Summary:
Right now, deleting blob files is not rate limited, even if SstFileManger is specified.
On the other hand, rate limiting blob deletion is not supported. With this change, Blob file
deletion will go through SstFileManager too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4904
Differential Revision: D13772545
Pulled By: siying
fbshipit-source-id: bd1b1d0beb26d5167385e00b7ecb8b94b879de84
Summary:
Remove unused blob WAL filter so that users are not confused.
I was initially under the impression that we have WAL Filter support in BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4896
Differential Revision: D13725709
Pulled By: sagar0
fbshipit-source-id: f997d7546e138a474036e88b957907cc714327f1
Summary:
Based on the specific workload models (key access distribution, value size distribution, and iterator scan length distribution, the QPS variation), the MixGraph benchmark generate the synthetic workload according to these distributions which can reflect the real-world workload characteristics.
After user enable the tracing function, they will get the trace file. By analyzing the trace file with the trace_analyzer tool, user can generate a set of statistic data files including. The *_accessed_key_stats.txt, *-accessed_value_size_distribution.txt, *-iterator_length_distribution.txt, and *-qps_stats.txt are mainly used to fit the Matlab model fitting. After that, user can get the parameters of the workload distributions (the modeling details are described: [here](https://github.com/facebook/rocksdb/wiki/RocksDB-Trace%2C-Replay%2C-and-Analyzer))
The key access distribution follows the The two-term power model. The probability density function is: `f(x) = ax^{b}+c`. The corresponding parameters are key_dist_a, key_dist_b, and key_dist_c in db_bench
For the value size distribution and iterator scan length distribution, they both follow the Generalized Pareto Distribution. The probability density function is `f(x) = (1/sigma)(1+k*(x-theta)/sigma))^{-1-1/k)`. The parameters are: value_k, value_theta, value_sigma and iter_k, iter_theta, iter_sigma. For more information about the Generalized Pareto Distribution, users can find the [wiki](https://en.wikipedia.org/wiki/Generalized_Pareto_distribution) and [Matalb page](https://www.mathworks.com/help/stats/generalized-pareto-distribution.html)
As for the QPS, it follows the diurnal pattern. So Sine is a good model to fit it. `F(x) = sine_a*sin(sine_b*x + sine_c) + sine_d`. The trace_will tell you the average QPS in the print out resutls, which is sine_d. After user fit the "*-qps_stats.txt" to the Matlab model, user can get the sine_a, sine_b, and sine_c. By using the 4 parameters, user can control the QPS variation including the period, average, changes.
To use the bench mark, user can indicate the following parameters as examples:
```
-benchmarks="mixgraph" -key_dist_a=0.002312 -key_dist_b=0.3467 -value_k=0.9233 -value_sigma=226.4092 -iter_k=2.517 -iter_sigma=14.236 -mix_get_ratio=0.7 -mix_put_ratio=0.25 -mix_seek_ratio=0.05 -sine_mix_rate_interval_milliseconds=500 -sine_a=15000 -sine_b=1 -sine_d=20000
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4788
Differential Revision: D13573940
Pulled By: sagar0
fbshipit-source-id: e184c27e07b4f1bc0b436c2be36c5090c1fb0222
Summary:
This is essentially a re-submission of #4251 with a few improvements:
- Split `CompressionDict` into two separate classes: `CompressionDict` and `UncompressionDict`
- Eliminated `Init` functions. Instead do all initialization work in constructors.
- Added test case for parallel DB open, which is the scenario where #4251 failed under TSAN.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4849
Differential Revision: D13606039
Pulled By: ajkr
fbshipit-source-id: 08c236059798c710db9cbf545fce0f371232d447
Summary:
Fix how CompactionIterator::findEarliestVisibleSnapshots handles released snapshot. It fixing the two scenarios:
Scenario 1:
key1 has two values v1 and v2. There're two snapshots s1 and s2 taken after v1 and v2 are committed. Right after compaction output v2, s1 is released. Now findEarliestVisibleSnapshot may see s1 being released, and return the next snapshot, which is s2. That's larger than v2's earliest visible snapshot, which was s1.
The fix: the only place we check against last snapshot and current key snapshot is when we decide whether to compact out a value if it is hidden by a later value. In the check if we see current snapshot is even larger than last snapshot, we know last snapshot is released, and we are safe to compact out current key.
Scenario 2:
key1 has two values v1 and v2. there are two snapshots s1 and s2 taken after v1 and v2 are committed. During compaction before we process the key, s1 is released. When compaction process v2, snapshot checker may return kSnapshotReleased, and the earliest visible snapshot for v2 become s2. When compaction process v1, snapshot checker may return kIsInSnapshot (for WritePrepared transaction, it could be because v1 is still in commit cache). The result will become inconsistent here.
The fix: remember the set of released snapshots ever reported by snapshot checker, and ignore them when finding result for findEarliestVisibleSnapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4890
Differential Revision: D13705538
Pulled By: maysamyabandeh
fbshipit-source-id: e577f0d9ee1ff5a6035f26859e56902ecc85a5a4
Summary:
Here is the order of ops in a commit: 1) update commit cache 2) publish seq, 3) RemovePrepared. In case of a delayed prepared, there will be a gap between when the commit is visible to snapshots until delayed_prepared_ is cleaned up. To tell apart this case from a delayed uncommitted txn from, the commit entry of a delayed prepared is also stored in delayed_prepared_commits_, which is updated before publishing the commit.
Also logic in GetSnapshotInternal that ensures that each new snapshot is always larger than max_evicted_seq_ is updated to check against the upcoming value of max_evicted_seq_ rather than its current one. This is because AdvanceMaxEvictedSeq gets the list of snapshots lower than the new max, before updating max_evicted_seq_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4894
Differential Revision: D13726988
Pulled By: maysamyabandeh
fbshipit-source-id: 1e70d78061b50c944c9816bf4b6dac405ab4ccd3
Summary:
Remove `garbage_collection_deletion_size_threshold` as it is not used anywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4888
Differential Revision: D13685982
Pulled By: sagar0
fbshipit-source-id: e08d3017b9a0c8fa99bc332b595ee4ed9db70c87
Summary:
Compaction iterator keep a copy of list of live snapshots at the beginning of compaction, and then query snapshot checker to verify if values of a sequence number is visible to these snapshots. However when the snapshot is released in the middle of compaction, the snapshot checker implementation (i.e. WritePreparedSnapshotChecker) may remove info with the snapshot and may report incorrect result, which lead to values being compacted out when it shouldn't. This patch conservatively keep the values if snapshot checker determines that the snapshots is released.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4858
Differential Revision: D13617146
Pulled By: maysamyabandeh
fbshipit-source-id: cf18a94f6f61a94bcff73c280f117b224af5fbc3
Summary:
By convention, time_t almost always stores the integral number of seconds since
00:00 hours, Jan 1, 1970 UTC, according to http://www.cplusplus.com/reference/ctime/time_t/.
We surely want more precision than seconds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4868
Differential Revision: D13633046
Pulled By: riversand963
fbshipit-source-id: 4e01e23a22e8838023c51a91247a286dbf3a5396
Summary:
With WritePrepared transaction, flush/compaction can contain uncommitted keys, and those keys can get committed during compaction. If a snapshot is taken before the key is committed, it should not see the key. On the other hand, compaction grab the list of snapshots at its beginning, and only consider those snapshots to dedup keys. Consider the case:
```
seq = 1: put "foo" = "bar"
seq = 2: transaction T: delete "foo", prepare
seq = 3: compaction start
seq = 4: take snapshot S
seq = 5: transaction T: commit.
...
seq = N: compaction iterator reached key "foo".
```
When compaction start, the list of snapshot is empty. Compaction doesn't take snapshot S into account. When it reached "foo", transaction T is committed. Compaction may think the value "foo=bar" is not visible by any snapshot (which is wrong), and compact the value out.
The fix is to explicitly take a snapshot before compaction grabbing the list of snapshots. Compaction will then has to keep keys visible to this snapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4883
Differential Revision: D13668775
Pulled By: maysamyabandeh
fbshipit-source-id: 1cab9615f94b7d3e8522cc3d44c3a14c7d4720e4
Summary:
The AdvanceMaxEvictedSeq algorithm assumes that new snapshots always have sequence number larger than the last max_evicted_seq_. To enforce this assumption we make two changes:
i) max is not advanced beyond the last published seq, with the exception that the evicted commit entry itself is not published yet, which is quite rare.
ii) When obtaining the snapshot if the max_evicted_seq_ is not published yet, commit a dummy entry so that it waits for it to be published and also increased the latest published seq by one above the max.
To test these non-realistic corner cases we create a commit cache with size 1 so that every single commit results into eviction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4886
Differential Revision: D13685270
Pulled By: maysamyabandeh
fbshipit-source-id: 5461bc09c2a9b75798bfcb9853a256c81cdac0b0
Summary:
Right now the error mesage when options.wal_dir doesn't exist is not helpful to users. Be more specific
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4874
Differential Revision: D13642425
Pulled By: siying
fbshipit-source-id: 9a3172ed0f799af233b0f3b2e5e35bc7ce04c7b5
Summary:
- Corrected a comment asserting that the values "smaller" than a min_blob_size will be inlined in the base db.
- Also fixed the type of ttl_range_secs while dumping blobdb options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4887
Differential Revision: D13680163
Pulled By: sagar0
fbshipit-source-id: 306c8cf2daa52210ffc334a6924ef44ffdedf887
Summary:
When prepared_txns_ heap is empty, SmallestUnCommittedSeq() should check delayed_prepared_ set as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4867
Differential Revision: D13632134
Pulled By: maysamyabandeh
fbshipit-source-id: b0423bb0a58dc95f1e636d5ed3f6e619df801fb7
Summary:
If we do not do this, then reading MutableCFOptions may have a race condition
with SetOptions which modifies MutableCFOptions.
Also reserve space in advance for vectors to avoid reallocation changing the
address of its elements.
Test plan
```
$make clean && make -j32 all check
$make clean && COMPILE_WITH_TSAN=1 make -j32 all check
$make clean && COMPILE_WITH_ASAN=1 make -j32 all check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4876
Differential Revision: D13644500
Pulled By: riversand963
fbshipit-source-id: 4b8112c5c819d5a2922bb61ad1521b3d2fb2fd47
Summary:
LDB is frequently used to exam data copied. wal_dir in option file is not modified and it usually points to the path it copied from.
The user experience will be better if when ldb sees wal_dir pointed by the option file doesn't exist, rather than fail, just ignore it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4875
Differential Revision: D13643173
Pulled By: siying
fbshipit-source-id: 2e64d4ea2ec49a6794b9a706b7fc1ba901128bb8
Summary:
Fixes a typo that made mutex_ to remain unlocked when GetSnapshotListFromDB called from WritePreparedTxnDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4872
Differential Revision: D13640381
Pulled By: maysamyabandeh
fbshipit-source-id: 50f6600568f9092b4b43115f6ebd96e6c7388ad7
Summary:
currently clang analyze fails with the following warning:
> utilities/transactions/write_prepared_transaction_test.cc:1451:5: warning: Forming reference to null pointer
ASSERT_GT(wp_db->max_evicted_seq_, 0); // max after recovery
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4871
Differential Revision: D13638053
Pulled By: miasantreble
fbshipit-source-id: b192b0c13c411c58defc9e280b34cdfcab3fa8e3
Summary:
Remove some components that we never heard people using them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4101
Differential Revision: D8825431
Pulled By: siying
fbshipit-source-id: 97a12ad3cad4ab12c82741a5ba49669aaa854180
Summary:
The vector returned by SnapshotList::GetAll could have duplicate entries if two separate snapshots have the same sequence number. However, when this vector is used in compaction the duplicate entires are of no use and could be safely ignored. Moreover not having duplicate entires simplifies reasoning in the compaction_iterator.cc code. For example when searching for the previous_snap we currently use the snapshot before the current one but the way the code uses that it expects it to be also less than the current snapshot, which would be simpler to read if there is no duplicate entry in the snapshot list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4860
Differential Revision: D13615502
Pulled By: maysamyabandeh
fbshipit-source-id: d45bf01213ead5f39db811f951802da6fcc3332b
Summary:
as titled.
Currently it's possible to create a local object of type PerfContext since it's
part of public API. Then it's safe to initialize the two members to 0.
If PerfContext is created as thread-local object, then all members are
zero-initialized according to C++ standard.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4859
Differential Revision: D13614504
Pulled By: riversand963
fbshipit-source-id: 406ff548e105a074f379ad1054d56fece5f524a0
Summary:
Previously IsInSnapshot assumed that the snapshot is valid at the time that the function is called. However there are cases where that might not be valid. Example is background compactions where the compaction algorithm operates with a list of snapshots some of which might be released by the time they are being passed to IsInSnapshot. The patch make two changes to enable the caller to tell difference: i) any live snapshot below max is added to max_committed_seq_, which allows IsInSnapshot to confidently tell whether the passed snapshot is invalid if it below max, ii) extends IsInSnapshot API with a "released" variable that is set true when IsInSnapshot find no such snapshot below max and also find no other way to give a certain return value. In such cases the return value is true but the caller should also check the "released" boolean after the call.
In short here is the changes in the API:
i) If the snapshot is valid, no change is required.
ii) If the snapshot might be invalid, a reference to "released" boolean must be passed to IsInSnapshot.
ii-a) If snapshot is above max, IsInSnapshot can figure the return valid using the commit cache.
ii-b) otherwise if snapshot is in old_commit_map_, IsInSnapshot can use that to tell if value was visible to the snapshot.
ii-c) otherwise it sets "released" to true and returns true as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4856
Differential Revision: D13599847
Pulled By: maysamyabandeh
fbshipit-source-id: 1752be28667f886a1efec8cae5714b9b7a8f1e0f
Summary:
https://github.com/facebook/rocksdb/pull/3340 introduces preloading when max_open_files != -1.
It doesn't preload index and filter in non-initial file loading case. This is a little bit too
complicated to understand. We observed in one MyRocks use case where the filter is expected to be
preloaded but is not. To simplify the use case, we simply always prefetch the index and filter.
They anyway is expected to be loaded in the file verification phase anyway.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4852
Differential Revision: D13595402
Pulled By: siying
fbshipit-source-id: d4d8624eb3e849e20aeb990df2100502d85aff31
Summary:
IsInSnapshotEmptyMapTest tests that IsInSnapshot returns correct value for existing data after a recovery, where max is not zero and yet commit cache is empty. The existing test was preliminary which is improved in this patch. It also increases the db sequence after recovery so that there the snapshot immediately taken after recovery would have a sequence number different than that of max_evicted_seq. This simplifies the logic in IsInSnapshot by not having to consider the special case that an old snapshot might be equal to max_evicted_seq and yet not present in old_commit_map.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4853
Differential Revision: D13595223
Pulled By: maysamyabandeh
fbshipit-source-id: 77c12ca8a3f61a47479a93bef2038ff502dc3322
Summary:
as titled.
We can remove the assersion because we do not perform verification in
AtomicFlushStressTest::TestCheckpoint for similar reasons to TestGet, TestPut,
etc.
Therefore, we override TestCheckpoint in AtomicFlushStressTest so that the
assertion `rand_column_families.size() == rand_keys.size()' is removed, and we
do not verify the DB in this function.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4846
Differential Revision: D13583377
Pulled By: riversand963
fbshipit-source-id: 03647f3da67e27a397413fd666e3bb43003bf596
Summary:
The rollback algorithm in WritePrepared transactions requires reading the values before the transaction start. Currently it uses the prepare_seq -1 as the snapshot sequence number for the read. This is not correct since the passed sequence number must be for a valid snapshot. The patch fixes it by passing kMaxSequenceNumber instead. This is fine since all the writes done by the aborted transaction will be skipped during the read anyway.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4851
Differential Revision: D13592773
Pulled By: maysamyabandeh
fbshipit-source-id: ff1bf92ea9909d4cccb173bdff49febc0e9eb7a2
Summary:
In compaction iterator, if the next value of single delete is a blob value, it should not treated as mismatch. This is only a minor fix and doesn't affect correctness.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4848
Differential Revision: D13585812
Pulled By: yiwu-arbug
fbshipit-source-id: 0ff6223fa03a644ac9fd8a2d77f9d6711d0a62b0
Summary:
Previously for point lookup we decided which file to look into based on user key overlap only. We also did not truncate range tombstones in the point lookup code path. These two ideas did not interact well in cases like this:
- L1 has range tombstone [a, c)#1 and point key b#2. The data is split between file1 with range [a#1,1, b#72057594037927935,15], and file2 with range [b#2, c#1].
- L1's file2 gets compacted to L2.
- User issues `Get()` for b#3.
- L1's file1 is opened and the range tombstone [a, c)#1 is found for b, while no point-key for b is found in L1.
- `Get()` assumes that the range tombstone must cover all data in that range in lower levels, so short circuits and returns `NotFound`.
The solution to this problem is to not look into files that only overlap with the point lookup at a range tombstone sentinel endpoint. In the above example, this would mean not opening L1's file1 or its tombstones during the `Get()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4829
Differential Revision: D13561355
Pulled By: ajkr
fbshipit-source-id: a13c21c816870a2f5d32a48af6dbd719a7d9d19f
Summary:
as titled.
Since different bg flush threads can flush different sets of column families
(due to column family creation and drop), we decide not to let one thread
perform atomic flush result installation for other threads. Bg flush threads
will install their atomic flush results sequentially to MANIFEST, using
a conditional variable, i.e. atomic_flush_install_cv_ to coordinate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4791
Differential Revision: D13498930
Pulled By: riversand963
fbshipit-source-id: dd7482fc41f4bd22dad1e1ef7d4764ef424688d7
Summary:
Declare Jemalloc non-standard APIs as weak symbols, so that if Jemalloc is linked with the binary, these symbols will be replaced by Jemalloc's, otherwise they will be nullptr. This is similar to how folly detect jemalloc, but we assume the main program use jemalloc as long as jemalloc is linked: https://github.com/facebook/folly/blob/master/folly/memory/Malloc.h#L147
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4844
Differential Revision: D13574934
Pulled By: yiwu-arbug
fbshipit-source-id: 7ea871beb1be7d5a1259cc38f9b78078793db2db
Summary:
The original implementation has two problems:
1. f0dda35d7d/db/db_impl_write.cc (L478)f0dda35d7d/db/write_thread.h (L231)
If the callback status of leader of the write_group fails, then the whole write_group will not write to WAL, this may cause data loss.
2. f0dda35d7d/db/write_thread.h (L130)
The annotation says that Writer.status is the status of memtable inserter, but the original implementation use it for another case which is not consistent with the original design. Looks like we can still reuse Writer.status, but we should modify the annotation, so Writer.status is not only the status of memtable inserter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4838
Differential Revision: D13574070
Pulled By: yiwu-arbug
fbshipit-source-id: a2a2aefcfd329c4c6a91652bf090aaf1ce119c4b
Summary:
The current implementation hardcode the default options in different
places, which makes it impossible to support other environments (like
encrypted environment).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4839
Differential Revision: D13573578
Pulled By: sagar0
fbshipit-source-id: 76b58b4b758902798d10ff2f52d9f39abff015e7
Summary:
DBSSTTest.RateLimitedDelete is flakey. The root cause is not completely identified, but
the compaction waiting in the test doesn't strictly wait for compaction cleaning to finish, which
may cause test flakiness. Fix it first and see whether the failures still happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4840
Differential Revision: D13567273
Pulled By: siying
fbshipit-source-id: 6fce38b912aff92a925231e7aa9bb0fef892761a
Summary:
Updated stress test will support testing of db in read-only mode.
The user has to make sure that only read/scan operations are enabled.
This PR relies on #4681.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4690
Differential Revision: D13102741
Pulled By: riversand963
fbshipit-source-id: f5a36b34db187fe12dd355f7eda161f99d6c75e4
Summary:
- To be consistent with the accounting of other optypes in `TableProperties`, we should count range tombstones in `TableProperties::num_entries` and `TableProperties::num_deletions`.
- Updated assertions in stress test's `OnTableFileCreated` handler to accept files with range tombstones only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4841
Differential Revision: D13568424
Pulled By: ajkr
fbshipit-source-id: 0139d7806494eda20ece67ec460d2458dbbf6026
Summary:
Avoid locking the DB mutex in order to reference SuperVersions. Instead, we get the thread local cached SuperVersion for each column family in the list. It depends on finding a sequence number that overlaps with all the open memtables. We start with the latest published sequence number, and if any of the memtables is sealed before we can get all the SuperVersions, the process is repeated. After a few times, give up and lock the DB mutex.
Tests:
1. Unit tests
2. make check
3. db_bench -
TEST_TMPDIR=/dev/shm ./db_bench -use_existing_db=true -benchmarks=readrandom -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=5000000 -reads=1000000 -threads=32 -compression_type=none -cache_size=1048576000 -batch_size=1 -bloom_bits=1
readrandom : 0.167 micros/op 5983920 ops/sec; 426.2 MB/s (1000000 of 1000000 found)
Multireadrandom with batch size 1:
multireadrandom : 0.176 micros/op 5684033 ops/sec; (1000000 of 1000000 found)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4754
Differential Revision: D13363550
Pulled By: anand1976
fbshipit-source-id: 6243e8de7dbd9c8bb490a8eca385da0c855b1dd4
Summary:
`rocksdb-shared.lib` is missing while `rocksdb.lib` and `rocksdb-shared.dll` are installed correctly.
Add `ARCHIVE DESTINATION` to fix this issue.
Refer to CMake doc for more details: [
https://cmake.org/cmake/help/v3.13/command/install.html#installing-targets](https://cmake.org/cmake/help/v3.13/command/install.html#installing-targets)
> ARCHIVE
> Static libraries are treated as ARCHIVE targets, except those marked with the FRAMEWORK property on macOS (see FRAMEWORK below.) For DLL platforms (all Windows-based systems including Cygwin), the DLL import library is treated as an ARCHIVE target.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4832
Differential Revision: D13566301
Pulled By: siying
fbshipit-source-id: 56e4ef82f7d5c63bd181ddf23b691336ad77881a
Summary:
The `flush_reason` parameter in `DBImpl::InstallSuperVersionAndScheduleWork` is
not used. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4816
Differential Revision: D13543218
Pulled By: riversand963
fbshipit-source-id: 8fc75d49462ce092e85aef0fe0c50936140db153
Summary:
Choose to preload some files if options.max_open_files != -1. This can slightly narrow the gap of performance between options.max_open_files is -1 and a large number. To avoid a significant regression to DB reopen speed if options.max_open_files != -1. Limit the files to preload in DB open time to 16.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3340
Differential Revision: D6686945
Pulled By: siying
fbshipit-source-id: 8ec11bbdb46e3d0cdee7b6ad5897a09c5a07869f
