Summary:
Release code now depends on gtest, indirectly through including "test_util/testharness.h". This creates multiple problems. One important reason is the definition of IGNORE_STATUS_IF_ERROR() in test_util/testharness.h. Move it to sync_point.h instead.
Note that utilities/cassandra/format.h still depends on "test_util/testharness.h". This will be resolved in a separate diff.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6907
Test Plan: Run all existing tests.
Reviewed By: ajkr
Differential Revision: D21829884
fbshipit-source-id: 9253c19ffde2936f3ae68998210f8e54f645a6e6
Summary:
* Print stack trace on status checked failure
* Make folly_synchronization_distributed_mutex_test a parallel test
* Disable ldb_test.py and rocksdb_dump_test.sh with
ASSERT_STATUS_CHECKED (broken)
* Fix shadow warning in random_access_file_reader.h reported by gcc
4.8.5 (ROCKSDB_NO_FBCODE), also https://github.com/facebook/rocksdb/issues/6866
* Work around compiler bug on max_align_t for gcc < 4.9
* Remove an apparently wrong comment in status.h
* Use check_some in Travis config (for proper diagnostic output)
* Fix ignored Status in loop in options_helper.cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6871
Test Plan: manual, CI
Reviewed By: ajkr
Differential Revision: D21706619
Pulled By: pdillinger
fbshipit-source-id: daf6364173d6689904eb394461a69a11f5bee2cb
Summary:
Fix a couple places where direct I/O was used even though it is
unsupported in lite builds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6867
Test Plan: `LITE=1 make check -j48`
Reviewed By: pdillinger
Differential Revision: D21689185
Pulled By: ajkr
fbshipit-source-id: 3eaa3abf69cd7d0bcaabbcad3bb5a26fb8dd7301
Summary:
* Add missing unit test for schema stability of FileChecksumGenCrc32c
(previously was only comparing to itself)
* A lot of clarifying comments
* Add some assertions for preconditions
* Rename WritableFileWriter::CalculateFileChecksum -> UpdateFileChecksum
* Simplify FileChecksumGenCrc32c with shared functions
* Implement EndianSwapValue to replace unused EndianTransform
And incidentally since I had trouble with 'make check-format' GitHub action disagreeing with local run,
* Output full diagnostic information when 'make check-format' fails in CI
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6861
Test Plan: new unit test passes before & after other changes
Reviewed By: zhichao-cao
Differential Revision: D21667115
Pulled By: pdillinger
fbshipit-source-id: 6a99970f87605aa024fa540c78cd519ff322c3e6
Summary:
Currently, in direct IO mode, `MultiGet` retrieves the data blocks one by one instead of in parallel, see `BlockBasedTable::RetrieveMultipleBlocks`.
Since direct IO is supported in `RandomAccessFileReader::MultiRead` in https://github.com/facebook/rocksdb/pull/6446, this PR applies `MultiRead` to `MultiGet` so that the data blocks can be retrieved in parallel.
Also, in direct IO mode and when data blocks are compressed and need to uncompressed, this PR only allocates one continuous aligned buffer to hold the data blocks, and then directly uncompress the blocks to insert into block cache, there is no longer intermediate copies to scratch buffers.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6815
Test Plan:
1. added a new unit test `BlockBasedTableReaderTest::MultiGet`.
2. existing unit tests and stress tests contain tests against `MultiGet` in direct IO mode.
Reviewed By: anand1976
Differential Revision: D21426347
Pulled By: cheng-chang
fbshipit-source-id: b8446ae0e74152444ef9111e97f8e402ac31b24f
Summary:
Originally, the checksum of appended data in writable file writer is calculated after the data is copied to the buffer. It will not be able to catch the bit flip happens during copy. Move the checksum calculation before it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6844
Test Plan: pass make asan_check
Reviewed By: cheng-chang
Differential Revision: D21576726
Pulled By: zhichao-cao
fbshipit-source-id: 0a062a1f19886f6ea0d4e3f557e6f4b799773254
Summary:
sst_dump can issue many file reads from the file system. This doesn't work well with file systems without a OS cache, especially remote file systems. In order to mitigate this problem, several improvements are done:
1. --readahead_size is added, so that users can specify readahead size when scanning the data.
2. Force a 512KB tail readahead, which prevents three I/Os for footer, meta index and property blocks and hopefully index and filter blocks too.
3. Consoldiate SSTDump's I/Os before opening the file for read. Use the same file prefetch buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6836
Test Plan: Add a test that covers this new feature.
Reviewed By: pdillinger
Differential Revision: D21516607
fbshipit-source-id: 3ae43526286f67b2f4a5bdedfbc92719d579b87e
Summary:
Tried making Status object enforce that it is checked in some way. In cases it is not checked, `PermitUncheckedError()` must be called explicitly.
Added a way to run tests (`ASSERT_STATUS_CHECKED=1 make -j48 check`) on a
whitelist. The effort appears significant to get each test to pass with
this assertion, so I only fixed up enough to get one test (`options_test`)
working and added it to the whitelist.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6798
Reviewed By: pdillinger
Differential Revision: D21377404
Pulled By: ajkr
fbshipit-source-id: 73236f9c8df38f01cf24ecac4a6d1661b72d077e
Summary:
The patch extends `FindObsoleteFiles` and `PurgeObsoleteFiles` with
support for blob files. The behavior is analogous to SST files: obsolete
blob files are put on the "candidates for deletion" list, while live (and pending)
files are preserved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6807
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21406249
Pulled By: ltamasi
fbshipit-source-id: 1948f71c31927564b61e8af394f50ca3964880d9
Summary:
Calculate ```IOOptions::timeout``` using ```ReadOptions::deadline``` and pass it to ```FileSystem::Read/FileSystem::MultiRead```. This allows us to impose a tighter bound on the time taken by Get/MultiGet on FileSystem/Envs that support IO timeouts. Even on those that don't support, check in ```RandomAccessFileReader::Read``` and ```MultiRead``` and return ```Status::TimedOut()``` if the deadline is exceeded.
For now, TableReader creation, which might do file opens and reads, are not covered. It will be implemented in another PR.
Tests:
Update existing unit tests to verify the correct timeout value is being passed
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6751
Reviewed By: riversand963
Differential Revision: D21285631
Pulled By: anand1976
fbshipit-source-id: d89af843e5a91ece866e87aa29438b52a65a8567
Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.
Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.
In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689
Test Plan: A new unit test `block_fetcher_test` is added.
Reviewed By: anand1976
Differential Revision: D21006729
Pulled By: cheng-chang
fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
Summary:
When aligned_buf is provided, the result slice's starting address should take offset advance into account.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6672
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D20934198
Pulled By: cheng-chang
fbshipit-source-id: c3475c9c132b92c50d8c7c399fca2e9e76870803
Summary:
In the current implementation, sst file checksum is calculated by a shared checksum function object, which may make some checksum function hard to be applied here such as SHA1. In this implementation, each sst file will have its own checksum generator obejct, created by FileChecksumGenFactory. User needs to implement its own FilechecksumGenerator and Factory to plugin the in checksum calculation method.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6600
Test Plan: tested with make asan_check
Reviewed By: riversand963
Differential Revision: D20717670
Pulled By: zhichao-cao
fbshipit-source-id: 2a74c1c280ac11a07a1980185b43b671acaa71c6
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.
This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602
Test Plan: make check
Reviewed By: siying, zhichao-cao
Differential Revision: D20683216
Pulled By: cheng-chang
fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
Summary:
Create a thread in DeleteScheduler only when delete rate limit is set
because when there is no rate limit on deletion, a thread per DeleteScheduler
consumes unnecessary resources.
Test Plan: make -j64 check
Reviewed By: riversand963
Differential Revision: D20538138
Pulled By: akankshamahajan15
fbshipit-source-id: 137499e810e817156345c30d627f8678b9adadf7
Summary:
`scratch` is not initialized in `Align` because it will be set outside of it. But clang analyzer is strict on initializing it before return.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6577
Test Plan: make analyze
Reviewed By: siying
Differential Revision: D20607303
Pulled By: cheng-chang
fbshipit-source-id: 2843d759345a057a8e122178d30b90deff0f9b2a
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.
Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334
Reviewed By: anand1976
Differential Revision: D19778960
Pulled By: riversand963
fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
Summary:
By supporting direct IO in RandomAccessFileReader::MultiRead, the benefits of parallel IO (IO uring) and direct IO can be combined.
In direct IO mode, read requests are aligned and merged together before being issued to RandomAccessFile::MultiRead, so blocks in the original requests might share the same underlying buffer, the shared buffers are returned in `aligned_bufs`, which is a new parameter of the `MultiRead` API.
For example, suppose alignment requirement for direct IO is 4KB, one request is (offset: 1KB, len: 1KB), another request is (offset: 3KB, len: 1KB), then since they all belong to page (offset: 0, len: 4KB), `MultiRead` only reads the page with direct IO into a buffer on heap, and returns 2 Slices referencing regions in that same buffer. See `random_access_file_reader_test.cc` for more examples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6446
Test Plan: Added a new test `random_access_file_reader_test.cc`.
Reviewed By: anand1976
Differential Revision: D20097518
Pulled By: cheng-chang
fbshipit-source-id: ca48a8faf9c3af146465c102ef6b266a363e78d1
Summary:
In direct IO mode, RandomAccessFileReader::Read allocates an internal aligned buffer, and then copies the result into the scratch buffer. If the result is only temporarily used inside a function, there is no need to do the memcpy and just let the result Slice refer to the internally allocated buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6455
Test Plan: make check
Differential Revision: D20106753
Pulled By: cheng-chang
fbshipit-source-id: 44f505843837bba47a56e3fa2c4dd3bd76486b58
Summary:
In the current code base, we can use Directory from Env to manage directory (e.g, Fsync()). The PR https://github.com/facebook/rocksdb/issues/5761 introduce the File System as a new Env API. So we further replace the Directory class in DB with FSDirectory such that we can have more IO information from IOStatus returned by FSDirectory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6468
Test Plan: pass make asan_check
Differential Revision: D20195261
Pulled By: zhichao-cao
fbshipit-source-id: 93962cb9436852bfcfb76e086d9e7babd461cbe1
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
Right, when reading from option files, no readahead is used and 8KB buffer is used. It might introduce high latency if the file system provide high latency and doesn't do readahead. Instead, introduce a readahead to the file. When calling inside DB, infer the value from options.log_readahead. Otherwise, a default 512KB readahead size is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6372
Test Plan: Add --log_readahead_size in db_bench. Run it with several options and observe read size from option files using strace.
Differential Revision: D19727739
fbshipit-source-id: e6d8053b0a64259abc087f1f388b9cd66fa8a583
Summary:
Before this PR it calls GetFileSize() once for each sst file in the DB. This can take a long time if there are be tens of thousands of sst files (e.g. in thousands of column families), and even longer if Env is talking to some remote service rather than local filesystem. This PR makes DB::Open() use sst file sizes that are already known from manifest (typically almost all files in the DB) and only call GetFileSize() for non-sst or obsolete files. Note that GetFileSize() is also called and checked against manifest in CheckConsistency(), so the calls in SstFileManagerImpl were completely redundant.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6363
Test Plan: deployed to a test cluster, looked at a dump of Env calls (from a custom instrumented Env) - no more thousands of GetFileSize()s.
Differential Revision: D19702509
Pulled By: al13n321
fbshipit-source-id: 99f8110620cb2e9d0c092dfcdbb11f3af4ff8b73
Summary:
Fix an intermittent failure in
DBErrorHandlingTest.CompactionManifestWriteError due to a race between
background error recovery and the main test thread calling
TEST_WaitForCompact().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6367
Test Plan: Run the test using gtest_parallel
Differential Revision: D19713802
Pulled By: anand1976
fbshipit-source-id: 29e35dc26e0984fe8334c083e059f4fa1f335d68
Summary:
Fix for issue https://github.com/facebook/rocksdb/issues/6316
When an append/sync of the manifest file fails due to an IO error such
as NoSpace, we don't always put the DB in read-only mode. This is true
for flush and compactions, as well as foreground operatons such as column family
add/drop, CompactFiles etc. Subsequent changes to the DB will be
recorded in the same manifest file, which would have a corrupted record
in the middle due to the previous failure. On next DB::Open(), it will
fail to process the full manifest and data will be lost.
To fix this, we reset VersionSet::descriptor_log_ on append/sync
failure, which will force a new manifest file to be written on the next
append.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6331
Test Plan: Add new unit tests in error_handler_test.cc
Differential Revision: D19632951
Pulled By: anand1976
fbshipit-source-id: 68d527cb6e59a94cbbbf9f5a17a7f464381d51e3
Summary:
In addition to removing the earlier partially implemented garbage collection
logic from the BlobDB codebase, the patch also removes the test cases (as well as
the related sync points, as appropriate) that were only relevant for the old
implementation, and reworks the remaining ones so they use the new GC logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6278
Test Plan: `make check`
Differential Revision: D19335226
Pulled By: ltamasi
fbshipit-source-id: 0cc1794bc9892feda1426ed5522a318f3cb1b692
Summary:
Right now, sometimes file prefetching is still on when mmap is enabled. This causes bug of reading wrong data. In this commit, we remove all those possible paths.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6206
Test Plan: make crash_test with compaction_readahead_size, which used to fail. RUn all existing tests.
Differential Revision: D19149429
fbshipit-source-id: 9e18ea8c566e416aac9647bdd05afe596634791b
Summary:
The bad code was:
```
mutex.Lock(); // `mutex` protects `container`
for (auto& x : container) {
mutex.Unlock();
// do stuff to x
mutex.Lock();
}
```
It's incorrect because both `x` and the iterator may become invalid if another thread modifies the container while this thread is not holding the mutex.
Broken by https://github.com/facebook/rocksdb/pull/5796 - it replaced a `while (!container.empty())` loop with a `for (auto x : container)`.
(RocksDB code does a lot of such unlocking+re-locking of mutexes, and this type of bugs comes up a lot :/ )
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6193
Test Plan: Ran some logdevice integration tests that were crashing without this fix.
Differential Revision: D19116874
Pulled By: al13n321
fbshipit-source-id: 9672bc4227c1b68f46f7436db2b96811adb8c703
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
Unity build fails because of name conflict of IsFileSectorAligned() after recent refactoring. Consolidate the function.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5812
Test Plan: make unity. At least the failure goes away. Also "make all", "make release" and see no regression in normal cases.
Differential Revision: D17411403
fbshipit-source-id: 09d5653471ae2c3a4d898e120a024f7dd08d9c9d
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725
Test Plan: Added unit tests.
Differential Revision: D16963840
Pulled By: vjnadimpalli
fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
Currently in `DBImpl::PurgeObsoleteFiles`, the list of candidate files is create through a combination of calling LogFileName using `log_delete_files` and `full_scan_candidate_files`.
In full_scan_candidate_files, the filenames look like this
{file_name = "074715.log", file_path = "/txlogs/3306"},
but LogFileName produces filenames like this that prepends a slash:
{file_name = "/074715.log", file_path = "/txlogs/3306"},
This confuses the dedup step here: bb4178066d/db/db_impl/db_impl_files.cc (L339-L345)
Because duplicates still exist, DeleteFile is called on the same file twice, and hits an error on the second try. Error message: Failed to mark /txlogs/3302/764418.log as trash.
The root cause is the use of `kDumbDbName` when generating file names, it creates file names like /074715.log. This PR removes the use of `kDumbDbName` and create paths without leading '/' when dbname can be ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5603
Test Plan: make check
Differential Revision: D16413203
Pulled By: miasantreble
fbshipit-source-id: 6ba8288382c55f7d5e3892d722fc94b57d2e4491
Summary:
https://github.com/facebook/rocksdb/pull/5520 caused a buffer overflow bug in DBWALTest.kTolerateCorruptedTailRecords. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5550
Test Plan: Run the test in UBSAN. It used to fail. Not it succeeds.
Differential Revision: D16165516
fbshipit-source-id: 42c56a6bc64eb091f054b87757fcbef60da825f7
Summary:
1. Cleanup WAL trash files on open
2. Don't apply deletion rate limit if WAL dir is different from db dir
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5520
Test Plan: Add new unit tests and make check
Differential Revision: D16096750
Pulled By: anand1976
fbshipit-source-id: 6f07858ad864b754b711db416f0389c45ede599b
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
Clang analyzer is reporting a false positive warning thinking `type` is uninitialized. The variable is initialized by `ParseFileName` by reference so assigning a default value to keep clang happy.
Current failure:
```
file/filename.cc:435:15: warning: The left operand of '==' is a garbage value
(type == kInfoLogFile)) {
~~~~ ^
1 warning generated.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5398
Differential Revision: D15588421
Pulled By: miasantreble
fbshipit-source-id: fb121c270300f3a659e68bc7f6674ff4ddf2df9a
Summary:
Right now, with auto roll logger, options.keep_log_file_num enforcement is triggered by events like DB reopen or full obsolete scan happens. In the mean time, the size and number of log files can grow without a limit. We put a stronger enforcement to the option, so that the number of log files can always under control.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5370
Differential Revision: D15570413
Pulled By: siying
fbshipit-source-id: 0916c3c4d42ab8fdd29389ee7fd7e1557b03176e
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
