Motivation:
The java doc doesn't match the real case: The exception only happen when a write operation
cannot finish in a certain period of time instead of write idle happen.
Modification:
Correct java doc
Result:
java doc matched the real case
Motivation
Currently every call to get() on a promise results in two reads of the
volatile result field when one would suffice. Maybe this is optimized
away but it seems sensible not to rely on that.
Modification
Reimplement get() and get(...) in DefaultPromise to reduce volatile access.
Result
Fewer volatile reads.
Motivation:
It is noticed that SimpleChannelPool's POOL_KEY attribute name channelPool is easy to get conflict with user code and throws an exception 'channelPool' is already in use. Being a generic framework - it would be great if we can name the attribute something unique - may be use UUID for the name since the name is not required later.
Modifications:
This change make sure that the POOL_KEY used inside SimpleChannelPool is unique by appending the object hashcode in the name.
Result:
No unwanted channel attribute name conflict with user code.
Motivation:
394a1b3485 added support for recvmmsg(...) for unconnected datagram channels, this change also allows to use recvmmsg(...) with connected datagram channels.
Modifications:
- Always try to use recvmmsg(...) if configured to do so
- Adjust unit test to cover it
Result:
Less syscalls when reading datagram packets
Motivation:
We should also use sendmmsg on connected channels whenever possible to reduce the overhead of syscalls.
Modifications:
No matter if the channel is connected or not try to use sendmmsg when supported to reduce the overhead of syscalls
Result:
Better performance on connected UDP channels due less syscalls
Motivation:
394a1b3485 introduced the possibility to use recvmmsg(...) but did not correctly handle ipv6 mapped ip4 addresses to make it consistent with other transports.
Modifications:
- Correctly handle ipv6 mapped ipv4 addresses by only copy over the relevant bytes
- Small improvement on how to detect ipv6 mapped ipv4 addresses by using memcmp and not byte by byte compare
- Adjust test to cover this bug
Result:
Correctly handle ipv6 mapped ipv4 addresses
Motivation
#9152 reverted some static exception reuse optimizations due to the
problem with Throwable#addSuppressed() raised in #9151. This introduced
a performance issue when promises are cancelled at a high frequency due
to the construction cost of CancellationException at the time that
DefaultPromise#cancel() is called.
Modifications
- Reinstate the prior static CANCELLATION_CAUSE_HOLDER but use it just
as a sentinel to indicate cancellation, constructing a new
CancellationException only if/when one needs to be explicitly
returned/thrown
- Subclass CancellationException, overriding fillInStackTrace() to
minimize the construction cost in these cases
Result
Promises are much cheaper to cancel. Fixes#9522.
Motivation:
Following up on discussion with @normanmaurer with suggestion to improve code clarity.
Modification:
Method is synchronized, no need for assert or verbose sync blocks around calls.
Result:
Reduce verbosity and more idiomatic use of keyword. Also rename the method to better describe what it's for.
Motivation
This is another iteration of #9476.
Modifications
Instead of maintaining a count of all writes performed and then using
reads during shutdown to ensure all are accounted for, just set a flag
after each write and don't reset it until the corresponding event has
been returned from epoll_wait.
This requires that while a write is still pending we don't reset
wakenUp, i.e. continue to block writes from the wakeup() method.
Result
Race condition eliminated. Fixes#9362
Motivation:
When using datagram sockets which need to handle a lot of packets it makes sense to use recvmmsg to be able to read multiple datagram packets with one syscall.
Modifications:
- Add support for recvmmsg on linux
- Add new EpollChannelOption.MAX_DATAGRAM_PACKET_SIZE
- Add tests
Result:
Fixes https://github.com/netty/netty/issues/8446.
Motivation:
We need to update the doubly-linked list nodes while holding a lock via synchronized in all cases as otherwise we may end-up with a corrupted pipeline. We missed this when calling remove0(...) due handlerAdded(...) throwing an exception.
Modifications:
- Correctly hold lock while update node
- Add assert
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9528
Motivation
This is a "simpler" alternative to #9416 which fixes the same
CompositeByteBuf bugs described there, originally reported by @jingene
in #9398.
Modifications
- Add fields to Component class for the original buffer along with its
adjustment, which may be different to the already-stored unwrapped
buffer. Use it in appropriate places to ensure correctness and
equivalent behaviour to that prior to the earlier optimizations
- Add comments explaining purpose of each of the Component fields
- Unwrap more kinds of buffers in newComponent method to extend scope of
the existing indirection-reduction optimization
- De-duplicate common buffer consolidation logic
- Unit test for the original bug provided by @jingene
Result
- Correct behaviour / fixed bugs
- Some code deduplication / simplification
- Unwrapping optimization applied to more types of buffers
The downside is increased mem footprint from the two new fields, and
additional allocations in some specific cases, though those should be
rare.
Co-authored-by: jingene <jingene0206@gmail.com>
Motivation:
There are some extra log level checks (logger.isWarnEnabled()).
Modification:
Remove log level checks (logger.isWarnEnabled()) from io.netty.channel.epoll.AbstractEpollStreamChannel, io.netty.channel.DefaultFileRegion, io.netty.channel.nio.AbstractNioChannel, io.netty.util.HashedWheelTimer, io.netty.handler.stream.ChunkedWriteHandler and io.netty.channel.udt.nio.NioUdtMessageConnectorChannel
Result:
Fixes#9456
Motivation:
At the moment we use the String representation of the IP to create the DatagramSocketAddress. This is not for free and we should better use the byte[] directly to reduce the overhead of parsing the String (and creating it in the first place)
Modifications:
Directly use byte[] as input for the DatagramSocketAddress
Result:
Less overhead when using Datagrams with native transports
Motivation:
The Netty classes are initialized at build time by default for GraalVM Native Image compilation. This is configured via the `--initialize-at-build-time=io.netty` option. While this reduces start-up time it can lead to some problems:
- The class initializer of `io.netty.buffer.PooledByteBufAllocator` looks at the maximum memory size to compute the size of internal buffers. If the class initializer runs during image generation, then the buffers are sized according to the very large heap size that the image generator uses, and Netty allocates several arrays that are 16 MByte. The fix is to initialize the following 3 classes at run time: `io.netty.buffer.PooledByteBufAllocator,io.netty.buffer.ByteBufAllocator,io.netty.buffer.ByteBufUtil`. This fix was dependent on a GraalVM Native Image fix that was included in 19.2.0.
- The class initializer of `io.netty.handler.ssl.util.ThreadLocalInsecureRandom` needs to be initialized at runtime to ensure that the generated values are trully random and not fixed for each generated image.
- The class initializers of `io.netty.buffer.AbstractReferenceCountedByteBuf` and `io.netty.util.AbstractReferenceCounted` compute field offsets. While the field offset recomputation is necessary for correct execution as a native image these initializers also have logic that depends on the presence/absence of `sun.misc.Unsafe`, e.g., via the `-Dio.netty.noUnsafe=true` flag. The fix is to push these initializers to runtime so that the field offset lookups (and the logic depending on them) run at run time. This way no manual substitutions are necessary either.
Modifications:
Add `META-INF/native-image` configuration files that correctly trigger the inialization of the above classes at run time via `--initialize-at-run-time=...` flags.
Result:
Fixes the initialisation issues described above for Netty executables built with GraalVM.
Motivation:
Currently when HttpPostStandardRequestDecoder throws a ErrorDataDecoderException during construction we leak memory. We need to ensure all is released correctly.
Modifications:
- Call destroy() if parseBody() throws and rethrow the ErrorDataDecoderException
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9513.
Motivation:
We need to also include the native-image configuration files in the netty all jar to be able to use it with GraalVM native.
Modifications:
Add files in META-INF/native-image as well
Result:
Fixes https://github.com/netty/netty/issues/9514
Motivation:
We currently try to access the the domain search list via reflection on windows which will print a illegal access warning when using Java9 and later.
Modifications:
Add a guard against the used java version.
Result:
Fixes https://github.com/netty/netty/issues/9500.
Motivation:
Right now you can cancel the Future returned by
`Http2StreamChannelBootstrap.open()` and that will race with the
registration of the stream channel with the event loop, potentially
culminating in an `IllegalStateException` and potential resource leak.
Modification:
Ensure that the returned promise is uncancellable.
Result:
Should no longer see `IllegalStateException`s.
Motivation:
We did not correctly pass all supplied parameters to the called constructor and so did not apply the timeout.
Modification:
Correctly pass on the parameters.
Result:
Use timeout
Motivation:
AbstractByteBuf.indexOf(...) currently delegates to ByteBufUtils.indexOf(...) which will create a new ByteBufProcessor on each call. This is done to reduce overhead of bounds-checks. Unfortunally while this reduces bounds checks it produces a lot of GC. We can just implement our own version in AbstractByteBuf which makes use of _getByte(...) and so does no bound checks as well but also not need to create any garbage.
Modifications:
Write optimized implementation of indexOf(...) for AbstractByteBuf
Result:
Fixes https://github.com/netty/netty/issues/9499.
Motivation:
In the release (4.1.37) we introduced Http2MultiplexHandler as a
replacement of Http2MultiplexCodec. This did split the frame parsing from
the multiplexing to allow a more flexible way to handle frames and to make
the code cleaner. Unfortunally we did miss to special handle this in
Http2ClientUpgradeCodec and so did not correctly add Http2MultiplexHandler
to the pipeline before calling Http2FrameCodec.onHttpClientUpgrade(...).
This did lead to the situation that we did not correctly receive the event
on the Http2MultiplexHandler and so did not correctly created the
Http2StreamChannel for the upgrade stream. Because of this we ended up
with an NPE if a frame was dispatched to the upgrade stream later on.
Modifications:
- Correctly add Http2MultiplexHandler to the pipeline before calling Http2FrameCodec.onHttpClientUpgrade(...)
Result:
Fixes#9495.
Motivation:
We should not only include the java source files but also the c source file in our source jars.
Modifications:
Add files from src/main/c as well
Result:
Fixes https://github.com/netty/netty/issues/9494
Motivation:
Some of the links in javadoc point to the obsolete drafts of HTTP/2
specifications. We should point them to the latest RFC 7540 or 7541.
Modifications:
Update links from `draft-ietf-httpbis-*` to the `rfc7540` and `rfc7541`.
Result:
Correct links in javadoc.
Motivation:
`HttpObjectDecoder` pre-checks that it doesn't request characters
outside of the `AppendableCharSequence`'s length. `0` is always allowed
because the minimal length of `AppendableCharSequence` is `1`. We can
legally skip index check by using
`AppendableCharSequence.charAtUnsafe(int)` in all existing cases in
`HttpObjectDecoder`.
Modifications:
- Use `AppendableCharSequence.charAtUnsafe(int)` instead of
`AppendableCharSequence.charAt(int)` in `HttpObjectDecoder`.
Result:
No unnecessary index checks in `HttpObjectDecoder`.
Motivation:
14607979f6 added tests for using ACCP but did miss to use the same unwrapping technique of exceptions as JdkSslEngineTest. This can lead to test-failures on specific JDK versions
Modifications:
Add the same unwrapping code
Result:
No more test failures
Motivation
The epoll transport was updated in #7834 to decouple setting of the
timerFd from the event loop, so that scheduling delayed tasks does not
require waking up epoll_wait. To achieve this, new overridable hooks
were added in the AbstractScheduledEventExecutor and
SingleThreadEventExecutor superclasses.
However, the minimumDelayScheduledTaskRemoved hook has no current
purpose and I can't envisage a _practical_ need for it. Removing
it would reduce complexity and avoid supporting this specific
API indefinitely. We can add something similar later if needed
but the opposite is not true.
There also isn't a _nice_ way to use the abstractions for
wakeup-avoidance optimizations in other EventLoops that don't have a
decoupled timer.
This PR replaces executeScheduledRunnable and
wakesUpForScheduledRunnable
with two new methods before/afterFutureTaskScheduled that have slightly
different semantics:
- They only apply to additions; given the current internals there's no
practical use for removals
- They allow per-submission wakeup decisions via a boolean return val,
which makes them easier to exploit from other existing EL impls (e.g.
NIO/KQueue)
- They are subjectively "cleaner", taking just the deadline parameter
and not exposing Runnables
- For current EL/queue impls, only the "after" hook is really needed,
but specialized blocking queue impls can conditionally wake on task
submission (I have one lined up)
Also included are further optimization/simplification/fixes to the
timerFd manipulation logic.
Modifications
- Remove AbstractScheduledEventExecutor#minimumDelayScheduledTaskRemoved()
and supporting methods
- Uplift NonWakeupRunnable and corresponding default wakesUpForTask()
impl from SingleThreadEventLoop to SingleThreadEventExecutor
- Change executeScheduledRunnable() to be package-private, and have a
final impl in SingleThreadEventExecutor which triggers new overridable
hooks before/afterFutureTaskScheduled()
- Remove unnecessary use of bookend tasks while draining the task queue
- Use new hooks to add simpler wake-up avoidance optimization to
NioEventLoop (primarily to demonstrate utility/simplicity)
- Reinstate removed EpollTest class
In EpollEventLoop:
- Refactor to use only the new afterFutureTaskScheduled() hook for
updating timerFd
- Fix setTimerFd race condition using a monitor
- Set nextDeadlineNanos to a negative value while the EL is awake and
use this to block timer changes from outside the EL. Restore the
known-set value prior to sleeping, updating timerFd first if necessary
- Don't read from timerFd when processing expiry event
Result
- Cleaner API for integrating with different EL/queue timing impls
- Fixed race condition to avoid missing scheduled wakeups
- Eliminate unnecessary timerFd updates while EL is awake, and
unnecessary expired timerFd reads
- Avoid unnecessary scheduled-task wakeups when using NIO transport
I did not yet further explore the suggestion of using
TFD_TIMER_ABSTIME for the timerFd.
Motivation:
Amazon lately released Amazon Corretto Crypto Provider, so we should include it in our testsuite
Modifications:
Add tests related to Amazon Corretto Crypto Provider
Result:
Test netty with Amazon Corretto Crypto Provider
Motivation:
Http post request may be encoded as 'multipart/form-data' without any files and consist mixed attributes only.
Modifications:
- Do not double release attributes
- Add unit test
Result:
Code does not throw an IllegalReferenceCountException.
Motivation
Currently an epoll_ctl syscall is made every time there is a change to
the event interest flags (EPOLLIN, EPOLLOUT, etc) of a channel. These
are only done in the event loop so can be aggregated into 0 or 1 such
calls per channel prior to the next call to epoll_wait.
Modifications
I think further streamlining/simplification is possible but for now I've
tried to minimize structural changes and added the aggregation beneath
the existing flag manipulation logic.
A new AbstractChannel#activeFlags field records the flags last set on
the epoll fd for that channel. Calls to setFlag/clearFlag update the
flags field as before but instead of calling epoll_ctl immediately, just
set or clear a bit for the channel in a new bitset in the associated
EpollEventLoop to reflect whether there's any change to the last set
value.
Prior to calling epoll_wait the event loop makes the appropriate
epoll_ctl(EPOLL_CTL_MOD) call once for each channel who's bit is set.
Result
Fewer syscalls, particularly in some auto-read=false cases. Simplified
error handling from centralization of these calls.
Motivation:
We need to ensure we replace WebSocketServerProtocolHandshakeHandler before doing the actual handshake as the handshake itself may complete directly and so forward pending bytes through the pipeline.
Modifications:
Replace the handler before doing the actual handshake.
Result:
Fixes https://github.com/netty/netty/issues/9471.
Motivation:
It is possible that the user uses a too big EDNS0 setting for the MTU and so we may receive a truncated datagram packet. In this case we should try to detect this and retry via TCP if possible
Modifications:
- Fix detecting of incomplete records
- Mark response as truncated if we did not consume the whole packet
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9365
Motivation:
AsciiString.contentEqualsIgnoreCase may return true for non-matching strings of equal length when offset is non zero.
Modifications:
- Correctly take offset into account
- Add unit test
Result:
Fixes#9475
Motivation:
If all we need is the FileChannel we should better use RandomAccessFile as FileInputStream and FileOutputStream use a finalizer.
Modifications:
Replace FileInputStream and FileOutputStream with RandomAccessFile when possible.
Result:
Fixes https://github.com/netty/netty/issues/8078.
Motivation:
In AbstractBoostrap, options and attrs are LinkedHashMap that are synchronized on for every read, copy/clone, write operation.
When a lot of connections are triggered concurrently on the same bootstrap instance, the synchronized blocks lead to contention, Netty IO threads get blocked, and performance may be severely degraded.
Modifications:
Use ConcurrentHashMap
Result:
Less contention. Fixes https://github.com/netty/netty/issues/9426
Motivation:
We should use the same java versions whenever we use CentOS 6 or 7 and also use the latest Java12 version
Modifications:
- Use same Java versions
- Use latest Java 12 version
- Remove old configs which are not used anymore
Result:
Docker cleanup
Motivation:
We should better update the flow-controller on Channel.read() to reduce overhead and memory overhead.
See https://github.com/netty/netty/pull/9390#issuecomment-513008269
Modifications:
Move updateLocalWindowIfNeeded() to doBeginRead()
Result:
Reduce memory overhead
Motivation
#1802 fixed ByteBuf implementations to ensure that the whole buffer
region is preserved when capacity is increased, not just the readable
part. The behaviour is still different however when the capacity is
_decreased_ - data outside the currently-readable region is zeroed.
Modifications
Update ByteBuf capacity(int) implementations to also copy the whole
buffer region when the new capacity is less than the current capacity.
Result
Consistent behaviour of ByteBuf#capacity(int) regardless of whether the
new capacity is greater than or less than the current capacity.
Motivation:
It was possible to produce a NPE when we for examples received more responses as requests as we did not check if the queue did not contain a method before trying to compare method names.
Modifications:
- Add extra null check
- Add unit tet
Result:
Fixes https://github.com/netty/netty/issues/9459
Motivation:
As we decorate the Http2FrameListener under the covers we should ensure the user can still access the original Http2FrameListener.
Modifications:
- Unwrap the Http2FrameListener in frameListener()
- Add unit test
Result:
Less suprises for users.
Motivation:
We should only ever close the underlying tcp socket once we received the envelope to ensure we never race in the test.
Modifications:
- Only close socket once we received the envelope
- Set REUSE_ADDR
Result:
More robust test
Motivation:
We did not correctly pass the mask parameters in all cases.
Modifications:
Correctly pass on parameters
Result:
Fixes https://github.com/netty/netty/issues/9463.
Motivation:
We recently introduced Http2ControlFrameLimitEncoderTest which did not correctly notify the goAway promises and so leaked buffers.
Modifications:
Correctly notify all promises and so release the debug data.
Result:
Fixes leak in HTTP2 test
Motivation:
EPOLL supports decoupling the timed wakeup mechanism from the selector call. The EPOLL transport takes advantage of this in order to offer more fine grained timer resolution. However we are current calling timerfd_settime on each call to epoll_wait and this is expensive. We don't have to re-arm the timer on every call to epoll_wait and instead only have to arm the timer when a task is scheduled with an earlier expiration than any other existing scheduled task.
Modifications:
- Before scheduled tasks are added to the task queue, we determine if the new
duration is the soonest to expire, and if so update with timerfd_settime. We
also drain all the tasks at the end of the event loop to make sure we service
any expired tasks and get an accurate next time delay.
- EpollEventLoop maintains a volatile variable which represents the next deadline to expire. This variable is modified inside the event loop thread (before calling epoll_wait) and out side the event loop thread (immediately to ensure proper wakeup time).
- Execute the task queue before the schedule task priority queue. This means we
may delay the processing of scheduled tasks but it ensures we transfer all
pending tasks from the task queue to the scheduled priority queue to run the
soonest to expire scheduled task first.
- Deprecate IORatio on EpollEventLoop, and drain the executor and scheduled queue on each event loop wakeup. Coupling the amount of time we are allowed to drain the executor queue to a proportion of time we process inbound IO may lead to unbounded queue sizes and unpredictable latency.
Result:
Fixes https://github.com/netty/netty/issues/7829
- In most cases this results in less calls to timerfd_settime
- Less event loop wakeups just to check for scheduled tasks executed outside the event loop
- More predictable executor queue and scheduled task queue draining
- More accurate and responsive scheduled task execution
