Support TCP Fast Open for clients and make SslHandler take advantage
Motivation:
- TCP Fast Open allow us to send a small amount of data along side the initial SYN packet when establishing a TCP connection.
- The TLS Client Hello packet is small enough to fit in there, and is also idempotent (another requirement for using TCP Fast Open), so if we can save a round-trip when establishing TLS connections when using TFO.
Modification:
- Add support for client-side TCP Fast Open for Epoll, and also lowers the Linux kernel version requirements to 3.6.
- When adding the SslHandler to a pipeline, if TCP Fast Open is enabled for the channel (and the channel is not already active) then start the handshake early by writing it to the outbound buffer.
- An important detail to note here, is that the outbound buffer is not flushed at this point, like it would for normal handshakes. The flushing happens later as part of establishing the TCP connection.
Result:
- It is now possible for clients (on epoll) to open connections with TCP Fast Open.
- The SslHandler automatically detects when this is the case, and now send its Client Hello message as part of the initial data in the TCP Fast Open flow when available, saving a round-trip when establishing TLS connections.
Co-authored-by: Colin Godsey <crgodsey@gmail.com>
Motivation:
The current netty's graalvm dependency version is too low, so you need to upgrade the plugin
Modification:
Upgrade Graalvm version to the latest version, please review this pr, thank you
Result:
Use up-to-date version.
Co-authored-by: xingrufei <xingrufei@sogou-inc.com>
Motivation:
The testGlobalWriteThrottle is flaky and failed our build multiple times now. Lets disable it for now until we had time to investigate
Modifications:
Disable flaky test
Result:
Less failures during build
Motivation:
When etcResolver/hosts files are parsed, FileInputStream.read(...) is internally called by
- UnixResolverDnsServerAddressStreamProvider#parseEtcResolverSearchDomains
- UnixResolverDnsServerAddressStreamProvider#parseEtcResolverOptions
- HostsFileParser#parse
This will cause the error below when BlockHound is enabled
reactor.blockhound.BlockingOperationError: Blocking call! java.io.FileInputStream#readBytes
at java.io.FileInputStream.readBytes(FileInputStream.java)
at java.io.FileInputStream.read(FileInputStream.java:255)
Modifications:
- Add whitelist entries to BlockHound configuration
- Fix typos in UnixResolverDnsServerAddressStreamProvider
- Add tests
Result:
Fixes#11004
* Revert "Add a profile for debugging tests that run from Maven (#11011)"
This reverts commit 83895f0f
The same functionality is already natively available in surefire, by adding the `-Dmaven.surefire.debug` flag to Maven.
* Update surefire/failsafe version
These new versions copes better when our tests prints to STDOUT, and disturbs the progress processing that these plugins do.
Motivation:
At the moment we always set SSL_OP_NO_TICKET when building our context. The problem with this is that this also disables resumption for TLSv1.3 in BoringSSL as it only supports stateless resumption for TLSv1.3 which uses tickets.
We should better clear this option when TLSv1.3 is enabled to be able to resume sessions. This is also inline with the OpenJDK which enables this for TLSv1.3 by default as well.
Modifications:
Check for enabled protocols and if TLSv1.3 is set clear SSL_OP_NO_TICKET.
Result:
Be able to resume sessions for TLSv1.3 when using BoringSSL.
Motivation:
File.createTempFile(String, String)` will create a temporary file in the system temporary directory if the 'java.io.tmpdir'. The permissions on that file utilize the umask. In a majority of cases, this means that the file that java creates has the permissions: `-rw-r--r--`, thus, any other local user on that system can read the contents of that file.
This can be a security concern if any sensitive data is stored in this file.
This was reported by Jonathan Leitschuh <jonathan.leitschuh@gmail.com> as a security problem.
Modifications:
Use Files.createTempFile(...) which will use safe-defaults when running on java 7 and later. If running on java 6 there isnt much we can do, which is fair enough as java 6 shouldnt be considered "safe" anyway.
Result:
Create temporary files with sane permissions by default.
Motivation:
ReadOnlyByteBuf and ReadOnlyByteBuffer are not writable, but their writableBytes
related methods return non-zero values. This is inconsistent with the behavior
of these buffer types.
Modifications:
- ReadOnlyByteBuf and ReadOnlyByteBuffer writableBytes related methods should
return 0
Result:
More correct ReadOnlyByteBuf and ReadOnlyByteBuffer behavior with respect to
writability.
Motivation:
DecodeHexBenchmark needs to be less branch-predictor friendly
to mimic the "real" behaviour while decoding
Modifications:
DecodeHexBenchmark uses a larger sets of inputs, picking them at
random on each iteration and the benchmarked method is made !inlineable
Result:
DecodeHexBenchmark is more trusty while showing the performance
difference between different decoding methods
Motivation:
when customer need large of 'byteBuf.capacity' in [7168, 8192], the size of 'chunk.subpages' may be inflated when large of byteBuf be released, not consistent with other 'byteBuf.capacity'
Modification:
when maxNumElems == 1 need consider remove from pool
Result:
Fixes#10896.
Co-authored-by: zxingy <zxingy@servyou.com.cn>
Motivation:
The changes introduced in 1c230405fd did cause various issues while the fix itself is not considered critical. For now it is considered the best to just rollback and investigate more.
Modifications:
- Revert changes done in 1c230405fd (and later) for
the post decoders.
- Ensure we give memory back to the system as soon as possible in a safe manner
Result:
Fixes https://github.com/netty/netty/issues/10973
Motivation:
It was not 100% clear who is responsible calling close() on the InputStream.
Modifications:
Clarify javadocs.
Result:
Related to https://github.com/netty/netty/issues/10974
Co-authored-by: Chris Vest <christianvest_hansen@apple.com>
Motivation:
TLS_FALSE_START slightly changes the "flow" during handshake which may cause suprises for the end-user. We should better disable it by default again and later add a way to enable it for the user.
Modification:
This reverts commit 514d349e1f.
Result:
Restore "old flow" during TLS handshakes.
Allow and skip null handlers when adding a vararg list of handlers
Motivation
Allowing null handlers allows for more convenient idioms in
conditionally adding handlers, e.g.,
ch.pipeline().addLast(
new FooHandler(),
condition ? new BarHandler() : null,
new BazHandler()
);
Modifications
* Change addFirst(..) and addLast(..) to skip null handlers, rather than
break or short-circuit.
* Add new unit tests.
Result
* Makes addFirst(..) and addLast(..) behavior more consistent
* Resolves https://github.com/netty/netty/issues/10728
Motivation:
We should add some more NULL checks to ensure we not SEGV in some cases
Modifications:
Add more NULL checks
Result:
More robust implementation
Motivation:
We didnt correctly filter out TLSv1.3 ciphers when TLSv1.3 is not enabled.
Modifications:
- Filter out ciphers that are not supported due the selected TLS version
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/10911
Co-authored-by: Bryce Anderson <banderson@twitter.com>
Motivation:
The testWriteAfterShutdownOutputNoWritabilityChange() failed a few times on the CI randomly. Let's skip it for now while we investigate and see if there is anything we can do to make the test less flaky on the CI.
Modifications:
Add @Ignore on the testWriteAfterShutdownOutputNoWritabilityChange method
Result:
Less flaky CI
Motivation:
We did have the architecture hardcoded in the dependency which is not correct as this will let the build fail on Applie Silicion (m1). Also we did miss some dependencies on other BSDs
Modifications:
- Fix classifier
- Add missing dependencies
Result:
Be able to build on Apple Silicon (m1)
Motivation:
We need to ensure we copy the attributes and options when bootstrap the channel as otherwise we may change the underlying Entry.
This is similar to what was reported in https://github.com/netty/netty-incubator-codec-quic/issues/152.
Modifications:
- Do a copy and re-use methods
- Add unit tests
Result:
Don't affect attributes / options of channels that are already bootstrapped
Motivation:
If the given port is already bound, the PcapWriteHandlerTest will sometimes fail.
Modification:
Use a dynamic port using `0`, which is more reliable
Result:
Less Flaky
Motivation:
We currently append extensions to the user defined "sec-websocket-extensions" headers. This can cause duplicated entries.
Modifications:
* Replace existing `WebSocketExtensionUtil#appendExtension` private helper with a new `computeMergeExtensionsHeaderValue`. User defined parameters have higher precedence.
* Add tests (existing method wasn't tested)
* Reuse code for both client and server side (code was duplicated).
Result:
No more duplicated entries when user defined extensions overlap with the ones Netty generated.
Motivation:
Exception occurs in the MQTT message builder class (`io.netty.handler.codec.mqtt.MqttMessageBuilders`) when trying to create a message with packetId > 32767
Modification:
-add method that takes int
- deprecate old methods that take short.
Result:
Fixes#10929 .
Motivation:
We should override the get*ApplicationProtocol() methods in ReferenceCountedOpenSslEngine to make it easier for users to obtain the selected application protocol
Modifications:
Add missing overrides
Result:
Easier for the user to get the selected application protocol (if any)
Motivation:
We should expose some methods as protected to make it easier to write custom SslContext implementations.
This will be reused by the code for https://github.com/netty/netty-incubator-codec-quic/issues/97
Modifications:
- Add protected to some static methods which are useful for sub-classes
- Remove some unused methods
- Move *Wrapper classes to util package and make these public
Result:
Easier to write custom SslContext implementations
Motivation:
https://github.com/netty/netty/pull/10765 added support for push promise and priority frames when using the Http2FrameCodec. Unfortunally it didnt correctly guard against the possibility to receive a priority frame for an non-existing stream, which resulted in a NPE
Modifications:
- Ignore priority frame for non existing stream
- Correctly implement equals / hashcode for DefaultHttp2PriorityFrame
- Add unit tests
Result:
Fixes https://github.com/netty/netty/issues/10941
Motivation:
We had multiple bugs in JdkZlibDecoder which could lead to decoding errors when the data was received in a fragmentated manner.
Modifications:
- Correctly handle skipping of comments
- Correctly handle footer / header decoding
- Add unit test that verifies the correct handling of fragmentation
Result:
Fixes https://github.com/netty/netty/issues/10875
Motivation:
We produced a lot of noise during loading native libraries as we always included the stacktrace if we could not load by one mechanism. We should better just not include the stacktrace in the debugging logging if one mechanism fails. We will log all the stacks anyway when all of the mechanisms fail.
Modifications:
Make logging less aggressive
Result:
Less confusing behaviour for the end-user
Motivation:
We should use GracefulShutdown when we try to create a stream and fail it because the stream space is exhausted as we may still want to process the active streams.
Modifications:
- Use graceful shutdown
- Add unit test
Result:
More graceful handling of stream creation failure due stream space exhaustation
Motivation:
Internally UnixResolverDnsServerAddressStreamProvider#parse calls FileInputStream.read(...)
when parsing the etcResolverFiles.
This will cause the error below when BlockHound is enabled
reactor.blockhound.BlockingOperationError: Blocking call! java.io.FileInputStream#readBytes
at java.io.FileInputStream.readBytes(FileInputStream.java)
at java.io.FileInputStream.read(FileInputStream.java:255)
Modifications:
- Add whitelist entry to BlockHound configuration
- Add test
Result:
Fixes#10925
Motiviation:
We need to ensure we only register the methods for unix-native-common once as otherwise it may have strange side-effects.
Modifications:
- Add extra method that should be called to signal that we need to register the methods. The registration will only happen once.
- Adjust code to make use of it.
Result:
No more problems due incorrect registration of these methods.
Motivation:
As shown in the past we need to verify we actually can load the native as otherwise we may introduce regressions.
Modifications:
- Add new maven module which tests loading of native modules
- Add job that will also test loading on aarch64
Result:
Less likely to introduce regressions related to loading native code in the future
Motivation:
We need to ensure we always drain the error stack when a callback throws as otherwise we may pick up the error on a different SSL instance which uses the same thread.
Modifications:
- Correctly drain the error stack if native method throws
- Add a unit test which failed before the change
Result:
Always drain the error stack
Motivation:
We can add some status badge and also should clarify requirements.
Modifictations:
- Add status badge
- Clarify requirements
Result:
Cleanup docs
Motivation:
New versions of `Bouncy Castle` libraries are out and we should upgrade to them.
Modification:
Upgraded all `Bouncy Castle` libraries to the latest version.
Result:
The latest versions of `Bouncy Castle` libraries.
Fixes#10905.
Motivation:
`mvn package` on Windows fails if there are some `dependency-reduced-pom.xml` files generated by the previous build.
`mvn clean package` does not help because it does not remove those files at the clean phase.
Modifications:
Use the correct file pattern for the suppression filters.
Result:
Following `mvn package` runs well on Windows.
Motivation:
Right now, we don't have to handle Push Promise Read in `Http2FrameCodec`. Push Promise is one of the key features of HTTP/2 and we should support it in our `Http2FrameCodec`.
Modification:
Added `Http2PushPromiseFrame` and `Http2PushPromiseFrame` to handle Push Promise and Promise Frame.
Result:
Fixes#10748
Motivation:
A race detector discovered a data race in GlobalEventExecutor present in
netty 4.1.51.Final:
```
Write of size 4 at 0x0000cea08774 by thread T103:
#0 io.netty.util.internal.DefaultPriorityQueue.poll()Lio/netty/util/internal/PriorityQueueNode; DefaultPriorityQueue.java:113
#1 io.netty.util.internal.DefaultPriorityQueue.poll()Ljava/lang/Object; DefaultPriorityQueue.java:31
#2 java.util.AbstractQueue.remove()Ljava/lang/Object; AbstractQueue.java:113
#3 io.netty.util.concurrent.AbstractScheduledEventExecutor.pollScheduledTask(J)Ljava/lang/Runnable; AbstractScheduledEventExecutor.java:133
#4 io.netty.util.concurrent.GlobalEventExecutor.fetchFromScheduledTaskQueue()V GlobalEventExecutor.java:119
#5 io.netty.util.concurrent.GlobalEventExecutor.takeTask()Ljava/lang/Runnable; GlobalEventExecutor.java:106
#6 io.netty.util.concurrent.GlobalEventExecutor$TaskRunner.run()V GlobalEventExecutor.java:240
#7 io.netty.util.internal.ThreadExecutorMap$2.run()V ThreadExecutorMap.java:74
#8 io.netty.util.concurrent.FastThreadLocalRunnable.run()V FastThreadLocalRunnable.java:30
#9 java.lang.Thread.run()V Thread.java:835
#10 (Generated Stub) <null>
Previous read of size 4 at 0x0000cea08774 by thread T110:
#0 io.netty.util.internal.DefaultPriorityQueue.size()I DefaultPriorityQueue.java:46
#1 io.netty.util.concurrent.GlobalEventExecutor$TaskRunner.run()V GlobalEventExecutor.java:263
#2 io.netty.util.internal.ThreadExecutorMap$2.run()V ThreadExecutorMap.java:74
#3 io.netty.util.concurrent.FastThreadLocalRunnable.run()V FastThreadLocalRunnable.java:30
#4 java.lang.Thread.run()V Thread.java:835
#5 (Generated Stub) <null>
```
The race is legit, but benign. To trigger it requires a TaskRunner to
begin exiting and set 'started' to false, more work to be scheduled
which starts a new TaskRunner, that work then needs to schedule
additional work which modifies 'scheduledTaskQueue', and then the
original TaskRunner checks 'scheduledTaskQueue'. But there is no danger
to this race as it can only produce a false negative in the condition
which causes the code to CAS 'started' which is thread-safe.
Modifications:
Delete problematic references to scheduledTaskQueue. The only way
scheduledTaskQueue could be modified since the last check is if another
TaskRunner is running, in which case the current TaskRunner doesn't
care.
Result:
Data-race free code, and a bit less code to boot.
Motivation:
The CONNACK message builder `ConnAckBuilder` doesn't provide a smooth way to assign the message properties. This PR try to provide an simpler way to create them, in a lazy way.
Modification:
This PR permit to store properties in the ConnAck message, collecting them and inserting during the build phase. The syntax this PR introduces is:
```java
MqttMessageBuilders.connAck().properties(new MqttMessageBuilders.PropertiesInitializer<MqttMessageBuilders.ConnAckPropertiesBuilder>() {
@Override
public void apply(MqttMessageBuilders.ConnAckPropertiesBuilder builder) {
builder.assignedClientId("client1234");
builder.userProperty("custom_property", "value");
}
}).build()
```
The name of the properties are defined in the `ConnAckPropertiesBuilder` so that is can be easily used by autocompletion tools.
Result:
This PR adds the builder class `ConnAckPropertiesBuilder`which is used by newly introduced method `properties` inside the message builder class `ConnAckBuilder`.
Motivation:
Android seems to use a different field name so we should also try to access it with the name used by android.
Modifications:
Try first fd and if this fails try descriptor as field name
Result:
Workaround for android.
Motivation:
switch is used when we have a good amount of cases because switch is faster than if-else. However, we're using only 1 case in switch which can affect performance.
Modification:
Changed switch to if.
Result:
Good code.
Motivation:
HPACK static table is organized in a way that fields with the same
name are sequential. Which means when doing sequential scan we can
short-circuit scan on name mismatch.
Modifications:
* `HpackStaticTable.getIndexIndensitive` returns -1 on name mismatch
rather than keep scanning.
* `HpackStaticTable` statically defined max position in the array
where name duplication is possible (after the given index there's
no need to check for other fields with the same name)
* Benchmark for different lookup patterns
Result:
Better HPACK static table lookup performance.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
netty-jni-util is now also hosted on maven central. Let's use it
Modifications:
Adjust plugins to just unpack netty-jni-util and use it
Result:
Be able to use what is in the maven cache for netty-jni-util
