizing or spacing. This tends to result in scary-
long and bug-prone expression being bound to props, since nobody
seems to like to blowing them up into a code block with a separate
variable assignment. This aims to increase the readability of com-
plex expressions by summing axis margins into a single operand.
Change-Id: I39a37dde80b9314da0c69f3b33d26d26a9ff54d1
consider the case of fallback as well when we are searching for a texture
reviewed by: Eike Hein <hein@kde.org>
Change-Id: I1faa119f9b3486d21ebd07a294b5063a896d7af1
add a property in Svg (and framesvgitem) to tell if the current theme
has this image, or if some fallback did happen
useful for items that are better not displayed than showing the potentially different
default theme
Change-Id: Ib914c0e196c5c941d35d9a600cc7d38818fc754f
This is not completely correct.
however, when reparenting the mainItem containming window thumbnails
it causes serious graphical artifacts, like the "lost fonts" on
nvidia and fglrx
Change-Id: Id194f5e7863e4ed71792835a9a3cf9c6e4fa70ee
is the only event we get we know the window will already be visible
to set the flags to have actually any effect
BUG:335572
Change-Id: Id1b69a894295af59a681946df9d14ff7ed316526
setting a null parent to mainitems seems to screw up with their QQmlContext
the problem can be seen with the taskbar, that after fiddling with tooltips a lot, (like switching between pager and a task) it loses thumbnails and it starts to output on stderr
about ids that aren't accessible anymore.
Change-Id: Ibbb6d270fd2e20b5b6745e228f4010b74d3266c9
make the dialogs borders the same for composite and non composite mode
more consistent behavior -and- fixes a test on openbox
Change-Id: Idd687a1f3b44f89d35886e1f9a86c2543741cbdb
the layout size hints can change all together, in any order possible.
the only way to have a deterministic behavior is to compress them
and do the sync of the size all at once.
also being sure to do a single adjustGeometry (one X call) instead of
separate setWidth/setHeight
a test for the issue is dialog_resizeWithParent.qml
BUG:339478
Change-Id: Ia7c3c55e40ff89971beb734dcd205df05bfba687
- Consistent stroke width
- 22x22 replaces 24x24 sizes
- align most icons to pixel grid
- changed some icon designs based of feedback of plasma dev team
Dialog.h uses netwm_def.h in the header so it should be included by apps
that use plasmaquick implicitly
Change-Id: I55507f552025468dde32e4830a78e34dc35c03af
We only want to toggle our visibility until after all window flags have
been set, as some flags can only be set before the window is shown.
This patch caches and proxies the visibility flag and only update the
real visibility when the component is complete.
Change-Id: I4ce7744dc48afecf35db6679ca0991b7042e45a2
AppletQuickItemPrivate::compactRepresentationCheck() must not be executed before
the qml parse is over and rootObject is here: the creation of the full or compact representation
would go very wrong in that case
Change-Id: Ib72f7d25f570a1ae34ada3330080350384d5c1e8
CCBUG:339329
use adjustSize in updateMinimumWidth et al.
changing tooltip content updates sizeHints
using setGeometry is immediate, and will kill the animations.
for dialogs other than tooltips there is no change since adjustGeometry
is just setGeometry
Change-Id: I3e6310f12f76e400f2663b8409a2bbc7e7398f39
since when is not visible the dialog doesn't update its size
from the mainItem size, the minimum size should not be
updated as well, or the initial mainitem size will get lost
and the dialog will be initialized to a wrong size
Patch by: Vishesh Handa <vhanda@kde.org>
Change-Id: I272727fb4732474b102de64c9bfdddb7fc3906c8
The code in Button is
panel.implicitWidth: max(label+borders, backgroundImplicitSize)
by setting the background implicitSize to be max(size, labels+borders)
we just duplicate the functionality.
This worked, but icon only buttons became smaller because we weren't
setting the implicitHeight of the label properly.
(two wrongs were making a right)
We need to move the RowLayout inside an Item as we are modiyfing the
preferredHeight of RowLayout, but this doesn't sync back to updating the
implicitHeight which Button.qml uses.
This fixes all binding loops and the rather broken icon only flat
button.
Change-Id: Id2f9c2ab37b2280ee69dc1473f388fe686e3327e
return a size rounded tothe nearest inferior standard icon size.
sizes larger than iconSizes.huge, it will be returned unmodified
Reviewed by: Kai Uwe Broulik <kde@privat.broulik.de>
Change-Id: I85c575ea1cc7965ae9bede9e5a8b7b4cb342580e
when we check if a position is in a screen, we need
the whole screen geometry, panels included, otherwise if we pass
a coordinate under a panel, it will think no screen is there
Change-Id: I802a2bec4ae44b583eafdc309934e67b620cc463
A dialog can be resized for two reasons: the mainItem size changes, or the dialog size changes.
the first can happen programmatically, caused by the Layout, or just by assigning the width.
the second can be caused either programmatically, assigning the size of the dialog or externally by the windowmanager, that is the only one theat in the end has the only final control of the window size
Change-Id: Ifc5c7f683039f83d13a5046c10d6dd0227169542
REVIEW:120235
revert part of
306e353fe6
if a framesvgitem has an implicitsize explicitly set, it shouldn't be overwritten
Change-Id: I931ca8acafdc2f6908945d03fca97487ced22988
As with containment, make sure Containment::applets()
is always sorted by id, to have the least sursprises possible
it adds a test
Change-Id: Ib1aeeff7c70bb6969b32b2fef8557889a43edf09
the order in which containments were restored used to be quite random:
ensure that's ordered by id this makes the shell startups be more reproduceable
from one to another, if a new containment arrives, ensure it's inserted
maintaining id order
containment::appelts() will need the same treatment
adds a test as well that checks the order is right
Change-Id: Ie1b278e5b83d7e3645f7293bf6d030aa7f43a221
if a containment's lastScreen is not -1 (and a valid screen)
*and* its activity() is not the current one, its QML
will *not* be loaded, therefore it would dangle blocking
corona::startupCompleted until the activity is selected
Change-Id: I6757d29240a012377e9ff0a22fe16541ea712ee6
* never enable all the borders just to take margins, there is fixedMargins for that
* redo ResizeOrigin: Dialog needs to sync from both sides: when the mainItem gets resized, *and* when the window gets resized (syncing mainItem)
* don't crash when there is no Layout: not all mainItems export one
* fix availableScreenGeometryForPosition()
Change-Id: I09370e33a3e8d03675b60f14c6c5754f8491d52c
updateLayoutParameters's uses the borders in order to set the max and
minimum size, and therefore syncToMainItemSize should always be called
before it is ever called.
Also added code to not do anything if we are not completely initialized.
As with containment, make sure Containment::applets()
is always sorted by id, to have the least sursprises possible
it adds a test
Change-Id: Ib1aeeff7c70bb6969b32b2fef8557889a43edf09
the order in which containments were restored used to be quite random:
ensure that's ordered by id this makes the shell startups be more reproduceable
from one to another, if a new containment arrives, ensure it's inserted
maintaining id order
containment::appelts() will need the same treatment
adds a test as well that checks the order is right
Change-Id: Ie1b278e5b83d7e3645f7293bf6d030aa7f43a221
if a containment's lastScreen is not -1 (and a valid screen)
*and* its activity() is not the current one, its QML
will *not* be loaded, therefore it would dangle blocking
corona::startupCompleted until the activity is selected
Change-Id: I6757d29240a012377e9ff0a22fe16541ea712ee6
Containments with no applets will emit uiReady now
It adds a test as well that checks if this is the case.
There is still a case where the corona doesn't emit startupCompleted()
that's when there is more than one activity, but that, as well the test
will be adressed by another patch on a different part.
Change-Id: I4d83aa612c29fb0f441d11681bc5aba241370bc3
Setting the implcit width to be the same as the current height is very
easy to end up looping.
actual height of the background is set by the base style, which is based
on the implicit sizes anyway.
BUG: 338750
Change-Id: Ic7606588cec09c6ff16515c208efe576466d31d6
still catalog actions by type
the order is still not exactly the same, but that's not possible, since the action order is decided in the context menu plugin and there are some actions only in the toolbox
CCBUG:338585
We are in a strange cycle when we have a visual parent. In order to
obtain our position, we need to know our size. Our size depends on the
borders visible. The borders visible depend on the size.
When we do not have a visual parent this is not a problem as we do not
have a position where we are supposed to be.
In order to solve this cycle, when we have a visual parent, we typically
assume we have all borders, call popupPosition, move to that position
and then use that new position to figure out the borders, get the new
size (incase any borders have changed) and move again. This double
moving is not good. With that patch, we still do the same but we avoid
moving twice.
We seem to have cases where once the dialog is visible and the visible
event is over, then the width/height updates itself, so we need to
reposition the dialog appropriately.
The functions are often called a number of times before the
component is actually completed. There is no point of this.
Also added a function updateLayoutParameters which update all 4
of these in a more efficient manner. There is a certain amount
of code duplication between those 4 functions and this one, but
that can be fixed in another patch.
- updateTheme should always be called the frameSvgItem's size has been
upated. It uses the geometry of the frameSvgItem. Also updated the
documentation.
- When a dialog has a visualParent, setting the position of the dialog
is slightly compilcated. In order to set the position we have to give
the function popupPosition the size of the dialog so that it can
determine where to place it, however the size of the dialog depends on
the position as some of the borders are drawn depending on the
position. We have a circular problem.
For now we're solving this by tempoarily giving the full size with all
the borders in the case when there is a visual parent.
Remove the timer and call syncToMainItemSize directly whenever it used
to be called. We avoid the extra event loop this way. This probably
breaks somethings, but we can figure that out and add tests for that.
The only place it is now used is when the window x/y position changes.
There is now a dedicated function to handle that.
This brings us one step closer to removing the entire sync timer
When the minimumWidth/Height of the attached Layout of the mainItem
would change. The following events would happen -
- updateMinimumWidth is called
--> results in resizeEvent being called
--> results in syncMainItemToSize
--> results in slots connected to mainItem widthChanged
---> syncMainItemToSize + syncToMainItemSize being called a few more
times. It's not entirely apparent why at thist point.
This kind of logic is quite hard to follow and more importantly because
of the timers in the middle, an extra paint event is called. This means
the user can first see the window resize and then the item getting
resized.
This patch introduces a little bit of code duplication (can be fixed in
future commits) to clearly establish what updateMinimumWidth should be
doing -
* disconnect signals to make sure mainItem's widthChange is not triggered
* update window size + item size + borders
* reposition if required
The repositioning is useful as currently if a dialog becomes wider if
will not reposition itself and will overflow. With this patch we always
make sure the entire dialog is shown.
Minor Point: On testing without the patch the dialog does reposition
itself if it is not already overflowing. I suspect this is kwin moving
the window.
A test called dialog_minWidthHeighRepositioning.qml can be used to see
how the change occurs before and after.
QQuickLoader is a focus scope so that it can automatically forward the
focus to it's item. Conditional loader should do the same and forward
the focus to its internal loader.
Setting the focus is a good thing, the problem with forceActiveFocus is
that it will not allow any child to receive the actual focus, instead
the focus is forced on to the root element of the applet which may not
be desired.
When for example trying to improve keyboard focus behavior of KickOff
without this patch I cannot get the initial focus on the list of
favorites since it gets reset after the applet is created.
REVIEW: 119872
The svg needs some adjusting like inner padding to match the other svg
icons, but I have 0 knowledge of inkscape; Marco, can you please have a
look?
CCMAIL:notmart@gmail.com
On some themes Plasma::SVG gives empty pixmaps. Loading a null QImage to
an atlas texture causes a crash in old versions of Qt.
Guard against it.
BUG: 88039
Reviewed-by: Martin Klapetek
These classes are exposed only as QML so we should only show members the
user can actually use.
The invokable is moved to the top for easier reading
REVIEW: 119745
we were creating new packagestructures on each package creation
and never deleting them, causing a pretty big leak.
now keep a single instance of the structures, with prototype packages.
members are static for binary compatibility.
i would go for max one bic change in this library that's when and if
this library will be made pubic.
Patch by Aaron Seigo
consider a loaded package valid even if !isvalid() but does have some file
that indicates it has a valid packagestructure.
for how packages are loaded now, a package is never valid at first if has a required file:
because the path gets set only after the package is loaded
this fixes wallpaper loading
At the moment it's trying to translate the item position and iterating
through all screens, but we can get the screen through the item's window.
REVIEW: 119603
Apparently in nvidia we get corruptions when a texture created for a window
is used in another one.
With this patch we tell the texture has changed when we move it from a
window to another, so it's re-created and we keep textures for all windows
separately. This way we ensure they don't mix.
REVIEW: 119465
Apparently in nvidia we get corruptions when a texture created for a window
is used in another one.
With this patch we tell the texture has changed when we move it from a
window to another, so it's re-created and we keep textures for all windows
separately. This way we ensure they don't mix.
REVIEW: 119465
reintroduces an api call from plasma1:
its the only way to solve
https://bugs.kde.org/show_bug.cgi?id=337200
basically to avoid a crash when plasma starts with missing containments in the appletsrc and a locked corona, or a screen added with locked widgets.
it's the only entry point that allows a creation of a containment when widgets are locked
REVIEW:119513
CCBUG:337200
We previously only supported compose-over-border when the centre was not
set to tile.
It's possible to use compose over border with tile.. even if it doesn't
make much sense.
Given that creating an opacityMask loads most of the image anyway, we
can make use of the FrameSVG painter path and avoid any additional code
complexity here.
REVIEW: 119406
this is the little part in plasma-framework for the applet alternatives chooser.
works together the branch mart/alternativesConfig of plasma-workspace and plsma-desktop.
for how it looks and why, see the vdg forum thread:
https://forum.kde.org/viewtopic.php?f=285&t=122067&p=315919#p315919
still possible problems:
I'm not sure about using a new desktop file entry X-Plasma-Provides, maybe Categories could be enough, but it may produce many false positives as well
REVIEW:119409
It was needed, after this we realized that the buttons looked odd,
in some cases, because the center wouldn't be under the 2px wide
sides.
This reverts commit e34d89a1f5.
Breeze theme usually has borders and center that can be tiled, which
ends up in more performant rendering, as we don't need to re-render
anything from the svg every time we resize an element.
Basically what we did was "s/hint-stretch-borders/hint-tile-center/g".
The only exceptions we found for this were: picker, dragger and monitor.
Reviewed by David Edmundson
CCMAIL: plasma-devel@kde.org
Revert the changes in contentsRect, it was clearly not the best place to
put the code that contains the code that computes the content size.
Instead move the code in FrameSvgItem, duplicates data and code but works.
Use FrameSVG as 9 tiles instead of uploading a big texture of the finished frame each time.
This also saves the cache being populated with full created frames in different sizes; which end up taking up space in the disk and shared memory cache as well as the GPU memory.
A code path falls back to the original uploading the entire texture if obscure settings are used, i.e overlay.
Benchmarks:
apitrace when resizing a frame goes from an average of 7.6ms per frame of CPU time just for the swizzling and uploading to 1.4ms
GPU time also drops from 40us to 10us
Themes will need to remove stretch-borders (when we gain nothing from stretching; i.e Breeze) to get the most out of it.
REVIEW: 119330
It's unreasonable to use private API, so make everything public API so that
every user of FrameSvg have as much features exposed as possible.
Reviewed by David Edmundson
While debugging a glitch I found out a bug in the painting code that hide
behind QRect documentation. See comment in sectionRect. This never rendered
correctly.
This reverts commit c38e6a204e.
This causes problems on the panel toolbox.
We were already trying to set a parent; however as it's a property of a QQuickItem
it only changes the visual parent; kdeclarative has a code path that if there's
a visual parent to skip the memory management; bug is probably there instead.
This originates from the request of downstreams to hide packages that are still installed.
why should be easier than not installing them i don't know, *but* semantically I think it makes sense act as if the package was not existing when the metadata says it's hidden
REVIEW:119329
Fallback to the old code if there's something not (yet?) handled by the
new implementation. This way we get to optimize for the the common use-case
without breaking former, complex, code-paths.
Reviewed by David Edmundson
This patch simplifies the grid a bit more by using Canvas instead of
Rectangles, so actually lowering the number of Items needed to create
the grid from 16 to just 1.
It works pretty neatly with no junctions problem at all.
REVIEW: 119283
Given the FrameData and the total size, we get to know where is the
contents going to be and gives us the information to extrapolate where to
put all the borders and corners.
Reviewed by David Edmundson
Move variable declarations closer to its uses
Prefer using QSize than width and height separately, so we can pass it
around directly and use isEmpty
Remove duplicated code in the central piece drawing
Reduce type casts from QSizeF to QSize, we're always using it as a QSize,
so just make the cast once.
Remove redundant constructions like checking whether it's null and returning
null or unneeded arithmetics
Create a paintBorder function that can generically paint framesvg borders.
This helps us reduce duplicated code as well as improving the readability
of the code.
Reviewed by David Edmundson
Make sure AppletPrivate::uiReady is set in applet_p.cpp when we report that
the ui is ready.
Make sure that if we loop through all the containments and they're all
ready, we emit that it's done.
So far, Corona::startupCompleted was never emitted.
REVIEW: 119220
Currently the grid itself is composed of 88 rectangles that draw all the
lines in a way that two big rect draws the whole two topmost horizontal
and leftmost vertical border lines and then each day rectangle is
drawing small bottom and right rect.
This patch reduces it to 13 rects only where one rect draws the whole
frame around the grid and then 1px wide/high rects draw the inner lines.
Results in much cleaner & simple code.
Plus there's a small refactor on the id names so it makes more sense.
This does not require any additional changes in the applets.
REVIEW: 119232
While profiling plasmashell memory usage with Vishesh we realized that most
of the usage came from loading the Background image repeatedly.
We traced it back to this change, where we were connecting to
wallpaperChanged before initializing it, so it would initialize it again,
loading the wallpaper twice. It's not that we were leaking the object,
AFAIK, but loading an image using QQuickImage already raises the memory
quite a bit.
This change alone reduces by 15% the memory usage of my plasmashell (with 2
screens, that makes it a bit worse, because there's 2 DesktopViews then).
REVIEW: 119216
TimeTracker is a small class that keeps track of an object the changes in
the properties of an object and relates them to a point in time. This way
we can see how things change and react to each other. Then, this information
is exported into a json file to analyze.
REVIEW: 119199
Qt Quick accessibility already picks up the text automatically. Instead
set the name (which is a descriptive element) to the placeholder text
which is more descriptive of the element. Otherwise Orca will read the
text twice.
restore the disconnect: sometimes appletRemovedForward gets executed after
aboutToQuit is emitted, but before closingDown returns true
this prevents configuration to be forgotten
the problem is that sometimes when QCoreApplication::aboutToQuit the containment is already deleted (the order is not really deterministic), therefore appletScript::applet() will hit an assert.
using a qpointer should solve it, its data being already 0ed in the cases the containment is already deleted at :aboutToquit time.
the disabled/invisible actions already have it as properties.
this fixes the add widgets action sometimes not being available
in the toolbox
Reviewed by: Bhushan Shah <bhush94@gmail.com>
Applet::immutability() is the maximum between internal applet immutability
and the immutability of its containment.
so not set higher immutability in the internal member of Applet
or the applet will not be able to be unlocked properly
Reviewed by: Sebastian Kügler <sebas@kde.org>
the color properties are remotely useful only when used from QML
and risk to explode in number in the future,
it's not a good thing for a public c++ api.
Also, they will become kinda deprecated as in largely replaced by
the ColorRole api. Too late to remove those properties completely,
but still last days to move them at least out of c++ api.
(and in qml they could be removed in the future in a 2.1 version
of the import while still being present in 2.0 if needed)
This moves the color properties is a theme subclass available only from QML
REVIEW:118972
The latter breaks for subclasses of QMenu.
Follow up to review 118361.
CCMAIL:martin.klapetek@gmail.com
Fixes libkonq menus opened from Folder popup dialogs closing the
dialog.
BUG:336702
Qt::Tooltip is a mix of other flags (0x0001101)
using a simple & is not correct as any Window will have (0x0000001) set
and the bitwise & operation will return a non-zero value
REVIEW: 118906
The popup dialog can currently never be resized, so it doesn't make
sense to record its height in a config file. Additionally, this also
causes problems when applet writers change the size of their plasmoid.
Since the old size is saved in the config file, it is shown with the old
dimensions instead of the new ones.
REVIEW: 118849
BUG: 336070
Included is a plasma theme to make it look the same.
A known regression is that SectionScroller is temporarily removed
but that is currently not used in plasma-desktop
and this fixes a lot more problems than it causes.
REVIEW: 114283
it's an import in core, and advertises itself as an "attached property"
with this we can:
say that all its chidren are of a certain context, like "button" or
"complementary"
then anywhere there will be available an attached property, as ColorScope,
so like:
PlasmaCore.ColorScope {
group: PlasmaCore.Theme.Complementary
PlasmaComponents.Label {
text: "foo"
color: ColorScope.textColor
}
}
- internally, smallSpacing, largeSpacing and gridUnit are entangled, and
all use the font's rendered size. This means we can save a
QFontMetrics construction by merging the updating of these three
props.
- A wanted side-effect is that the updating of spacing and gridunit now
happens at the same time, so they're updated consistently in the UI.
- Also, use compile-time connects for the Plasma::Theme::themeChanged
connection
1/8 is really ridiculously small, it ends up being 2px on almost all
systems, and using it between UI elements makes them look really
cramped. 1/4 works much better, and makes this property actually useful.
for areas intended to have independent background and text color than
all the rest, like the Logout dialog
if Colors:Complementary is not present in the theme, it falls back to
normal colors
The used corona is either the containment's parent or, in case the parent
is an applet, it's containment's corona. With this change we ensure the
proper corona is always found.
This change requires screenContainment to be able to walk through the
object tree in case it's not a containment directly managed by it.
BUG: 334500
Basically splits the Calendar::m_startDate into 'today' and
'displayedDate', where displayedDate is the date that is displayed (it
controls the days model etc) and can be manipulated by the user by eg.
changing months in the plasmoid, and today is the current day, populated
by our dataengine (which means it auto-updates with no need for a
timer).
This allows for greater flexibility and things like "Go back to today"
when eg. the plasmoid is hidden or when the user have browsed too far in
the calendar and just wants to get back to today (the button to do that
pending).
Also this fixes a problem where the time dataengine is being polled
every 30secs for the clock and would reset the calendar view as the
startDate is currently bound to the dataengine and the view resets on
that change.
REVIEW: 118668
CCBUG: 336304
This enables and disabled menuitems with a timer, so we can see whether
dynamically updating these properties are propagated to the QMenu in the
proxy.
CCBUG:336281
* trigger an update after the animation finished as the IconItem needs to
switch to SVGTextureNode again
* Don't connect needlessly to a lambda slot
* FadingMaterialShader had the texture bind swapped
* Fix virtual method hidden warning in FadingMaterialShader
* Use dynamic_cast instead of static_cast to convert to SVGTextureNode
or FadingNode.
REVIEW: 118251
this makes it as synced as possible with the window
will still be behind the window size by exactly one frame
but at least is ensured is no more than one
