Summary:
ReadOptions.fill_cache is set in compaction inputs and can be set by users in their queries too. It tells RocksDB not to put a data block used to block cache.
The memory used by the data block is, however, not trackable by users.
To make the system more manageable, we can cost the block to block cache while using it, and then release it after using.
Closes https://github.com/facebook/rocksdb/pull/3333
Differential Revision: D6670230
Pulled By: miasantreble
fbshipit-source-id: ab848d3ed286bd081a13ee1903de357b56cbc308
Summary: Grandfather in super old lint issues to make a clean slate for moving forward that allows us to have stronger enforcement on new issues.
Reviewed By: yiwu-arbug
Differential Revision: D6821806
fbshipit-source-id: 22797d31ec58e9eb0255d3b66fedfcfcb0dc127c
Summary:
This change improves the performance of iterators doing long range scans (e.g. big/full table scans in MyRocks) by using readahead and prefetching additional data on each disk IO. This prefetching is automatically enabled on noticing more than 2 IOs for the same table file during iteration. The readahead size starts with 8KB and is exponentially increased on each additional sequential IO, up to a max of 256 KB. This helps in cutting down the number of IOs needed to complete the range scan.
Constraints:
- The prefetched data is stored by the OS in page cache. So this currently works only for non direct-reads use-cases i.e applications which use page cache. (Direct-I/O support will be enabled in a later PR).
- This gets currently enabled only when ReadOptions.readahead_size = 0 (which is the default value).
Thanks to siying for the original idea and implementation.
**Benchmarks:**
Data fill:
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=fillrandom -num=1000000000 -compression_type="none" -level_compaction_dynamic_level_bytes
```
Do a long range scan: Seekrandom with large number of nexts
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=seekrandom -duration=60 -num=1000000000 -use_existing_db -seek_nexts=10000 -statistics -histogram
```
Page cache was cleared before each experiment with the command:
```
sudo sh -c "echo 3 > /proc/sys/vm/drop_caches"
```
```
Before:
seekrandom : 34020.945 micros/op 29 ops/sec; 32.5 MB/s (1636 of 1999 found)
With this change:
seekrandom : 8726.912 micros/op 114 ops/sec; 126.8 MB/s (5702 of 6999 found)
```
~3.9X performance improvement.
Also verified with strace and gdb that the readahead size is increasing as expected.
```
strace -e readahead -f -T -t -p <db_bench process pid>
```
Closes https://github.com/facebook/rocksdb/pull/3282
Differential Revision: D6586477
Pulled By: sagar0
fbshipit-source-id: 8a118a0ed4594fbb7f5b1cafb242d7a4033cb58c
Summary:
This is a pre-cleaning up before a major block based table iterator refactoring. BlockBasedTable::NewDataBlockIterator() will always return BlockIter. This simplifies the logic and code and enable further refactoring and optimization.
Closes https://github.com/facebook/rocksdb/pull/3398
Differential Revision: D6780165
Pulled By: siying
fbshipit-source-id: 273f7dc896724f682c0118fb69a359d9cc4418b4
Summary:
* Fix DBTest.CompactRangeWithEmptyBottomLevel lite build failure
* Fix DBTest.AutomaticConflictsWithManualCompaction failure introduce by #3366
* Fix BlockBasedTableTest::IndexUncompressed should be disabled if snappy is disabled
* Fix ASAN failure with DBBasicTest::DBClose test
Closes https://github.com/facebook/rocksdb/pull/3373
Differential Revision: D6732313
Pulled By: yiwu-arbug
fbshipit-source-id: 1eb9b9d9a8d795f56188fa9770db9353f6fdedc5
Summary:
Re-use metadata for reading Compression Dictionary on BlockBased
table open, this saves two reads from disk.
This helps to our 999 percentile in 5.6.1 where prefetch buffer is not present.
Closes https://github.com/facebook/rocksdb/pull/3354
Differential Revision: D6695753
Pulled By: ajkr
fbshipit-source-id: bb8acd9e9e66e65b89c548ab8940570ae360333c
Summary:
BlockTest.BlockReadAmpBitmap is too slow and times out in some environments. Speed it up by:
(1) improve the way the verification is done. With this it is 5 times faster
(2) run fewer tests for large blocks. This cut it down by another 10 times.
Now it can finish in similar time as other tests.
Closes https://github.com/facebook/rocksdb/pull/3313
Differential Revision: D6643711
Pulled By: siying
fbshipit-source-id: c2397d666eab5421a78ca87e1e45491e0f832a6d
Summary:
NUMBER_BLOCK_DECOMPRESSED and NUMBER_BLOCK_COMPRESSED are not reported unless the stats level contain detailed timers, which is wrong. They are normal counters. Fix it.
Closes https://github.com/facebook/rocksdb/pull/3263
Differential Revision: D6552519
Pulled By: siying
fbshipit-source-id: 40899ccea7b2856bb39752616657c0bfd432f6f9
Summary:
Some call sites of BlockFetcher create temporary ReadOptions and pass to BlockFetcher. The temporary object will be gone after BlockFetcher construction but BlockFetcher keep its reference, causing stack-use-after-scope. Fixing it.
Closes https://github.com/facebook/rocksdb/pull/3258
Differential Revision: D6547152
Pulled By: yiwu-arbug
fbshipit-source-id: 6b49e9dd46bb72307f5d8f88ea15faacff35b9bc
Summary:
Divide ReadBlockContents() to multiple sub-functions. Maintaining the input and intermediate data in a new class BlockFetcher.
I hope in general it makes the code easier to maintain.
Another motivation to do it is to clearly divide the logic before file reading and after file reading. The refactor will help us evaluate how can we make I/O async in the future.
Closes https://github.com/facebook/rocksdb/pull/3244
Differential Revision: D6520983
Pulled By: siying
fbshipit-source-id: 338d90bc0338472d46be7a7682028dc9114b12e9
Summary:
table/block.cc:
420 }
CID 1396127 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
7. uninit_member: Non-static class member restart_offset_ is not initialized in this constructor nor in any functions that it calls.
421}
table/block_based_table_builder.cc:
CID 1418259 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
7. uninit_member: Non-static class member compressed_cache_key_prefix_size is not initialized in this constructor nor in any functions that it calls.
table/block_based_table_reader.h:
3. uninit_member: Non-static class member index_type is not initialized in this constructor nor in any functions that it calls.
CID 1396147 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
5. uninit_member: Non-static class member hash_index_allow_collision is not initialized in this constructor nor in any functions that it calls.
413 global_seqno(kDisableGlobalSequenceNumber) {}
414
table/cuckoo_table_reader.cc:
55 if (hash_funs == user_props.end()) {
56 status_ = Status::Corruption("Number of hash functions not found");
5. uninit_member: Non-static class member is_last_level_ is not initialized in this constructor nor in any functions that it calls.
7. uninit_member: Non-static class member identity_as_first_hash_ is not initialized in this constructor nor in any functions that it calls.
9. uninit_member: Non-static class member use_module_hash_ is not initialized in this constructor nor in any functions that it calls.
11. uninit_member: Non-static class member num_hash_func_ is not initialized in this constructor nor in any functions that it calls.
13. uninit_member: Non-static class member key_length_ is not initialized in this constructor nor in any functions that it calls.
15. uninit_member: Non-static class member user_key_length_ is not initialized in this constructor nor in any functions that it calls.
17. uninit_member: Non-static class member value_length_ is not initialized in this constructor nor in any functions that it calls.
19. uninit_member: Non-static class member bucket_length_ is not initialized in this constructor nor in any functions that it calls.
21. uninit_member: Non-static class member cuckoo_block_size_ is not initialized in this constructor nor in any functions that it calls.
23. uninit_member: Non-static class member cuckoo_block_bytes_minus_one_ is not initialized in this constructor nor in any functions that it calls.
CID 1322785 (#2 of 2): Uninitialized scalar field (UNINIT_CTOR)
25. uninit_member: Non-static class member table_size_ is not initialized in this constructor nor in any functions that it calls.
57 return;
table/plain_table_index.h:
2. uninit_member: Non-static class member index_size_ is not initialized in this constructor nor in any functions that it calls.
CID 1322801 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
4. uninit_member: Non-static class member sub_index_size_ is not initialized in this constructor nor in any functions that it calls.
128 huge_page_tlb_size_(huge_page_tlb_size) {}
129
Closes https://github.com/facebook/rocksdb/pull/3113
Differential Revision: D6505719
Pulled By: yiwu-arbug
fbshipit-source-id: 38f44d8f9dfefb4c2e25d83b8df25a5201c75618
Summary:
I started adding gflags support for cmake on linux and got frustrated that I'd need to duplicate the build_detect_platform logic, which determines namespace based on attempting compilation. We can do it differently -- use the GFLAGS_NAMESPACE macro if available, and if not, that indicates it's an old gflags version without configurable namespace so we can simply hardcode "google".
Closes https://github.com/facebook/rocksdb/pull/3212
Differential Revision: D6456973
Pulled By: ajkr
fbshipit-source-id: 3e6d5bde3ca00d4496a120a7caf4687399f5d656
Summary:
The ASCII output is almost always useless to me as the first '\0' byte in the key or value causes it to stop printing. Since all characters are already surrounded by spaces, "\ 0" (how we display a backslash followed by a zero) and "\0" (how this PR displays a null terminator) are distinguishable. My assumption is the value of seeing all the bytes outweighs the value of the alignment we had before, where we always had one character followed by one space.
Closes https://github.com/facebook/rocksdb/pull/3203
Differential Revision: D6428651
Pulled By: ajkr
fbshipit-source-id: aafc978a51e9ea029cfe3e763e2bb0e1751b9ccf
Summary:
Problem: Option string accepts only cache_size as parameter for block_cache which is specified as "block_cache=1M".
It doesn't accept other parameters like num_shards etc.
Changes :
1) ParseBlockBasedTableOption in block_based_table_factory is edited to accept cache options in the format "block_cache=<cache_size>:<num_shard_bits>:<strict_capacity_limit>:<high_pri_pool_ratio>".
Options other than cache_size are optional to maintain backward compatibility. The changes are valid for block_cache_compressed as well.
For example, "block_cache=1M:6:true:0.5", "block_cache=1M:6:true", "block_cache=1M:6" and "block_cache=1M" are all valid option strings.
2) Corresponding unit tests are added.
Closes https://github.com/facebook/rocksdb/pull/3108
Differential Revision: D6420997
Pulled By: sagar0
fbshipit-source-id: cdea8b785688d2802907974af27225ccc1c0cd43
Summary:
block_size_deviation is in percentage while the partition size is in bytes. The current code fails to take that into account resulting into very large target size for filter partitions.
Closes https://github.com/facebook/rocksdb/pull/3187
Differential Revision: D6376069
Pulled By: maysamyabandeh
fbshipit-source-id: 276546fc68f50e0da32c462abb46f6cf676db9b2
Summary:
We don't propagate TableProperty::oldest_key_time on compaction and just write the default value to SST files. It is more natural to default the value to 0.
Also revert db_sst_test back to before #2842.
Closes https://github.com/facebook/rocksdb/pull/3079
Differential Revision: D6165702
Pulled By: yiwu-arbug
fbshipit-source-id: ca3ce5928d96ae79a5beb12bb7d8c640a71478a0
Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.
My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842
Differential Revision: D5770600
Pulled By: yiwu-arbug
fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a
Summary:
Currently, RocksDB does not allow reopening a preexisting DB with no merge operator defined, with a merge operator defined. This means that if a DB ever want to add a merge operator, there's no way to do so currently.
Fix this by adding a new verification type `kByNameAllowFromNull` which will allow old values to be nullptr, and new values to be non-nullptr.
Closes https://github.com/facebook/rocksdb/pull/2958
Differential Revision: D5961131
Pulled By: lth
fbshipit-source-id: 06179bebd0d90db3d43690b5eb7345e2d5bab1eb
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).
The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().
Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886
Differential Revision: D5838431
Pulled By: yiwu-arbug
fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
Summary:
In SST files, restart interval helps us search in data blocks. However, some meta blocks will be read sequentially, so there's no need for restart points. Restart interval will introduce extra space in the block (https://github.com/facebook/rocksdb/blob/master/table/block_builder.cc#L80). We will see if we can remove this redundant space. (Maybe set restart interval to infinite.)
Closes https://github.com/facebook/rocksdb/pull/2940
Differential Revision: D5930139
Pulled By: miasantreble
fbshipit-source-id: 92b1b23c15cffa90378343ac846b713623b19c21
Summary:
When using with compressed cache it is possible that the status is ok but the block is not actually added to the block cache. The patch takes this case into account.
Closes https://github.com/facebook/rocksdb/pull/2945
Differential Revision: D5937613
Pulled By: maysamyabandeh
fbshipit-source-id: 5428cf1115e5046b3d01ab78d26cb181122af4c6
Summary:
For every merge operand encountered for a key in the read path we now have the ability to decide whether to look further (to retrieve more merge operands for the key) or stop and invoke the merge operator to return the value. The user needs to override `ShouldMerge()` method with a condition to terminate search when true to avail this facility.
This has a couple of advantages:
1. It helps in limiting the number of merge operands that are looked at to compute a value as part of a user Get operation.
2. It allows to peek at a merge key-value to see if further merge operands need to look at.
Example: Limiting the number of merge operands that are looked at: Lets say you have 10 merge operands for a key spread over various levels. If you only want RocksDB to look at the latest two merge operands instead of all 10 to compute the value, it is now possible with this PR. You can set the condition in `ShouldMerge()` to return true when the size of the operand list is 2. Look at the example implementation in the unit test. Without this PR, a Get might look at all the 10 merge operands in different levels before invoking the merge-operator.
Added a new unit test.
Made sure that there is no perf regression by running benchmarks.
Command line to Load data:
```
TEST_TMPDIR=/dev/shm ./db_bench --benchmarks="mergerandom" --merge_operator="uint64add" --num=10000000
...
mergerandom : 12.861 micros/op 77757 ops/sec; 8.6 MB/s ( updates:10000000)
```
**ReadRandomMergeRandom bechmark results:**
Command line:
```
TEST_TMPDIR=/dev/shm ./db_bench --benchmarks="readrandommergerandom" --merge_operator="uint64add" --num=10000000
```
Base -- Without this code change (on commit fc7476b):
```
readrandommergerandom : 38.586 micros/op 25916 ops/sec; (reads:3001599 merges:6998401 total:10000000 hits:842235 maxlength:8)
```
With this code change:
```
readrandommergerandom : 38.653 micros/op 25870 ops/sec; (reads:3001599 merges:6998401 total:10000000 hits:842235 maxlength:8)
```
Closes https://github.com/facebook/rocksdb/pull/2923
Differential Revision: D5898239
Pulled By: sagar0
fbshipit-source-id: daefa325019f77968639a75c851d46352c2303ef
Summary:
A user encountered segfault on the call to `CacheDependencies()`, probably because `NewIndexIterator()` failed before populating `*index_entry`. Let's avoid the call in that case.
Closes https://github.com/facebook/rocksdb/pull/2939
Differential Revision: D5928611
Pulled By: ajkr
fbshipit-source-id: 484be453dbb00e5e160e9c6a1bc933df7d80f574
Summary:
Three small optimizations:
(1) iter_->IsKeyPinned() shouldn't be called if read_options.pin_data is not true. This may trigger function call all the way down the iterator tree.
(2) reuse the iterator key object in DBIter::FindNextUserEntryInternal(). The constructor of the class has some overheads.
(3) Move the switching direction logic in MergingIterator::Next() to a separate function.
These three in total improves readseq performance by about 3% in my benchmark setting.
Closes https://github.com/facebook/rocksdb/pull/2880
Differential Revision: D5829252
Pulled By: siying
fbshipit-source-id: 991aea10c6d6c3b43769cb4db168db62954ad1e3
Summary:
Merging iterator invokes InternalKeyComparator.Compare() frequently to heap merge. By making InternalKeyComparator final and merging iterator to directly use InternalKeyComparator rather than through Iterator interface, we can give compiler a choice to avoid one more virtual function call if possible. I ran readseq benchmark in memory-only use case to make sure the performance at least doesn't regress.
I have to disable the final key word in debug build, as a hack test class depends on overriding the class.
Closes https://github.com/facebook/rocksdb/pull/2860
Differential Revision: D5800461
Pulled By: siying
fbshipit-source-id: ab876f22a09bb5c560740911412336e0e25ccb53
Summary:
This patch instruments the read path to verify each read value against an optional ReadCallback class. If the value is rejected, the reader moves on to the next value. The WritePreparedTxn makes use of this feature to skip sequence numbers that are not in the read snapshot.
Closes https://github.com/facebook/rocksdb/pull/2850
Differential Revision: D5787375
Pulled By: maysamyabandeh
fbshipit-source-id: 49d808b3062ab35e7ae98ad388f659757794184c
Summary:
store a zero as the checksum when disabled since it's easier to keep block trailer a fixed length.
Closes https://github.com/facebook/rocksdb/pull/2781
Differential Revision: D5694702
Pulled By: ajkr
fbshipit-source-id: 69cea9da415778ba2b600dfd9d0dfc8cb5188ecd
Summary:
This is the warning that clang considers a bug and has been causing it to fail:
```
table/block_based_table_reader.cc:240:27: warning: Potential leak of memory pointed to by 'block.value'
for (; biter.Valid(); biter.Next()) {
^~~~~
```
Actually clang just doesn't have enough knowledge to statically determine it's safe. We can teach it using an assert.
Closes https://github.com/facebook/rocksdb/pull/2779
Differential Revision: D5691225
Pulled By: ajkr
fbshipit-source-id: 3f0d545bf44636953b30ee5243c63239e8f16d8e
Summary:
Allow `Slice` holding nullptr as a sentinel value but not in comparisons. This new restriction eliminates the need for the manual checks in 39ef900551, while still conforming to glibc's `memcmp` API. Thanks siying for the idea. Users may need to migrate, so mentioned it in HISTORY.md.
Closes https://github.com/facebook/rocksdb/pull/2777
Differential Revision: D5686016
Pulled By: ajkr
fbshipit-source-id: 03a2ca3fd9a0ebade9d0d5686c81d59a9534f563
Summary:
This is the continuation of https://github.com/facebook/rocksdb/pull/2661 for filter partitions. When pin_l0 is set (along with cache_xxx), then open table open the filter partitions are loaded into the cache and pinned there.
Closes https://github.com/facebook/rocksdb/pull/2766
Differential Revision: D5671098
Pulled By: maysamyabandeh
fbshipit-source-id: 174f24018f1d7f1129621e7380287b65b67d2115
Summary:
This fixes the existing logic for pinning l0 index partitions. The patch preloads the partitions into block cache and pin them if they belong to level 0 and pin_l0 is set.
The drawback is that it does many small IOs when preloading all the partitions into the cache is direct io is enabled. Working for a solution for that.
Closes https://github.com/facebook/rocksdb/pull/2661
Differential Revision: D5554010
Pulled By: maysamyabandeh
fbshipit-source-id: 1e6f32a3524d71355c77d4138516dcfb601ca7b2
Summary:
Right now, if direct I/O is enabled, prefetching the last 512KB cannot be applied, except compaction inputs or readahead is enabled for iterators. This can create a lot of I/O for HDD cases. To solve the problem, the 512KB is prefetched in block based table if direct I/O is enabled. The prefetched buffer is passed in totegher with random access file reader, so that we try to read from the buffer before reading from the file. This can be extended in the future to support flexible user iterator readahead too.
Closes https://github.com/facebook/rocksdb/pull/2708
Differential Revision: D5593091
Pulled By: siying
fbshipit-source-id: ee36ff6d8af11c312a2622272b21957a7b5c81e7
Summary:
We need a tool to check any sst file corruption in the db.
It will check all the sst files in current version and read all the blocks (data, meta, index) with checksum verification. If any verification fails, the function will return non-OK status.
Closes https://github.com/facebook/rocksdb/pull/2498
Differential Revision: D5324269
Pulled By: lightmark
fbshipit-source-id: 6f8a272008b722402a772acfc804524c9d1a483b
Summary:
Replace dynamic_cast<> so that users can choose to build with RTTI off, so that they can save several bytes per object, and get tiny more memory available.
Some nontrivial changes:
1. Add Comparator::GetRootComparator() to get around the internal comparator hack
2. Add the two experiemental functions to DB
3. Add TableFactory::GetOptionString() to avoid unnecessary casting to get the option string
4. Since 3 is done, move the parsing option functions for table factory to table factory files too, to be symmetric.
Closes https://github.com/facebook/rocksdb/pull/2645
Differential Revision: D5502723
Pulled By: siying
fbshipit-source-id: fd13cec5601cf68a554d87bfcf056f2ffa5fbf7c
Summary:
Breaking commit: d12691b86f
In the above commit, I moved the `TableCache` cleanup logic from `Version` destructor into `PurgeObsoleteFiles`. I missed cleaning up `TableCache` entries for the current `Version` during DB destruction.
This PR adds that logic to `VersionSet` destructor. One unfortunate side effect is now we're potentially deleting `TableReader`s after `column_family_set_.reset()`, which means we can't call `BlockBasedTableReader::Close` a second time as the block cache might already be destroyed.
Closes https://github.com/facebook/rocksdb/pull/2662
Differential Revision: D5515108
Pulled By: ajkr
fbshipit-source-id: 2cb820e19aa813e0d258d17f76b2d7b6b7ee0b18
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
This patch enables using PinnableSlice for RowCache, changes include
not releasing the cache handle immediately after lookup in TableCache::Get, instead pass a Cleanble function which does Cache::RleaseHandle.
Closes https://github.com/facebook/rocksdb/pull/2492
Differential Revision: D5316216
Pulled By: maysamyabandeh
fbshipit-source-id: d2a684bd7e4ba73772f762e58a82b5f4fbd5d362
Summary:
In gcc-7 the following is an error identified by -Werror=class-memaccess
In file included from ./table/get_context.h:14:0,
from db/version_set.cc:43:
./table/block.h: In constructor ‘rocksdb::BlockReadAmpBitmap::BlockReadAmpBitmap(size_t, size_t, rocksdb::Statistics*)’:
./table/block.h:73:53: error: ‘void* memset(void*, int, size_t)’ clearing an object of type ‘struct std::atomic<unsigned int>’ with no trivial copy-assignment; use value-initialization instead [-Werror=class-memaccess]
memset(bitmap_, 0, bitmap_size * kBytesPersEntry);
^
In file included from ./db/version_set.h:23:0,
from db/version_set.cc:12:
/toolchain/include/c++/8.0.0/atomic:684:12: note: ‘struct std::atomic<unsigned int>’ declared here
struct atomic<unsigned int> : __atomic_base<unsigned int>
^~~~~~~~~~~~~~~~~~~~
As a solution the default initializer can be applied in list context.
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
Closes https://github.com/facebook/rocksdb/pull/2561
Differential Revision: D5398714
Pulled By: siying
fbshipit-source-id: d883fb88ec7535eee60d551038fe91f14488be36
Summary:
this modify allows third-party tables able to support delete range
Closes https://github.com/facebook/rocksdb/pull/2035
Differential Revision: D5407973
Pulled By: ajkr
fbshipit-source-id: 82e364b7dd5a198660788d59543f15b8f95cc418
Summary:
The casting seemed to cause a problem.
I think this might increase it to unsigned long.
Closes https://github.com/facebook/rocksdb/pull/2562
Differential Revision: D5406842
Pulled By: siying
fbshipit-source-id: 736adef31448229a58a1a48bdbe77792f36736e8
Summary:
Valgrind reports that it is not initialized.
Closes https://github.com/facebook/rocksdb/pull/2541
Differential Revision: D5376084
Pulled By: maysamyabandeh
fbshipit-source-id: 55c312f4f506863aa0d25ff92c8c34b57f48b860
Summary:
Currently metadata_block_size controls only index partition size. With this patch a partition is cut after any of index or filter partitions reaches metadata_block_size.
Closes https://github.com/facebook/rocksdb/pull/2452
Differential Revision: D5275651
Pulled By: maysamyabandeh
fbshipit-source-id: 5057e4424b4c8902043782e6bf8c38f0c4f25160
Summary:
We've got some DBs where iterators return Status with message "Corruption: block checksum mismatch" all the time. That's not very informative. It would be much easier to investigate if the error message contained the file name - then we would know e.g. how old the corrupted file is, which would be very useful for finding the root cause. This PR adds file name, offset and other stuff to some block corruption-related status messages.
It doesn't improve all the error messages, just a few that were easy to improve. I'm mostly interested in "block checksum mismatch" and "Bad table magic number" since they're the only corruption errors that I've ever seen in the wild.
Closes https://github.com/facebook/rocksdb/pull/2507
Differential Revision: D5345702
Pulled By: al13n321
fbshipit-source-id: fc8023d43f1935ad927cef1b9c55481ab3cb1339
Summary:
Introducing FIFO compactions with TTL.
FIFO compaction is based on size only which makes it tricky to enable in production as use cases can have organic growth. A user requested an option to drop files based on the time of their creation instead of the total size.
To address that request:
- Added a new TTL option to FIFO compaction options.
- Updated FIFO compaction score to take TTL into consideration.
- Added a new table property, creation_time, to keep track of when the SST file is created.
- Creation_time is set as below:
- On Flush: Set to the time of flush.
- On Compaction: Set to the max creation_time of all the files involved in the compaction.
- On Repair and Recovery: Set to the time of repair/recovery.
- Old files created prior to this code change will have a creation_time of 0.
- FIFO compaction with TTL is enabled when ttl > 0. All files older than ttl will be deleted during compaction. i.e. `if (file.creation_time < (current_time - ttl)) then delete(file)`. This will enable cases where you might want to delete all files older than, say, 1 day.
- FIFO compaction will fall back to the prior way of deleting files based on size if:
- the creation_time of all files involved in compaction is 0.
- the total size (of all SST files combined) does not drop below `compaction_options_fifo.max_table_files_size` even if the files older than ttl are deleted.
This feature is not supported if max_open_files != -1 or with table formats other than Block-based.
**Test Plan:**
Added tests.
**Benchmark results:**
Base: FIFO with max size: 100MB ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100
readwhilewriting : 1.924 micros/op 519858 ops/sec; 13.6 MB/s (1176277 of 5000000 found)
```
With TTL (a low one for testing) ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 --fifo_compaction_ttl=20
readwhilewriting : 1.902 micros/op 525817 ops/sec; 13.7 MB/s (1185057 of 5000000 found)
```
Example Log lines:
```
2017/06/26-15:17:24.609249 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609177) [db/compaction_picker.cc:1471] [default] FIFO compaction: picking file 40 with creation time 1498515423 for deletion
2017/06/26-15:17:24.609255 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609234) [db/db_impl_compaction_flush.cc:1541] [default] Deleted 1 files
...
2017/06/26-15:17:25.553185 7fd5a61a5800 [DEBUG] [db/db_impl_files.cc:309] [JOB 0] Delete /dev/shm/dbbench/000040.sst type=2 #40 -- OK
2017/06/26-15:17:25.553205 7fd5a61a5800 EVENT_LOG_v1 {"time_micros": 1498515445553199, "job": 0, "event": "table_file_deletion", "file_number": 40}
```
SST Files remaining in the dbbench dir, after db_bench execution completed:
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ ls -l /dev/shm//dbbench/*.sst
-rw-r--r--. 1 svemuri users 30749887 Jun 26 15:17 /dev/shm//dbbench/000042.sst
-rw-r--r--. 1 svemuri users 30768779 Jun 26 15:17 /dev/shm//dbbench/000044.sst
-rw-r--r--. 1 svemuri users 30757481 Jun 26 15:17 /dev/shm//dbbench/000046.sst
```
Closes https://github.com/facebook/rocksdb/pull/2480
Differential Revision: D5305116
Pulled By: sagar0
fbshipit-source-id: 3e5cfcf5dd07ed2211b5b37492eb235b45139174
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
We currently do not support partitioning filters if indexes are not partitioned. The patch makes sure that these two are consistent.
Closes https://github.com/facebook/rocksdb/pull/2455
Differential Revision: D5275644
Pulled By: maysamyabandeh
fbshipit-source-id: b61701ac8914c2206d06f5e33ff6f67b24406d1d
Summary:
When Partitioning index/filter is enabled the user might need to check the index block size as well as the top-level index size via sst_dump. This patch records i) number of partitions, ii) top-level index size and make it accessible through sst_dump. The number of partitions for filters is the same as that of indexes. The top-level index for filters has a similar size to top-level index for indexes, so it is not repeated.
Closes https://github.com/facebook/rocksdb/pull/2437
Differential Revision: D5224225
Pulled By: maysamyabandeh
fbshipit-source-id: 5324598c75793523aef1bb7ee225a5475e95a9cb
Summary:
We estimate number of reads per SST files, by updating the counter per file in sampled read requests. This information can later be used to trigger compactions to improve read performacne.
Closes https://github.com/facebook/rocksdb/pull/2417
Differential Revision: D5193528
Pulled By: siying
fbshipit-source-id: b4241c5ad0eaf444b61afb53f8e6290d9f5da2df
Summary:
filter_block_set_ access must also be protected with mutex.
Closes https://github.com/facebook/rocksdb/pull/2413
Differential Revision: D5193159
Pulled By: maysamyabandeh
fbshipit-source-id: 6987fc219d9a65c20b9c7e52151aef4b8e4882e6
Summary:
… headers
https://github.com/facebook/rocksdb/pull/2199 should not reference RocksDB-specific macros (like ROCKSDB_SUPPORT_THREAD_LOCAL in this case) to public headers, `iostats_context.h` and `perf_context.h`. We shouldn't do that because users have to provide these compiler flags when building their binary with RocksDB.
We should hide the thread local global variable inside our implementation and just expose a function api to retrieve these variables. It may break some users for now but good for long term.
make check -j64
Closes https://github.com/facebook/rocksdb/pull/2380
Differential Revision: D5177896
Pulled By: lightmark
fbshipit-source-id: 6fcdfac57f2e2dcfe60992b7385c5403f6dcb390
Summary:
Fixes the following scenario:
1. Set prefix extractor. Enable bloom filters, with `whole_key_filtering = false`. Use compaction filter that sometimes returns `kRemoveAndSkipUntil`.
2. Do a compaction.
3. Compaction creates an iterator with `total_order_seek = false`, calls `SeekToFirst()` on it, then repeatedly calls `Next()`.
4. At some point compaction filter returns `kRemoveAndSkipUntil`.
5. Compaction calls `Seek(skip_until)` on the iterator. The key that it seeks to happens to have prefix that doesn't match the bloom filter. Since `total_order_seek = false`, iterator becomes invalid, and compaction thinks that it has reached the end. The rest of the compaction input is silently discarded.
The fix is to make compaction iterator use `total_order_seek = true`.
The implementation for PlainTable is quite awkward. I've made `kRemoveAndSkipUntil` officially incompatible with PlainTable. If you try to use them together, compaction will fail, and DB will enter read-only mode (`bg_error_`). That's not a very graceful way to communicate a misconfiguration, but the alternatives don't seem worth the implementation time and complexity. To be able to check in advance that `kRemoveAndSkipUntil` is not going to be used with PlainTable, we'd need to extend the interface of either `CompactionFilter` or `InternalIterator`. It seems unlikely that anyone will ever want to use `kRemoveAndSkipUntil` with PlainTable: PlainTable probably has very few users, and `kRemoveAndSkipUntil` has only one user so far: us (logdevice).
Closes https://github.com/facebook/rocksdb/pull/2349
Differential Revision: D5110388
Pulled By: lightmark
fbshipit-source-id: ec29101a99d9dcd97db33923b87f72bce56cc17a
Summary:
Some users want to monitor column family activity in their custom memtable implementations. Previously there was no way to figure out with which column family a memtable is associated. This diff:
- adds an overload to MemTableRepFactory::CreateMemTableRep() that provides the CF ID. For compatibility, its default implementation calls the old overload.
- updates MemTable to create MemTableRep's using the new overload.
Closes https://github.com/facebook/rocksdb/pull/2346
Differential Revision: D5108061
Pulled By: ajkr
fbshipit-source-id: 3a1921214a348dd8ea0f54e1cab3b71c3d46d616
Summary:
Previously sst_file_writer only supports kTypeValue, we need kTypeMerge and kTypeDeletion also as user requested.
Closes https://github.com/facebook/rocksdb/pull/2361
Differential Revision: D5139402
Pulled By: lightmark
fbshipit-source-id: 092a60756d01692539d817a3765ebfd58a8d7f88
Summary:
The default IO priority of WritableFiles is IO_TOTAL, meaning that
they will bypass the rate limiter if it's passed in the options.
This change allows to pass an io priority in construction, so that by
setting IO_LOW or IO_HIGH the rate limit will be honored.
It also fixes a minor bug: SstFileWriter's copy and move constructor
are not disabled and incorrect, as any copy/move will result in a
double free. Switching to unique_ptr makes the object correctly
movable and non-copyable as expected.
Also fix minor style inconsistencies.
Closes https://github.com/facebook/rocksdb/pull/2335
Differential Revision: D5113260
Pulled By: sagar0
fbshipit-source-id: e084236e7ff0b50a56cbeceaa9fedd5e210bf9f8
Summary:
BlockBasedTable::compaction_optimized_ is never used but can cause TSAN warning. Remove it.
Closes https://github.com/facebook/rocksdb/pull/2324
Differential Revision: D5085533
Pulled By: siying
fbshipit-source-id: 2feefce6806d559dfb4ab2989aa3db36752fe25d
Summary:
Consider BlockReadAmpBitmap with bytes_per_bit = 32. Suppose bytes [a, b) were used, while bytes [a-32, a)
and [b+1, b+33) weren't used; more formally, the union of ranges passed to BlockReadAmpBitmap::Mark() contains [a, b) and doesn't intersect with [a-32, a) and [b+1, b+33). Then bits [floor(a/32), ceil(b/32)] will be set, and so the number of useful bytes will be estimated as (ceil(b/32) - floor(a/32)) * 32, which is on average equal to b-a+31.
An extreme example: if we use 1 byte from each block, it'll be counted as 32 bytes from each block.
It's easy to remove this bias by slightly changing the semantics of the bitmap. Currently each bit represents a byte range [i*32, (i+1)*32).
This diff makes each bit represent a single byte: i*32 + X, where X is a random number in [0, 31] generated when bitmap is created. So, e.g., if you read a single byte at random, with probability 31/32 it won't be counted at all, and with probability 1/32 it will be counted as 32 bytes; so, on average it's counted as 1 byte.
*But there is one exception: the last bit will always set with the old way.*
(*) - assuming read_amp_bytes_per_bit = 32.
Closes https://github.com/facebook/rocksdb/pull/2259
Differential Revision: D5035652
Pulled By: lightmark
fbshipit-source-id: bd98b1b9b49fbe61f9e3781d07f624e3cbd92356
Summary:
Based on my experience with linkbench, We should not skip loading bloom filter blocks when they are not available in block cache when using Iterator::Seek
Actually I am not sure why this behavior existed in the first place
Closes https://github.com/facebook/rocksdb/pull/2255
Differential Revision: D5010721
Pulled By: maysamyabandeh
fbshipit-source-id: 0af545a06ac4baeecb248706ec34d009c2480ca4
Summary:
Any non-raw-data dependent object must be destructed before the table
closes. There was a bug of not doing that for filter object. This patch
fixes the bug and adds a unit test to prevent such bugs in future.
Closes https://github.com/facebook/rocksdb/pull/2246
Differential Revision: D5001318
Pulled By: maysamyabandeh
fbshipit-source-id: 6d8772e58765485868094b92964da82ef9730b6d
Summary:
Now if we have iterate_upper_bound set, we continue read until get a key >= upper_bound. For a lot of cases that neighboring data blocks have a user key gap between them, our index key will be a user key in the middle to get a shorter size. For example, if we have blocks:
[a b c d][f g h]
Then the index key for the first block will be 'e'.
then if upper bound is any key between 'd' and 'e', for example, d1, d2, ..., d99999999999, we don't have to read the second block and also know that we have done our iteration by reaching the last key that smaller the upper bound already.
This diff can reduce RA in most cases.
Closes https://github.com/facebook/rocksdb/pull/2239
Differential Revision: D4990693
Pulled By: lightmark
fbshipit-source-id: ab30ea2e3c6edf3fddd5efed3c34fcf7739827ff
Summary:
Some filters such as partitioned filter have pointers to the table for which they are created. Therefore is they are stored in the block cache, the should be forcibly erased from block cache before closing the table, which would result into deleting the object. Otherwise the destructor will be called later when the cache is lazily erasing the object, which having the parent table no longer existent it could result into undefined behavior.
Update: there will be still cases the filter is not removed from the cache since the table has not kept a pointer to the cache handle to be able to forcibly release it later. We make sure that the filter destructor does not access the table pointer to get around such cases.
Closes https://github.com/facebook/rocksdb/pull/2207
Differential Revision: D4941591
Pulled By: maysamyabandeh
fbshipit-source-id: 56fbab2a11cf447e1aa67caa30b58d7bd7ce5bbd
Summary:
With row cache being enabled, table cache is doing a short circuit for reading data. This path needs to be updated to take advantage of pinnable slice. In the meanwhile we disabling pinning in this path.
Closes https://github.com/facebook/rocksdb/pull/2237
Differential Revision: D4982389
Pulled By: maysamyabandeh
fbshipit-source-id: 542630d0cf23cfb1f0c397da82e7053df7966591
Summary:
Replacement of #2147
The change was squashed due to a lot of conflicts.
Closes https://github.com/facebook/rocksdb/pull/2194
Differential Revision: D4929799
Pulled By: siying
fbshipit-source-id: 5cd49c254737a1d5ac13f3c035f128e86524c581
Summary:
prefetch some data from the end of the file for each compaction to reduce IO.
Closes https://github.com/facebook/rocksdb/pull/2149
Differential Revision: D4880576
Pulled By: lightmark
fbshipit-source-id: aa767cd1afc84c541837fbf1ad6c0d45b34d3932
Summary:
This is an effort to club all string related utility functions into one common place, in string_util, so that it is easier for everyone to know what string processing functions are available. Right now they seem to be spread out across multiple modules, like logging and options_helper.
Check the sub-commits for easier reviewing.
Closes https://github.com/facebook/rocksdb/pull/2094
Differential Revision: D4837730
Pulled By: sagar0
fbshipit-source-id: 344278a
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
to void future bug that caused by the mix of userkey/internalkey
Closes https://github.com/facebook/rocksdb/pull/2084
Differential Revision: D4825889
Pulled By: lightmark
fbshipit-source-id: 28411db
Summary:
Allow the users to specify the target index partition size.
With this patch an index partition is cut before its estimated in-memory size goes above the configured value for metadata_block_size. The filter partitions are still cut right after an index partition is cut.
Closes https://github.com/facebook/rocksdb/pull/2041
Differential Revision: D4780216
Pulled By: maysamyabandeh
fbshipit-source-id: 95a0831
Summary:
Fixes#1961 which causes a segfault when filter_policy is nullptr and both
pin_l0_filter_and_index_blocks_in_cache/cache_index_and_filter_blocks
are set.
Closes https://github.com/facebook/rocksdb/pull/2029
Differential Revision: D4764862
Pulled By: maysamyabandeh
fbshipit-source-id: 05bd695
Summary:
need to consistently include "rocksdb/persistent_cache.h" to fix internal build
Closes https://github.com/facebook/rocksdb/pull/2034
Differential Revision: D4768101
Pulled By: ajkr
fbshipit-source-id: 2ecb07f
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
This is the second split of this pull request: https://github.com/facebook/rocksdb/pull/1891 which includes only the builder part. The testing will be included in the third split, where the reader is also included.
Closes https://github.com/facebook/rocksdb/pull/1952
Differential Revision: D4660272
Pulled By: maysamyabandeh
fbshipit-source-id: 36b3cf0
Summary:
This option is needed to be enabled for Direct IO
and I cannot think of a reason where we need to disable it
remove it and default it to true
Closes https://github.com/facebook/rocksdb/pull/1944
Differential Revision: D4641088
Pulled By: IslamAbdelRahman
fbshipit-source-id: d7085b9
Summary:
The assertion in Abandon() fails when called after Finish() fails. Finish() already closes the builder so there's no need to call Abandon().
Closes https://github.com/facebook/rocksdb/pull/1901
Differential Revision: D4601373
Pulled By: ajkr
fbshipit-source-id: e5678be
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
Partition Index blocks and use a Partition-index as a 2nd level index.
The two-level index can be used by setting
BlockBasedTableOptions::kTwoLevelIndexSearch as the index type and
configuring BlockBasedTableOptions::index_per_partition
t15539501
Closes https://github.com/facebook/rocksdb/pull/1814
Differential Revision: D4473535
Pulled By: maysamyabandeh
fbshipit-source-id: bffb87e
Summary:
introduce new methods into a public threadpool interface,
- allow submission of std::functions as they allow greater flexibility.
- add Joining methods to the implementation to join scheduled and submitted jobs with
an option to cancel jobs that did not start executing.
- Remove ugly `#ifdefs` between pthread and std implementation, make it uniform.
- introduce pimpl for a drop in replacement of the implementation
- Introduce rocksdb::port::Thread typedef which is a replacement for std::thread. On Posix Thread defaults as before std::thread.
- Implement WindowsThread that allocates memory in a more controllable manner than windows std::thread with a replaceable implementation.
- should be no functionality changes.
Closes https://github.com/facebook/rocksdb/pull/1823
Differential Revision: D4492902
Pulled By: siying
fbshipit-source-id: c74cb11
Summary:
merger.h was always a confusing name for me, simply give the file a better name
Closes https://github.com/facebook/rocksdb/pull/1836
Differential Revision: D4505357
Pulled By: IslamAbdelRahman
fbshipit-source-id: 07b28d8
Summary:
I added the Cache::Ref() function a couple weeks ago (#1761) to make this feature possible. Like other meta-blocks, rep_->range_del_entry holds a cache handle to pin the range deletion block in uncompressed block cache for the duration of the table reader's lifetime. We can reuse this cache handle to create an iterator over this meta-block without any cache lookup. Ref() is used to increment the cache handle's refcount in case the returned iterator outlives the table reader.
Closes https://github.com/facebook/rocksdb/pull/1801
Differential Revision: D4458782
Pulled By: ajkr
fbshipit-source-id: 2883f10
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
Cleanable objects will perform the registered cleanups when
they are destructed. We however rather to delay this cleaning like when
we are gathering the merge operands. Current approach is to create the
Cleanable object on heap (instead of on stack) and delay deleting it.
By allowing Cleanables to delegate their cleanups to another cleanable
object we can delay the cleaning without however the need to craete the
cleanable object on heap and keeping it around. This patch applies this
technique for the cleanups of BlockIter and shows improved performance
for some in-memory benchmarks:
+1.8% for merge worklaod, +6.4% for non-merge workload when the merge
operator is specified.
https://our.intern.facebook.com/intern/tasks?t=15168163
Non-merge benchmark:
TEST_TMPDIR=/dev/shm/v100nocomp/ ./db_bench --benchmarks=fillrandom
--num=1000000 -value_size=100 -compression_type=none
Reading random with no merge operator specified:
TEST_TMPDIR=/dev/shm/v100nocomp/ ./db_bench
--benchmarks="read
Closes https://github.com/facebook/rocksdb/pull/1711
Differential Revision: D4361163
Pulled By: maysamyabandeh
fbshipit-source-id: 9801e07
Summary:
Add `fadvise_trigger` option to `SstFileWriter`
If fadvise_trigger is passed with a non-zero value, SstFileWriter will invalidate the os page cache every `fadvise_trigger` bytes for the sst file
Closes https://github.com/facebook/rocksdb/pull/1731
Differential Revision: D4371246
Pulled By: IslamAbdelRahman
fbshipit-source-id: 91caff1
Summary:
Improve cache options logging to info log.
Also print the value of
cache_index_and_filter_blocks_with_high_priority.
Closes https://github.com/facebook/rocksdb/pull/1709
Differential Revision: D4358776
Pulled By: yiwu-arbug
fbshipit-source-id: 8f030a0
Summary:
add a new function to SstFileWriter that will tell the user how big is there file right now.
Closes https://github.com/facebook/rocksdb/pull/1686
Differential Revision: D4338868
Pulled By: mdyuki1016
fbshipit-source-id: c1ee16a
Summary:
The gcc-7 code for parsing comments (libcpp/lex.c) didn't match
the intentional fallthough in this comment.
table/block_based_table_builder.cc: In member function 'void rocksdb::BlockBasedTableBuilder::WriteRawBlock(const rocksdb::Slice&, rocksdb::CompressionType, rocksdb::BlockHandle*)':
table/block_based_table_builder.cc:754:22: error: this statement may fall through [-Werror=implicit-fallthrough=]
assert(false);
^
table/block_based_table_builder.cc:756:7: note: here
case kCRC32c: {
^~~~
cc1plus: all warnings being treated as errors
Closes https://github.com/facebook/rocksdb/pull/1661
Differential Revision: D4318817
Pulled By: yiwu-arbug
fbshipit-source-id: e67d171
Summary:
Allow user to explicitly specify that the generated file by SstFileWriter will be ingested in a specific CF.
This allow us to persist the CF id in the generated file
Closes https://github.com/facebook/rocksdb/pull/1615
Differential Revision: D4270422
Pulled By: IslamAbdelRahman
fbshipit-source-id: 7fb954e
Summary:
- Made RangeDelAggregator's InternalKeyComparator member a reference-to-const so we don't need to copy-construct it. Also added InternalKeyComparator to ImmutableCFOptions so we don't need to construct one for each DBIter.
- Made MemTable::NewRangeTombstoneIterator and the table readers' NewRangeTombstoneIterator() functions return nullptr instead of NewEmptyInternalIterator to avoid the allocation. Updated callers accordingly.
Closes https://github.com/facebook/rocksdb/pull/1548
Differential Revision: D4208169
Pulled By: ajkr
fbshipit-source-id: 2fd65cf
Summary:
The Arena construction/destruction introduced significant overhead to read-heavy workload just by creating empty vectors for its blocks, so avoid it in RangeDelAggregator.
Closes https://github.com/facebook/rocksdb/pull/1547
Differential Revision: D4207781
Pulled By: ajkr
fbshipit-source-id: 9d1c130
Summary:
Previously we used TableCache::NewIterator() for multiple purposes (data
block iterator and range deletion iterator), and returned non-ok status in
the data block iterator. In one case where the caller only used the range
deletion block iterator (9e7cf3469b/db/version_set.cc (L965-L973)),
we didn't check/free the data block iterator containing non-ok status, which
caused a valgrind error.
So, this diff decouples creation of data block and range deletion block iterators,
and updates the callers accordingly. Both functions can return non-ok status
in an InternalIterator. Since the non-ok status is returned in an iterator that the
callers will definitely use, it should be more usable/less error-prone.
Closes https://github.com/facebook/rocksdb/pull/1513
Differential Revision: D4181423
Pulled By: ajkr
fbshipit-source-id: 835b8f5
Summary:
If user did not call SstFileWriter::Finish() or called Finish() but it failed.
We need to abandon the builder, to avoid destructing it while it's open
Closes https://github.com/facebook/rocksdb/pull/1502
Differential Revision: D4171660
Pulled By: IslamAbdelRahman
fbshipit-source-id: ab6f434
Summary:
Change DumpTable() so we can see the range deletion meta-block.
Closes https://github.com/facebook/rocksdb/pull/1505
Differential Revision: D4172227
Pulled By: ajkr
fbshipit-source-id: ae35665
Summary:
This handles two issues: (1) range deletion iterator sometimes outlives
the table reader that created it, in which case the block must not be destroyed
during table reader destruction; and (2) we prefer to read these range tombstone
meta-blocks from file fewer times.
- Extracted cache-populating logic from NewDataBlockIterator() into a separate function: MaybeLoadDataBlockToCache()
- Use MaybeLoadDataBlockToCache() to load range deletion meta-block and pin it through the reader's lifetime. This code reuse works since range deletion meta-block has same format as data blocks.
- Use NewDataBlockIterator() to create range deletion iterators, which uses block cache if enabled, otherwise reads the block from file. Either way, the underlying block won't disappear until after the iterator is destroyed.
Closes https://github.com/facebook/rocksdb/pull/1459
Differential Revision: D4123175
Pulled By: ajkr
fbshipit-source-id: 8f64281
Summary:
We can support SST files >2GB but we don't support blocks >2GB
Closes https://github.com/facebook/rocksdb/pull/1465
Differential Revision: D4132140
Pulled By: yiwu-arbug
fbshipit-source-id: 63bf12d
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.
added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456
Differential Revision: D4111271
Pulled By: ajkr
fbshipit-source-id: 6e388d4
Summary:
Changed BuildTable() (used for flush) to (1) add range
tombstones to the aggregator, which is used by CompactionIterator to
determine which keys can be removed; and (2) add aggregator's range
tombstones to the table that is output for the flush.
Closes https://github.com/facebook/rocksdb/pull/1438
Differential Revision: D4100025
Pulled By: ajkr
fbshipit-source-id: cb01a70
Summary: Siying suggested to keep old code for normal mode prev() for safety
Test Plan: make check -j64
Reviewers: yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65439
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.
Test Plan: make all check -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65121
Summary:
reland https://reviews.facebook.net/D62523
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: sdong, yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65211
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
Summary:
1) The previous solution for Prev() prefix support is not clean.
Since I add api SeekForPrev(), now the Prev() can be symmetric to Next().
and we do not need SeekToLast() to be called in Prev() any more.
Also, Next() will Seek(prefix_seek_key_) to solve the problem of possible inconsistency between db_iter and merge_iter when
there is merge_operator. And prefix_seek_key is only refreshed when change direction to forward.
2) This diff also solves the bug of Iterator::SeekToLast() with iterate_upper_bound_ with prefix extractor.
add test cases for the above two cases.
There are some tests for the SeekToLast() in Prev(), I will clean them later.
Test Plan: make all check
Reviewers: IslamAbdelRahman, andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63933
Summary:
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: andrewkr, yhchiang, yiwu, sdong
Reviewed By: sdong
Subscribers: hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62523
Summary:
- Store range tombstones in a separate MemTableRep instantiated with ColumnFamilyOptions::memtable_factory
- MemTable::NewRangeTombstoneIterator() returns a MemTableIterator over the separate MemTableRep
- Part of the read path is not implemented yet (i.e., MemTable::Get())
Test Plan: see unit tests
Reviewers: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62217
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary: EnvPosixTestWithParam.TwoPools relies on explicit sleeping, so it sometimes fail. Fix it.
Test Plan: Run tests with high parallelism many times and make sure the test passes.
Reviewers: yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63417
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63945
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
Summary: Fix two Windows build problems.
Test Plan: Build on Windows and run all Linux tests.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63189
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63177
Summary: basically for SimCache stats. I find most times it is hard to pass Statistics* to SimCache constructor.
Test Plan: make all check
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62193
Summary: not sure why travis complain about this line, works fine on my mac
Test Plan: run on my mac
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63045
Summary:
core dump when run
`./db_stress --max_background_compactions=1 --max_write_buffer_number=3 --sync=0 --reopen=20 --write_buffer_size=33554432 --delpercent=5 --log2_keys_per_lock=10 --block_size=16384 --allow_concurrent_memtable_write=1 --test_batches_snapshots=0 --max_bytes_for_level_base=67108864 --progress_reports=0 --mmap_read=1 --kill_prefix_blacklist=WritableFileWriter::Append,WritableFileWriter::WriteBuffered --writepercent=35 --disable_data_sync=0 --readpercent=50 --subcompactions=3 --ops_per_thread=20000000 --memtablerep=skip_list --prefix_size=0 --target_file_size_multiplier=1 --column_families=1 --db=/dev/shm/rocksdb/rocksdb_crashtest_whitebox --threads=32 --disable_wal=0 --open_files=500000 --destroy_db_initially=0 --target_file_size_base=16777216 --nooverwritepercent=1 --iterpercent=10 --max_key=100000000 --prefixpercent=0 --use_clock_cache=false --kill_random_test=189 --cache_size=1048576 --verify_checksum=1`
Actually the relevant flag is `--threads`, data race when --thread > 1 cause problem.
It is possible that multiple
threads read/write memtable simultaneously. After one thread
calls Prev(), another thread may insert a new key just between
the current key and the key next, which may cause the
assert(current_ == CurrentForward()) failure when the first
thread calls Next() again if in prefix seek mode
Test Plan: rerun db_stress with >1 thread / make all check -j64
Reviewers: sdong, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62979
Summary: As title, make sure Prev() works as expected with Next() when the current iter->key() in the range of the same prefix in prefix seek mode
Test Plan: make all check -j64 (add prefix_test with PrefixSeekModePrev test case)
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61419
Summary:
Add ReadOptions::read_amp_bytes_per_bit option which allow us to create a bitmap for every data block we read
the bitmap will contain (block_size / read_amp_bytes_per_bit) bits.
We will use this bitmap to mark which bytes have been used of the block so we can calculate the read amplification
Test Plan: added new tests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: yiwu, leveldb, march, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58707
Summary:
Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file.
Also add unit tests for that.
Test Plan:
before change:
```
Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from BlockBasedTableTest
[ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter
table/table_test.cc:1421: Failure
Value of: db_iter->Valid()
Actual: false
Expected: true
[ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms)
[----------] 1 test from BlockBasedTableTest (1 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (1 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter
1 FAILED TEST
```
after:
```
Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from BlockBasedTableTest
[ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter
[ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms)
[----------] 1 test from BlockBasedTableTest (0 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (0 ms total)
[ PASSED ] 1 test.
```
Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61215
Summary: fixed data race described in https://github.com/facebook/rocksdb/issues/1267 and add regression test
Test Plan:
./table_test --gtest_filter=BlockBasedTableTest.NewIndexIteratorLeak
make all check -j64
core dump before fix. ok after fix.
Reviewers: andrewkr, sdong
Reviewed By: sdong
Subscribers: igor, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62361
Summary:
Add option to block based table to insert index/filter blocks to block cache with priority. Combined with LRUCache with high_pri_pool_ratio, we can reserved space for index/filter blocks, make them less likely to be evicted.
Depends on D61977.
Test Plan: See unit test.
Reviewers: lightmark, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, march, leveldb
Differential Revision: https://reviews.facebook.net/D62241
Summary: value is not an InternalKey, we do not need to decode it
Test Plan:
setup:
$ ldb put --create_if_missing=true k v
$ ldb put --db=./tmp --create_if_missing k v
$ ldb compact --db=./tmp
before:
$ sst_dump --command=raw --file=./tmp/000004.sst
...
terminate called after throwing an instance of 'std::length_error'
after:
$ ./sst_dump --command=raw --file=./tmp/000004.sst
$ cat tmp/000004_dump.txt
...
ASCII k : v
...
Reviewers: sdong, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62301
Summary: Update SstFileWriter to use user TablePropertiesCollectors that are passed in Options
Test Plan: unittests
Reviewers: sdong
Reviewed By: sdong
Subscribers: jkedgar, andrewkr, hermanlee4, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D62253
Summary: 1. Range Deletion Tombstone structure 2. Modify Add() in table_builder to make it usable for adding range del tombstones 3. Expose NewTombstoneIterator() API in table_reader
Test Plan: table_test.cc (now BlockBasedTableBuilder::Add() only accepts InternalKey. I make table_test only pass InternalKey to BlockBasedTableBuidler. Also test writing/reading range deletion tombstones in table_test )
Reviewers: sdong, IslamAbdelRahman, lightmark, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61473
Summary: Added min/max/avg data block size output to sst_dump. Output was added to the end of BlockBasedTable::DumpDataBlocks, so it appears after the data block details, at the very end of the dump file.
Test Plan:
```
./db_bench --benchmarks=fillrandom
./sst_dump --file=/tmp/rocksdbtest-xyz/dbbench/000007.sst --command=raw
tail -n 6 /tmp/rocksdbtest-xyz/dbbench/000007_dump.txt
```
```
Data Block Summary:
--------------------------------------
# data blocks: 11336
min data block size: 903
max data block size: 2268
avg data block size: 2245.363356
```
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61815
Summary:
This diff include these simple change
- Rename ReleasePinnedIterators to ReleasePinnedData
- Rename PinIteratorIfNeeded to PinIterator
- Use std::vector directly in PinnedIteratorsManager instead of std::unique_ptr<std::vector>
- Generalize PinnedIteratorsManager by adding PinPtr which can pin any pointer
Test Plan: existing tests
Reviewers: sdong, yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61305
Summary:
Experiments on column-aware encodings. Supported features: 1) extract data blocks from SST file and encode with specified encodings; 2) Decode encoded data back into row format; 3) Directly extract data blocks and write in row format (without prefix encoding); 4) Get column distribution statistics for column format; 5) Dump data blocks separated by columns in human-readable format.
There is still on-going work on this diff. More refactoring is necessary.
Test Plan: Wrote tests in `column_aware_encoding_test.cc`. More tests should be added.
Reviewers: sdong
Reviewed By: sdong
Subscribers: arahut, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60027
Summary: In T8216281 we decided to disable prefetching the index and filter during opening table handlers during startup (max_open_files = -1).
Test Plan: Rely on `IndexAndFilterBlocksOfNewTableAddedToCache` to guarantee L0 indexes and filters are still cached and change `PinL0IndexAndFilterBlocksTest` to make sure other levels are not cached (maybe add one more test to test we don't cache other levels?)
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59913
* Added new statistics and refactored to allow ioptions to be passed around as required to access environment and statistics pointers (and, as a convenient side effect, info_log pointer).
* Prevent incrementing compression counter when compression is turned off in options.
* Prevent incrementing compression counter when compression is turned off in options.
* Added two more supported compression types to test code in db_test.cc
* Prevent incrementing compression counter when compression is turned off in options.
* Added new StatsLevel that excludes compression timing.
* Fixed casting error in coding.h
* Fixed CompressionStatsTest for new StatsLevel.
* Removed unused variable that was breaking the Linux build
Summary:
I was investigating performance issues in the SstFileWriter and found all of the following:
- The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function.
- In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key.
- The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator.
- The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value.
- The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function.
- BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over.
- Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on.
- FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time.
- Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append().
Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9.
Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas.
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59607
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
Summary: SstFileWriter ignore Options::bottommost_compression, update it to use bottommost_compression if available
Test Plan:
make check -j64
verified used compression using ./sst_dump
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D59841
Summary:
Right now the way we do BlockIter::Prev() is like this
- Go to the beginning of the restart interval
- Keep moving forward (and decoding keys using ParseNextKey()) until we reach the desired key
This can be optimized by caching the decoded entries in the first pass and reusing them in consecutive BlockIter::Prev() calls
Before caching
```
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readreverse" --db="/dev/shm/bench_prev_opt/" --use_existing_db --disable_auto_compactions
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.413 micros/op 2423972 ops/sec; 268.2 MB/s
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.414 micros/op 2413867 ops/sec; 267.0 MB/s
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.410 micros/op 2440881 ops/sec; 270.0 MB/s
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.414 micros/op 2417298 ops/sec; 267.4 MB/s
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.413 micros/op 2421682 ops/sec; 267.9 MB/s
```
After caching
```
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readreverse" --db="/dev/shm/bench_prev_opt/" --use_existing_db --disable_auto_compactions
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.324 micros/op 3088955 ops/sec; 341.7 MB/s
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.335 micros/op 2980999 ops/sec; 329.8 MB/s
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.341 micros/op 2929681 ops/sec; 324.1 MB/s
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.344 micros/op 2908490 ops/sec; 321.8 MB/s
DB path: [/dev/shm/bench_prev_opt/]
readreverse : 0.338 micros/op 2958404 ops/sec; 327.3 MB/s
```
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D59463
Summary:
We have alot of code duplication whenever we call FullMerge we keep duplicating the instrumentation and statistics code
This is a simple diff to refactor the code to use TimedFullMerge instead of FullMerge
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59577
Summary:
Try to decompress compressed blocks when a special flag is set.
assert and crash in debug builds if we can't decompress the just-compressed input.
Test Plan: Run unit-tests.
Reviewers: dhruba, andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59145
Summary: Currently, if users define both of full key bloom and prefix bloom in SST files. During Get(), if full key bloom shows the key may exist, we still go ahead and check prefix bloom. This is wasteful. If bloom filter for full keys exists, we should always ignore prefix bloom in Get().
Test Plan: Run existing tests
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57825
Summary: With `table_options.cache_index_and_filter_blocks = true`, index and filter blocks are stored in block cache. Then people are curious how much of the block cache total size is used by indexes and bloom filters. It will be nice we have a way to report that. It can help people tune performance and plan for optimized hardware setting. We add several enum values for db Statistics. BLOCK_CACHE_INDEX/FILTER_BYTES_INSERT - BLOCK_CACHE_INDEX/FILTER_BYTES_ERASE = current INDEX/FILTER total block size in bytes.
Test Plan:
write a test case called `DBBlockCacheTest.IndexAndFilterBlocksStats`. The result is:
```
[gzh@dev9927.prn1 ~/local/rocksdb] make db_block_cache_test -j64 && ./db_block_cache_test --gtest_filter=DBBlockCacheTest.IndexAndFilterBlocksStats
Makefile:101: Warning: Compiling in debug mode. Don't use the resulting binary in production
GEN util/build_version.cc
make: `db_block_cache_test' is up to date.
Note: Google Test filter = DBBlockCacheTest.IndexAndFilterBlocksStats
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBBlockCacheTest
[ RUN ] DBBlockCacheTest.IndexAndFilterBlocksStats
[ OK ] DBBlockCacheTest.IndexAndFilterBlocksStats (689 ms)
[----------] 1 test from DBBlockCacheTest (689 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (689 ms total)
[ PASSED ] 1 test.
```
Reviewers: IslamAbdelRahman, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58677
Summary: Deprecate this one option and delete code and tests that are now superfluous.
Test Plan: all tests pass
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: msalib, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55317
Summary:
Added a new abstraction to cache page to RocksDB designed for the read
cache use.
RocksDB current block cache is more of an object cache. For the persistent read cache
project, what we need is a page cache equivalent. This changes adds a cache
abstraction to RocksDB to cache pages called PersistentCache. PersistentCache can cache
uncompressed pages or raw pages (content as in filesystem). The user can
choose to operate PersistentCache either in COMPRESSED or UNCOMPRESSED mode.
Blame Rev:
Test Plan: Run unit tests
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55707
Summary: Store SST file compression algorithm as a TableProperty.
Test Plan: Modified and ran the table_test UT that checks for TableProperties
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: lgalanis, andrewkr, dhruba, IslamAbdelRahman
Differential Revision: https://reviews.facebook.net/D58017
Summary: This is to provide a way for users to skip prefix bloom in point look-up.
Test Plan: Add a new unit test scenario.
Reviewers: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57747
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary:
While trying to reuse PinData() / ReleasePinnedData() .. to optimize away some memcpys I realized that there is a significant overhead for using PinData() / ReleasePinnedData if they were called many times.
This diff refactor the pinning logic by introducing PinnedIteratorsManager a centralized component that will be created once and will be notified whenever we need to Pin an Iterator. This implementation have much less overhead than the original implementation
Test Plan:
make check -j64
COMPILE_WITH_ASAN=1 make check -j64
Reviewers: yhchiang, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56493
Summary:
This is the original diff that I have landed and reverted and now I want to land again https://reviews.facebook.net/D34269
For old SST files we will show
```
comparator name: N/A
merge operator name: N/A
property collectors names: N/A
```
For new SST files with no merge operator name and with no property collectors
```
comparator name: leveldb.BytewiseComparator
merge operator name: nullptr
property collectors names: []
```
for new SST files with these properties
```
comparator name: leveldb.BytewiseComparator
merge operator name: UInt64AddOperator
property collectors names: [DummyPropertiesCollector1,DummyPropertiesCollector2]
```
Test Plan: unittests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56487
Comparable with Snappy on comp ratio.
Implemented using Windows API, does not require external package.
Avaiable since Windows 8 and server 2012.
Use -DXPRESS=1 with CMake to enable.
Summary:
In the case where we can't find a filter block, there is not much benefit of doing the binary search and see whether the index key has the prefix. With the change, we blindly return true if we can't get the filter.
It also fixes missing row cases for reverse comparator with full bloom.
Test Plan: Add a test case that used to fail.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: kradhakrishnan, yiwu, hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56697
Summary:
Full block checking should be a good enough indication of prefix existance. No need to further check data block.
This also fixes wrong results when using prefix bloom and reverse bitwise comparator.
Test Plan: Will add a unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: hermanlee4, yoshinorim, yiwu, kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56625
Summary: PrefixTest.PrefixAndWholeKeyTest runs against the same directory as prefix_test, which sometimes fail parallel tests. Fix it.
Test Plan: Run it in parallel and see it doesn't fail anymore.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56541
Summary: Cache shard bit 4 is sometimes too small and 6 is a more common value picked by users. Make that default. It shouldn't hurt much to change options.max_file_opening_threads default to be 16, which will reduce the worst case DB open time.
Test Plan: Run all existing tests.
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, igor, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55047
Summary:
Added the column family name to the properties block. This property
is omitted only if the property is unavailable, such as when RepairDB()
writes SST files.
In a next diff, I will change RepairDB to use this new property for
deciding to which column family an existing SST file belongs. If this
property is missing, it will add it to the "unknown" column family (same
as its existing behavior).
Test Plan:
New unit test:
$ ./db_table_properties_test --gtest_filter=DBTablePropertiesTest.GetColumnFamilyNameProperty
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55605
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
Summary:
Expose the inverse of ToString(hex=true) on Slice: Slice::DecodeHex
Refactor the other implementation of to/from hex in ldb_cmd.h to use the Slice
version
(Difference between the 2 is whether 0x is expected/produced in front of the hex
string or not)
Eliminated support for invalid odd length hex string - this is now invalid
instead of having 1/2 byte set
Added (inverse of HexToString) test for LDBCommand::StringToHex which also
indirectly tests Slice::ToString(true)
After moving the original implementation from ldb_cmd.h, updated it to much simpler/efficient version
(originally/inspired from https://github.com/facebook/wdt/blob/master/util/EncryptionUtils.cpp#L140-L169 )
Test Plan: run tests
Reviewers: uddipta, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56121
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary:
In block based table reader, wow we put index reader to block cache, which can be retrieved after DB restart. However, index reader may reference internal comparator, which can be destroyed after DB restarts, causing problems.
Fix it by making cache key identical per table reader.
Test Plan: Add a new test which failed with out the commit but now pass.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: maro, yhchiang, kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55287
Summary:
Cache to have an option to fail Cache::Insert() when full. Update call sites to check status and handle error.
I totally have no idea what's correct behavior of all the call sites when they encounter error. Please let me know if you see something wrong or more unit test is needed.
Test Plan: make check -j32, see tests pass.
Reviewers: anthony, yhchiang, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54705
Summary: We want to provide a way to detect whether an iterator is stale and needs to be recreated. Add a iterator property to return version number.
Test Plan: Add two unit tests for it.
Reviewers: IslamAbdelRahman, yhchiang, anthony, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54921
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator
Test Plan: Rerun existing tests and add a negative test case.
Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54783
Summary:
This reverts commit 73c31377bb, which mistakenly
reverts 73c31377bb that fixes a bug when both
whole_key_filtering and prefix_extractor are set
Test Plan: revert the patch
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52707
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary: Add a new option to BlockBasedTableOptions that will allow us to change the restart interval for the index block
Test Plan: unit tests
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: march, dhruba
Differential Revision: https://reviews.facebook.net/D53721
Summary: Similar to D53385 we need to check InDomain before checking the filter block.
Test Plan: unit tests
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53421
Summary:
Right now when we are creating a BlockBasedTable with fill filter block
we add to the filter all the prefixes that are InDomain() based on the prefix_extractor
the problem is that when we read a key from the file, we check the filter block for the prefix whether or not it's InDomain()
Test Plan: unit tests
Reviewers: yhchiang, rven, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53385
Summary:
SstFileWriter may create an sst file with no entries
Right now this will fail when being ingested using DB::AddFile() saying that the keys are corrupted
Test Plan: make check
Reviewers: yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52815
Summary:
After introducing Iterator::PinData(), we have extra overhead of deleting the pinned iterators that we track in a std::set
This patch avoid inserting to the std::set if we have only one iterator (normal use case when no iterators are pinned)
Before this change
```
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="newiterator" --db="/tmp/rocksdbtest-8616/dbbench" --use_existing_db --disable_auto_compactions
newiterator : 1.006 micros/op 994013 ops/sec;
newiterator : 0.994 micros/op 1006295 ops/sec;
newiterator : 0.990 micros/op 1010422 ops/sec;
```
After change
```
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="newiterator" --db="/tmp/rocksdbtest-8616/dbbench" --use_existing_db --disable_auto_compactions
newiterator : 0.754 micros/op 1326588 ops/sec;
newiterator : 0.759 micros/op 1317394 ops/sec;
newiterator : 0.691 micros/op 1446704 ops/sec;
```
Test Plan: make check -j64
Reviewers: yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52761
Summary: <array> is not included in table/plain_table_key_coding.h. It may be the cause of one CLANG build failure.
Test Plan: Build it
Reviewers: yhchiang, rven, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52725
Summary: In plain table reader's non-mmap mode, we only keep the most recent read buffer. However, for binary search, it is likely we come back to a location to read. To avoid one pread in such a case, we keep two read buffers. It should cover most of the cases.
Test Plan:
1. run tests
2. check the optimization works through strace when running
./table_reader_bench -mmap_read=false --num_keys2=1 -num_keys1=5000 -table_factory=plain_table --iterator --through_db
Reviewers: anthony, rven, kradhakrishnan, igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51171
Summary:
table_test is failing because we are creating a temp InternalComparator
14:27:28 [ RUN ] BlockBasedTableTest.NoopTransformSeek
14:27:28 pure virtual method called
14:27:28 terminate called without an active exception
14:27:28 /bin/sh: line 7: 2346261 Aborted (core dumped) ./$t
Test Plan: make table_test -j64 && ./table_test --gtest_filter="BlockBasedTableTest.NoopTransformSeek"
Reviewers: igor, sdong, anthony, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52671
Summary:
This patch reverts commit 57605d7ef3 as it will
cause BlockBasedTableTest.NoopTransformSeek test crashes in some environment.
Test Plan: revert the patch
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52623
Summary:
When both whole_key_filtering and prefix_extractor are set, RocksDB will
mistakenly encode prefix + whole key into the database instead of
simply whole key when BlockBasedTable is used. This patch fixes this bug.
Test Plan: Add a test in table_test
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52233
Summary: DBImpl::GetLatestSequenceForKey() can do memcpy's to load a value that will never be used. This can be optimized by changing all the Get() functions called to optionally not fetch the value (and only fetch the sequencenumber).
Test Plan: optimistic_transaction_test and transaction_test
Reviewers: anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D52227
PrefixMayMatch previously seeked in the prefix index using an internal
key with a sequence number of 0. This would cause the prefix index seek
to fall off the end if the last key in the index had a user-key greater
than or equal to the key being looked for. Falling off the end of the
index in turn results in PrefixMayMatch returning false if the index is
in memory.
Summary: If block_restart_interval gets set to less than 1 an assert will be triggered in BlockBuilder::BlockBuilder(). This prevents the user from doing this by silently setting any value less than 1 to 1.
Test Plan: Added a test (in BlockBasedTableTest in table_test) that checks invalid values to make sure that they are reset to the expected values. The block_restart_interval value is checked along with block_size_deviation which also silently sets the value if it is outside a specific range.
Reviewers: yoshinorim, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52509
Summary:
myrocks seems to build rocksdb using
-Wmissing-field-initializers (and treats warnings as errors). This diff
adds that flag to the rocksdb build, and fixes the compilation failures
that result. I have not checked for any other differences in the build
flags for rocksdb build as part of myrocks.
Test Plan: make check
Reviewers: sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52443
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
Summary:
I added this line in my previous patch D48999 (which is incorrect)
We should not release the iterator since releasing it will evict the blocks from cache
Test Plan:
Run the test under valgrind
make check
Reviewers: rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52161
Summary:
This patch update the Iterator API to introduce new functions that allow users to keep the Slices returned by key() valid as long as the Iterator is not deleted
ReadOptions::pin_data : If true keep loaded blocks in memory as long as the iterator is not deleted
Iterator::IsKeyPinned() : If true, this mean that the Slice returned by key() is valid as long as the iterator is not deleted
Also add a new option BlockBasedTableOptions::use_delta_encoding to allow users to disable delta_encoding if needed.
Benchmark results (using https://phabricator.fb.com/P20083553)
```
// $ du -h /home/tec/local/normal.4K.Snappy/db10077
// 6.1G /home/tec/local/normal.4K.Snappy/db10077
// $ du -h /home/tec/local/zero.8K.LZ4/db10077
// 6.4G /home/tec/local/zero.8K.LZ4/db10077
// Benchmarks for shard db10077
// _build/opt/rocks/benchmark/rocks_copy_benchmark \
// --normal_db_path="/home/tec/local/normal.4K.Snappy/db10077" \
// --zero_db_path="/home/tec/local/zero.8K.LZ4/db10077"
// First run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s
// ============================================================================
// BM_StringCopy 1.73s 576.97m
// BM_StringPiece 103.74% 1.67s 598.55m
// ============================================================================
// Match rate : 1000000 / 1000000
// Second run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s
// ============================================================================
// BM_StringCopy 611.99ms 1.63
// BM_StringPiece 203.76% 300.35ms 3.33
// ============================================================================
// Match rate : 1000000 / 1000000
```
Test Plan: Unit tests
Reviewers: sdong, igor, anthony, yhchiang, rven
Reviewed By: rven
Subscribers: dhruba, lovro, adsharma
Differential Revision: https://reviews.facebook.net/D48999
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary: In non-mmap mode, plain table reader can issue two pread() for index checking and reading the actual data, although it's for the same location. By reusing the key decoder, we reuse the buffer used for the two to avoid it.
Test Plan: Run unit tests. Run table_reader_bench and see from strace the repeat read cases to disappear.
Reviewers: anthony, yhchiang, rven, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50949
Summary:
The commit of option helper refactor broken the build:
(1) a git merge problem
(2) some uncaught compiler warning
Fix it.
Test Plan: Make sure "make all" passes
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50943
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
Summary:
Reverting https://reviews.facebook.net/D34269 for now
after I landed it a flaky test started continuously failing, I am almost sure this patch is not related to the test but I will revert it until I figure out why it's failing
Test Plan: make check
Reviewers: kradhakrishnan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50385
Enable C4307 'operator' : integral constant overflow
Longs and ints on Windows are 32-bit hence the overflow
Enable C4309 'conversion' : truncation of constant value
Enable C4512 'class' : assignment operator could not be generated
Enable C4701 Potentially uninitialized local variable 'name' used
Summary:
This diff introduce new table properties that will be written for block based tables
These properties are
- comparator name
- merge operator name
- property collectors names
Test Plan:
- Added a new unit test to verify that these tests are written/read correctly
- Running all other tests right now (wont land until all tests finish)
Reviewers: rven, kradhakrishnan, igor, sdong, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34269
On Windows two tests fail that use MockTable:
flush_job_test and compaction_job_test with the following message:
compaction_job_test_je.exe : Assertion failed: result.size() == 4,
file c:\dev\rocksdb\rocksdb\table\mock_table.cc, line 110
Investigation reveals that this failure occurs when a 4 byte
ID written to a beginning of the physically open file (main
contents remains in a in-memory map) can not be read back.
The reason for the failure is that the ID is written directly
to a WritableFile bypassing WritableFileWriter. The side effect of that
is that pending_sync_ never becomes true so the file is never flushed,
however, the direct cause of the failure is that the filesize_ member
of the WritableFileWriter remains zero. At Close() the file is truncated
to that size and the file becomes empty so the ID can not be read back.
Summary:
We are cleaning up dependencies.
This diff takes a first step at moving memtable files to their own
directory called memtable. In future diffs, we will move other memtable
files from db to memtable.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48915
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary:
Fix tests that compile under ROCKSDB_LITE but currently failing.
table_test:
RandomizedLongDB test is using internal stats which is not supported in ROCKSDB_LITE
compaction_job_test:
Using CompactionJobStats which is not supported
perf_context_test:
KeyComparisonCount test try to open DB in ReadOnly mode which is not supported
Test Plan: run the tests under ROCKSDB_LITE
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48585
Summary: It would be nice to have and access to table properties in compaction callbacks. In MyRocks project, it will make possible to update optimizer statistics online.
Test Plan: ran the unit test. Ran myrocks with the new way of collecting stats.
Reviewers: igor, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48267
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary: Add 2 new counters BLOCK_CACHE_BYTES_WRITE, BLOCK_CACHE_BYTES_READ to keep track of how many bytes were written to the cache and how many bytes that we read from cache
Test Plan: make check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48195
Summary:
hit and miss bloom filter stats for memtable and SST
stats added to perf_context struct
key matches and prefix matches combined into one stat
Test Plan: unit test veryfing the functionality added, see BloomStatsTest in db_test.cc for details
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47859
Summary:
Since Andres' internship is over, I took over https://reviews.facebook.net/D42555 and rebased and simplified it a bit.
The behavior in this diff is a bit simpler than in D42555:
* only merge operators are passed through FilterMergeValue(). If fitler function returns true, the merge operator is ignored
* compaction filter is *not* called on: 1) results of merge operations and 2) base values that are getting merged with merge operands (the second case was also true in previous diff)
Do we also need a compaction filter to get called on merge results?
Test Plan: make && make check
Reviewers: lovro, tnovak, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: noetzli, kolmike, leveldb, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D47847
Summary: Recent patch introduced a bug that if non-mmap mode is used, in prefix encoding case, there is a resizing of cur_key_ within the same prefix, we still read prefix from the released buffer. It fails ASAN tests and this commit fixes it.
Test Plan: Run the ASAN tests for the failing test case.
Reviewers: IslamAbdelRahman, yhchiang, anthony, igor, kradhakrishnan, rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D47457
Summary:
This is an initial version of bulk load feature
This diff allow us to create sst files, and then bulk load them later, right now the restrictions for loading an sst file are
(1) Memtables are empty
(2) Added sst files have sequence number = 0, and existing values in database have sequence number = 0
(3) Added sst files values are not overlapping
Test Plan: unit testing
Reviewers: igor, ott, sdong
Reviewed By: sdong
Subscribers: leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D39081
Summary:
PlainTableReader now only allows mmap-mode. Add the support to non-mmap mode for more flexibility.
Refactor the codes to move all logic of reading data to PlainTableKeyDecoder, and consolidate the calls to Read() call and ReadVarint32() call. Implement the calls for both of mmap and non-mmap case seperately. For non-mmap mode, make copy of keys in several places when we need to move the buffer after reading the keys.
Test Plan: Add the mode of non-mmap case in plain_table_db_test. Run it in valgrind mode too.
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D47187
Summary: RandomAccessFileReader unnecessarily inherited RandomAccessFile, which can introduce unnecessarily extra costs. Remove it.
Test Plan: Run all existing tests
Reviewers: yhchiang, anthony, igor, kradhakrishnan, rven, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D47409
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary: Missed one file in the previous commit
Test Plan: compiles
Reviewers: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47055
Summary:
Refactoring NewTableReader to accept TableReaderOptions
This will make it easier to add new options in the future, for example in this diff https://reviews.facebook.net/D46071
Test Plan: run existing tests
Reviewers: igor, yhchiang, anthony, rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D46179
Summary:
In some cases, equality comparisons can be done more efficiently than three-way
comparisons. There are quite a few places in the code where we only care about
equality. This patch adds an Equal() method that defaults to using the
Compare() method.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, igor, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46233
Summary:
This optimizes the case when (cache_index_and_filter_blocks=1) and bloom filter is not present in the cache.
Previously we did:
1. Read meta block from file
2. Read the filter position from the meta block
3. Read the filter
Now, we pre-load the filter position on Table::Open(), so we can skip steps (1) and (2) on bloom filter cache miss. Instead of 2 IOs, we do only 1.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46047
Summary:
This diff is a collection of cleanups that were initially part of D43179.
Additionally it adds a unified way of defining key-value maps that use a
Comparator for sorting (this was previously implemented in four different
places).
Test Plan: make clean check all
Reviewers: rven, anthony, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45993
Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary:
This patch adds "rocksdb.aggregated-table-properties"
and "rocksdb.aggregated-table-properties-at-levelN", the former
returns the aggreated table properties of a column family,
while the later returns the aggregated table properties
of the specified level N.
Test Plan: Added tests in db_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45087
Summary: Add more test cases of data race causing wrong iterating results. Tag tests not passing as DISABLED_
Test Plan: Run the tests
Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: tnovak, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44907
Summary: Iterator has a bug: if a child iterator reaches its end, and user issues a Prev(), and just before SeekToLast() of the child iterator is called, some extra rows is added in the end, the position of iterator can be misplaced.
Test Plan: Run the tests with or without valgrind
Reviewers: rven, yhchiang, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: tnovak, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43671
Summary:
Changed compaction_job_test to support better/more thorough
tests and added two tests. Also changed MockFileContents
to order using InternalKeyComparator.
Test Plan: make compaction_job_test && ./compaction_job_test; make all && make check
Reviewers: sdong, rven, igor, yhchiang, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42837
Summary:
While working on https://reviews.facebook.net/D43179 , I found
duplicate code in the tests. This patch removes it.
Test Plan: make clean all check
Reviewers: igor, sdong, rven, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43263
Summary: Add new CheckFileExists method. Considered changing the FileExists api but didn't want to break anyone's builds.
Test Plan: unit tests
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42003
Summary: Remove plain table tests from table_test since plain table is not supported in ROCKSDB_LITE
Test Plan: table_test
Reviewers: igor, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42153
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
MergeUntil was not reporting a success when merging an operand with
a Value/Deletion despite the comments in MergeHelper and CompactionJob
indicating otherwise. This lead to operands being written to the compaction
output unnecessarily:
M1 M2 M3 P M4 M5 --> (P+M1+M2+M3) M2 M3 M4 M5 (before the diff)
M1 M2 M3 P M4 M5 --> (P+M1+M2+M3) M4 M5 (after the diff)
In addition, the code handling Values/Deletion was basically identical.
This patch unifies the code. Finally, this patch also adds testing for
merge_helper.
Test Plan: make && make check
Reviewers: sdong, rven, yhchiang, tnovak, igor
Reviewed By: igor
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42351
- Remove make file defines from public headers and use _WIN32 because it is compiler defined
- use __GNUC__ and __clang__ to guard non-portable attributes
- add #include "port/port.h" to some new .cc files.
- minor changes in CMakeLists to reflect recent changes
Summary: This helps Windows port to format their changes, as discussed. Might have formatted some other codes too becasue last 10 commits include more.
Test Plan: Build it.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41961
Summary:
Public API depends on port/port.h which is wrong. Fix it.
Also with gcc 4.8.1 build was broken as MAX_INT32 was not recognized. Fix it by using ::max in linux.
Test Plan: Build it and try to build an external project on top of it.
Reviewers: anthony, yhchiang, kradhakrishnan, igor
Reviewed By: igor
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41745
Summary: Add a perf context counter to help users figure out time spent on reading indexes and bloom filter blocks.
Test Plan: Will write a unit test
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41433
Summary:
Remove assert(current_ == CurrentReverse()) in MergingIterator::Prev()
because it is possible to have some keys larger than the seek-key
inserted between Seek() and SeekToLast(), which makes current_ not
equal to CurrentReverse().
Test Plan: db_stress
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41331
Summary:
This diff reverts the following two previous diffs related to
DBIter::FindPrevUserKey(), which makes db_stress unstable.
We should bake a better fix for this.
* "Fix a comparison in DBIter::FindPrevUserKey()"
ec70fea4c4.
* "Fixed endless loop in DBIter::FindPrevUserKey()"
acee2b08a2.
Test Plan: db_stress
Reviewers: anthony, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41301
Summary:
While profiling compaction in our service I noticed a lot of CPU (~15% of compaction) being spent in MergingIterator and key comparison. Looking at the code I found MergingIterator was (understandably) using std::priority_queue for the multiway merge.
Keys in our dataset include sequence numbers that increase with time. Adjacent keys in an L0 file are very likely to be adjacent in the full database. Consequently, compaction will often pick a chunk of rows from the same L0 file before switching to another one. It would be great to avoid the O(log K) operation per row while compacting.
This diff replaces std::priority_queue with a custom binary heap implementation. It has a "replace top" operation that is cheap when the new top is the same as the old one (i.e. the priority of the top entry is decreased but it still stays on top).
Test Plan:
make check
To test the effect on performance, I generated databases with data patterns that mimic what I describe in the summary (rows have a mostly increasing sequence number). I see a 10-15% CPU decrease for compaction (and a matching throughput improvement on tmpfs). The exact improvement depends on the number of L0 files and the amount of locality. Performance on randomly distributed keys seems on par with the old code.
Reviewers: kailiu, sdong, igor
Reviewed By: igor
Subscribers: yoshinorim, dhruba, tnovak
Differential Revision: https://reviews.facebook.net/D29133
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary: Try to allocate LevelFileIteratorState and LevelFileNumIterator from DB iterator's arena, instead of calling malloc and free.
Test Plan: valgrind check
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40929
Summary:
Currently, when we insert something into block cache, we say that the block cache capacity decreased by the size of the block. However, size of the block might be less than the actual memory used by this object. For example, 4.5KB block will actually use 8KB of memory. So even if we configure block cache to 10GB, our actually memory usage of block cache will be 20GB!
This problem showed up a lot in testing and just recently also showed up in MongoRocks production where we were using 30GB more memory than expected.
This diff will fix the problem. Instead of counting the block size, we will count memory used by the block. That way, a block cache configured to be 10GB will actually use only 10GB of memory.
I'm using non-portable function and I couldn't find info on portability on Google. However, it seems to work on Linux, which will cover majority of our use-cases.
Test Plan:
1. fill up mongo instance with 80GB of data
2. restart mongo with block cache size configured to 10GB
3. do a table scan in mongo
4. memory usage before the diff: 12GB. memory usage after the diff: 10.5GB
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40635
Summary:
Implementation of a table-level row cache.
It only caches point queries done through the `DB::Get` interface, queries done through the `Iterator` interface will completely skip the cache.
Supports snapshots and merge operations.
Test Plan: Ran `make valgrind_check commit-prereq`
Reviewers: igor, philipp, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39849
Summary:
It is experimental. Allow users to return from a call back function TablePropertiesCollector::NeedCompact(), based on the data in the file.
It can be used to allow users to suggest DB to clear up delete tombstones faster.
Test Plan: Add a unit test.
Reviewers: igor, yhchiang, kradhakrishnan, rven
Reviewed By: rven
Subscribers: yoshinorim, MarkCallaghan, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39585
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary:
Make it build for CYGWIN.
Need to define "-std=gnu++11" instead of "-std=c++11" and use some replacement functions.
Test Plan: Build it and run some unit tests in CYGWIN
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37605
Summary:
Allow users to give a callback function with parameter using sync point, so more complicated verification can be done in tests.
Use it in DBTest.DynamicLevelCompressionPerLevel2 so that failures will be more easy to debug.
Test Plan: Run all tests. Run DBTest.DynamicLevelCompressionPerLevel2 with valgrind check.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36999
Summary: Now we add warnings when user configures compression and the compression is not supported.
Test Plan:
Configured compression to non-supported values. Observed messages in my log:
2015/03/26-12:17:57.586341 7ffb8a496840 [WARN] Compression type chosen for level 2 is not supported: LZ4. RocksDB will not compress data on level 2.
2015/03/26-12:19:10.768045 7f36f15c5840 [WARN] Compression type chosen is not supported: LZ4. RocksDB will not compress data.
Reviewers: rven, sdong, yhchiang
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35979
Summary:
Fix build break on travis build:
$ OPT=-DTRAVIS V=1 make unity && make clean && OPT=-DTRAVIS V=1 make db_test && ./db_test
......
In file included from unity.cc:65:0:
./table/plain_table_key_coding.cc: In member function ‘rocksdb::Status rocksdb::PlainTableKeyDecoder::NextPrefixEncodingKey(const char*, const char*, rocksdb::ParsedInternalKey*, rocksdb::Slice*, size_t*, bool*)’:
./table/plain_table_key_coding.cc:224:3: error: reference to ‘EntryType’ is ambiguous
EntryType entry_type;
^
In file included from ./db/table_properties_collector.h:9:0,
from ./db/builder.h:11,
from ./db/builder.cc:10,
from unity.cc:1:
./include/rocksdb/table_properties.h:81:6: note: candidates are: enum rocksdb::EntryType
enum EntryType {
^
In file included from unity.cc:65:0:
./table/plain_table_key_coding.cc:16:6: note: enum rocksdb::{anonymous}::EntryType
enum EntryType : unsigned char {
^
./table/plain_table_key_coding.cc:231:51: error: ‘entry_type’ was not declared in this scope
const char* pos = DecodeSize(key_ptr, limit, &entry_type, &size);
^
make: *** [unity.o] Error 1
Test Plan:
OPT=-DTRAVIS V=1 make unity
And make sure it doesn't break anymore.
Reviewers: yhchiang, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36549
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
Summary: Fixing issues with get context function.
Test Plan: Run make commit-prereq
Reviewers: sdong, meyering, yhchiang
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35853
Summary:
We have addded new stats and perf_context for measuring the merge and filter operation time consumption.
We have bounded all the merge operations within the GUARD statment and collected the total time for these operations in the DB.
Test Plan: WIP
Reviewers: rven, yhchiang, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34377
Summary:
Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different.
In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest.
There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides.
```lang=bash
% cat ~/transform
#!/bin/sh
files=$(git ls-files '*test\.cc')
for file in $files
do
if grep -q "rocksdb::test::RunAllTests()" $file
then
if grep -Eq '^class \w+Test {' $file
then
perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file
perl -pi -e 's/^(TEST)/${1}_F/g' $file
fi
perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file
perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file
fi
done
% sh ~/transform
% make format
```
Second iteration of this diff contains only scripted changes.
Third iteration contains manual changes to fix last errors and make it compilable.
Test Plan:
Build and notice no errors.
```lang=bash
% USE_CLANG=1 make check -j55
```
Tests are still testing.
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35157
Summary:
gtest does not use exceptions to fail a unit test by design, and `ASSERT*`s are implemented using `return`. As a consequence we cannot use `ASSERT*` in a function that does not return `void` value ([[ https://code.google.com/p/googletest/wiki/AdvancedGuide#Assertion_Placement | 1]]), and have to fix our existing code. This diff does this in a generic way, with no manual changes.
In order to detect all existing `ASSERT*` that are used in functions that doesn't return void value, I change the code to generate compile errors for such cases.
In `util/testharness.h` I defined `EXPECT*` assertions, the same way as `ASSERT*`, and redefined `ASSERT*` to return `void`. Then executed:
```lang=bash
% USE_CLANG=1 make all -j55 -k 2> build.log
% perl -naF: -e 'print "-- -number=".$F[1]." ".$F[0]."\n" if /: error:/' \
build.log | xargs -L 1 perl -spi -e 's/ASSERT/EXPECT/g if $. == $number'
% make format
```
After that I reverted back change to `ASSERT*` in `util/testharness.h`. But preserved introduced `EXPECT*`, which is the same as `ASSERT*`. This will be deleted once switched to gtest.
This diff is independent and contains manual changes only in `util/testharness.h`.
Test Plan:
Make sure all tests are passing.
```lang=bash
% USE_CLANG=1 make check
```
Reviewers: igor, lgalanis, sdong, yufei.zhu, rven, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33333
Summary: These changes are necessary to make tests look more generic, and avoid feature conflicts with gtest.
Test Plan:
Make sure no build errors, and all test are passing.
```
% make check
```
Reviewers: igor, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35145
Summary:
Change the way options.compression_per_level is used when options.level_compaction_dynamic_level_bytes=true so that options.compression_per_level[1] determines compression for the level L0 is merged to, options.compression_per_level[2] to the level after that, etc.
Test Plan: run all tests
Reviewers: rven, yhchiang, kradhakrishnan, igor
Reviewed By: igor
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D34431
Summary:
Pre-fetching is a common operation performed by data stores for
disk/flash based systems as part of database startup.
This is part of task 5197184.
Test Plan: Run the newly added unit test
Reviewers: rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33933
Summary:
Summary:
Added a new option to ColumnFamllyOptions - optimize_filters_for_hits. This option can be used in the case where most
accesses to the store are key hits and we dont need to optimize performance for key misses.
This is useful when you have a very large database and most of your lookups succeed. The option allows the store to
not store and use filters in the last level (the largest level which contains data). These filters can take a large amount of
space for large databases (in memory and on-disk). For the last level, these filters are only useful for key misses and not
for key hits. If we are not optimizing for key misses, we can choose to not store these filters for that level.
This option is only provided for BlockBasedTable. We skip the filters when we are compacting
Test Plan:
1. Modified db_test toalso run tests with an additonal option (skip_filters_on_last_level)
2. Added another unit test to db_test which specifically tests that filters are being skipped
Reviewers: rven, igor, sdong
Reviewed By: sdong
Subscribers: lgalanis, yoshinorim, MarkCallaghan, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33717
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary:
BlockBasedTable pre-fetches the filter and index blocks on Open call.
This is an optimistic optimization targeted for runtime scenario. The
optimization is unnecessary for sst_dump_tool
- Added a provision to disable pre-fetching of index and filter blocks
in BlockBasedTable
- Disabled pre-fetching for the sst_dump tool
Stack for reference :
#01 0x00000000005ed944 in snappy::InternalUncompress<snappy::SnappyArrayWriter> () from /home/engshare/third-party2/snappy/1.0.3/src/snappy-1.0.3/snappy.cc:148
#02 0x00000000005edeee in snappy::RawUncompress () from /home/engshare/third-party2/snappy/1.0.3/src/snappy-1.0.3/snappy.cc:947
#03 0x00000000004e0b4d in rocksdb::UncompressBlockContents () from /data/users/paultuckfield/rocksdb/./util/compression.h:69
#04 0x00000000004e145c in rocksdb::ReadBlockContents () from /data/users/paultuckfield/rocksdb/table/format.cc:334
#05 0x00000000004ca424 in rocksdb::(anonymous namespace)::ReadBlockFromFile () from /data/users/paultuckfield/rocksdb/table/block_based_table_reader.cc:70
#06 0x00000000004cccad in rocksdb::BlockBasedTable::CreateIndexReader () from /data/users/paultuckfield/rocksdb/table/block_based_table_reader.cc:173
#07 0x00000000004d17e5 in rocksdb::BlockBasedTable::Open () from /data/users/paultuckfield/rocksdb/table/block_based_table_reader.cc:553
#08 0x00000000004c8184 in rocksdb::BlockBasedTableFactory::NewTableReader () from /data/users/paultuckfield/rocksdb/table/block_based_table_factory.cc:51
#09 0x0000000000598463 in rocksdb::SstFileReader::NewTableReader () from /data/users/paultuckfield/rocksdb/util/sst_dump_tool.cc:69
#10 0x00000000005986c2 in rocksdb::SstFileReader::SstFileReader () from /data/users/paultuckfield/rocksdb/util/sst_dump_tool.cc:26
#11 0x0000000000599047 in rocksdb::SSTDumpTool::Run () from /data/users/paultuckfield/rocksdb/util/sst_dump_tool.cc:332
#12 0x0000000000409b06 in main () from /data/users/paultuckfield/rocksdb/tools/sst_dump.cc:12
Test Plan:
- Added a unit test to trigger the code.
- Also did some manual verification.
- Passed all unit tests
task #6296048
Reviewers: igor, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34041
Summary:
This diff contains trivial fixes for 6 scan-build warnings:
**db/c_test.c**
`db` variable is never read. Removed assignment.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9b77d2.html#EndPath
**db/db_iter.cc**
`skipping` local variable is assigned to false. Then in the next switch block the only "non return" case assign `skipping` to true, the rest cases don't use it and all do return.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-13fca7.html#EndPath
**db/log_reader.cc**
In `bool Reader::SkipToInitialBlock()` `offset_in_block` local variable is assigned to 0 `if (offset_in_block > kBlockSize - 6)` and then never used. Removed the assignment and renamed it to `initial_offset_in_block` to avoid confusion.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-a618dd.html#EndPath
In `bool Reader::ReadRecord(Slice* record, std::string* scratch)` local variable `in_fragmented_record` in switch case `kFullType` block is assigned to false and then does `return` without use. In the other switch case `kFirstType` block the same `in_fragmented_record` is assigned to false, but later assigned to true without prior use. Removed assignment for both cases.
scan-build reprots:
http://home.fburl.com/~sugak/latest20/report-bb86b0.html#EndPathhttp://home.fburl.com/~sugak/latest20/report-a975be.html#EndPath
**table/plain_table_key_coding.cc**
Local variable `user_key_size` is assigned when declared. But then in both places where it is used assigned to `static_cast<uint32_t>(key.size() - 8)`. Changed to initialize the variable to the proper value in declaration.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9e6b86.html#EndPath
**tools/db_stress.cc**
Missing `break` in switch case block. This seems to be a bug. Added missing `break`.
Test Plan:
Make sure all tests are passing and scan-build does not report 'Dead assignment' and 'Dead initialization' bugs.
```lang=bash
% make check
% make analyze
```
Reviewers: meyering, igor, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33795
Summary:
Adding -W and -Wextra to CXXFLAGS provoked this failure:
table/table_test.cc:1854:56: error: missing initializer for member ‘rocksdb::TestArgs::format_version’ [-Werror=missing-field-initializers]
TestArgs args = { DB_TEST, false, 16, kNoCompression };
^
Add the missing, 5th value (format_version).
Test Plan:
Run "make EXTRA_CXXFLAGS='-W -Wextra'" and see fewer errors.
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33765
Summary:
Remove some always-true assertions.
They provoke these compilation failures:
table/plain_table_key_coding.cc:279:20: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
db/version_set.cc:336:15: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
* table/plain_table_key_coding.cc (rocksdb): Remove assertion that
unsigned type variable is >= 0.
* db/version_set.cc (DoGenerateLevelFilesBrief): Likewise.
Test Plan:
Run "make EXTRA_CXXFLAGS='-W -Wextra'" and see fewer errors.
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33747
Summary:
scan-build is reporting two memory leak bugs in `table/block_based_table_reader.cc`. They are both false positives. In both cases we allocate memory in `ReadBlockFromFile` if `s.ok()`. Then after the function `ReadBlockFromFile` returns we check for the same variable if `s.ok()` and then use the memory that was allocated. The bugs reported by scan-build is if `ReadBlockFromFile` allocates memory and returns, but for some reason status `s` is not the same and `s.ok() != true`.
In this case scan-build is concerned that memory owner transfer is not explicit. I modified `ReadBlockFromFile` to accept `std::unique_ptr<Block>*` as a parameter, instead of raw pointer.
scan-build reports:
http://home.fburl.com/~sugak/latest2/report-a4b3fa.html#EndPathhttp://home.fburl.com/~sugak/latest2/report-29adbf.html#EndPath
Test Plan:
Make sure scan-build does not report these bugs and all tests are passing.
```lang=bash
% make check
% make analyze
```
Reviewers: sdong, lgalanis, meyering, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33681
Summary: Remember whole key or prefix filtering on/off in SST files. If user opens the DB with a different setting that cannot be satisfied while reading the SST file, ignore the bloom filter.
Test Plan: Add a unit test for it
Reviewers: yhchiang, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32889
Summary:
Get() now doesn't make use of bloom filter if it is prefix based. Add the check.
Didn't touch block based bloom filter. I can't fully reason whether it is correct to do that. But it's straight-forward to for full bloom filter.
Test Plan:
make all check
Add a test case in DBTest
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D31941
Summary:
This diff adds BlockBasedTable format_version = 2. New format version brings better compressed block format for these compressions:
1) Zlib -- encode decompressed size in compressed block header
2) BZip2 -- encode decompressed size in compressed block header
3) LZ4 and LZ4HC -- instead of doing memcpy of size_t encode size as varint32. memcpy is very bad because the DB is not portable accross big/little endian machines or even platforms where size_t might be 8 or 4 bytes.
It does not affect format for snappy.
If you write a new database with format_version = 2, it will not be readable by RocksDB versions before 3.10. DB::Open() will return corruption in that case.
Test Plan:
Added a new test in db_test.
I will also run db_bench and verify VSIZE when block_cache == 1GB
Reviewers: yhchiang, rven, MarkCallaghan, dhruba, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31461
Summary:
In this diff I add another parameter to BlockBasedTableOptions that will let users specify block based table's format. This will greatly simplify block based table's format changes in the future.
First format change that this will support is encoding decompressed size in Zlib and BZip2 blocks. This diff is blocking https://reviews.facebook.net/D31311.
Test Plan: Added a unit tests. More tests to come as part of https://reviews.facebook.net/D31311.
Reviewers: dhruba, MarkCallaghan, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31383
Summary: We keep checksum functions in util/, there is no reason for compression to be in port/
Test Plan: compiles
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31281
Summary:
Introduces a new class for managing write buffer memory across column
families. We supplement ColumnFamilyOptions::write_buffer_size with
ColumnFamilyOptions::write_buffer, a shared pointer to a WriteBuffer
instance that enforces memory limits before flushing out to disk.
Test Plan: Added SharedWriteBuffer unit test to db_test.cc
Reviewers: sdong, rven, ljin, igor
Reviewed By: igor
Subscribers: tnovak, yhchiang, dhruba, xjin, MarkCallaghan, yoshinorim
Differential Revision: https://reviews.facebook.net/D22581
Summary: Block plain_table_index.cc in ROCKSDB_LITE
Test Plan:
make clean
make OPT=-DROCKSDB_LITE shared_lib -j32
make clean
make shared_lib -j32
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29535
Summary:
In some environment such as android, the c++ library does not have
std::to_string. This path adds rocksdb::ToString(), which wraps std::to_string
when std::to_string is not available, and implements std::to_string
in the other case.
Test Plan:
make dbg -j32
./db_test
make clean
make dbg OPT=-DOS_ANDROID -j32
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29181
Summary: Created a CompatibleOptions object that can be used as a LevelDB Options object and then converted to a RocksDB Options object using the ConvertOptions() method.
Test Plan: Unit test included in diff.
Reviewers: ljin
Reviewed By: ljin
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28893
Summary:
The very last reference happens in DBImpl::GetOptions()
I built with both DBImpl::GetOptions() and ColumnFamilyData::options() commented out
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29073
Summary:
This is just a simple test that passes two files though a compaction. It shows the framework so that people can continue building new compaction *unit* tests.
In the future we might want to move some Compaction* tests from DBTest here. For example, CompactBetweenSnapshot seems a good candidate.
Hopefully this test can be simpler when we mock out VersionSet.
Test Plan: this is a test
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28449
Summary:
Make db_stress built for ROCKSDB_LITE.
The test doesn't pass tough. It seg fault quickly. But I took a look and it doesn't seem to be related to lite version. Likely to be a bug inside RocksDB.
Test Plan: make db_stress
Reviewers: yhchiang, rven, ljin, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28797
Summary: So iOS size_t is 32-bit, so we need to static_cast<size_t> any uint64_t :(
Test Plan: TARGET_OS=IOS make static_lib
Reviewers: dhruba, ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28743
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary: Previously I made `make check` work with -Wshadow, but there are some tools that are not compiled using `make check`.
Test Plan: make all
Reviewers: yhchiang, rven, ljin, sdong
Reviewed By: ljin, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28497
Summary: It turns out that -Wshadow has different rules for gcc than clang. Previous commit fixed clang. This commits fixes the rest of the warnings for gcc.
Test Plan: compiles
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28131
Summary:
...and fix all the errors :)
Jim suggested turning on -Wshadow because it helped him fix number of critical bugs in fbcode. I think it's a good idea to be -Wshadow clean.
Test Plan: compiles
Reviewers: yhchiang, rven, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27711
Summary:
Apply InfoLogLevel to the logs in table/block_based_table_reader.cc
Also, add missing checks for the returned status in BlockBasedTable::Open
Test Plan: make
Reviewers: sdong, ljin, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D28005
Summary: Apply InfoLogLevel to the logs in table/meta_blocks.cc
Test Plan: make
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27903
Summary: Apply InfoLogLevel to the logs in table/plain_table_index.cc
Test Plan: make
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27909
Summary: Apply InfoLogLevel to the logs in table/block_based_table_builder.cc
Test Plan: make
Reviewers: igor, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27921
Summary:
This diff replaces BlockBasedTable in flush_job_test with TableMock, making it depend on less things and making it closer to an unit test than integration test.
It also introduces a framework to compile mock classes -- Any file named *mock.cc will not be compiled into the build. It will only get compiled into the tests. What way we can mock out most other classes, Version, VersionSet, DBImpl, etc.
Test Plan: flush_job_test
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27681
Summary:
Make inplace_update_support and inplace_update_num_locks dynamic.
inplace_callback becomes immutable
We are almost free of references to cfd->options() in db_impl
Test Plan: unit test
Reviewers: igor, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D25293
Summary:
This fixes the case that filter policy is missing in SST file, but we
open the table with filter policy on and cache_index_and_filter_blocks =
false. The current behavior is that we will try to load it every time on
Get() but fail.
Test Plan: unit test
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D25455
Summary:
make compaction related options changeable. Most of changes are tedious,
following the same convention: grabs MutableCFOptions at the beginning
of compaction under mutex, then pass it throughout the job and register
it in SuperVersion at the end.
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23349
Fix for:
[table/cuckoo_table_reader.cc:196]: (performance) Function
parameter 'target' should be passed by reference.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Use %zu instead of %zd since size_t and uint32_t are unsigned.
Fix for:
[table/plain_table_factory.cc:55]: (warning) %zd in format string (no. 1)
requires 'ssize_t' but the argument type is 'size_t {aka unsigned long}'.
[table/plain_table_factory.cc:58]: (warning) %zd in format string (no. 1)
requires 'ssize_t' but the argument type is 'size_t {aka unsigned long}'.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Fix for:
[table/table_test.cc:1218]: (performance) Function parameter
'prefix' should be passed by reference.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Fix for:
[table/cuckoo_table_reader.cc:198]: (performance) Function
parameter 'file_data' should be passed by reference.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
[table/bloom_block.h:29]: (performance) Function parameter
'keys_hashes' should be passed by reference.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Summary:
Intead of passing callback function pointer and its arg on Table::Get()
interface, passing GetContext. This makes the interface cleaner and
possible better perf. Also adding a fast pass for SaveValue()
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24057
Summary:
when I changed std::vector<std::string, std::string> to std::string to
store key/value pairs in builder, I missed the handling for kDeletion
type. As a result, value_size_ can be wrong if the first add key is for
deletion.
The is captured by ./cuckoo_table_db_test
Test Plan:
./cuckoo_table_db_test
./cuckoo_table_reader_test
./cuckoo_table_builder_test
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24045
Summary:
cuckoo table iterator creation is quite expensive since it needs to load
all data and sort them. After compaction, RocksDB creates a new iterator
of the new file to make sure it is in good state. That makes the DB
creation quite slow. Delay the iterator db sort to the seek time to
speed it up.
Test Plan: db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23775
Summary:
builder currently buffers all key value pairs as a vector of
pair<string, string>. That is too much due to std::string
overhead. It wasn't able to fit 1B key/values (12bytes total) in 100GB
of ram. Switch to use a plain string to store the key/value sequence and
use only 12GB of ram as a result.
Test Plan: db_bench
Reviewers: igor, sdong, yhchiang
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23763
Summary:
When creating a new iterator, instead of storing mapping from key to
bucket id for sorting, store only bucket id and read key from mmap file
based on the id. This reduces from 20 bytes per entry to only 4 bytes.
Test Plan: db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23757
Summary:
Using module to calculate hash makes lookup ~8% slower. But it has its
benefit: file size is more predictable, more space enffient
Test Plan: db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23691
Summary:
Add a CompactedDBImpl that will enabled when calling OpenForReadOnly()
and the DB only has one level (>0) of files. As a performan comparison,
CuckooTable performs 2.1M/s with CompactedDBImpl vs. 1.78M/s with
ReadOnlyDBImpl.
Test Plan: db_bench
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23553
Summary:
It was commented out in D22545 by accident. Keep the option in
ImmutableOptions for now. I can make it dynamic in
https://reviews.facebook.net/D23349
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23865
Summary:
MurmurHash becomes expensive when we do millions Get() a second in one
thread. Add this option to allow the first hash function to use identity
function as hash function. It results in QPS increase from 3.7M/s to
~4.3M/s. I did not observe improvement for end to end RocksDB
performance. This may be caused by other bottlenecks that I will address
in a separate diff.
Test Plan:
```
[ljin@dev1964 rocksdb] ./cuckoo_table_reader_test --enable_perf --file_dir=/dev/shm --write --identity_as_first_hash=0
==== Test CuckooReaderTest.WhenKeyExists
==== Test CuckooReaderTest.WhenKeyExistsWithUint64Comparator
==== Test CuckooReaderTest.CheckIterator
==== Test CuckooReaderTest.CheckIteratorUint64
==== Test CuckooReaderTest.WhenKeyNotFound
==== Test CuckooReaderTest.TestReadPerformance
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.272us (3.7 Mqps) with batch size of 0, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.138us (7.2 Mqps) with batch size of 10, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.142us (7.1 Mqps) with batch size of 25, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.142us (7.0 Mqps) with batch size of 50, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.144us (6.9 Mqps) with batch size of 100, # of found keys 125829120
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.201us (5.0 Mqps) with batch size of 0, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.121us (8.3 Mqps) with batch size of 10, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.123us (8.1 Mqps) with batch size of 25, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.121us (8.3 Mqps) with batch size of 50, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.112us (8.9 Mqps) with batch size of 100, # of found keys 104857600
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.251us (4.0 Mqps) with batch size of 0, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.107us (9.4 Mqps) with batch size of 10, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.099us (10.1 Mqps) with batch size of 25, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.100us (10.0 Mqps) with batch size of 50, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.116us (8.6 Mqps) with batch size of 100, # of found keys 83886080
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.189us (5.3 Mqps) with batch size of 0, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.095us (10.5 Mqps) with batch size of 10, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.096us (10.4 Mqps) with batch size of 25, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.098us (10.2 Mqps) with batch size of 50, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.105us (9.5 Mqps) with batch size of 100, # of found keys 73400320
[ljin@dev1964 rocksdb] ./cuckoo_table_reader_test --enable_perf --file_dir=/dev/shm --write --identity_as_first_hash=1
==== Test CuckooReaderTest.WhenKeyExists
==== Test CuckooReaderTest.WhenKeyExistsWithUint64Comparator
==== Test CuckooReaderTest.CheckIterator
==== Test CuckooReaderTest.CheckIteratorUint64
==== Test CuckooReaderTest.WhenKeyNotFound
==== Test CuckooReaderTest.TestReadPerformance
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.230us (4.3 Mqps) with batch size of 0, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.086us (11.7 Mqps) with batch size of 10, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.088us (11.3 Mqps) with batch size of 25, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.083us (12.1 Mqps) with batch size of 50, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.083us (12.1 Mqps) with batch size of 100, # of found keys 125829120
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.159us (6.3 Mqps) with batch size of 0, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 10, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.080us (12.6 Mqps) with batch size of 25, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 50, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.082us (12.2 Mqps) with batch size of 100, # of found keys 104857600
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.154us (6.5 Mqps) with batch size of 0, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 10, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.077us (12.9 Mqps) with batch size of 25, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 50, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.079us (12.6 Mqps) with batch size of 100, # of found keys 83886080
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.218us (4.6 Mqps) with batch size of 0, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.083us (12.0 Mqps) with batch size of 10, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.085us (11.7 Mqps) with batch size of 25, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.086us (11.6 Mqps) with batch size of 50, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 100, # of found keys 73400320
```
Reviewers: sdong, igor, yhchiang
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23451
Summary:
This is continuing the work done by 27b22f13a3
It's just cleaning up some unnecessary constructors. The most important change is removing Block::Block(const BlockContents& contents) constructor. It was only used from the unit test.
Test Plan: compiles
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23547
This replaces a mishmash of pointers in the Block and BlockContents classes with
std::unique_ptr. It also changes the semantics of BlockContents to be limited to
use as a constructor parameter for Block objects, as it owns any block buffers
handed to it.
Summary:
This is to avoid cutting file prematurely and resulting file size to be
half of specified.
Test Plan: db_bench
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23541
Summary: as title
Test Plan:
make all check
I will think a way to set up stress test for this
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23055
Summary: This work on my compiler, but it turns out some compilers don't implicitly add constness, see: https://github.com/facebook/rocksdb/issues/284. This diff adds constness explicitly.
Test Plan: still compiles
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23409
Summary:
See t5106397.
Also, few more changes:
1. in unit tests, the assumption is that writes will be dropped when there is no space left on device. I changed the wording around it.
2. InvalidArgument() errors are only when user-provided arguments are invalid. When the file is corrupted, we need to return Status::Corruption
Test Plan: make check
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23145
Summary: removed reference to options in WriteBatch and DBImpl::Get()
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23049
Summary:
1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file.
2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter.
3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type.
4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h.
5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc
Benchmark: base commit 1d23b5c470
Command:
db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
Read QPS increase for about 30% from 2230002 to 2991411.
Test Plan:
make all check
valgrind db_test
db_stress --use_block_based_filter = 0
./auto_sanity_test.sh
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20979
Summary: Fix compaction bug in Cuckoo Table Builder. Use kvs_.size() instead of num_entries in FileSize() method. Also added tests.
Test Plan:
make check all
Also ran db_bench to generate multiple files.
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22743
Summary:
Simply code by removing code path which does not use Arena
from NewInternalIterator
Test Plan:
make all check
make valgrind_check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22395
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545
1, const qualifiers on return types make no sense and will trigger a compile warning: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
2, class HistogramImpl has virtual functions and thus should have a virtual destructor
3, with some toolchain, the macro __STDC_FORMAT_MACROS is predefined and thus should be checked before define
Change-Id: I69747a03bfae88671bfbb2637c80d17600159c99
Signed-off-by: liuhuahang <liuhuahang@zerus.co>
Summary: It only covers Open() with default column family right now
Test Plan: make release
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22467
This eliminates the need to remember to call PERF_TIMER_STOP when a section has
been timed. This allows more useful design with the perf timers and enables
possible return value optimizations. Simplistic example:
class Foo {
public:
Foo(int v) : m_v(v);
private:
int m_v;
}
Foo makeFrobbedFoo(int *errno)
{
*errno = 0;
return Foo();
}
Foo bar(int *errno)
{
PERF_TIMER_GUARD(some_timer);
return makeFrobbedFoo(errno);
}
int main(int argc, char[] argv)
{
Foo f;
int errno;
f = bar(&errno);
if (errno)
return -1;
return 0;
}
After bar() is called, perf_context.some_timer would be incremented as if
Stop(&perf_context.some_timer) was called at the end, and the compiler is still
able to produce optimizations on the return value from makeFrobbedFoo() through
to main().
Summary: gcc on our dev boxes is not happy about __attribute__((unused))
Test Plan: compiles now
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22707
Summary: We need to set contbuild for this :)
Test Plan: compiles
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22701
Summary:
Use inlined hash functions instead of function pointer. Make number of buckets a power of two and use bitwise and instead of mod.
After these changes, we get almost 50% improvement in performance.
Results:
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.231us (4.3 Mqps) with batch size of 0
Time taken per op is 0.229us (4.4 Mqps) with batch size of 0
Time taken per op is 0.185us (5.4 Mqps) with batch size of 0
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.108us (9.3 Mqps) with batch size of 10
Time taken per op is 0.100us (10.0 Mqps) with batch size of 10
Time taken per op is 0.103us (9.7 Mqps) with batch size of 10
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.101us (9.9 Mqps) with batch size of 25
Time taken per op is 0.098us (10.2 Mqps) with batch size of 25
Time taken per op is 0.097us (10.3 Mqps) with batch size of 25
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.100us (10.0 Mqps) with batch size of 50
Time taken per op is 0.097us (10.3 Mqps) with batch size of 50
Time taken per op is 0.097us (10.3 Mqps) with batch size of 50
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.102us (9.8 Mqps) with batch size of 100
Time taken per op is 0.098us (10.2 Mqps) with batch size of 100
Time taken per op is 0.115us (8.7 Mqps) with batch size of 100
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.201us (5.0 Mqps) with batch size of 0
Time taken per op is 0.155us (6.5 Mqps) with batch size of 0
Time taken per op is 0.152us (6.6 Mqps) with batch size of 0
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.089us (11.3 Mqps) with batch size of 10
Time taken per op is 0.084us (11.9 Mqps) with batch size of 10
Time taken per op is 0.086us (11.6 Mqps) with batch size of 10
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.087us (11.5 Mqps) with batch size of 25
Time taken per op is 0.085us (11.7 Mqps) with batch size of 25
Time taken per op is 0.093us (10.8 Mqps) with batch size of 25
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.094us (10.6 Mqps) with batch size of 50
Time taken per op is 0.094us (10.7 Mqps) with batch size of 50
Time taken per op is 0.093us (10.8 Mqps) with batch size of 50
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.092us (10.9 Mqps) with batch size of 100
Time taken per op is 0.089us (11.2 Mqps) with batch size of 100
Time taken per op is 0.088us (11.3 Mqps) with batch size of 100
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.154us (6.5 Mqps) with batch size of 0
Time taken per op is 0.168us (6.0 Mqps) with batch size of 0
Time taken per op is 0.190us (5.3 Mqps) with batch size of 0
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.081us (12.4 Mqps) with batch size of 10
Time taken per op is 0.077us (13.0 Mqps) with batch size of 10
Time taken per op is 0.083us (12.1 Mqps) with batch size of 10
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 25
Time taken per op is 0.073us (13.7 Mqps) with batch size of 25
Time taken per op is 0.073us (13.7 Mqps) with batch size of 25
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.076us (13.1 Mqps) with batch size of 50
Time taken per op is 0.072us (13.8 Mqps) with batch size of 50
Time taken per op is 0.072us (13.8 Mqps) with batch size of 50
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 100
Time taken per op is 0.074us (13.6 Mqps) with batch size of 100
Time taken per op is 0.073us (13.6 Mqps) with batch size of 100
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.190us (5.3 Mqps) with batch size of 0
Time taken per op is 0.186us (5.4 Mqps) with batch size of 0
Time taken per op is 0.184us (5.4 Mqps) with batch size of 0
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.079us (12.7 Mqps) with batch size of 10
Time taken per op is 0.070us (14.2 Mqps) with batch size of 10
Time taken per op is 0.072us (14.0 Mqps) with batch size of 10
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 25
Time taken per op is 0.072us (14.0 Mqps) with batch size of 25
Time taken per op is 0.071us (14.1 Mqps) with batch size of 25
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.082us (12.1 Mqps) with batch size of 50
Time taken per op is 0.071us (14.1 Mqps) with batch size of 50
Time taken per op is 0.073us (13.6 Mqps) with batch size of 50
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 100
Time taken per op is 0.077us (13.0 Mqps) with batch size of 100
Time taken per op is 0.078us (12.8 Mqps) with batch size of 100
Test Plan:
make check all
make valgrind_check
make asan_check
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22539
Summary:
When reading from kBlockCacheTier, ForwardIterator's internal child iterators
may end up in the incomplete state (read was unable to complete without doing
disk I/O). `ForwardIterator::status()` will correctly report that; however, the
iterator may be stuck in that state until all sub-iterators are rebuilt:
* `NeedToSeekImmutable()` may return false even if some sub-iterators are
incomplete
* one of the child iterators may be an empty iterator without any state other
that the kIncomplete status (created using `NewErrorIterator()`); seeking on
any such iterator has no effect -- we need to construct it again
Akin to rebuilding iterators after a superversion bump, this diff makes forward
iterator reset all incomplete child iterators when `Seek()` or `Next()` are
called.
Test Plan: TEST_TMPDIR=/dev/shm/rocksdbtest ROCKSDB_TESTS=TailingIterator ./db_test
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: lovro, march, leveldb
Differential Revision: https://reviews.facebook.net/D22575
Summary:
1. remove class InternalFilterPolicy in db/dbformat.h
2. Transformation from internal key to user key is done in filter_block.cc
3. This is a preparation for patch D20979
Test Plan:
make all check
valgrind ./db_test
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22509
Summary: This implements a cache friendly version of Cuckoo Hash in which, in case of collission, we try to insert in next few locations. The size of the neighborhood to check is taken as an input parameter in builder and stored in the table.
Test Plan:
make check all
cuckoo_table_{db,reader,builder}_test
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22455
Summary:
- New Uint64 comparator
- Modify Reader and Builder to take custom user comparators instead of bytewise comparator
- Modify logic for choosing unused user key in builder
- Modify iterator logic in reader
- test changes
Test Plan:
cuckoo_table_{builder,reader,db}_test
make check all
Reviewers: ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22377
Summary: Add a virtual function in table factory that will print table options
Test Plan: make release
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22149
Summary:
I will move compression related options in a separate diff since this
diff is already pretty lengthy.
I guess I will also need to change JNI accordingly :(
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21915
Summary:
- Implement Prepare method
- Rewrite performance tests in cuckoo_table_reader_test to write new file only if one doesn't already exist.
- Add performance tests for batch lookup along with prefetching.
Test Plan:
./cuckoo_table_reader_test --enable_perf
Results (We get better results if we used int64 comparator instead of string comparator (TBD in future diffs)):
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.208us (4.8 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.182us (5.5 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.161us (6.2 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.161us (6.2 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.163us (6.1 Mqps) with batch size of 100
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.252us (4.0 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.192us (5.2 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.195us (5.1 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.191us (5.2 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.194us (5.1 Mqps) with batch size of 100
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.228us (4.4 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.185us (5.4 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.186us (5.4 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.189us (5.3 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.188us (5.3 Mqps) with batch size of 100
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.325us (3.1 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.196us (5.1 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.199us (5.0 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.196us (5.1 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.209us (4.8 Mqps) with batch size of 100
Reviewers: sdong, yhchiang, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22167
Summary:
Currently, PlainTable must use mmap_reads. When PlainTable is used but
allow_mmap_reads is not set, rocksdb will fail in flush.
This diff improve Options sanitization and add MmapReadRequired() to
TableFactory.
Test Plan:
export ROCKSDB_TESTS=PlainTableOptionsSanitizeTest
make db_test -j32
./db_test
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: you, leveldb
Differential Revision: https://reviews.facebook.net/D21939
Summary: Make table_reader_bench cover all the three table formats.
Test Plan: Run it using three options
Reviewers: radheshyamb, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22137
Summary:
Avoid retrying to read property block from a table when it does not exist
in updating stats for compensating deletion entries.
In addition, ReadTableProperties() now returns Status::NotFound instead
of Status::Corruption when table properties does not exist in the file.
Test Plan:
make db_test -j32
export ROCKSDB_TESTS=CompactionDeleteionTrigger
./db_test
Reviewers: ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21867
Summary:
Contains the following changes:
- Implementation of cuckoo_table_factory
- Adding cuckoo table into AdaptiveTableFactory
- Adding cuckoo_table_db_test, similar to lines of plain_table_db_test
- Minor fixes to Reader: When a key is found in the table, return the key found instead of the search key.
- Minor fixes to Builder: Add table properties that are required by Version::UpdateTemporaryStats() during Get operation. Don't define curr_node as a reference variable as the memory locations may get reassigned during tree.push_back operation, leading to invalid memory access.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
cuckoo_table_db_test
make check all
make valgrind_check
make asan_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21219
* Script for building the unity.cc file via Makefile
* Unity executable Makefile target for testing builds
* Source code changes to fix compilation of unity build
Summary:
Add a DB Property "rocksdb.estimate-table-readers-mem" to return estimated memory usage by all loaded table readers, other than allocated from block cache.
Refactor the property codes to allow getting property from a version, with DB mutex not acquired.
Test Plan: Add several checks of this new property in existing codes for various cases.
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D20733
Summary:
- Maintain a list of key-value pairs as vectors during Add operation.
- Start building hash table only when Finish() is called.
- This approach takes more time and space but avoids taking file_size, key and value lengths.
- Rewrote cuckoo_table_builder_test
I did not know about IterKey while writing this diff. I shall change places where IterKey could be used instead of std::string tomorrow. Please review rest of the logic.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
valgrind_check
asan_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20907
Summary:
- Reads key-value pairs from file and builds an in-memory index of key-to-bucket id map in sorted order of key.
- Assumes bytewise comparator for sorting keys.
- Test changes
Test Plan:
cuckoo_table_reader_test --enable_perf
valgrind_check
asan_check
Reviewers: yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb, igor
Differential Revision: https://reviews.facebook.net/D20721
Summary: port::MemoryBarrier() is not recommended to use outside of port. Remove it.
Test Plan: run table_reader_bench
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21075
Summary:
1. logging when create and delete manifest file
2. fix formating in table/format.cc
Test Plan:
make all check
run db_bench, track the LOG file.
Reviewers: ljin, yhchiang, igor, yufei.zhu, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21009
Summary: Made some small changes to fix the broken mac build
Test Plan: make check all in both linux and mac. All tests pass.
Reviewers: sdong, igor, ljin, yhchiang
Reviewed By: ljin, yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20895
Summary:
When compression is enabled, and blocksize is not too big, use the
space in stack to hold bytes read from block.
Bencmark:
base version: commit 8f09d53fd1
malloc: 1.30% -> 0.98%
free: 1.49% -> 1.07%
Test Plan:
make all check
Reviewers: ljin, yhchiang, dhruba, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20679
Summary:
Define Block::Iter to be an independent class to be used by block_based_table_reader
When creating data and index iterator, update an existing iterator rather than new one
Thus malloc and free could be reduced
Benchmark,
Base:
commit 76286ee67e
commands:
--db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=2621440 --use_hash_search=1 --block_size=1024 --block_restart_interval=1 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
malloc: 3.30% -> 1.42%
free: 3.59%->1.61%
Test Plan:
make all check
run db_stress
valgrind ./db_test ./table_test
Reviewers: ljin, yhchiang, dhruba, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20655
Summary:
- Copy the key and value to in-memory hash table during Add operation. Also modified cuckoo_table_reader_test to use this.
- Store only the user_key in in-memory hash table if it is last level file.
- Handle Carryover while chosing unused key in Finish() method in case unused key was never found before Finish() call.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
valgrind_check
asan_check
Reviewers: sdong, yhchiang, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20715
Summary:
Make StatisticsImpl being able to forward stats to provided statistics
implementation. The main purpose is to allow us to collect internal
stats in the future even when user supplies custom statistics
implementation. It avoids intrumenting 2 sets of stats collection code.
One immediate use case is tuning advisor, which needs to collect some
internal stats, users may not be interested.
Test Plan:
ran db_bench and see stats show up at the end of run
Will run make all check since some tests rely on statistics
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20145
Summary:
In block based table's hash index checking, when looking for a key that doesn't exist, there is a high chance that a false block is returned because of hash bucket conflicts. In this revision, another check is done to filter out some of those cases: comparing previous key of the block boundary to see whether the target block is what we are looking for.
In a favored test setting (bloom filter disabled, 8 L0 files), I saw about 80% improvements. In a non-favored test setting (bloom filter enabled, files are all in L1, files are all cached), I see the performance penalty is less than 3%.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: wuj, leveldb, zagfox, yhchiang
Differential Revision: https://reviews.facebook.net/D20595
Summary:
Contains:
- Implementation of TableReader based on Cuckoo Hashing
- Unittests for CuckooTableReader
- Performance test for TableReader
Test Plan:
make cuckoo_table_reader_test
./cuckoo_table_reader_test
make valgrind_check
make asan_check
Reviewers: yhchiang, sdong, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20511
Summary:
Contains the following changes in CuckooTableBuilder:
- Take an extra parameter in constructor to identify last level file.
- Implement a better way to identify if a bucket has been inserted into the tree already during BFS search.
- Minor typos
Test Plan:
make cuckoo_table_builder
./cuckoo_table_builder
make valgrind_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20445
Summary:
Modify a functioin TrimAppend in dbformat.h: IterKey. Write a test for it in dbformat_test
Use IterKey in block::Iter to replace std::string to reduce malloc.
Evaluate it using perf record.
malloc: 4.26% -> 2.91%
free: 3.61% -> 3.08%
Test Plan:
make all check
./valgrind db_test dbformat_test
Reviewers: ljin, haobo, yhchiang, dhruba, igor, sdong
Reviewed By: sdong
Differential Revision: https://reviews.facebook.net/D20433
Summary: Fixes some memory leaks in cuckoo_builder_test.cc. This also fixed broken valgrind_check tests
Test Plan:
make valgrind_check
./cuckoo_builder_test
Currently running make check all. I shall update once it is done.
Reviewers: ljin, sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20385
Summary:
Fixed the following compile error.
./table/cuckoo_table_builder.h:72:22: error: private field 'key_length_' is not used [-Werror,-Wunused-private-field]
const unsigned int key_length_;
^
1 error generated.
Test Plan: make
Reviewers: sdong, ljin, radheshyamb, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20349
Summary:
Adding option to save PlainTable index and bloom filter in SST file.
If there is no bloom block and/or index block, PlainTableReader builds
new ones. Otherwise PlainTableReader just use these blocks.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19527
Summary:
Since we have a lot of options for PlainTable, add a struct PlainTableOptions
to manage them
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20175
Summary:
Seems like NewTotalOrderPlainTableFactory is useless and is semantically incorrect.
Total order mode indicator is prefix_extractor == nullptr,
but NewTotalOrderPlainTableFactory doesn't set it to be nullptr. That's why some tests
in plain_table_db_tests is incorrect.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19587
