Motivation:
In the SslHandler we schedule a timeout at which we close the Channel if a timeout was detected during close_notify. Because this can race with notify the flushFuture we can see an IllegalStateException when the Channel is closed.
Modifications:
- Use a trySuccess() and tryFailure(...) to guard against race.
Result:
No more race.
Motivation:
We should not trigger channelWritabilityChanged during failing message when we are about to close the Channel as otherwise the use may try again writing even if the Channel is about to get closed.
Modifications:
Add new boolean param to ChannelOutboundBuffer.failFlushed(...) which allows to specify if we should notify or not.
Result:
channelWritabilityChanged is not triggered anymore if we cloe the Channel because of an IOException during write.
Motivation:
Previously, we deferred the closing of the Channel when we were flushing. This is problematic as this means that if the user adds a ChannelFutureListener, that will close the Channel, the closing will not happen until we are done with flushing. This can lead to more data is sent than expected.
Modifications:
- Do not defer closing when in flush
Result:
Correctly respect order of events and closing the Channel ASAP
Motivation:
The semantic of LocalChannel.doWrite(...) were a bit off as it notified the ChannelFuture before the data was actual moved to the peer buffer.
Modifications:
- Use our MPSC queue as inbound buffer
- Directly copy to data to the inbound buffer of the peer and either success or fail the promise after each copy.
Result:
Correct semantic and less memory copies.
Motiviation:
If user events or excpetions reach the tail end of the pipeline they are not released. This could result in buffer leaks.
Motivation:
- Use the ReferenceCountUtil.release to release objects for the userEventTriggered and exceptionCaught methods on DefaultChannelPipeline
Result:
2 less areas where buffer leaks can occur.
Motivation:
There are various known issues in netty-codec-dns:
- Message types are not interfaces, which can make it difficult for a
user to implement his/her own message implementation.
- Some class names and field names do not match with the terms in the
RFC.
- The support for decoding a DNS record was limited. A user had to
encode and decode by him/herself.
- The separation of DnsHeader from DnsMessage was unnecessary, although
it is fine conceptually.
- Buffer leak caused by DnsMessage was difficult to analyze, because the
leak detector tracks down the underlying ByteBuf rather than the
DnsMessage itself.
- DnsMessage assumes DNS-over-UDP.
- To send an EDNS message, a user have to create a new DNS record class
instance unnecessarily.
Modifications:
- Make all message types interfaces and add default implementations
- Rename some classes, properties, and constants to match the RFCs
- DnsResource -> DnsRecord
- DnsType -> DnsRecordType
- and many more
- Remove DnsClass and use an integer to support EDNS better
- Add DnsRecordEncoder/DnsRecordDecoder and their default
implementations
- DnsRecord does not require RDATA to be ByteBuf anymore.
- Add DnsRawRecord as the catch-all record type
- Merge DnsHeader into DnsMessage
- Make ResourceLeakDetector track AbstractDnsMessage
- Remove DnsMessage.sender/recipient properties
- Wrap DnsMessage with AddressedEnvelope
- Add DatagramDnsQuest and DatagramDnsResponse for ease of use
- Rename DnsQueryEncoder to DatagramDnsQueryEncoder
- Rename DnsResponseDecoder to DatagramDnsResponseDecoder
- Miscellaneous changes
- Add StringUtil.TAB
Result:
- Cleaner APi
- Can support DNS-over-TCP more easily in the future
- Reduced memory footprint in the default DnsQuery/Response
implementations
- Better leak tracking for DnsMessages
- Possibility to introduce new DnsRecord types in the future and provide
full record encoder/decoder implementation.
- No unnecessary instantiation for an EDNS pseudo resource record
Motivation:
Many projects need some kind a Channel/Connection pool implementation. While the protocols are different many things can be shared, so we should provide a generic API and implementation.
Modifications:
Add ChannelPool / ChannelPoolMap API and implementations.
Result:
Reusable / Generic pool implementation that users can use.
Motivation:
Because of a bug we missed to fail the connect future when doClose() is called. This can lead to a future which is never notified and so may lead to deadlocks in user-programs.
Modifications:
Correctly fail the connect future when doClose() is called and the connection was not established yet.
Result:
Connect future is always notified.
Motivation:
Each different *ChannelOption did extend ChannelOption in 4.0, which we changed in 4.1. This is a breaking change in terms of the API so we need to ensure we keep the old hierarchy.
Modifications:
- Let all *ChannelOption extend ChannelOption
- Add back constructor and mark it as @deprecated
Result:
No API breakage between 4.0 and 4.1
Related: #3464
Motivation:
When a connection attempt is failed,
NioSocketChannelUnsafe.closeExecutor() triggers a SocketException,
suppressing the channelUnregistered() event.
Modification:
Do not attempt to get SO_LINGER value when a socket is not open yet.
Result:
One less bug
Motivation:
At the moment when EmbeddedChannel is used and a ChannelHandler tries to schedule and task it will throw an UnsupportedOperationException. This makes it impossible to test these handlers or even reuse them with EmbeddedChannel.
Modifications:
- Factor out reusable scheduling code into AbstractSchedulingEventExecutor
- Let EmbeddedEventLoop and SingleThreadEventExecutor extend AbstractSchedulingEventExecutor
- add EmbbededChannel.runScheduledPendingTasks() which allows to run all scheduled tasks that are ready
Result:
Embeddedchannel is now usable even with ChannelHandler that try to schedule tasks.
Motivation:
We should allow to get a ChannelOption/AttributeKey from a String. This will make it a lot easier to make use of configuration files in applications.
Modifications:
- Add exists(...), newInstance(...) method to ChannelOption and AttributeKey and alter valueOf(...) to return an existing instance for a String or create one.
- Add unit tests.
Result:
Much more flexible usage of ChannelOption and AttributeKey.
Motivation:
As we plan to have other native transports soon (like a kqueue transport) we should move unix classes/interfaces out of the epoll package so we
introduce other implementations without breaking stuff before the next stable release.
Modifications:
Create a new io.netty.channel.unix package and move stuff over there.
Result:
Possible to introduce other native impls beside epoll.
Motivation:
If SO_LINGER is used shutdownOutput() and close() syscalls will block until either all data was send or until the timeout exceed. This is a problem when we try to execute them on the EventLoop as this means the EventLoop may be blocked and so can not process any other I/O.
Modifications:
- Add AbstractUnsafe.closeExecutor() which returns null by default and use this Executor for close if not null.
- Override the closeExecutor() in NioSocketChannel and EpollSocketChannel and return GlobalEventExecutor.INSTANCE if getSoLinger() > 0
- use closeExecutor() in shutdownInput(...) in NioSocketChannel and EpollSocketChannel
Result:
No more blocking of the EventLoop if SO_LINGER is used and shutdownOutput() or close() is called.
Motivation:
isRoot() is an expensive operation. We should avoid calling it if
possible.
Modifications:
Move the isRoot() checks to the end of the 'if' block, so that isRoot()
is evaluated only when really necessary.
Result:
isRoot() is evaluated only when SO_BROADCAST is set and the bind address
is anylocal address.
Related:
- 27a25e29f7
Motivation:
The commit mentioned above introduced a regression where
channelReadComplete() event is swallowed by a handler which was added
dynamically.
Modifications:
Do not suppress channelReadComplete() if the current handler's
channelRead() method was not invoked at all, so that a just-added
handler does not suppress channelReadComplete().
Result:
Regression is gone, and channelReadComplete() is invoked when necessary.
Motivation:
Even if a handler called ctx.fireChannelReadComplete(), the next handler
should not get its channelReadComplete() invoked if fireChannelRead()
was not invoked before.
Modifications:
- Ensure channelReadComplete() is invoked only when the handler of the
current context actually produced a message, because otherwise there's
no point of triggering channelReadComplete().
i.e. channelReadComplete() must follow channelRead().
- Fix a bug where ctx.read() was not called if the handler of the
current context did not produce any message, making the connection
stall. Read the new comment for more information.
Result:
- channelReadComplete() is invoked only when it makes sense.
- No stale connection
Motivation:
Because of a re-entrance bug in PendingWriteQueue it was possible to get the queue corrupted and also trigger an IllegalStateException caused by multiple recycling of the internal PendingWrite objects.
Modifications:
- Correctly guard against re-entrance
Result:
No more IllegalStateException possible
Motiviation:
When using domain sockets on linux it is supported to recv and send file descriptors. This can be used to pass around for example sockets.
Modifications:
- Add support for recv and send file descriptors when using EpollDomainSocketChannel.
- Allow to obtain the file descriptor for an Epoll*Channel so it can be send via domain sockets.
Result:
recv and send of file descriptors is supported now.
Motivation:
As the ByteBuf is not set to null after release it we may try to release it again in handleReadException()
Modifications:
- set ByteBuf to null to avoid another byteBuf.release() to be called in handleReadException()
Result:
No IllegalReferenceCountException anymore
Motivation:
Fix a minor documentation bug in
ChannelHandlerContext#fireChannelReadComplete.
Modifications:
ChannelHandlerContext#fireChannelReadComplete no longer references an
incorrect method in its javadoc.
Results:
Documentation is correct.
Motivation:
We only provided a constructor in DefaultFileRegion that takes a FileChannel which means the File itself needs to get opened on construction. This has the problem that if you want to write a lot of Files very fast you may end up with may open FD's even if they are not needed yet. This can lead to hit the open FD limit of the OS.
Modifications:
Add a new constructor to DefaultFileRegion which allows to construct it from a File. The FileChannel will only be obtained when transferTo(...) is called or the DefaultFileRegion is explicit open'ed via open() (this is needed for the native epoll transport)
Result:
Less resource usage when writing a lot of DefaultFileRegion.
Related: #3212
Motivation:
When SslHandler and ChunkedWriteHandler exists in a pipeline together,
it is possible that ChunkedWriteHandler.channelWritabilityChanged()
invokes SslHandler.flush() and vice versa. Because they can feed each
other (i.e. ChunkedWriteHandler.channelWritabilityChanged() ->
SslHandler.flush() -> ChunkedWriteHandler.channelWritabilityChanged() ->
..), they can fall into an inconsistent state due to reentrance (e.g.
bad MAC record at the remote peer due to incorrect ordering.)
Modifications:
- Trigger channelWritabilityChanged() using EventLoop.execute() when
there's a chance where channelWritabilityChanged() can cause a
reentrance issue
- Fix test failures caused by the modification
Result:
Fix the handler reentrance issues related with a
channelWritabilityChanged() event
Related: #3212
Motivation:
PendingWriteQueue.recycle() updates its data structure after triggering
a channelWritabilityChanged() event. It causes a rare corruption such as
double free when channelWritabilityChanged() method accesses the
PendingWriteQueue.
Modifications:
Update the state of PendingWriteQueue before triggering an event.
Result:
Fix a rare double-free problem
Related: #3190
Motivation:
When an outbound handler method raises an exception, its promise is
marked as failed. If the promise is done already, the exception is
logged.
When the promise is void, exceptionCaught() must be triggered to notify
a user. However, ChannelHandlerInvokerUtil simply swallows it.
Modifications:
Do not swallow an exception when the promise is void.
Result:
A user who uses a void promise for an outbound operation will be
notified on failure.
Related: #3189
Motivation:
OIO transport implementations block for at most 1 second to wait for
additional messages (or accepted connections).
However, because AbstractOioMessageChannel defers the channelRead()
events for the messages read so far until there's nothing to read up to
maxMessagesPerRead, any read operation will be followed by a 1-second
delay.
Modifications:
Fire channelRead() events as soon as doRead() returns so that there is
no 1 second delay between the actual read and the channelRead() event.
Result:
No more weird 1-second delay
Related: #3156
Motivation:
Let's say we have a channel with the following pipeline configuration:
HEAD --> [E1] H1 --> [E2] H2 --> TAIL
when the channel is deregistered, the channelUnregistered() methods of
H1 and H2 will be invoked from the executor thread of E1 and E2
respectively. To ensure that the channelUnregistered() methods are
invoked from the correct thread, new one-time tasks will be created
accordingly and be scheduled via Executor.execute(Runnable).
As soon as the one-time tasks are scheduled,
DefaultChannelPipeline.fireChannelUnregistered() will start to remove
all handlers from the pipeline via teardownAll(). This process is
performed in reversed order of event propagation. i.e. H2 is removed
first, and then H1 is removed.
If the channelUnregistered() event has been passed to H2 before H2 is
removed, a user does not see any problem.
If H2 has been removed before channelUnregistered() event is passed to
H2, a user will often see the following confusing warning message:
An exceptionCaught() event was fired, and it reached at the tail of
the pipeline. It usually means the last handler in the pipeline did
not handle the exception.
Modifications:
To ensure that the handlers are removed *after* all events are
propagated, traverse the pipeline in ascending order before performing
the actual removal.
Result:
A user does not get the confusing warning message anymore.
Motivation:
AbstractUnsafe considers two possibilities during channel registration. First,
the channel may be an outgoing connection, in which case it will be registered
before becoming active. Second, the channel may be an incoming connection in,
which case the channel will already be active when it is registered. To handle
the second case, AbstractUnsafe checks if the channel is active after
registration and calls ChannelPipeline.fireChannelActive() if so. However, if
an active channel is deregistered and then re-registered this logic causes a
second fireChannelActive() to be invoked. This is unexpected; it is reasonable
for handlers to assume that this method will only be invoked once per channel.
Modifications:
This change introduces a flag into AbstractUnsafe to recognize if this is the
first or a subsequent registration. ChannelPipeline.fireChannelActive() is only
possible for the first registration.
Result:
ChannelPipeline.fireChannelActive() is only called once.
Motivation:
Found performance issues via FindBugs and PMD.
Modifications:
- Removed unnecessary boxing/unboxing operations in DefaultTextHeaders.convertToInt(CharSequence) and DefaultTextHeaders.convertToLong(CharSequence). A boxed primitive is created from a string, just to extract the unboxed primitive value.
- Added a static modifier for DefaultHttp2Connection.ParentChangedEvent class. This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Added a static compiled Pattern to avoid compile it each time it is used when we need to replace some part of authority.
- Improved using of StringBuilders.
Result:
Performance improvements.
Motivation:
ChannelPromiseAggregator and ChannelPromiseNotifiers only allow
consumers to work with Channels as the result type. Generic versions
of these classes allow consumers to aggregate or broadcast the results
of an asynchronous execution with other result types.
Modifications:
Add PromiseAggregator and PromiseNotifier. Add unit tests for both.
Remove code in ChannelPromiseAggregator and ChannelPromiseNotifier and
modify them to extend the new base classes.
Result:
Consumers can now aggregate or broadcast the results of an asynchronous
execution with results types other than Channel.
Related: #2945
Motivation:
Some special handlers such as TrafficShapingHandler need to override the
writability of a Channel to throttle the outbound traffic.
Modifications:
Add a new indexed property called 'user-defined writability flag' to
ChannelOutboundBuffer so that a handler can override the writability of
a Channel easily.
Result:
A handler can override the writability of a Channel using an unsafe API.
For example:
Channel ch = ...;
ch.unsafe().outboundBuffer().setUserDefinedWritability(1, false);
Related: #2034
Motivation:
Some users want to mock Bootstrap (or ServerBootstrap), and thus they
should not be final but be fully overridable and extensible.
Modifications:
Remove finals wherever possible
Result:
@daschl is happy.
Related: #2964
Motivation:
Writing a zero-length FileRegion to an NIO channel will lead to an
infinite loop.
Modification:
- Do not write a zero-length FileRegion by protecting with proper 'if'.
- Update the testsuite
Result:
Another bug fixed
Motivation:
So far, we relied on the domain name resolution mechanism provided by
JDK. It served its purpose very well, but had the following
shortcomings:
- Domain name resolution is performed in a blocking manner.
This becomes a problem when a user has to connect to thousands of
different hosts. e.g. web crawlers
- It is impossible to employ an alternative cache/retry policy.
e.g. lower/upper bound in TTL, round-robin
- It is impossible to employ an alternative name resolution mechanism.
e.g. Zookeeper-based name resolver
Modification:
- Add the resolver API in the new module: netty-resolver
- Implement the DNS-based resolver: netty-resolver-dns
.. which uses netty-codec-dns
- Make ChannelFactory reusable because it's now used by
io.netty.bootstrap, io.netty.resolver.dns, and potentially by other
modules in the future
- Move ChannelFactory from io.netty.bootstrap to io.netty.channel
- Deprecate the old ChannelFactory
- Add ReflectiveChannelFactory
Result:
It is trivial to resolve a large number of domain names asynchronously.
Motivation:
When a datagram packet is sent to a destination where nobody actually listens to,
the server O/S will respond with an ICMP Port Unreachable packet.
The ICMP Port Unreachable packet is translated into PortUnreachableException by JDK.
PortUnreachableException is not a harmful exception that prevents a user from sending a datagram.
Therefore, we should not close a datagram channel when PortUnreachableException is caught.
Modifications:
- Do not close a channel when the caught exception is PortUnreachableException.
Result:
A datagram channel is not closed unexpectedly anymore.
Motivation:
JDK's exception messages triggered by a connection attempt failure do
not contain the related remote address in its message. We currently
append the remote address to ConnectException's message, but I found
that we need to cover more exception types such as SocketException.
Modifications:
- Add AbstractUnsafe.annotateConnectException() to de-duplicate the
code that appends the remote address
Result:
- Less duplication
- A transport implementor can annotate connection attempt failure
message more easily
Motivation:
There's no way to generate the name of a handler being newly added
automatically and reliably.
For example, let's say you have a routine that adds a set of handlers to
a pipeline using addBefore() or addAfter(). Because addBefore() and
addAfter() always require non-conflicting non-null handler name, making
the multiple invocation of the routine on the same pipeline is
non-trivial.
Modifications:
- If a user specifies null as the name of the new handler,
DefaultChannelPipeline generates one.
- Update the documentation of ChannelPipeline to match the new behavior
Result:
A user doesn't need to worry about name conflicts anymore.
Motiviation:
Before this change, autoRead was a volatile boolean accessed directly. Any thread that invoked the DefaultChannelConfig#setAutoRead(boolean) method would read the current value of autoRead, and then set a new value. If the old value did not match the new value, some action would be immediately taken as part of the same method call.
As volatile only provides happens-before consistency, there was no guarantee that the calling thread was actually the thread mutating the state of the autoRead variable (such that it should be the one to invoke the follow-up actions). For example, with 3 threads:
* Thread 1: get = false
* Thread 1: set = true
* Thread 1: invokes read()
* Thread 2: get = true
* Thread 3: get = true
* Thread 2: set = false
* Thread 2: invokes autoReadCleared()
* Event Loop receives notification from the Selector that data is available, but as autoRead has been cleared, cancels the operation and removes read interest
* Thread 3: set = true
This results in a livelock - autoRead is set true, but no reads will happen even if data is available (as readyOps). The only way around this livelock currently is to set autoRead to false, and then back to true.
Modifications:
Write access to the autoRead variable is now made using the getAndSet() method of an AtomicIntegerFieldUpdater, AUTOREAD_UPDATER. This also changed the type of the underlying autoRead variable to be an integer, as no AtomicBooleanFieldUpdater class exists. Boolean logic is retained by assuming that 1 is true and 0 is false.
Result:
There is no longer a race condition between retrieving the old value of the autoRead variable and setting a new value.
Motivation:
We used the wrong EventExecutor to notify for bind failures if a late registration was done.
Modifications:
Use the correct EventExecutor to notify and only use the GlobelEventExecutor if the registration fails itself.
Result:
The correct Thread will do the notification.
When a ChannelOutboundBuffer contains ByteBufs followed by a FileRegion,
removeBytes() will fail with a ClassCastException. It should break the
loop instead.
f31c630c8c was causing
SocketGatheringWriteTest to fail because it does not take the case where
an empty buffer exists in a gathering write.
When there is an empty buffer in a gathering write, the number of
buffers returned by ChannelOutboundBuffer.nioBuffer() and the actual
number of write attemps can differ.
To remove the write requests correctly, a byte transport must use
ChannelOutboundBuffer.removeBytes()
Motivation:
Because of an incorrect logic in teh EmbeddedChannel constructor it is not possible to use EmbeddedChannel with a ChannelInitializer as constructor argument. This is because it adds the internal LastInboundHandler to its ChannelPipeline before it register itself to the EventLoop.
Modifications:
First register self to EventLoop before add LastInboundHandler to the ChannelPipeline.
Result:
It's now possible to use EmbeddedChannel with ChannelInitializer.
Motivation:
Due a regression NioSocketChannel.doWrite(...) will throw a ClassCastException if you do something like:
channel.write(bytebuf);
channel.write(fileregion);
channel.flush();
Modifications:
Correctly handle writing of different message types by using the correct message count while loop over them.
Result:
No more ClassCastException
Motivation:
The previous fix did disable the caching of ByteBuffers completely which can cause performance regressions. This fix makes sure we use nioBuffers() for all writes in NioSocketChannel and so prevent data-corruptions. This is still kind of a workaround which will be replaced by a more fundamental fix later.
Modifications:
- Revert 4059c9f354
- Use nioBuffers() for all writes to prevent data-corruption
Result:
No more data-corruption but still retain the original speed.
Motivation:
At the moment we expand the ByteBuffer[] when we have more then 1024 ByteBuffer to write and replace the stored instance in its FastThreadLocal. This is not needed and may even harm performance on linux as IOV_MAX is 1024 and so this may cause the JVM to do an array copy.
Modifications:
Just exit the nioBuffers() method if we can not fit more ByteBuffer in the array. This way we will pick them up on the next call.
Result:
Remove uncessary array copy and simplify the code.
Motivation:
We cache the ByteBuffers in ChannelOutboundBuffer.nioBuffers() for the Entries in the ChannelOutboundBuffer to reduce some overhead. The problem is this can lead to data-corruption if an incomplete write happens and next time we try to do a non-gathering write.
To fix this we should remove the caching which does not help a lot anyway and just make the code buggy.
Modifications:
Remove the caching of ByteBuffers.
Result:
No more data-corruption.
Motivation:
At the moment it's only possible for a user to set the RecvByteBufAllocator for a Channel but not access the Handle once it is assigned. This makes it hard to write more flexible implementations.
Modifications:
Add a new method to the Channel.Unsafe to allow access the the used Handle for the Channel. The RecvByteBufAllocator.Handle is created lazily.
Result:
It's possible to write more flexible implementatons that allow to adjust stuff on the fly for a Handle that is used by a Channel
Motivation:
Sometimes ChannelHandler need to queue writes to some point and then process these. We currently have no datastructure for this so the user will use an Queue or something like this. The problem is with this Channel.isWritable() will not work as expected and so the user risk to write to fast. That's exactly what happened in our SslHandler. For this purpose we need to add a special datastructure which will also take care of update the Channel and so be sure that Channel.isWritable() works as expected.
Modifications:
- Add PendingWriteQueue which can be used for this purpose
- Make use of PendingWriteQueue in SslHandler
Result:
It is now possible to queue writes in a ChannelHandler and still have Channel.isWritable() working as expected. This also fixes#2752.
Motivation:
We did various changes related to the ChannelOutboundBuffer in 4.0 branch. This commit port all of them over and so make sure our branches are synced in terms of these changes.
Related to [#2734], [#2709], [#2729], [#2710] and [#2693] .
Modification:
Port all changes that was done on the ChannelOutboundBuffer.
This includes the port of the following commits:
- 73dfd7c01b
- 997d8c32d2
- e282e504f1
- 5e5d1a58fd
- 8ee3575e72
- d6f0d12a86
- 16e50765d1
- 3f3e66c31a
Result:
- Less memory usage by ChannelOutboundBuffer
- Same code as in 4.0 branch
- Make it possible to use ChannelOutboundBuffer with Channel implementation that not extends AbstractChannel
Motivation:
The PID_MAX_LIMIT on 64bit linux systems is 4194304 and on osx it is 99998. At the moment we use 65535 as an upper-limit which is too small.
Modifications:
Use 4194304 as max possible value
Result:
No more false-positives when try to detect current pid.
Motivation:
We have some inconsistency when handling writes. Sometimes we call ChannelOutboundBuffer.progress(...) also for complete writes and sometimes not. We should call it always.
Modifications:
Correctly call ChannelOuboundBuffer.progress(...) for complete and incomplete writes.
Result:
Consistent behavior
Motivation:
While benchmarking the native transport with gathering writes I noticed that it is quite slow. This is due the fact that we need to do a lot of array copies to get the buffers into the iov array.
Modification:
Introduce a new class calles IovArray which allows to fill buffers directly in a iov array that can be passed over to JNI without any array copies. This gives a nice optimization in terms of speed when doing gathering writes.
Result:
Big performance improvement when doing gathering writes. See the included benchmark...
Before:
[nmaurer@xxx]~% wrk/wrk -H 'Host: localhost' -H 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' -H 'Connection: keep-alive' -d 120 -c 256 -t 16 --pipeline 256 http://xxx:8080/plaintext
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 23.44ms 16.37ms 259.57ms 91.77%
Req/Sec 181.99k 31.69k 304.60k 78.12%
346544071 requests in 2.00m, 46.48GB read
Requests/sec: 2887885.09
Transfer/sec: 396.59MB
With this change:
[nmaurer@xxx]~% wrk/wrk -H 'Host: localhost' -H 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' -H 'Connection: keep-alive' -d 120 -c 256 -t 16 --pipeline 256 http://xxx:8080/plaintext
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 21.93ms 16.33ms 305.73ms 92.34%
Req/Sec 194.56k 33.75k 309.33k 77.04%
369617503 requests in 2.00m, 49.57GB read
Requests/sec: 3080169.65
Transfer/sec: 423.00MB
Motivation:
ChannelOutboundBuffer is basically a circular array queue of its entry
objects. Once an entry is created in the array, it is never nulled out
to reduce the allocation cost.
However, because it is a circular queue, the array almost always ends up
with as many entry instances as the size of the array, regardless of the
number of pending writes.
At worst case, a channel might have only 1 pending writes at maximum
while creating 32 entry objects, where 32 is the initial capacity of the
array.
Modifications:
- Reduce the initial capacity of the circular array queue to 4.
- Make the initial capacity of the circular array queue configurable
Result:
We spend 4 times less memory for entry objects under certain
circumstances.
Motivation:
At the moment NioSocketChannelOutboundBuffer.nioBuffers() / EpollSocketChannelOutboundBuffer.memoryAddresses() returns null if something is contained in the ChannelOutboundBuffer which is not a ByteBuf. This is a problem for two reasons:
1 - In the javadocs we state that it will never return null
2 - We may do a not optimal write as there may be things that could be written via gathering writes
Modifications:
Change NioSocketChannelOutboundBuffer.nioBuffers() / EpollSocketChannelOutboundBuffer.memoryAddresses() to never return null but have it contain all ByteBuffer that were found before the non ByteBuf. This way we can do a gathering write and also conform to the javadocs.
Result:
Better speed and also correct implementation in terms of the api.
Motivation:
Now Netty has a few problems with null values.
Modifications:
- Check HAProxyProxiedProtocol in HAProxyMessage constructor and throw NPE if it is null.
If HAProxyProxiedProtocol is null we will set AddressFamily as null. So we will get NPE inside checkAddress(String, AddressFamily) and it won't be easy to understand why addrFamily is null.
- Check File in DiskFileUpload.toString().
If File is null we will get NPE when calling toString() method.
- Check Result<String> in MqttDecoder.decodeConnectionPayload(...).
If !mqttConnectVariableHeader.isWillFlag() || !mqttConnectVariableHeader.hasUserName() || !mqttConnectVariableHeader.hasPassword() we will get NPE when we will try to create new instance of MqttConnectPayload.
- Check Unsafe before calling unsafe.getClass() in PlatformDependent0 static block.
- Removed unnecessary null check in WebSocket08FrameEncoder.encode(...).
Because msg.content() can not return null.
- Removed unnecessary null check in DefaultStompFrame(StompCommand) constructor.
Because we have this check in the super class.
- Removed unnecessary null checks in ConcurrentHashMapV8.removeTreeNode(TreeNode<K,V>).
- Removed unnecessary null check in OioDatagramChannel.doReadMessages(List<Object>).
Because tmpPacket.getSocketAddress() always returns new SocketAddress instance.
- Removed unnecessary null check in OioServerSocketChannel.doReadMessages(List<Object>).
Because socket.accept() always returns new Socket instance.
- Pass Unpooled.buffer(0) instead of null inside CloseWebSocketFrame(boolean, int) constructor.
If we will pass null we will get NPE in super class constructor.
- Added throw new IllegalStateException in GlobalEventExecutor.awaitInactivity(long, TimeUnit) if it will be called before GlobalEventExecutor.execute(Runnable).
Because now we will get NPE. IllegalStateException will be better in this case.
- Fixed null check in OpenSslServerContext.setTicketKeys(byte[]).
Now we throw new NPE if byte[] is not null.
Result:
Added new null checks when it is necessary, removed unnecessary null checks and fixed some NPE problems.
Motivation:
Fix some typos in Netty.
Modifications:
- Fix potentially dangerous use of non-short-circuit logic in Recycler.transfer(Stack<?>).
- Removed double 'the the' in javadoc of EmbeddedChannel.
- Write to log an exception message if we can not get SOMAXCONN in the NetUtil's static block.
Motivation:
As a DatagramChannel supports to write to multiple remote peers we must not close the Channel once a IOException accours as this error may be only valid for one remote peer.
Modification:
Continue writing on IOException.
Result:
DatagramChannel can be used even after an IOException accours during writing.
Motivation:
Because of a missing return statement we may produce a NPE when try to fullfill the connect ChannelPromise when it was fullfilled before.
Modification:
Add missing return statement.
Result:
No more NPE.
Motivation:
When system is in short of entrophy, the initialization of
ThreadLocalRandom can take at most 3 seconds. The initialization occurs
when ThreadLocalRandom.current() is invoked first time, which might be
much later than the moment when the application has started. If we
start the initialization of ThreadLocalRandom as early as possible, we
can reduce the perceived time taken for the retrieval.
Modification:
Begin the initialization of ThreadLocalRandom in InternalLoggerFactory,
potentially one of the firstly initialized class in a Netty application.
Make DefaultChannelId retrieve the current process ID before retrieving
the current machine ID, because retrieval of a machine ID is more likely
to use ThreadLocalRandom.current().
Use a dummy channel ID for EmbeddedChannel, which prevents many unit
tests from creating a ThreadLocalRandom instance.
Result:
We gain extra 100ms at minimum for initialSeedUniquifier generation. If
an application has its own initialization that takes long enough time
and generates good amount of entrophy, it is very likely that we will
gain a lot more.
Motivation:
When a bind fails AbstractBootstrap will use the GlobalEventExecutor to notify the ChannelPromise. We should use the EventLoop of the Channel if possible.
Modification:
Use EventLoop of the Channel if possible to use the correct Thread to notify and so guaranteer the right order of events.
Result:
Use the correct EventLoop for notification
Motivation:
There is no way for a ChannelHandler to check if the passed in ChannelPromise for a write(...) call is a VoidChannelPromise. This is a problem as some handlers need to add listeners to the ChannelPromise which is not possible in the case of a VoidChannelPromise.
Modification:
- Introduce ChannelFuture.isVoid() which will return true if it is not possible to add listeners or wait on the result.
- Add ChannelPromise.unvoid() which allows to create a ChannelFuture out of a void ChannelFuture which supports all the operations.
Result:
It's now easy to write ChannelHandler implementations which also works when a void ChannelPromise is used.
Motivation:
We use the nanoTime of the scheduledTasks to calculate the milli-seconds to wait for a select operation to select something. Once these elapsed we check if there was something selected or some task is ready for processing. Unfortunally we not take into account scheduled tasks here so the selection loop will continue if only scheduled tasks are ready for processing. This will delay the execution of these tasks.
Modification:
- Check if a scheduled task is ready after selecting
- also make a tiny change in NioEventLoop to not trigger a rebuild if nothing was selected because the timeout was reached a few times in a row.
Result:
Execute scheduled tasks on time.
Motivation:
When a select rebuild was triggered the reference to the SelectionKey is not updated in AbstractNioChannel. This will cause a CancelledKeyException later.
Modification:
Correctly update SelectionKey reference after rebuild
Result:
Fix exception
Motivation:
Recycler is used in many places to reduce GC-pressure but is still not as fast as possible because of the internal datastructures used.
Modification:
- Rewrite Recycler to use a WeakOrderQueue which makes minimal guaranteer about order and visibility for max performance.
- Recycling of the same object multiple times without acquire it will fail.
- Introduce a RecyclableMpscLinkedQueueNode which can be used for MpscLinkedQueueNodes that use Recycler
These changes are based on @belliottsmith 's work that was part of #2504.
Result:
Huge increase in performance.
4.0 branch without this commit:
Benchmark (size) Mode Samples Score Score error Units
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 00000 thrpt 20 116026994.130 2763381.305 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 00256 thrpt 20 110823170.627 3007221.464 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 01024 thrpt 20 118290272.413 7143962.304 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 04096 thrpt 20 120560396.523 6483323.228 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 16384 thrpt 20 114726607.428 2960013.108 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 65536 thrpt 20 119385917.899 3172913.684 ops/s
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 297.617 sec - in io.netty.microbench.internal.RecyclableArrayListBenchmark
4.0 branch with this commit:
Benchmark (size) Mode Samples Score Score error Units
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 00000 thrpt 20 204158855.315 5031432.145 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 00256 thrpt 20 205179685.861 1934137.841 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 01024 thrpt 20 209906801.437 8007811.254 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 04096 thrpt 20 214288320.053 6413126.689 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 16384 thrpt 20 215940902.649 7837706.133 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 65536 thrpt 20 211141994.206 5017868.542 ops/s
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 297.648 sec - in io.netty.microbench.internal.RecyclableArrayListBenchmark
Motivation:
LocalServerChannel.doClose() calls LocalChannelRegistry.unregister(localAddress); without check if localAddress is null and so produce a NPE when pass null the used ConcurrentHashMapV8
Modification:
Check for localAddress != null before try to remove it from Map. Also added a unit test which showed the stacktrace of the error.
Result:
No more NPE during doClose().
Motivation:
At the moment AbstractBoostrap.bind(...) will always use the GlobalEventExecutor to notify the returned ChannelFuture if the registration is not done yet. This should only be done if the registration fails later. If it completes successful we should just notify with the EventLoop of the Channel.
Modification:
Use EventLoop of the Channel if possible to use the correct Thread to notify and so guaranteer the right order of events.
Result:
Use the correct EventLoop for notification
