Summary:
PR https://github.com/facebook/rocksdb/issues/9557 introduced a race condition between manual compaction
foreground thread and background compaction thread.
This PR adds the ability to really unschedule manual compaction from
thread-pool queue by differentiate tag name for manual compaction and
other tasks.
Also fix an issue that db `close()` didn't cancel the manual compaction thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9625
Test Plan: unittest not hang
Reviewed By: ajkr
Differential Revision: D34410811
Pulled By: jay-zhuang
fbshipit-source-id: cb14065eabb8cf1345fa042b5652d4f788c0c40c
Summary:
This bug affects use cases that meet the following conditions
- (has only the default column family or disables WAL) and
- has at least one event listener
- atomic flush is NOT affected.
If the above conditions meet, then RocksDB can release the db mutex before picking all the
existing memtables to flush. In the meantime, a snapshot can be created and db's sequence
number can still be incremented. The upcoming flush will ignore this snapshot.
A later read using this snapshot can return incorrect result.
To fix this issue, we call the listeners callbacks after picking the memtables so that we avoid
creating snapshots during this interval.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9648
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D34555456
Pulled By: riversand963
fbshipit-source-id: 1438981e9f069a5916686b1a0ad7627f734cf0ee
Summary:
The following sequence of events can cause silent data loss for write-committed
transactions.
```
Time thread 1 bg flush
| db->Put("a")
| txn = NewTxn()
| txn->Put("b", "v")
| txn->Prepare() // writes only to 5.log
| db->SwitchMemtable() // memtable 1 has "a"
| // close 5.log,
| // creates 8.log
| trigger flush
| pick memtable 1
| unlock db mutex
| write new sst
| txn->ctwb->Put("gtid", "1") // writes 8.log
| txn->Commit() // writes to 8.log
| // writes to memtable 2
| compute min_log_number_to_keep_2pc, this
| will be 8 (incorrect).
|
| Purge obsolete wals, including 5.log
|
V
```
At this point, writes of txn exists only in memtable. Close db without flush because db thinks the data in
memtable are backed by log. Then reopen, the writes are lost except key-value pair {"gtid"->"1"},
only the commit marker of txn is in 8.log
The reason lies in `PrecomputeMinLogNumberToKeep2PC()` which calls `FindMinPrepLogReferencedByMemTable()`.
In the above example, when bg flush thread tries to find obsolete wals, it uses the information
computed by `PrecomputeMinLogNumberToKeep2PC()`. The return value of `PrecomputeMinLogNumberToKeep2PC()`
depends on three components
- `PrecomputeMinLogNumberToKeepNon2PC()`. This represents the WAL that has unflushed data. As the name of this method suggests, it does not account for 2PC. Although the keys reside in the prepare section of a previous WAL, the column family references the current WAL when they are actually inserted into the memtable during txn commit.
- `prep_tracker->FindMinLogContainingOutstandingPrep()`. This represents the WAL with a prepare section but the txn hasn't committed.
- `FindMinPrepLogReferencedByMemTable()`. This represents the WAL on which some memtables (mutable and immutable) depend for their unflushed data.
The bug lies in `FindMinPrepLogReferencedByMemTable()`. Originally, this function skips checking the column families
that are being flushed, but the unit test added in this PR shows that they should not be. In this unit test, there is
only the default column family, and one of its memtables has unflushed data backed by a prepare section in 5.log.
We should return this information via `FindMinPrepLogReferencedByMemTable()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9571
Test Plan:
```
./transaction_test --gtest_filter=*/TransactionTest.SwitchMemtableDuringPrepareAndCommit_WC/*
make check
```
Reviewed By: siying
Differential Revision: D34235236
Pulled By: riversand963
fbshipit-source-id: 120eb21a666728a38dda77b96276c6af72b008b1
Summary:
Fix `DisableManualCompaction()` has to wait scheduled manual compaction to start the execution to cancel the job.
When a manual compaction in thread-pool queue is cancel, set the job is_canceled to true and clean the resource.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9557
Test Plan: added unittest that will hang without the change
Reviewed By: ajkr
Differential Revision: D34214910
Pulled By: jay-zhuang
fbshipit-source-id: 89dbaee78ddf26eb13ce862c2b15f4a098b36a78
Summary:
Even after https://github.com/facebook/rocksdb/issues/9461 could see
```
Error: please specify prefix_size for test_batches_snapshots test!
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9463
Test Plan:
run `make blackbox_crashtest` for a long time. (Unfortunately,
it's taking a long time to reproduce these failures)
Reviewed By: akankshamahajan15
Differential Revision: D33838152
Pulled By: pdillinger
fbshipit-source-id: b9a73c5bbb68df53f14c22b9b52f61d1f7ef38af
Summary:
Changes in https://github.com/facebook/rocksdb/issues/9453 could trigger
```
stderr:
Error: prefixpercent is non-zero while prefix_size is not positive!
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9461
Test Plan: run `make blackbox_crashtest` for a long time
Reviewed By: ajkr
Differential Revision: D33830751
Pulled By: pdillinger
fbshipit-source-id: be88377dcaa47e4bb7adb0347762639eff8f1476
Summary:
MemTable::MultiGet was not considering range tombstones before
querying Bloom filter. This means range tombstones would be skipped for
keys (or prefixes) with no other entries in the memtable. This could cause
old values for a key (in SST files) to still show up until the range tombstone
covering it has been flushed.
This is fixed by essentially disabling the memtable Bloom filter when there
are any range tombstones. (This could be better optimized in the future, but
good enough for now.)
Did some other cleanup/optimization in the same code to (more than) offset
the cost of checking on range tombstones in more cases. There is now
notable improvement when memtable_whole_key_filtering and prefix_extractor
are used together (unusual), and this makes MultiGet closer to the Get
implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9453
Test Plan:
new unit test added. Added memtable Bloom to crash test.
Performance testing
--------------------
Build WAL-only DB (recovers to memtable):
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=1000000 -write_buffer_size=250000000
```
Query test command, to maximize sensitivity to the changed code:
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=multireadrandom -num=10000000 -write_buffer_size=250000000 -memtable_bloom_size_ratio=0.015 -multiread_batched -batch_size=24 -threads=8 -memtable_whole_key_filtering=$MWKF -prefix_size=$PXS
```
(Note -num here is 10x larger for mostly memtable misses)
Before & after run simultaneously, average over 10 iterations per data point, ops/sec.
MWKF=0 PXS=0 (Bloom disabled)
Before: 5724844
After: 6722066
MWKF=0 PXS=7 (prefixes hardly unique; Bloom not useful)
Before: 9981319
After: 10237990
MWKF=0 PXS=8 (prefixes unique; Bloom useful)
Before: 12081715
After: 12117603
MWKF=1 PXS=0 (whole key Bloom useful)
Before: 11944354
After: 12096085
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes not useful in old version)
Before: 9444299
After: 11826029
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes useful in old version)
Before: 11784465
After: 11778591
Only in this last case is the 'before' *slightly* faster, perhaps because hashing prefixes is slightly faster than hashing whole keys. Otherwise, 'after' is faster.
Reviewed By: ajkr
Differential Revision: D33805025
Pulled By: pdillinger
fbshipit-source-id: 597523cae4f4eafdf6ae6bb2bc6cb46f83b017bf
Summary:
**Context:**
Compiling RocksDB with -Winconsistent-missing-destructor-override reveals the following :
```
./include/rocksdb/env.h:174:11: error: '~Env' overrides a destructor but is not marked 'override' [-Werror,-Winconsistent-missing-destructor-override]
virtual ~Env();
^
./include/rocksdb/customizable.h:58:3: note: overridden virtual function is here
~Customizable() override {}
```
The need of overriding the Env's destructor seems to be introduced by https://github.com/facebook/rocksdb/pull/9293 and surfaced by -Winconsistent-missing-destructor-override, which is not turned on by default.
**Summary:**
Mark ~Env() override
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9467
Test Plan: - Turn on -Winconsistent-missing-destructor-override and USE_CLANG=1 make -jN env/env.o to see whether the error shows up
Reviewed By: jay-zhuang, riversand963, george-reynya
Differential Revision: D33864985
Pulled By: hx235
fbshipit-source-id: 4a78bd161ff153902b2676829723e9a1c33dd749
(cherry picked from commit a3de7ae49f)
Summary:
From C++ 20 onwards, the != operator is not supported for a shared_ptr.
So switch to using ==.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9465
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D33850596
Pulled By: anand1976
fbshipit-source-id: eec16d1aa6c39a315ec2d44d233d7518f9c1ddcb
Summary:
It appears that VS2017 is covered in CircleCI so we don't need it in Appveyor. Also, currently Appveyor has some problem with installing VS2017.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9417
Test Plan: Watch Appveyor run.
Reviewed By: riversand963
Differential Revision: D33719364
fbshipit-source-id: 7f31bf056eeaf487b372881f85d134dc0fe5832a
Summary:
Loose ends relate to mmap on 32-bit systems. (Testing is more
complicated when the feature was completely disabled on 32-bit.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9386
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D33590715
Pulled By: pdillinger
fbshipit-source-id: f2637036a538a552200adee65b6765fce8cae27b
Summary:
Fixes a major performance regression in 6.26, where
extra CPU is spent in SliceTransform::AsString when reads involve
a prefix_extractor (Get, MultiGet, Seek). Common case performance
is now better than 6.25.
This change creates a "fast path" for verifying that the current prefix
extractor is unchanged and compatible with what was used to
generate a table file. This fast path detects the common case by
pointer comparison on the current prefix_extractor and a "known
good" prefix extractor (if applicable) that is saved at the time the
table reader is opened. The "known good" prefix extractor is saved
as another shared_ptr copy (in an existing field, however) to ensure
the pointer is not recycled.
When the prefix_extractor has changed to a different instance but
same compatible configuration (rare, odd), performance is still a
regression compared to 6.25, but this is likely acceptable because
of the oddity of such a case. The performance of incompatible
prefix_extractor is essentially unchanged.
Also fixed a minor case (ForwardIterator) where a prefix_extractor
could be used via a raw pointer after being freed as a shared_ptr,
if replaced via SetOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407
Test Plan:
## Performance
Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load)
v6.26: 4833 vs. 6698 (<- major regression!)
v6.27: 4737 vs. 6397 (still)
New: 6704 vs. 6461 (better than baseline in common case)
Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible)
Changed prefix size (no usable filter) in new: 787 vs. 5927
Changed prefix size (no usable filter) in new & baseline: 773 vs. 784
Reviewed By: mrambacher
Differential Revision: D33677812
Pulled By: pdillinger
fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
Summary:
* remove pyenv installation step which is not needed (it takes 3 minutes to install for every job and fail from time to time)
* download compression lib fail from time to time, Uploaded the libs to S3 and download from them for CI, which should be more stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9406
Test Plan: CI
Reviewed By: riversand963
Differential Revision: D33700158
Pulled By: jay-zhuang
fbshipit-source-id: be7b172d7cd059c9d7b3139fd7a34f8070460e31
Summary:
Wasn't able to easily reproduce error, but easy to see a race
condition between TestFlushListener::OnFlushCompleted and
DBTestBase::Close(), which frees CF handles before closing DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9400
Test Plan: CI etc.
Reviewed By: riversand963
Differential Revision: D33645134
Pulled By: pdillinger
fbshipit-source-id: d0ec914cc43c9e14f53da633876b95b61995138d
Summary:
xcode 11.3.1 is deprecated https://circleci.com/docs/2.0/testing-ios/ , jobs are failing:
```
failed to create host: Image xcode:11.3.0 is not supported
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9405
Test Plan: CI
Reviewed By: ajkr, hx235
Differential Revision: D33674462
Pulled By: jay-zhuang
fbshipit-source-id: 85dd27aad84d26eaaa5c5375015344182b2c50b9
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9404
It is better practice to mark destructors as override. Without this
change there can be issues building with
-Wsuggest-destructor-override.
Reviewed By: riversand963
Differential Revision: D33671992
fbshipit-source-id: 75b0c15010cbab5fbc071c150fef1dc85d5d9d96
Summary:
The old block-based filter has been deprecated for years, but
this makes that more clear by marking the functions specific to it and
logging a warning when the feature is used.
It is deprecated because of performance. In that old design, you have to
binary search through the full SST index before a bloom filter query, which
is much more expensive than a bloom query itself.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9403
Test Plan:
Used db_bench with and without -use_block_based_filter,
running at the same time
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom,readrandom -num=10000000 -duration=20 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0
No significant difference in construction time but 3x slower readrandom
with -use_block_based_filter:
readrandom : 100.517 micros/op 9948 ops/sec; 1.1 MB/s
vs.
readrandom : 33.368 micros/op 29968 ops/sec; 3.3 MB/s
Also saw deprecation message (just once) in LOG only with
-use_block_based_filter
Reviewed By: ajkr
Differential Revision: D33673202
Pulled By: pdillinger
fbshipit-source-id: 99f6f0eff619408d9e5f7ef546954ed0be6c7a5b
Summary:
**Context/Summary:**
There are two `RateLimiter::Request()` in public header. One of them is missing some comment that the other one has.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9392
Test Plan: rely on CI test
Reviewed By: pdillinger
Differential Revision: D33623609
Pulled By: hx235
fbshipit-source-id: 42dc06308ff0bcf5ee7ef67e0b1c0172fc239b20
Summary:
Closing https://github.com/facebook/rocksdb/issues/5954
fsync/fdatasync on Linux:
```
(fsync/fdatasync) includes writing through or flushing a disk cache if present.
```
However, on OS X and iOS:
```
(fsync) will flush all data from the host to the drive (i.e. the "permanent storage device"),
the drive itself may not physically write the data to the platters for quite some time and it
may be written in an out-of-order sequence.
```
Solution is to use `fcntl(F_FULLFSYNC)` on OS X so that we get the same
persistence guarantee.
According to OSX man page,
```
The F_FULLFSYNC fcntl asks the drive to flush **all** buffered data to permanent storage.
```
This suggests that it will be no faster than `fsync` on Linux, since Linux, according to its man page,
```
writing through or flushing a disk cache if present
```
It means Linux may not flush **all** data from disk cache.
This is similar to bug reports/fixes in:
- golang: https://github.com/golang/go/issues/26650
- leveldb: 296de8d5b8.
Not sure if we should fallback to fsync since we break persistence contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9356
Reviewed By: jay-zhuang
Differential Revision: D33417416
Pulled By: riversand963
fbshipit-source-id: 475548ff9c5eaccde325e0f6842694271cbc8cb7
Summary:
In response to https://github.com/facebook/rocksdb/issues/9354, this PR adds a way for users to "opt out"
of extra checks that can impact peak write performance, which
currently only includes force_consistency_checks. I considered including
some other options but did not see a db_bench performance difference.
Also clarify in comment for force_consistency_checks that it can "slow
down saturated writing."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9363
Test Plan:
basic coverage in unit tests
Using my perf test in https://github.com/facebook/rocksdb/issues/9354 comment, I see
force_consistency_checks=true -> 725360 ops/s
force_consistency_checks=false -> 783072 ops/s
Reviewed By: mrambacher
Differential Revision: D33636559
Pulled By: pdillinger
fbshipit-source-id: 25bfd006f4844675e7669b342817dd4c6a641e84
Summary:
We are phasing out the slack channel, but keeping the Google
Group email list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9387
Test Plan: no code
Reviewed By: riversand963
Differential Revision: D33591265
Pulled By: pdillinger
fbshipit-source-id: 48e45a74753d05611db2c8f4efc4de16a1f50e70
Summary:
Replace `-o /dev/null` by `-o test.o` when testing for C++ features such as
-faligned-new otherwise tests will fail with some bugged binutils
(https://sourceware.org/bugzilla/show_bug.cgi?id=19526):
```
output/host/bin/xtensa-buildroot-linux-uclibc-g++ -faligned-new -x c++ - -o /dev/null <<EOF
struct alignas(1024) t {int a;};
int main() {}
EOF
/home/fabrice/buildroot/output/host/lib/gcc/xtensa-buildroot-linux-uclibc/8.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: final link failed: file truncated
```
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6479
Reviewed By: ajkr
Differential Revision: D33574136
Pulled By: riversand963
fbshipit-source-id: 12b48658b17e36013042c98219b89ddf71161d3c
Summary:
Range Locking supports Lock Escalation. Lock Escalation is invoked when
lock memory is nearly exhausted and it reduced the amount of memory used
by joining adjacent locks.
Bridging the gap between certain locks has adverse effects. For example,
in MyRocks it is not a good idea to bridge the gap between locks in
different indexes, as that get the lock to cover large portions of
indexes, or even entire indexes.
Resolve this by introducing Escalation Barrier. The escalation process
will call the user-provided barrier callback function:
bool(const Endpoint& a, const Endpoint& b)
If the function returns true, there's a barrier between a and b and Lock
Escalation will not try to bridge the gap between a and b.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9290
Reviewed By: akankshamahajan15
Differential Revision: D33486753
Pulled By: riversand963
fbshipit-source-id: f97910b67aba0579ea1d35f523ca6863d3dd018e
Summary:
Fixesfacebook/rocksdb#7720
Updated Makefile with flags to define target architecture when compiling/linking,
and added goal `rocksdbjavastaticosxub` to build a OS X Universal Binary native library.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9254
Reviewed By: mrambacher
Differential Revision: D33551160
Pulled By: pdillinger
fbshipit-source-id: 9ce9962e03aacf55014545a6cdf638b5b14b8fa9
Summary:
As title.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9383
Test Plan:
manually add `using namespace` to a file, and run `make check-sources`.
Then, remove `using namespace`, and run `make check-sources`
Reviewed By: ajkr
Differential Revision: D33551706
Pulled By: riversand963
fbshipit-source-id: 1bb8304f38434da7de0656882e62e77673155725
Summary:
Fix https://github.com/facebook/rocksdb/issues/8046 : FlushMemTable return ok but memtable does not synchronize flush. The way to fix it is to expose RecoveryError.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8173
Reviewed By: ajkr
Differential Revision: D31674552
Pulled By: jay-zhuang
fbshipit-source-id: 9d16b69ba12a196bb429332ec8224754de97773d
Summary:
As title.
This is part of an fb-internal task.
First, remove all `using namespace` statements if applicable.
Next, utilize multiple build platforms and see if anything is broken.
Should anything become broken, fix the compilation errors with as little extra change as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9369
Test Plan:
internal build and make check
make clean && make static_lib && cd examples && make all
Reviewed By: pdillinger
Differential Revision: D33517260
Pulled By: riversand963
fbshipit-source-id: 3fc4ce6402a073421dfd9a9b2d1c79441dca7a40
Summary:
With memkind installed, either on a non-fb machine or using `ROCKSDB_NO_FBCODE=1`.
```
ROCKSDB_NO_FBCODE=1 make static_lib
```
Compilation failed due to unused variable warning treated as error. To bypass this, we need to
disable warning-as-error, which is not ideal.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9377
Test Plan: Repeat the above command, and rely on CI.
Reviewed By: ajkr
Differential Revision: D33543343
Pulled By: riversand963
fbshipit-source-id: 9a2790b38c00b8696c7910287f4ae5a9b394341d
Summary:
Compatible change, more natural (especially in generated Rust bindings), no risk that the API will ever need mutable access because it has to make a copy anyway.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9376
Reviewed By: ajkr
Differential Revision: D33541435
Pulled By: pdillinger
fbshipit-source-id: 15c512a0d70b6e8694fa99d598b7d022751c1e59
Summary:
In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release.
Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362
Reviewed By: pdillinger
Differential Revision: D33432562
Pulled By: mrambacher
fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9370
GCC and newer clang, e.g. clang-12 treat `std::unique_ptr` slightly differently.
For the following code
```
#include <iostream>
#include <memory>
#include <type_traits>
struct A {
std::unique_ptr<int> m1;
};
int main()
{
std::cout << std::boolalpha;
std::cout << std::is_standard_layout<A>::value << '\n';
return 0;
}
```
GCC11(C++20) (tested on https://en.cppreference.com/w/cpp/types/is_standard_layout) will print "true", while newer clang, e.g. clang-12 will print "false". This breaks the usage of `offsetof()` on structs with non-static members of type `std::unique_ptr`.
Fixing this by replacing the builtin `offsetof` with a trick documented at https://gist.github.com/graphitemaster/494f21190bb2c63c5516.
Reviewed By: jay-zhuang
Differential Revision: D33420840
fbshipit-source-id: 02bde281dfa28809bec787ad0f7019e85dd9c607
Summary:
This change adds the filename of the offending filen to several place that produce Status objects with code `kCorruption`.
This is not an attempt to have every Corruption message in the codebase extended with the filename, but it is a start.
The motivation for the change was to quickly diagnose which file is corrupted when a large database is openend and there is not option to copy it offsite for analysis, run strace or install the ldb tool.
In the particular case in question, the error message improved from a mere
```
Corruption: checksum mismatch
```
to
```
Corruption: checksum mismatch in file /path/to/db/engine-rocksdb/MANIFEST-000171
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9239
Reviewed By: jay-zhuang
Differential Revision: D33237742
Pulled By: riversand963
fbshipit-source-id: bd42559cfbf786a0a674d091671d1a2bf07bdd31
Summary:
Function `Version::UpdateFilesByCompactionPri()` is never called and not implemented.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8724
Reviewed By: ajkr
Differential Revision: D30643943
Pulled By: riversand963
fbshipit-source-id: 174b2d9a2a42e286222909a035cc74a7b5602335
Summary:
Note: rebase on and merge after https://github.com/facebook/rocksdb/pull/9349, as part of https://github.com/facebook/rocksdb/pull/9342
**Context:**
https://github.com/facebook/rocksdb/pull/9073 charged the hash entries' memory in block cache with `CacheReservationHandle`. However, in the edge case where Ribbon Filter falls back to Bloom Filter and swaps its hash entries to the embedded bloom filter object, the handles associated with those entries are not swapped and thus not released as soon as those entries are cleared during Bloom Filter's finish process.
Although this is a minor issue since RocksDB internal calls `FilterBitsBuilder->Reset()` right after `FilterBitsBuilder->Finish()` on the main path, which releases all the cache reservation related to both the Ribbon Filter and its embedded Bloom Filter, it still worths this fix to avoid confusion.
**Summary:**
- Swapped the `CacheReservationHandle` associated with the hash entries on Ribbon Filter's fallback
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9345
Test Plan: - Added a unit test to verify the number of cache reservation after clearing hash entries, which failed before the change and now succeeds
Reviewed By: pdillinger
Differential Revision: D33377225
Pulled By: hx235
fbshipit-source-id: 7487f4c40dfb6ee7928232021f93ef2c5329cffa
Summary:
Closing https://github.com/facebook/rocksdb/issues/5006
Calling `DB::DestroyColumnFamilyHandle(column_family)` with `column_family` being the return value of
`DB::DefaultColumnFamily()` will return `Status::InvalidArgument()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9347
Test Plan: make check
Reviewed By: akankshamahajan15
Differential Revision: D33369675
Pulled By: riversand963
fbshipit-source-id: a8266a4daddf2b7a773c2dc7f3eb9a4adfb6b6dd
Summary:
Recently we added the ability to verify some prefix of operations are recovered (AKA no "hole" in the recovered data) (https://github.com/facebook/rocksdb/issues/8966). Besides testing unsynced data loss scenarios, it is also useful to test WAL disabled use cases, where unflushed writes are expected to be lost. Note RocksDB only offers the prefix-recovery guarantee to WAL-disabled use cases that use atomic flush, so crash test always enables atomic flush when WAL is disabled.
To verify WAL-disabled crash-recovery correctness globally, i.e., also in whitebox and blackbox transaction tests, it is possible but requires further changes. I added TODOs in db_crashtest.py.
Depends on https://github.com/facebook/rocksdb/issues/9305.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9338
Test Plan: Running all crash tests and many instances of blackbox. Sandcastle links are in Phabricator diff test plan.
Reviewed By: riversand963
Differential Revision: D33345333
Pulled By: ajkr
fbshipit-source-id: f56dd7d2e5a78d59301bf4fc3fedb980eb31e0ce
Summary:
The LastSequence field in the MANIFEST file is the baseline seqno for a recovered DB. Recovering WAL entries might cause the recovered DB's seqno to advance above this baseline, but the recovered DB will never use a smaller seqno.
Before this PR, we were writing the DB's seqno at the time of LogAndApply() as the LastSequence value. This works in the sense that it is a large enough baseline for the recovered DB that it'll never overwrite any records in existing SST files. At the same time, it's arbitrarily larger than what's needed. This behavior comes from LevelDB, where there was no tracking of largest seqno in an SST file.
Now we know the largest seqno of newly written SST files, so we can write an exact value in LastSequence that actually reflects the largest seqno in any file referred to by the MANIFEST. This is primarily useful for correctness testing with unsynced data loss, where the recovered DB's seqno needs to indicate what records were recovered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9305
Test Plan:
- https://github.com/facebook/rocksdb/issues/9338 adds crash-recovery correctness testing coverage for WAL disabled use cases
- https://github.com/facebook/rocksdb/issues/9357 will extend that testing to cover file ingestion
- Added assertion at end of LogAndApply() for `VersionSet::descriptor_last_sequence_` consistency with files
- Manually tested upgrade/downgrade compatibility with a custom crash test that randomly picks between a `db_stress` built with and without this PR (for old code it must run with `-disable_wal=0`)
Reviewed By: riversand963
Differential Revision: D33182770
Pulled By: ajkr
fbshipit-source-id: 0bfafaf685f347cc8cb0e1d62e0186340a738f7d
Summary:
Allows the Env to have options (Configurable) and loads like other Customizable classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9293
Reviewed By: pdillinger, zhichao-cao
Differential Revision: D33181591
Pulled By: mrambacher
fbshipit-source-id: 55e823886c654d214eda9eedd45ccdc54dac14d7
Summary:
Fixes https://github.com/facebook/rocksdb/issues/9339
When writing SST file, the name, computed as `prefix_extractor->GetId()` will be written to the properties block.
When the SST is opened again in the future, `CreateFromString()` will take the name as argument and try
to create a prefix extractor object. Without this fix, the C API will pass a `Wrapper` pointer to the underlying
DB's `prefix_extractor`. `Wrapper::GetId()`, in this case, will be missing the prefix length component, causing a
prefix extractor of length 0 to be silently created and used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9343
Test Plan:
```
make c_test
./c_test
```
Reviewed By: mrambacher
Differential Revision: D33355549
Pulled By: riversand963
fbshipit-source-id: c92c3acd8be262c3bff8794b4229e42b9ee31203
Summary:
Several improvements to SimulatedHybridFileSystem:
(1) Allow a mode where all I/Os to all files simulate HDD. This can be enabled in db_bench using -simulate_hdd
(2) Latency calculation is slightly more accurate
(3) Allow to simulate more than one HDD spindles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9301
Test Plan: Run db_bench and observe the results are reasonable.
Reviewed By: jay-zhuang
Differential Revision: D33141662
fbshipit-source-id: b736e58c4ba910d06899cc9ccec79b628275f4fa
