Motivation:
The status 308 is defined by RFC7538.
This RFC has currently the state Proposed Standard since 2 years, but the status code is already handle by all browsers (Chrome, Firefox, Edge, Safari, …).
To let developer handles easily this status code, it is added into this list.
Modifications:
Added this status code in the list of all status codes and changed the valudOf() method
Result:
Status code 308 included
__Motivation__
`HttpClientCodec` skips HTTP decoding on the connection after a successful HTTP CONNECT response is received.
This behavior follows the spec for a client but pragmatically, if one creates a client to use a proxy transparently, the codec becomes useless after HTTP CONNECT.
Ideally, one should be able to configure whether HTTP CONNECT should result in pass-through or not. This will enable client writers to continue using HTTP decoding even after HTTP CONNECT.
__Modification__
Added overloaded constructors to accept `parseHttpPostConnect`. If this parameter is `true` then the codec continues decoding even after a successful HTTP CONNECT.
Also fixed a bug in the codec that was incrementing request count post HTTP CONNECT but not decrementing it on response. Now, the request count is only incremented if the codec is not `done`.
__Result__
Easier usage by HTTP client writers who wants to connect to a proxy but still decode HTTP for their users for subsequent requests.
Motivation:
Some JUnit assert calls can be replaced by simpler.
Modifications:
Replacement with a more suitable methods.
Result:
More informative JUnit reports.
Motivation:
HttpServerKeepAliveHandler throws unexpected error when I do ctx.writeAndFlush(msg, ctx.voidPromise()); where msg is with header "Connection:close".
Modification:
HttpServerKeepAliveHandler does promise.unvoid() before adding close listener.
Result:
No error for VoidChannelPromise with HttpServerKeepAliveHandler. Fixes [#6698].
Motivation:
It would be more flexible to make getCharset and getMimeType code usable not only for HttpMessage entity but just for any CharSequence. This will improve usability in general purpose code and will help to avoid multiple fetching of ContentType header from a message. It could be done in an external code once and CharSequence method versions could be applied.
Modification:
Expose HttpUtil#getMimeType, HttpUtil#getCharsetAsString, HttpUtil#getCharset versions which works with CharSequence. New methods are reused in the old ones which work with HttpMessage entity.
Result:
More flexible methods set with a good code reusing.
Motivation:
WebSocket decoding throws exceptions on failure that should cause the
pipline to close. These are currently ignored in the
`WebSocketProtocolHandler` and `WebSocketServerProtocolHandler`. In
particular, this means that messages exceding the max message size will
cause the channel to close with no reported failure.
Modifications:
Re-fire the event just before closing the socket to allow it to be
handled appropriately.
Result:
Closes [#3063].
Motivation:
If Content-Encoding: IDENTITY is used we should not try to compress the http message but just let it pass-through.
Modifications:
Remove "!"
Result:
Fixes [#6689]
It is generally useful to have origin http servers respond to
"expect: continue-100" as soon as possible but applications without a
HttpObjectAggregator in their pipelines must use boiler plate to do so.
Modifications:
Introduce the HttpServerExpectContinueHandler handler to make it easier.
Result:
Less boiler plate for http application authors.
Motivation:
DiskFileUpload creates temporary files for storing user uploads containing the user provided file name as part of the temporary file name. While most security problems are prevented by using "new File(userFileName).getName()" a small risk for bugs or security issues remains.
Modifications:
Use a constant string as file name and rely on the callers use of File.createTemp to ensure unique disk file names.
Result:
A slight security improvement at the cost of a little more obfuscated temp file names.
Motivation:
We miss to retain a slice before return it to the user and so an reference count error may accour later on.
Modifications:
Use readRetainedSlice(...) and so ensure we retain the buffer before hand it of to the user.
Result:
Fixes [#6626].
Motivation:
Commit #d675febf07d14d4dff82471829f974369705655a introduced a regression in QueryStringEncoder, resulting in whitespace being converted into a literal `+` sign instead of `%20`.
Modification:
Modify `encodeComponent` to pattern match and replace on the result of the call to `URLEncoder#encode`
Result:
Fixes regression
Motivation:
https://tools.ietf.org/html/rfc7230#section-3.3.2 states that a 204 response MUST NOT include a Content-Length header. If the HTTP version permits keep alive these responses should be treated as keeping the connection alive even if there is no Content-Length header.
Modifications:
- HttpServerKeepAliveHandler#isSelfDefinedMessageLength should account for 204 respones
Result:
Fixes https://github.com/netty/netty/issues/6549.
Motivation:
Currently netty is receiving HTTP request by ByteBuf and store it as "CharSequence" on HttpObjectDecoder. During this operation, all character on ByteBuf is moving to char[] without breaking encoding.
But in process() function, type casting from byte to char does not consider msb (sign-bit). So the value over 127 can be casted wrong value. (ex : 0xec in byte -> 0xffec in char). This is type casting bug.
Modification:
Fix type casting
Result:
Non-latin characters work.
Motivation:
The updated HTTP/1.x RFC allows for header values to be CSV and separated by OWS [1]. CombinedHttpHeaders should remove this OWS on insertion.
[1] https://tools.ietf.org/html/rfc7230#section-7
Modification:
CombinedHttpHeaders doesn't account for the OWS and returns it back to the user as part of the value.
Result:
Fixes#6452
Motivation:
We used some deprecated Mockito methods.
Modifications:
- Replace deprecated method usage
- Some cleanup
Result:
No more usage of deprecated Mockito methods. Fixes [#6482].
Motivation:
Some classes have fields which can be local.
Modifications:
Convert fields to the local variable when possible.
Result:
Clean up. More chances for young generation or scalar replacement.
Motivation:
We only need to add the port to the HOST header value if its not a standard port.
Modifications:
- Only add port if needed.
- Fix parsing of ipv6 address which is enclosed by [].
Result:
Fixes [#6426].
Motivation:
Make code easier to read, make WebSocketServerProtocolHandshakeHandler.getWebSocketLocation method faster.
Modification:
WebSocket path check moved to separate method. Get header operation moved out from concat operation.
Result:
WebSocketServerProtocolHandshakeHandler.getWebSocketLocation is faster as OptimizeStringConcat could be applied. Code easier to read.
Motivation:
QueryStringDecoder and QueryStringEncoder contained some code that could either cleaned-up or optimized.
Modifications:
- Fix typos in exception messages and javadocs
- Precompile Pattern
- Make use of StringUtil.EMPTY_STRING
Result:
Faster and cleaner code.
Motivation:
Calling a static method is faster then dynamic
Modifications:
Add 'static' keyword for methods where it missed
Result:
A bit faster method calls
Motivation:
We have our own ThreadLocalRandom implementation to support older JDKs . That said we should prefer the JDK provided when running on JDK >= 7
Modification:
Using ThreadLocalRandom implementation of the JDK when possible.
Result:
Make use of JDK implementations when possible.
Motivation:
The allowMaskMismatch parameter used throughout websocketx allows frames
with noncompliant masks when set to true, not false.
Modification:
Changed the javadoc comment everywhere it appears.
Result:
Fixes#6387
Motivation:
Today, the HTTP codec in Netty responds to HTTP/1.1 requests containing
an "expect: 100-continue" header and a content-length that exceeds the
max content length for the server with a 417 status (Expectation
Failed). This is a violation of the HTTP specification. The purpose of
this commit is to address this situation by modifying the HTTP codec to
respond in this situation with a 413 status (Request Entity Too
Large). Additionally, the HTTP codec ignores expectations in the expect
header that are currently unsupported. This commit also addresses this
situation by responding with a 417 status.
Handling the expect header is tricky business as the specification (RFC
2616) is more complicated than it needs to be. The specification defines
the legitimate values for this header as "100-continue" and defines the
notion of expectatation extensions. Further, the specification defines a
417 status (Expectation Failed) and this is where implementations go
astray. The intent of the specification was for servers to respond with
417 status when they do not support the expectation in the expect
header.
The key sentence from the specification follows:
The server MUST respond with a 417 (Expectation Failed) status if
any of the expectations cannot be met or, if there are other
problems with the request, some other 4xx status.
That is, a server should respond with a 417 status if and only if there
is an expectation that the server does not support (whether it be
100-continue, or another expectation extension), and should respond with
another 4xx status code if the expectation is supported but there is
something else wrong with the request.
Modifications:
This commit modifies the HTTP codec by changing the handling for the
expect header in the HTTP object aggregator. In particular, the codec
will now respond with 417 status if any expectation other than
100-continue is present in the expect header, the codec will respond
with 413 status if the 100-continue expectation is present in the expect
header and the content-length is larger than the max content length for
the aggregator, and otherwise the codec will respond with 100 status.
Result:
The HTTP codec can now be used to correctly reply to clients that send a
100-continue expectation with a content-length that is too large for the
server with a 413 status, and servers that use the HTTP codec will now
no longer ignore expectations that are not supported (any value other
than 100-continue).
Motivation:
Netty 4.1 introduced AsciiString and defines HttpHeaderNames constants
as such.
It would be convenient to be able to pass them to `exposeHeaders` and
`allowedRequestHeaders` directly without having to call `toString`.
Modifications:
Add `exposeHeaders` and `allowedRequestHeaders` overloads that take a
`CharSequence`.
Result:
More convenient API
Motivation:
DefaultCookie currently used an undocumented magic value for undefined
maxAge.
Clients need to be able to identify such value so they can implement a
proper CookieJar.
Ideally, we should add a `Cookie::isMaxAgeDefined` method but I guess
we can’t add a new method without breaking API :(
Modifications:
Add a new constant on `Cookie` interface so clients can use it to
compare with value return by `Cookie.maxAge` and decide if `maxAge` was
actually defined.
Result:
Clients have a better documented way to check if the maxAge attribute
was defined.
Motivation:
We used various mocking frameworks. We should only use one...
Modifications:
Make usage of mocking framework consistent by only using Mockito.
Result:
Less dependencies and more consistent mocking usage.
Motivation:
HttpObjectAggregator yields full HTTP messgaes (AggregatedFullHttpMessages) that don't respect decoder result when copied/replaced.
Modifications:
Copy the decoding result over to a new instance produced by AggregatedFullHttpRequest.replace or AggregatedFullHttpResponse.replace .
Result:
DecoderResult is now copied over when an original AggregatedFullHttpMessage is being replaced (i.e., AggregatedFullHttpRequest.replace or AggregatedFullHttpResponse.replace is being called).
New unit tests are passing on this branch but are failing on master.
Motivation:
HttpUtil.setTransferEncodingChunked could add a second Transfer-Encoding
header if one was already present. While this is technically valid, it
does not appear to be the intent of the method.
Result:
Only one Transfer-Encoding header is present after calling this method.
Motivation:
In Netty, currently, the HttpPostRequestEncoder only supports POST, PUT, PATCH and OPTIONS, while the RFC 7231 allows with a warning that GET, HEAD, DELETE and CONNECT use a body too (but not TRACE where it is explicitely not allowed).
The RFC in chapter 4.3 says:
"A payload within a XXX request message has no defined semantics;
sending a payload body on a XXX request might cause some existing
implementations to reject the request."
where XXX can be replaced by one of GET, HEAD, DELETE or CONNECT.
Current usages, on particular in REST mode, tend to use those extra HttpMethods for such queries.
So this PR proposes to remove the current restrictions, leaving only TRACE as explicitely not supported.
Modification:
In the constructor, where the test is done, replacing all by checking only against TRACE, and adding one test to check that all methods are supported or not.
Result:
Fixes#6138.
Motivation:
cb139043f3 introduced special handling of response to HEAD requests. Due a bug we failed to handle FullHttpResponse correctly.
Modifications:
Correctly handle FullHttpResponse for HEAD requests.
Result:
Works as expected.
Motivation:
We should have a unit test which explicitly tests a HTTP message being split between multiple ByteBuf objects.
Modifications:
- Add a unit test to HttpRequestDecoderTest which splits a request between 2 ByteBuf objects
Result:
More unit test coverage for HttpObjectDecoder.
Motivation:
Enables optional .startsWith() matching of req.uri() with websocketPath.
Modifications:
New checkStartsWith boolean option with default false value added to both WebSocketServerProtocolHandler and WebSocketServerProtocolHandshakeHandler. req.uri() matching is based on this option.
Result:
By default old behavior matching via .equal() is preserved. To use checkStartsWith use constructor shortcut: new WebSocketServerProtocolHandler(websocketPath, true) or fill this flag on full form of constructor among other options.
request with a 'content-encoding: chunked' header
Motivation:
It is valid to send a response to a HEAD request that contains a transfer-encoding: chunked header, but it is not valid to include a body, and there is no way to do this using the netty4 HttpServerCodec.
The root cause is that the netty4 HttpObjectEncoder will transition to the state ST_CONTENT_CHUNK and the only way to transition back to ST_INIT is through the encodeChunkedContent method which will write the terminating length (0\r\n\r\n\r\n), a protocol error when responding to a HEAD request
Modifications:
- Keep track of the method of the request and depending on it handle the response differently when encoding it.
- Added a unit test.
Result:
Correclty handle HEAD responses that are chunked.
Motivation:
According to https://www.ietf.org/rfc/rfc2388.txt 4.4, filename after "content-disposition" is optional and arbitrary (does not need to match a real filename).
Modifications:
This change supports an extra addBodyFileUpload overload to precise the filename (default to File.getName). If empty or null this argument should be ignored during encoding.
Result:
- A backward-compatible addBodyFileUpload(String, File, String, boolean) to use file.getName() as filename.
- A new addBodyFileUpload(String, String, File, String, boolean) overload to precise filename
- Couple of tests for the empty use case
Motivation:
IntelliJ issues several warnings.
Modifications:
* `ClientCookieDecoder` and `ServerCookieDecoder`:
* `nameEnd`, `valueBegin` and `valueEnd` don't need to be initialized
* `keyValLoop` loop doesn't been to be labelled, as it's the most inner one (same thing for labelled breaks)
* Remove `if (i != headerLen)` as condition is always true
* `ClientCookieEncoder` javadoc still mention old logic
* `DefaultCookie`, `ServerCookieEncoder` and `DefaultHttpHeaders` use ternary ops that can be turned into simple boolean ones
* `DefaultHeaders` uses a for(int) loop over an array. It can be turned into a foreach one as javac doesn't allocate an iterator to iterate over arrays
* `DefaultHttp2Headers` and `AbstractByteBuf` `equal` can be turned into a single boolean statement
Result:
Cleaner code
Motivation:
* DefaultHeaders from netty-codec has some duplicated logic for header date parsing
* Several classes keep on using deprecated HttpHeaderDateFormat
Modifications:
* Move HttpHeaderDateFormatter to netty-codec and rename it into HeaderDateFormatter
* Make DefaultHeaders use HeaderDateFormatter
* Replace HttpHeaderDateFormat usage with HeaderDateFormatter
Result:
Faster and more consistent code
Motivation:
code assumes a numeric value of 0 means no digits were read between separators, which fails for timestamps like 00:00:00.
also code accepts invalid timestamps like 0:0:000
Modifications:
explicitly check for number of digits between separators instead of relying on the numeric value.
also add tests.
Result:
timestamps with 00 successfully parse, timestamps with 000 no longer
Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
Motivation:
The method HttpUtil.getCharsetAsString(...) is missleading as its return type is CharSequence and not String.
Modifications:
Deprecate HttpUtil.getCharsetAsString(...) and introduce HttpUtil.getCharsetAsSe
quence(...).
Result:
Less confusing method name.
Motivation:
* RFC6265 defines its own parser which is different from RFC1123 (it accepts RFC1123 format but also other ones). Basically, it's very lax on delimiters, ignores day of week and timezone. Currently, ClientCookieDecoder uses HttpHeaderDateFormat underneath, and can't parse valid cookies such as Github ones whose expires attribute looks like "Sun, 27 Nov 2016 19:37:15 -0000"
* ServerSideCookieEncoder currently uses HttpHeaderDateFormat underneath for formatting expires field, and it's slow.
Modifications:
* Introduce HttpHeaderDateFormatter that correctly implement RFC6265
* Use HttpHeaderDateFormatter in ClientCookieDecoder and ServerCookieEncoder
* Deprecate HttpHeaderDateFormat
Result:
* Proper RFC6265 dates support
* Faster ServerCookieEncoder and ClientCookieDecoder
* Faster tool for handling headers such as "Expires" and "Date"
Motiviation:
We used ReferenceCountUtil.releaseLater(...) in our tests which simplifies a bit the releasing of ReferenceCounted objects. The problem with this is that while it simplifies stuff it increase memory usage a lot as memory may not be freed up in a timely manner.
Modifications:
- Deprecate releaseLater(...)
- Remove usage of releaseLater(...) in tests.
Result:
Less memory needed to build netty while running the tests.
Motivation:
If the wsURL contains an encoded query, it will be decoded when generating the raw path. For example if the wsURL is http://test.org/path?a=1%3A5, the returned raw path would be /path?a=1:5
Modifications:
Use wsURL.getRawQuery() rather than wsURL.getQuery()
Result:
rawPath will now return /path?a=1%3A5
Motivation:
Some commons values are missing from HttpHeader values constants.
Modifications:
- Add constants for "application/json" Content-Type
- Add constants for "gzip,deflate" Content-Encoding
Result:
More HttpHeader values constants available, both in
`HttpHeaders.Values` and `HttpHeaderValues`.
Motivation:
The HttpObjectAggregator never appends a 'Connection: close' header to
the response of oversized messages even though in the majority of cases
its going to close the connection.
Modification:
This PR addresses that by ensuring the requisite header is present when
the connection is going to be closed.
Result:
Gracefully signal that we are about to close the connection.
Motivation:
We need to ensure we not add the Transfer-Encoding header if the HttpMessage is EOF terminated.
Modifications:
Only add the Transfer-Encoding header if an Content-Length header is present.
Result:
Correctly handle HttpMessage that is EOF terminated.
Motivation:
We want to reject the upgrade as quickly as possible, so that we can
support streamed responses.
Modifications:
Reject the upgrade as soon as we inspect the headers if they're wrong,
instead of waiting for the entire response body.
Result:
If a remote server doesn't know how to use the http upgrade and tries to
responsd with a streaming response that never ends, the client doesn't
buffer forever, but can instead pass it along. Fixes#5954
Motivation:
the build doesnt seem to enforce this, so they piled up
Modifications:
removed unused import lines
Result:
less unused imports
Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
Motivation:
The Javadocs of HttpUtil.getContentLength(HttpMessage, long) and its int overload state that the provided default value is returned if the Content-Length value is not a number. NumberFormatException is thrown instead.
Modifications:
Correctly handle when the value is not a number.
Result:
API works as stated in javadocs.
Motivation:
HttpObjectDecoder maintains a resetRequested flag which is used to determine if internal state should be reset when a decode occurs. However after a reset is done the resetRequested flag is not set to false. This leads to all data after this point being discarded.
Modifications:
- Set resetRequested to false when a reset is done
Result:
HttpObjectDecoder can still function after a reset.
Motivation:
As discussed in #5738, developers need to concern themselves with setting
connection: keep-alive on the response as well as whether to close a
connection or not after writing a response. This leads to special keep-alive
handling logic in many different places. The purpose of the HttpServerKeepAliveHandler
is to allow developers to add this handler to their pipeline and therefore
free themselves of having to worry about the details of how Keep-Alive works.
Modifications:
Added HttpServerKeepAliveHandler to the io.netty.handler.codec.http package.
Result:
Developers can start using HttpServerKeepAliveHandler in their pipeline instead
of worrying about when to close a connection for keep-alive.
Motivation:
As described in #5734
Before this change, if the server had to do some sort of setup after a
handshake was completed based on handshake's information, the only way
available was to wait (in a separate thread) for the handshaker to be
added as an attribute to the channel. Too much hassle.
Modifications:
Handshake completed event need to be stateful now, so I've added a tiny
class holding just the HTTP upgrade request and the selected subprotocol
which is fired as an event after the handshake has finished.
I've also deprecated the old enum used as stateless event and I left the
code that fires it for backward compatibility. It should be removed in
the next mayor release.
Result:
It should be much simpler now to do initialization stuff based on
subprotocol or request headers on handshake completion. No asynchronous
waiting needed anymore.
Motivation:
The CorsHandler currently closes the channel when it responds to a preflight (OPTIONS)
request or in the event of a short circuit due to failed validation.
Especially in an environment where there's a proxy in front of the service this causes
unnecessary connection churn.
Modifications:
CorsHandler now uses HttpUtil to determine if the connection should be closed
after responding and to set the Connection header on the response.
Result:
Channel will stay open when the CorsHandler responds unless the client specifies otherwise
or the protocol version is HTTP/1.0
Motivation:
Documentation was added in #2401 to aid developers in understanding
how HttpObjectAggregator works and that it needs an encoder before it.
In #2471 it was pointed out that the documentation added can actually
add to the confusion and that it might have a typo.
This is an attempt at clearing up that confusion. Feedback is welcome.
Modifications:
- Adjust class level javadoc for HttpObjectAggregator
* Remove reference to HttpRequestEncoder
* Point out when HttpResponseEncoder is needed
* Point out that either HttpRequestDecoder or HttpResponseDecoder is needed
* Make clear everything must be added before HttpObjectAggregator
* Mention HttpServerCodec
Result:
Avoid confusion about dependencies for HttpObjectAggregator on the pipeline.
Motivation:
The CorsHandler currently closes the channel when it responds to a preflight (OPTIONS)
request or in the event of a short circuit due to failed validation.
Especially in an environment where there's a proxy in front of the service this causes
unnecessary connection churn.
Modifications:
CorsHandler now uses HttpUtil to determine if the connection should be closed
after responding
Result:
Channel will stay open when the CorsHandler responds unless the client specifies otherwise
or the protocol version is HTTP/1.0
Motivation:
RFC 6265 does not state that cookie names must be case insensitive.
Modifications:
Fix io.netty.handler.codec.http.cookie.DefaultCookie#equals() method to
use case sensitive String#equals() and String#compareTo().
Result:
It is possible to parse several cookies with same names but with
different cases.
Motivation:
The CorsHandler currently returns the Access-Control-Allow-Headers
header as on a Non-Preflight CORS request (Simple request).
As per the CORS specification the Access-Control-Allow-Headers header
should only be returned on Preflight requests. (not on simple requests).
https://www.w3.org/TR/2014/REC-cors-20140116/#access-control-allow-headers-response-headerhttp://www.html5rocks.com/static/images/cors_server_flowchart.png
Modifications:
Modified CorsHandler.java to not add the Access-Control-Allow-Headers
header when responding to Non-preflight CORS request.
Result:
Access-Control-Allow-Headers header will not be returned on a Simple
request (Non-preflight CORS request).
Motivation:
There are few duplicated byte[] CRLF fields in code.
Modifications:
Removed duplicated fields as they could be inherited from parent encoder.
Result:
Less static fields.
Motivation :
Unboxing operations allocate unnecessary objects when it could be avoided.
Modifications:
Replaced Float.valueOf with Number.parseFloat where possible.
Result:
Less unnecessary objects allocations.
Motivation:
retainSlice() currently does not unwrap the ByteBuf when creating the ByteBuf wrapper. This effectivley forms a linked list of ByteBuf when it is only necessary to maintain a reference to the unwrapped ByteBuf.
Modifications:
- retainSlice() and retainDuplicate() variants should only maintain a reference to the unwrapped ByteBuf
- create new unit tests which generally verify the retainSlice() behavior
- Remove unecessary generic arguments from AbstractPooledDerivedByteBuf
- Remove unecessary int length member variable from the unpooled sliced ByteBuf implementation
- Rename the unpooled sliced/derived ByteBuf to include Unpooled in their name to be more consistent with the Pooled variants
Result:
Fixes https://github.com/netty/netty/issues/5582
Motivation:
Currently, QueryStringDecoder#path simply returns the path info as is, without decoding it as the Javadoc states.
Modifications:
* Make QueryStringDecoder#path decode the path info.
* Add tests to QueryStringDecoderTest.
Result:
QueryStringDecoder#path now decodes the path info as expected.
Motivation:
DiskFileUpload and MemoryFileUpload.equals(...) are broken.
Modifications:
Fix implementation and add unit test.
Result:
Equals method are correct now.
Motivation:
We don't have an argument named {@code value} but have {@code set} and
{@code expected} in HttpHeaders and HttpUtil respectively.
Modifications:
I replaced {@code value} to {@code set} and {@code expected} in HttpHeaders
and HttpUtil respectively.
Result:
Now javadoc says;
If {@code set} is {@code true}, the {@code "Expect: 100-continue"} header is
set and all other previous {@code "Expect"} headers are removed. Otherwise,
all {@code "Expect"} headers are removed completely. in HttpHeaders
If {@code expected} is {@code true}, the {@code "Expect: 100-continue"} header
is set and all other previous {@code "Expect"} headers are removed. Otherwise,
all {@code "Expect"} headers are removed completely. in HttpUtil
Motivation:
These methods were recently deprecated. However, they remained in use in several locations in Netty's codebase.
Modifications:
Netty's code will now access the bootstrap config to get the group or child group.
Result:
No impact on functionality.
Motivation:
We use pre-instantiated exceptions in various places for performance reasons. These exceptions don't include a stacktrace which makes it hard to know where the exception was thrown. This is especially true as we use the same exception type (for example ChannelClosedException) in different places. Setting some StackTraceElements will provide more context as to where these exceptions original and make debugging easier.
Modifications:
Set a generated StackTraceElement on these pre-instantiated exceptions which at least contains the origin class and method name. The filename and linenumber are specified as unkown (as stated in the javadocs of StackTraceElement).
Result:
Easier to find the origin of a pre-instantiated exception.
Motivation:
When HTTPS is used we should use https in the sec-websocket-origin / origin header
Modifications:
- Correctly generate the sec-websocket-origin / origin header
- Add unit tests.
Result:
Generate correct header.
`HttpContentDecoder` was removing `Content-Length` header but not adding a `Transfer-Encoding` header which goes against the HTTP spec.
Added `Transfer-Encoding` header with value `chunked` when `Content-Length` is removed.
Modified existing unit test to also check for this condition.
Compliance with HTTP spec.
Motivation:
When using HttpContentCompressor and the HttpResponse is protocol version 1.0, HttpContentEncoder.encode() should not set the transfer-encoding header to chunked. Chunked transfer-encoding is not valid for HTTP 1.0 - this causes ERR_CONTENT_DECODING_FAILED errors in chrome and similar failures in IE.
Modifications:
Skip HTTP/1.0 messages
Result:
Be able to serve HTTP/1.0 as well when HttpContentEncoder is in the pipeline.
Motivation:
Its completly fine for ChunkedInput.readChunk(...) to return null to indicate there is currently not any data to read. We need to handle this in HttpChunkedInput to not produce a NPE when constructing the HttpContent.
Modifications:
If readChunk(...) return null just return null as well.
Result:
No more NPE.
Motivation:
I cherry-picked 819b26b too soon. There were entries added to a deprecated class which should only go into the non-deprecated version of the class.
Modifications:
- Remove the static final variables that were added as duplicates to the deprecated class
Result:
Deprecated code does not grown in volume without need.
Motivation:
Some commons values are missing from HttpHeader values constants.
Modifications:
- Add constants for "application/json" Content-Type
- Add constants for "gzip,deflate" Content-Encoding
Result:
More HttpHeader values constants available, both in
`HttpHeaders.Values` and `HttpHeaderValues`.
Motivation:
Support fetches data chunk by chunk for use with WebSocket chunked transfers.
Modifications:
Create a WebSocketChunkedInput.java that add to io.netty.handler.codec.http.websocketx package
Result:
The WebSocket transfers/fetches data chunk by chunk.
Motivation:
JCTools supports both non-unsafe, unsafe versions of queues and JDK6 which allows us to shade the library in netty-common allowing it to stay "zero dependency".
Modifications:
- Remove copy paste JCTools code and shade the library (dependencies that are shaded should be removed from the <dependencies> section of the generated POM).
- Remove usage of OneTimeTask and remove it all together.
Result:
Less code to maintain and easier to update JCTools and less GC pressure as the queue implementation nt creates so much garbage
Motivation:
When the channel is closed while we still decode the headers we currently not preserve correct message sequence. In this case we should generate an invalid message with a current cause.
Modifications:
Create an invalid message with a PrematureChannelClosureException as cause when the channel is closed while we decode the headers.
Result:
Correct message sequence preserved and correct DecoderResult if the channel is closed while decode headers.
Motivation:
The user may specify to use a different allocator then the default. In this case we need to ensure it is shared when creating the EmbeddedChannel inside of a ChannelHandler
Modifications:
Use the config of the "original" Channel in the EmbeddedChannel and so share the same allocator etc.
Result:
Same type of buffers are used.
Motivation:
At the moment the user is responsible to increase the writer index of the composite buffer when a new component is added. We should add some methods that handle this for the user as this is the most popular usage of the composite buffer.
Modifications:
Add new methods that autoamtically increase the writerIndex when buffers are added.
Result:
Easier usage of CompositeByteBuf.
Motivation:
The HPACK code currently disallows empty header names. This is not explicitly forbidden by the HPACK RFC https://tools.ietf.org/html/rfc7541. However the HTTP/1.x RFC https://tools.ietf.org/html/rfc7230#section-3.2 and thus HTTP/2 both disallow empty header names, and so this precondition check should be moved from the HPACK code to the protocol level.
HPACK also requires that string literals which are huffman encoded must be treated as an encoding error if the string has more than 7 trailing padding bits https://tools.ietf.org/html/rfc7541#section-5.2, but this is currently not enforced.
Result:
- HPACK to allow empty header names
- HTTP/1.x and HTTP/2 header validation should not allow empty header names
- Enforce max of 7 trailing padding bits
Result:
Code is more compliant with the above mentioned RFCs
Fixes https://github.com/netty/netty/issues/5228
Related: #4333#4421#5128
Motivation:
slice(), duplicate() and readSlice() currently create a non-recyclable
derived buffer instance. Under heavy load, an application that creates a
lot of derived buffers can put the garbage collector under pressure.
Modifications:
- Add the following methods which creates a non-recyclable derived buffer
- retainedSlice()
- retainedDuplicate()
- readRetainedSlice()
- Add the new recyclable derived buffer implementations, which has its
own reference count value
- Add ByteBufHolder.retainedDuplicate()
- Add ByteBufHolder.replace(ByteBuf) so that..
- a user can replace the content of the holder in a consistent way
- copy/duplicate/retainedDuplicate() can delegate the holder
construction to replace(ByteBuf)
- Use retainedDuplicate() and retainedSlice() wherever possible
- Miscellaneous:
- Rename DuplicateByteBufTest to DuplicatedByteBufTest (missing 'D')
- Make ReplayingDecoderByteBuf.reject() return an exception instead of
throwing it so that its callers don't need to add dummy return
statement
Result:
Derived buffers are now recycled when created via retainedSlice() and
retainedDuplicate() and derived from a pooled buffer
Motivation:
At the moment we let the IllegalArgumentException escape when parsing form parameters. This is not expected.
Modifications:
Correctly catch IllegalArgumentException and rethrow as ErrorDataDecoderException.
Result:
Throw correct exception.
Motivation:
Currently the way a 'null' origin, a request that most often indicated
that the request is coming from a file on the local file system, is
handled is incorrect. We are currently returning a wildcard origin '*'
but should be returning 'null' for the 'Access-Control-Allow-Origin'
which is valid according to the specification [1].
Modifications:
Updated CorsHandler to add a 'null' origin instead of the '*' origin in
the case the request origin is 'null.
Result:
All test pass and the CORS example as does the cors.html example if you
try to serve it by opening the file directly in a web browser.
[1]
https://www.w3.org/TR/cors/#access-control-allow-origin-response-header
Motivation:
Checking if a key exists on a TreeMap has a Big O of "log 2 N",
doing it twice is not cheap.
Modifications:
Get the key instead which has the same cost and check if it is null.
Result:
Faster code due to one expensive operation removed.
Motivation:
We missed to reset the decoder when asked for it in HttpObjectDecoder and so sometimes could produce more then one LastHttpContent in a sequence during channelInactive.
This did show up as AssertionError:
22:22:35.499 [nioEventLoopGroup-3-1] WARN i.n.channel.DefaultChannelPipeline - An exceptionCaught() event was fired, and it reached at the tail of the pipeline. It usually means the last handler in the pipeline did not handle the exception.
java.lang.AssertionError: null
at io.netty.handler.codec.http.HttpObjectAggregator.decode(HttpObjectAggregator.java:205) ~[classes/:na]
at io.netty.handler.codec.http.HttpObjectAggregator.decode(HttpObjectAggregator.java:57) ~[classes/:na]
at io.netty.handler.codec.MessageToMessageDecoder.channelRead(MessageToMessageDecoder.java:89) ~[classes/:na]
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:292) [classes/:na]
at io.netty.channel.AbstractChannelHandlerContext.fireChannelRead(AbstractChannelHandlerContext.java:278) [classes/:na]
at io.netty.channel.CombinedChannelDuplexHandler$DelegatingChannelHandlerContext.fireChannelRead(CombinedChannelDuplexHandler.java:428) [classes/:na]
at io.netty.handler.codec.ByteToMessageDecoder.fireChannelRead(ByteToMessageDecoder.java:277) [classes/:na]
at io.netty.handler.codec.ByteToMessageDecoder.channelInputClosed(ByteToMessageDecoder.java:343) [classes/:na]
at io.netty.handler.codec.ByteToMessageDecoder.channelInactive(ByteToMessageDecoder.java:309) [classes/:na]
at io.netty.handler.codec.http.HttpClientCodec$Decoder.channelInactive(HttpClientCodec.java:228) [classes/:na]
at io.netty.channel.CombinedChannelDuplexHandler.channelInactive(CombinedChannelDuplexHandler.java:213) [classes/:na]
...
Modifications:
Correctly reset decoder.
Result:
Correctly only produce one LastHttpContent per sequence.
Motivation:
When upgrading h2c, I found that sometimes both of http2 settings frame and http response message was arrived before receiving upgrade success event. It was because ByteToMessageDecoder propagated its internally buffered message to the next handler when removing itself from pipeline.(refer to ByteToMessageDecoder#handlerRemoved)
I think it's better to propagate upgrade success event when handling 101 switching protocol response.
Modifications:
Upgrade success event will be propagated before removing source codec.
Result:
It guarantees that upgrade success event will be arrived first at the next handler.
Motivation:
There is a spelling error in FileRegion.transfered() as it should be transferred().
Modifications:
Deprecate old method and add a new one.
Result:
Fix typo and can remove the old method later.
Motivation:
DefaultCookie constructor performs a name validation that doesn’t match
RFC6265. Moreover, such validation is already performed in strict
encoders and decoders.
Modifications:
Drop DefaultCookie name validation, rely on encoders and decoders.
Result:
no more duplicate broken validation
Motivation:
We missed to pass the decrement value to the wrapped FullHttpRequest and so missed to decrement the reference count in the correct way.
Modifications:
Correctly pass the decrement value to the wrapped request.
Result:
UpgradeEvent.release(decrement) works as expected.
Motivation:
HttpServerUpgradeHandler.UpgradeCodec.prepareUpgradeResponse should allow to abort the upgrade and so just continue with using HTTP. Beside this we should only pass in the response HttpHeaders as this is inline with the docs.
Modifications:
- UpgradeCodec.prepareUpgradeResponse now allows to return a boolean and so allows to specifiy if the upgrade should take place.
- Change the param from FullHttpResponse to HttpHeaders to be inline with the javadocs.
Result:
More flexible and correct handling of upgrades.
Motivation:
upgradeTo(...) takes the response as paramater, but the respone itself was already written to the Channel. This gives the user the impression the response can be changed or even act on it which may not be safe anymore once it was written and has been released.
Modifications:
Remove the response param from the method.
Result:
Less confusion and safer usage.
Motivation:
The current HttpPostMultipartRequestDecoder can decode multipart/form-data parts with a Content-Type that specifies a charset. When this charset is invalid the Charset.forName() throws an unchecked UnsupportedCharsetException. This exception is not catched by the decoder. It should actually be rethrown as an ErrorDataDecoderException, because the developer using the API would expect this validation failure to be reported as such.
Modifications:
Add a catch block for UnsupportedCharsetException and rethrow it as an ErrorDataDecoderException.
Result:
UnsupportedCharsetException are now rethrown as ErrorDataDecoderException.
Motivation:
It will be easier to support websockets in server application by using WebSocketServerProtocolHandshakeHandler class and not reinvent its functionality. But currently it handles all http requests as if they were websocket handshake requests.
Modifications:
Check if http request path is equals to adjusted websocket path.
Fixed example of websocket server implementation.
Result:
WebSocketServerProtocolHandshakeHandler handles only websocket handshake requests.
Motivation:
If the input buffer is empty we should not have decodeLast(...) call decode(...) as the user may not expect this.
Modifications:
- Not call decode(...) in decodeLast(...) if the input buffer is empty.
- Add testcases.
Result:
decodeLast(...) will not call decode(...) if input buffer is empty.
Modifications:
When constructing the FullHttpMessage pass in the ByteBuf to use via the ByteBufAllocator assigned via the context.
Result:
The ByteBuf assigned to the FullHttpMessage can now be configured as a pooled/unpooled, direct/heap based ByteBuf via the ByteBufAllocator used.
Motivation:
See #4855
Modifications:
Unfortunately, unescapeCsv cannot be used here because the input could be a CSV line like `"a,b",c`. Hence this patch adds unescapeCsvFields to parse a CSV line and split it into multiple fields and unescaped them. The unit tests should define the behavior of unescapeCsvFields.
Then this patch just uses unescapeCsvFields to implement `CombinedHttpHeaders.getAll`.
Result:
`CombinedHttpHeaders.getAll` will return the unescaped values of a header.
Motivation:
b714297a44 introduced ChannelInputShutdownEvent support for HttpObjectDecoder. However this should have been added to the super class ByteToMessageDecoder, and ByteToMessageDecoder should not propegate a channelInactive event through the pipeline in this case.
Modifications:
- Move the ChannelInputShutdownEvent handling from HttpObjectDecoder to ByteToMessageDecoder
- ByteToMessageDecoder doesn't call ctx.fireChannelInactive() on ChannelInputShutdownEvent
Result:
Half closed events are treated more generically, and don't get translated into a channelInactive pipeline event.
Motivation:
The initial buffer size used to decode HTTP objects is currently fixed at 128. This may be too small for some use cases and create a high amount of overhead associated with resizing/copying. The user should be able to configure the initial size as they please.
Modifications:
- Make HttpObjectDecoder's AppendableCharSequence initial size configurable
Result:
Users can more finely tune initial buffer size for increased performance or to save memory.
Fixes https://github.com/netty/netty/issues/4807
Motivation:
"CorsConfigBuilder.allowNullOrigin()" should be public otherwise people can not set it. See #4835
Modifications:
Make "CorsConfigBuilder.allowNullOrigin()" public.
Result:
The user can call "CorsConfigBuilder.allowNullOrigin()" now.
Motivation:
If the Connection header contains multiple values (which is valid) we fail to detect a websocket upgrade
Modification:
- Add new method which allows to check if a header field contains a specific value (and also respect multiple header values)
- Use this method to detect handshake
Result:
Correct detect handshake if Connection header contains multiple values (seperated by ',').
