Summary:
Rebased and resubmitting #1831 on behalf of stevelittle.
The problem is when a single process attempts to open the same DB twice, the second attempt fails due to LOCK file held. If the second attempt had opened the LOCK file, it'll now need to close it, and closing causes the file to be unlocked. Then, any subsequent attempt to open the DB will succeed, which is the wrong behavior.
The solution was to track which files a process has locked in PosixEnv, and check those before opening a LOCK file.
Fixes#1780.
Closes https://github.com/facebook/rocksdb/pull/3993
Differential Revision: D8398984
Pulled By: ajkr
fbshipit-source-id: 2755fe66950a0c9de63075f932f9e15768041918
Summary:
In `db_stress` profile the vast majority of CPU time is spent acquiring the `SyncPoint` mutex. I mistakenly assumed #3939 had fixed this mutex contention problem by disabling `SyncPoint` processing. But actually the lock was still being acquired just to check whether processing is enabled. We can avoid that overhead by using an atomic to track whether it's enabled.
Closes https://github.com/facebook/rocksdb/pull/3991
Differential Revision: D8393825
Pulled By: ajkr
fbshipit-source-id: 5bc4e3c722ee7304e7a9c2439998c456b05a6897
Summary:
Depending on the compression type, `CompressBlock` calls the compress method for each compression type. It calls ZSTD_Compress for both kZSTD and kZSTDNotFinalCompression (https://github.com/facebook/rocksdb/blob/master/table/block_based_table_builder.cc#L169).
However currently ZSTD_Compress only expects the type to be kZSTD and this is causing assert failures and crashes. The same also applies to ZSTD_Uncompress.
Closes https://github.com/facebook/rocksdb/pull/3964
Differential Revision: D8308715
Pulled By: miasantreble
fbshipit-source-id: e5125f53edb829c9c33733167bec74e4793d0782
Summary:
PR https://github.com/facebook/rocksdb/pull/3838 made some changes that triggers lint warnings.
Run `make format` to fix formatting as suggested by siying .
Also piggyback two changes:
1) fix singleton destruction order for windows and posix env
2) fix two clang warnings
Closes https://github.com/facebook/rocksdb/pull/3954
Differential Revision: D8272041
Pulled By: miasantreble
fbshipit-source-id: 7c4fd12bd17aac13534520de0c733328aa3c6c9f
Summary:
format_version=3 changes the format of SST index. This is however not being tested currently since tests only work with the default format_version which is currently 2. The patch extends the most related tests to also test for format_version=3.
Closes https://github.com/facebook/rocksdb/pull/3942
Differential Revision: D8238413
Pulled By: maysamyabandeh
fbshipit-source-id: 915725f55753dd8e9188e802bf471c23645ad035
Summary:
Ensure the PosixEnv singleton is destroyed first since its destructor waits for background threads to all complete. This ensures background threads cannot hit sync points after the SyncPoint singleton is destroyed, which was previously possible.
Closes https://github.com/facebook/rocksdb/pull/3951
Differential Revision: D8265295
Pulled By: ajkr
fbshipit-source-id: 7738dd458c5d993a78377dd0420e82badada81ab
Summary:
Windows does not have LD_PRELOAD mechanism to override all memory allocation functions and ZSTD makes use of C-tuntime calloc. During flushes and compactions default system allocator fragments and the system slows down considerably.
For builds with jemalloc we employ an advanced ZSTD context creation API that re-directs memory allocation to jemalloc. To reduce the cost of context creation on each block we cache ZSTD context within the block based table builder while a new SST file is being built, this will help all platform builds including those w/o jemalloc. This avoids system allocator fragmentation and improves the performance.
The change does not address random reads and currently on Windows reads with ZSTD regress as compared with SNAPPY compression.
Closes https://github.com/facebook/rocksdb/pull/3838
Differential Revision: D8229794
Pulled By: miasantreble
fbshipit-source-id: 719b622ab7bf4109819bc44f45ec66f0dd3ee80d
Summary:
Index blocks have the same format as data blocks. The keys therefore similarly to the keys in the data blocks are internal keys, which means that in addition to the user key it also has 8 bytes that encodes sequence number and value type. This extra 8 bytes however is not necessary in index blocks since the index keys act as an separator between two data blocks. The only exception is when the last key of a block and the first key of the next block share the same user key, in which the sequence number is required to act as a separator.
The patch excludes the sequence from index keys only if the above special case does not happen for any of the index keys. It then records that in the property block. The reader looks at the property block to see if it should expect sequence numbers in the keys of the index block.s
Closes https://github.com/facebook/rocksdb/pull/3894
Differential Revision: D8118775
Pulled By: maysamyabandeh
fbshipit-source-id: 915479f028b5799ca91671d67455ecdefbd873bd
Summary:
Previously we were using -1 as the default for every library, which was legacy from our zlib options. That worked for a while, but after zstd introduced a146ee04ae, it started giving poor compression ratios by default in zstd.
This PR adds a constant to RocksDB public API, `CompressionOptions::kDefaultCompressionLevel`, which will get translated to the default value specific to the compression library being used in "util/compression.h". The constant uses a number that appears to be larger than any library's maximum compression level.
Closes https://github.com/facebook/rocksdb/pull/3895
Differential Revision: D8125780
Pulled By: ajkr
fbshipit-source-id: 2db157a89118cd4f94577c2f4a0a5ff31c8391c6
Summary:
`RangeDelAggregator` holds the pointers returned by `BlockIter::key()` and `BlockIter::value()` so requires the data to which they point is pinned. `BlockIter::key()` points into block memory and is guaranteed to be pinned if and only if prefix encoding is disabled (or, equivalently, restart interval is set to one). I think `BlockIter::value()` is always pinned. Added an assert for these and removed the wrong TODO about increasing restart interval, which would enable key prefix encoding and break the assertion.
Closes https://github.com/facebook/rocksdb/pull/3875
Differential Revision: D8063667
Pulled By: ajkr
fbshipit-source-id: 60b5ebcc0cdd610dd6aad9e74a23378793672c41
Summary:
Right now ReverseBytewiseComparator::FindShortestSeparator() doesn't really shorten key, and ReverseBytewiseComparator::FindShortestSuccessor() seems to return wrong results. The code is confusing too as it uses BytewiseComparatorImpl::FindShortestSeparator() but the function actually won't do anything if the the first key is larger than the second.
Implement ReverseBytewiseComparator::FindShortestSeparator() and override ReverseBytewiseComparator::FindShortestSuccessor() to be empty.
Closes https://github.com/facebook/rocksdb/pull/3836
Differential Revision: D7959762
Pulled By: siying
fbshipit-source-id: 93acb621c16ce6f23e087ae4e19f7d84d1254683
Summary:
Currently manual_wal_flush if set in the options will be used only for the wal files created during wal switch. The configuration thus does not affect the first wal file. The patch fixes that and also update the related unit tests.
This PR is built on top of https://github.com/facebook/rocksdb/pull/3756
Closes https://github.com/facebook/rocksdb/pull/3824
Differential Revision: D7909153
Pulled By: maysamyabandeh
fbshipit-source-id: 024ed99d2555db06bf096c902b998e432bb7b9ce
Summary:
Previously `DBOptions::use_direct_io_for_flush_and_compaction=true` combined with `DBOptions::use_direct_reads=false` could cause RocksDB to simultaneously read from two file descriptors for the same file, where background reads used direct I/O and foreground reads used buffered I/O. Our measurements found this mixed-mode I/O negatively impacted foreground read perf, compared to when only buffered I/O was used.
This PR makes the mixed-mode I/O situation impossible by repurposing `DBOptions::use_direct_io_for_flush_and_compaction` to only apply to background writes, and `DBOptions::use_direct_reads` to apply to all reads. There is no risk of direct background direct writes happening simultaneously with buffered reads since we never read from and write to the same file simultaneously.
Closes https://github.com/facebook/rocksdb/pull/3829
Differential Revision: D7915443
Pulled By: ajkr
fbshipit-source-id: 78bcbf276449b7e7766ab6b0db246f789fb1b279
Summary:
`ReadaheadRandomAccessFile` had an unwritten assumption, which was that its wrapped file's `Read()` function always copies into the provided scratch buffer. Actually this was not true when the wrapped file was `PosixMmapReadableFile`, whose `Read()` implementation does no copying and instead returns a `Slice` pointing directly into the `mmap`'d memory region. This PR:
- prevents `ReadaheadRandomAccessFile` from ever wrapping mmap readable files
- adds an assert for the assumption `ReadaheadRandomAccessFile` makes about the wrapped file's use of scratch buffer
Closes https://github.com/facebook/rocksdb/pull/3813
Differential Revision: D7891513
Pulled By: ajkr
fbshipit-source-id: dc64a55222d6af280c39a1852ee39e9e9d7cde7d
Summary:
Rollback was disabled in stress test since there was a concurrency issue in WritePrepared rollback algorithm. The issue is fixed by caching the column family handles in WritePrepared to skip getting them from the db when needed for rollback.
Tested by running transaction stress test under tsan.
Closes https://github.com/facebook/rocksdb/pull/3785
Differential Revision: D7793727
Pulled By: maysamyabandeh
fbshipit-source-id: d81ab6fda0e53186ca69944cfe0712ce4869451e
Summary:
sync parent directory after deleting a file in delete scheduler. Otherwise, trim speed may not be as smooth as what we want.
Closes https://github.com/facebook/rocksdb/pull/3767
Differential Revision: D7760136
Pulled By: siying
fbshipit-source-id: ec131d53b61953f09c60d67e901e5eeb2716b05f
Summary:
WritePrepared rollback implementation is not ready to be invoked in the middle of workload. This is due the lack of synchronization to obtain the cf handle from db. Temporarily disabling this until the problem with rollback is fixed.
Closes https://github.com/facebook/rocksdb/pull/3772
Differential Revision: D7769041
Pulled By: maysamyabandeh
fbshipit-source-id: 0e3b0ce679bc2afba82e653a40afa3f045722754
Summary:
Background activities like compaction can negatively affect
latency of higher-priority tasks like request processing. To avoid this,
rocksdb already lowers the IO priority of background threads on Linux
systems. While this takes care of typical IO-bound systems, it does not
help much when CPU (temporarily) becomes the bottleneck. This is
especially likely when using more expensive compression settings.
This patch adds an API to allow for lowering the CPU priority of
background threads, modeled on the IO priority API. Benchmarks (see
below) show significant latency and throughput improvements when CPU
bound. As a result, workloads with some CPU usage bursts should benefit
from lower latencies at a given utilization, or should be able to push
utilization higher at a given request latency target.
A useful side effect is that compaction CPU usage is now easily visible
in common tools, allowing for an easier estimation of the contribution
of compaction vs. request processing threads.
As with IO priority, the implementation is limited to Linux, degrading
to a no-op on other systems.
Closes https://github.com/facebook/rocksdb/pull/3763
Differential Revision: D7740096
Pulled By: gwicke
fbshipit-source-id: e5d32373e8dc403a7b0c2227023f9ce4f22b413c
Summary:
Currently WritePrepared rolls back a transaction with prepare sequence number prepare_seq by i) write a single rollback batch with rollback_seq, ii) add <rollback_seq, rollback_seq> to commit cache, iii) remove prepare_seq from PrepareHeap.
This is correct assuming that there is no snapshot taken when a transaction is rolled back. This is the case the way MySQL does rollback which is after recovery. Otherwise if max_evicted_seq advances the prepare_seq, the live snapshot might assume data as committed since it does not find them in CommitCache.
The change is to simply add <prepare_seq. rollback_seq> to commit cache before removing prepare_seq from PrepareHeap. In this way if max_evicted_seq advances prpeare_seq, the existing mechanism that we have to check evicted entries against live snapshots will make sure that the live snapshot will not see the data of rolled back transaction.
Closes https://github.com/facebook/rocksdb/pull/3745
Differential Revision: D7696193
Pulled By: maysamyabandeh
fbshipit-source-id: c9a2d46341ddc03554dded1303520a1cab74ef9c
Summary:
Right now in `SyncClosedLogs`, `CopyFile`, and `AddRecord`, where `Sync` and `Append` are invoked in a loop, the error status are not checked. This could lead to potential corruption as later calls will overwrite the error status.
Closes https://github.com/facebook/rocksdb/pull/3740
Differential Revision: D7678848
Pulled By: miasantreble
fbshipit-source-id: 4b0b412975989dfe80348f73217b9c4122a4bd77
Summary:
Previously threads were named "rocksdb:bg\<index in thread pool\>", so the first thread in all thread pools would be named "rocksdb:bg0". Users want to be able to distinguish threads used for flush (high-pri) vs regular compaction (low-pri) vs compaction to bottom-level (bottom-pri). So I changed the thread naming convention to include the thread-pool priority.
Closes https://github.com/facebook/rocksdb/pull/3702
Differential Revision: D7581415
Pulled By: ajkr
fbshipit-source-id: ce04482b6acd956a401ef22dc168b84f76f7d7c1
Summary:
db_stress was already capable running transactions by setting use_txn. Running it under stress showed a couple of problems fixed in this patch.
- The uncommitted transaction must be either rolled back or commit after recovery.
- Current implementation of WritePrepared transaction cannot handle cf drop before crash. Clarified that in the comments and added safety checks. When running with use_txn, clear_column_family_one_in must be set to 0.
Closes https://github.com/facebook/rocksdb/pull/3733
Differential Revision: D7654419
Pulled By: maysamyabandeh
fbshipit-source-id: a024bad80a9dc99677398c00d29ff17d4436b7f3
Summary:
this PR fixes a few failed contbuild:
1. ASAN memory leak in Block::NewIterator (table/block.cc:429). the proper destruction of first_level_iter_ and second_level_iter_ of two_level_iterator.cc is missing from the code after the refactoring in https://github.com/facebook/rocksdb/pull/3406
2. various unused param errors introduced by https://github.com/facebook/rocksdb/pull/3662
3. updated comment for `ForceReleaseCachedEntry` to emphasize the use of `force_erase` flag.
Closes https://github.com/facebook/rocksdb/pull/3718
Reviewed By: maysamyabandeh
Differential Revision: D7621192
Pulled By: miasantreble
fbshipit-source-id: 476c94264083a0730ded957c29de7807e4f5b146
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Level Compaction with TTL.
As of today, a file could exist in the LSM tree without going through the compaction process for a really long time if there are no updates to the data in the file's key range. For example, in certain use cases, the keys are not actually "deleted"; instead they are just set to empty values. There might not be any more writes to this "deleted" key range, and if so, such data could remain in the LSM for a really long time resulting in wasted space.
Introducing a TTL could solve this problem. Files (and, in turn, data) older than TTL will be scheduled for compaction when there is no other background work. This will make the data go through the regular compaction process and get rid of old unwanted data.
This also has the (good) side-effect of all the data in the non-bottommost level being newer than ttl, and all data in the bottommost level older than ttl. It could lead to more writes while reducing space.
This functionality can be controlled by the newly introduced column family option -- ttl.
TODO for later:
- Make ttl mutable
- Extend TTL to Universal compaction as well? (TTL is already supported in FIFO)
- Maybe deprecate CompactionOptionsFIFO.ttl in favor of this new ttl option.
Closes https://github.com/facebook/rocksdb/pull/3591
Differential Revision: D7275442
Pulled By: sagar0
fbshipit-source-id: dcba484717341200d419b0953dafcdf9eb2f0267
Summary:
Manual compactions should be cancelled, just like scheduled compactions are cancelled, if sfm->EnoughRoomForCompaction is not true.
Closes https://github.com/facebook/rocksdb/pull/3670
Differential Revision: D7457683
Pulled By: amytai
fbshipit-source-id: 669b02fdb707f75db576d03d2c818fb98d1876f5
Summary:
This was failing the build on windows with zstd, warning treated as an error, 32-bit shift implicitly converted to 64-bit.
Closes https://github.com/facebook/rocksdb/pull/3624
Differential Revision: D7307883
Pulled By: gfosco
fbshipit-source-id: 68110e9b5b1b59b668dec6cf86b67556402574e7
Summary:
Provide a block_align option in BlockBasedTableOptions to allow
alignment of SST file data blocks. This will avoid higher
IOPS/throughput load due to < 4KB data blocks spanning 2 4KB pages.
When this option is set to true, the block alignment is set to lower of
block size and 4KB.
Closes https://github.com/facebook/rocksdb/pull/3502
Differential Revision: D7400897
Pulled By: anand1976
fbshipit-source-id: 04cc3bd144e88e3431a4f97604e63ad7a0f06d44
Summary:
Add `bytes_max_delete_chunk` in SstFileManager so that we can drop a large file in multiple batches.
Closes https://github.com/facebook/rocksdb/pull/3640
Differential Revision: D7358679
Pulled By: siying
fbshipit-source-id: ef17f0da2f5723dbece2669485a9b91b3edc0bb7
Summary:
Implemented PositionedAppend() and use_direct_io() for TestWritableFile.
With these changes, FaultInjectionTestEnv can be used with DirectIO enabled.
Closes https://github.com/facebook/rocksdb/pull/3586
Differential Revision: D7244305
Pulled By: yiwu-arbug
fbshipit-source-id: f6b7aece53daa0f9977bc684164a0693693e514c
Summary:
This diff handles cases where compaction causes an ENOSPC error.
This does not handle corner cases where another background job is started while compaction is running, and the other background job triggers ENOSPC, although we do allow the user to provision for these background jobs with SstFileManager::SetCompactionBufferSize.
It also does not handle the case where compaction has finished and some other background job independently triggers ENOSPC.
Usage: Functionality is inside SstFileManager. In particular, users should set SstFileManager::SetMaxAllowedSpaceUsage, which is the reference highwatermark for determining whether to cancel compactions.
Closes https://github.com/facebook/rocksdb/pull/3449
Differential Revision: D7016941
Pulled By: amytai
fbshipit-source-id: 8965ab8dd8b00972e771637a41b4e6c645450445
Summary:
Now that files scheduled for deletion are kept in the same directory, we don't need to constrain deletion scheduler to `db_paths[0]`. Previously this was done because there was a separate trash directory, and this constraint prevented files from being accidentally copied to another filesystem when they're scheduled for deletion.
Closes https://github.com/facebook/rocksdb/pull/3544
Differential Revision: D7093786
Pulled By: ajkr
fbshipit-source-id: 202f5c92d925eafebec1281fb95bb5828d33414f
Summary:
In attempting to build a static lib for use in iOS, I ran in to lots of type errors between uint64_t and size_t. This PR contains the changes I made to get `TARGET_OS=IOS make static_lib` to succeed while also getting Xcode to build successfully with the resulting `librocksdb.a` library imported.
This also compiles for me on macOS and tests fine, but I'm really not sure if I made the correct decisions about where to `static_cast` and where to change types.
Also up for discussion: is iOS worth supporting? Getting the static lib is just part one, we aren't providing any bridging headers or wrappers like the ObjectiveRocks project, it won't be a great experience.
Closes https://github.com/facebook/rocksdb/pull/3503
Differential Revision: D7106457
Pulled By: gfosco
fbshipit-source-id: 82ac2073de7e1f09b91f6b4faea91d18bd311f8e
Summary:
This patch addressed several issues.
Portability including db_test std::thread -> port::Thread Cc: @
and %z to ROCKSDB portable macro. Cc: maysamyabandeh
Implement Env::AreFilesSame
Make the implementation of file unique number more robust
Get rid of C-runtime and go directly to Windows API when dealing
with file primitives.
Implement GetSectorSize() and aling unbuffered read on the value if
available.
Adjust Windows Logger for the new interface, implement CloseImpl() Cc: anand1976
Fix test running script issue where $status var was of incorrect scope
so the failures were swallowed and not reported.
DestroyDB() creates a logger and opens a LOG file in the directory
being cleaned up. This holds a lock on the folder and the cleanup is
prevented. This fails one of the checkpoin tests. We observe the same in production.
We close the log file in this change.
Fix DBTest2.ReadAmpBitmapLiveInCacheAfterDBClose failure where the test
attempts to open a directory with NewRandomAccessFile which does not
work on Windows.
Fix DBTest.SoftLimit as it is dependent on thread timing. CC: yiwu-arbug
Closes https://github.com/facebook/rocksdb/pull/3552
Differential Revision: D7156304
Pulled By: siying
fbshipit-source-id: 43db0a757f1dfceffeb2b7988043156639173f5b
Summary:
Move DuplicateDetector and SetComparator to its own header file in util. It would also address a complaint in the unity test.
Closes https://github.com/facebook/rocksdb/pull/3567
Differential Revision: D7163268
Pulled By: maysamyabandeh
fbshipit-source-id: 6ddf82773473646dbbc1284ae601a78c4907c778
Summary:
Red diff to remove existing implementation of garbage collection. The current approach is reference counting kind of approach and require a lot of effort to get the size counter right on compaction and deletion. I'm going to go with a simple mark-sweep kind of approach and will send another PR for that.
CompactionEventListener was added solely for blob db and it adds complexity and overhead to compaction iterator. Removing it as well.
Closes https://github.com/facebook/rocksdb/pull/3551
Differential Revision: D7130190
Pulled By: yiwu-arbug
fbshipit-source-id: c3a375ad2639a3f6ed179df6eda602372cc5b8df
Summary:
The recent Logger::Close() and DBImpl::Close() implementation rely on
calling the CloseImpl() virtual function from the destructor, which will
not work. Refactor the implementation to have a private close helper
function in derived classes that can be called by both CloseImpl() and
the destructor.
Closes https://github.com/facebook/rocksdb/pull/3528
Reviewed By: gfosco
Differential Revision: D7049303
Pulled By: anand1976
fbshipit-source-id: 76a64cbf403209216dfe4864ecf96b5d7f3db9f4
Summary:
Deadlock: a memtable flush holds DB::mutex_ and calls ThreadLocalPtr::Scrape(), which locks ThreadLocalPtr mutex; meanwhile, a thread exit handler locks ThreadLocalPtr mutex and calls SuperVersionUnrefHandle, which tries to lock DB::mutex_.
This deadlock is hit all the time on our workload. It blocks our release.
In general, the problem is that ThreadLocalPtr takes an arbitrary callback and calls it while holding a lock on a global mutex. The same global mutex is (at least in some cases) locked by almost all ThreadLocalPtr methods, on any instance of ThreadLocalPtr. So, there'll be a deadlock if the callback tries to do anything to any instance of ThreadLocalPtr, or waits for another thread to do so.
So, probably the only safe way to use ThreadLocalPtr callbacks is to do only do simple and lock-free things in them.
This PR fixes the deadlock by making sure that local_sv_ never holds the last reference to a SuperVersion, and therefore SuperVersionUnrefHandle never has to do any nontrivial cleanup.
I also searched for other uses of ThreadLocalPtr to see if they may have similar bugs. There's only one other use, in transaction_lock_mgr.cc, and it looks fine.
Closes https://github.com/facebook/rocksdb/pull/3510
Reviewed By: sagar0
Differential Revision: D7005346
Pulled By: al13n321
fbshipit-source-id: 37575591b84f07a891d6659e87e784660fde815f
Summary:
Calling `std::vector::reserve()` causes memory to be reallocated and then data to be moved. It was called prior to adding every block. This reallocation could be done a huge amount of times, e.g., for users with large index blocks.
Instead, we can simply use `std::vector::emplace_back()` in such a way that preserves the no-memory-leak guarantee, while letting the vector decide when to reallocate space. Now I see reallocation/moving happen O(logN) times, rather than O(N) times, where N is the final size of vector.
Closes https://github.com/facebook/rocksdb/pull/3508
Differential Revision: D6994228
Pulled By: ajkr
fbshipit-source-id: ab7c11e13ff37c8c6c8249be7a79566a4068cd27
Summary:
- removed a few unneeded variables
- fused some variable declarations and their assignments
- fixed right-trimming code in string_util.cc to not underflow
- simplifed an assertion
- move non-nullptr check assertion before dereferencing of that pointer
- pass an std::string function parameter by const reference instead of by value (avoiding potential copy)
Closes https://github.com/facebook/rocksdb/pull/3507
Differential Revision: D7004679
Pulled By: sagar0
fbshipit-source-id: 52944952d9b56dfcac3bea3cd7878e315bb563c4
Summary:
We don't do fsync() after truncate in direct I/O writeable file (in fact we don't do any fsync ever). This can cause metadata not persistent to disk after the file is generated. We call it instead.
Closes https://github.com/facebook/rocksdb/pull/3500
Differential Revision: D6981482
Pulled By: siying
fbshipit-source-id: 7e2b591b7e5dd1b96fc0775515b8b9e6092980ef
Summary:
Now we suppress alignment UBSAN error as a whole. Suppressing 3-way CRC and murmurhash feels a better idea than turning off alignment check as a whole.
Closes https://github.com/facebook/rocksdb/pull/3495
Differential Revision: D6971273
Pulled By: siying
fbshipit-source-id: 080b59fed6df494b9f622ef7cb5d42d39e6a8cdf
Summary:
ForwardIterator::SVCleanup() sometimes didn't pin superversion when it was supposed to. See the added test for the scenario. Here's the ASAN output of the added test without the fix (using `COMPILE_WITH_ASAN=1 make`): https://pastebin.com/9rD0Ywws
Closes https://github.com/facebook/rocksdb/pull/3415
Differential Revision: D6817414
Pulled By: al13n321
fbshipit-source-id: bc80c44ea78a3a1fa885dfa448a26111f91afb24
Summary:
`ReadaheadRandomAccessFile` is used by iterators for file reads in several cases, like in compaction when `compaction_readahead_size > 0` or `use_direct_io_for_flush_and_compaction == true`, or in user iterator when `ReadOptions::readahead_size > 0`. `ReadaheadRandomAccessFile` maintains an internal buffer for readahead data. It assumes that, if the buffer's length is less than `ReadaheadRandomAccessFile::readahead_size_`, which is fixed in the constructor, then EOF has been reached so it doesn't try reading further.
Recently, d938226af4 started calling `RandomAccessFile::Prefetch` with various lengths: 8KB, 16KB, etc. When the `RandomAccessFile` is a `ReadaheadRandomAccessFile`, it triggers the above condition and incorrectly determines EOF. If a block is partially in the readahead buffer and EOF is incorrectly decided, the result is a truncated data block.
The problem is reproducible:
```
TEST_TMPDIR=/data/compaction_bench ./db_bench -benchmarks=fillrandom -write_buffer_size=1048576 -target_file_size_base=1048576 -block_size=18384 -use_direct_io_for_flush_and_compaction=true
...
put error: Corruption: truncated block read from /data/compaction_bench/dbbench/000014.sst offset 20245, expected 10143 bytes, got 8427
```
Closes https://github.com/facebook/rocksdb/pull/3454
Differential Revision: D6869405
Pulled By: ajkr
fbshipit-source-id: 87001c299e7600a37c0dcccbd0368e0954c929cf
Summary:
FilePrefetchBuffer::Prefetch is currently rounds the offset up which does not fit its new use cases in prefetching index/filter blocks, as it would skips over some the offsets that were requested to be prefetched. This patch rounds down instead.
Fixes#3180
Closes https://github.com/facebook/rocksdb/pull/3413
Differential Revision: D6816392
Pulled By: maysamyabandeh
fbshipit-source-id: 3aaeaf59c55d72b61dacfae6d4a8e65eccb3c553
Summary:
Currently, the only way to close an open DB is to destroy the DB
object. There is no way for the caller to know the status. In one
instance, the destructor encountered an error due to failure to
close a log file on HDFS. In order to prevent silent failures, we add
DB::Close() that calls CloseImpl() which must be implemented by its
descendants.
The main failure point in the destructor is closing the log file. This
patch also adds a Close() entry point to Logger in order to get status.
When DBOptions::info_log is allocated and owned by the DBImpl, it is
explicitly closed by DBImpl::CloseImpl().
Closes https://github.com/facebook/rocksdb/pull/3348
Differential Revision: D6698158
Pulled By: anand1976
fbshipit-source-id: 9468e2892553eb09c4c41b8723f590c0dbd8ab7d
Summary:
This fixes the following warnings when compiled with GCC7:
util/transaction_test_util.cc: In static member function ‘static rocksdb::Status rocksdb::RandomTransactionInserter::DBGet(rocksdb::DB*, rocksdb::Transaction*, rocksdb::ReadOptions&, uint16_t, uint64_t, bool, uint64_t*, std::__cxx11::string*, bool*)’:
util/transaction_test_util.cc:75:8: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
Status RandomTransactionInserter::DBGet(
^~~~~~~~~~~~~~~~~~~~~~~~~
util/transaction_test_util.cc:84:11: note: ‘snprintf’ output between 5 and 6 bytes into a destination of size 5
snprintf(prefix_buf, sizeof(prefix_buf), "%.4u", set_i + 1);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/transaction_test_util.cc: In static member function ‘static rocksdb::Status rocksdb::RandomTransactionInserter::Verify(rocksdb::DB*, uint16_t, uint64_t, bool, rocksdb::Random64*)’:
util/transaction_test_util.cc:245:8: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
Status RandomTransactionInserter::Verify(DB* db, uint16_t num_sets,
^~~~~~~~~~~~~~~~~~~~~~~~~
util/transaction_test_util.cc:268:13: note: ‘snprintf’ output between 5 and 6 bytes into a destination of size 5
snprintf(prefix_buf, sizeof(prefix_buf), "%.4u", set_i + 1);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Closes https://github.com/facebook/rocksdb/pull/3295
Differential Revision: D6609411
Pulled By: maysamyabandeh
fbshipit-source-id: 33f0add471056eb59db2f8bd4366e6dfbb1a187d
Summary:
**# Summary**
RocksDB uses SSE crc32 intrinsics to calculate the crc32 values but it does it in single way fashion (not pipelined on single CPU core). Intel's whitepaper () published an algorithm that uses 3-way pipelining for the crc32 intrinsics, then use pclmulqdq intrinsic to combine the values. Because pclmulqdq has overhead on its own, this algorithm will show perf gains on buffers larger than 216 bytes, which makes RocksDB a perfect user, since most of the buffers RocksDB call crc32c on is over 4KB. Initial db_bench show tremendous CPU gain.
This change uses the 3-way SSE algorithm by default. The old SSE algorithm is now behind a compiler tag NO_THREEWAY_CRC32C. If user compiles the code with NO_THREEWAY_CRC32C=1 then the old SSE Crc32c algorithm would be used. If the server does not have SSE4.2 at the run time the slow way (Non SSE) will be used.
**# Performance Test Results**
We ran the FillRandom and ReadRandom benchmarks in db_bench. ReadRandom is the point of interest here since it calculates the CRC32 for the in-mem buffers. We did 3 runs for each algorithm.
Before this change the CRC32 value computation takes about 11.5% of total CPU cost, and with the new 3-way algorithm it reduced to around 4.5%. The overall throughput also improved from 25.53MB/s to 27.63MB/s.
1) ReadRandom in db_bench overall metrics
PER RUN
Algorithm | run | micros/op | ops/sec |Throughput (MB/s)
3-way | 1 | 4.143 | 241387 | 26.7
3-way | 2 | 3.775 | 264872 | 29.3
3-way | 3 | 4.116 | 242929 | 26.9
FastCrc32c|1 | 4.037 | 247727 | 27.4
FastCrc32c|2 | 4.648 | 215166 | 23.8
FastCrc32c|3 | 4.352 | 229799 | 25.4
AVG
Algorithm | Average of micros/op | Average of ops/sec | Average of Throughput (MB/s)
3-way | 4.01 | 249,729 | 27.63
FastCrc32c | 4.35 | 230,897 | 25.53
2) Crc32c computation CPU cost (inclusive samples percentage)
PER RUN
Implementation | run | TotalSamples | Crc32c percentage
3-way  | 1  | 4,572,250,000 | 4.37%
3-way  | 2  | 3,779,250,000 | 4.62%
3-way  | 3  | 4,129,500,000 | 4.48%
FastCrc32c   | 1  | 4,663,500,000 | 11.24%
FastCrc32c   | 2  | 4,047,500,000 | 12.34%
FastCrc32c   | 3  | 4,366,750,000 | 11.68%
**# Test Plan**
make -j64 corruption_test && ./corruption_test
By default it uses 3-way SSE algorithm
NO_THREEWAY_CRC32C=1 make -j64 corruption_test && ./corruption_test
make clean && DEBUG_LEVEL=0 make -j64 db_bench
make clean && DEBUG_LEVEL=0 NO_THREEWAY_CRC32C=1 make -j64 db_bench
Closes https://github.com/facebook/rocksdb/pull/3173
Differential Revision: D6330882
Pulled By: yingsu00
fbshipit-source-id: 8ec3d89719533b63b536a736663ca6f0dd4482e9
Summary:
added `ThreadType::BOTTOM_PRIORITY` which is used in the `ThreadStatus` object to indicate the thread is used for bottom-pri compactions. Previously there was a bug where we mislabeled such threads as `ThreadType::LOW_PRIORITY`.
Closes https://github.com/facebook/rocksdb/pull/3270
Differential Revision: D6559428
Pulled By: ajkr
fbshipit-source-id: 96b1a50a9c19492b1a5fd1b77cf7061a6f9f1d1c
Summary:
There were a few places where MSVC's implicit truncation warnings were getting triggered, which was causing the MSVC build to fail due to warnings being treated as errors. This resolves the issues by making the truncations in some places explicit, and by making it so there are no truncations of literals.
Fixes#3239
Supersedes #3259
Closes https://github.com/facebook/rocksdb/pull/3273
Reviewed By: yiwu-arbug
Differential Revision: D6569204
Pulled By: Orvid
fbshipit-source-id: c188cf1cf98d9acb6d94b71875041cc81f8ff088
Summary:
DeleteScheduler::MarkAsTrash() don't handle existing .trash files correctly
This cause rocksdb to not being able to delete existing .trash files on restart
Closes https://github.com/facebook/rocksdb/pull/3261
Differential Revision: D6548003
Pulled By: IslamAbdelRahman
fbshipit-source-id: c3800639412e587a690062c63076a5a08881e0e6
Summary:
I started adding gflags support for cmake on linux and got frustrated that I'd need to duplicate the build_detect_platform logic, which determines namespace based on attempting compilation. We can do it differently -- use the GFLAGS_NAMESPACE macro if available, and if not, that indicates it's an old gflags version without configurable namespace so we can simply hardcode "google".
Closes https://github.com/facebook/rocksdb/pull/3212
Differential Revision: D6456973
Pulled By: ajkr
fbshipit-source-id: 3e6d5bde3ca00d4496a120a7caf4687399f5d656
Summary:
Allow users to configure the trash-to-DB size ratio limit, so
that ratelimits for deletes can be enforced even when larger portions of
the database are being deleted.
Closes https://github.com/facebook/rocksdb/pull/3158
Differential Revision: D6304897
Pulled By: gdavidsson
fbshipit-source-id: a28dd13059ebab7d4171b953ed91ce383a84d6b3
Summary:
This confused some users who were getting compression type from the logs.
Closes https://github.com/facebook/rocksdb/pull/3153
Differential Revision: D6294964
Pulled By: ajkr
fbshipit-source-id: 3c813376d33682dc6ccafc9a78df1a2e2528985e
Summary:
The current implementation of PinnableSlice move assignment have an issue #3163. We are moving away from it instead of try to get the move assignment right, since it is too tricky.
Closes https://github.com/facebook/rocksdb/pull/3164
Differential Revision: D6319201
Pulled By: yiwu-arbug
fbshipit-source-id: 8f3279021f3710da4a4caa14fd238ed2df902c48
Summary:
After move assignment, we need to re-initialized the moved PinnableSlice.
Also update blob_db_impl.cc to not reuse the moved PinnableSlice since it is supposed to be in an undefined state after move.
Closes https://github.com/facebook/rocksdb/pull/3127
Differential Revision: D6238585
Pulled By: yiwu-arbug
fbshipit-source-id: bd99f2e37406c4f7de160c7dee6a2e8126bc224e
Summary:
util/concurrent_arena.h:
CID 1396145 (#1 of 1): Uninitialized pointer field (UNINIT_CTOR)
2. uninit_member: Non-static class member free_begin_ is not initialized in this constructor nor in any functions that it calls.
94 Shard() : allocated_and_unused_(0) {}
util/dynamic_bloom.cc:
1. Condition hash_func == NULL, taking true branch.
CID 1322821 (#1 of 1): Uninitialized pointer field (UNINIT_CTOR)
3. uninit_member: Non-static class member data_ is not initialized in this constructor nor in any functions that it calls.
47 hash_func_(hash_func == nullptr ? &BloomHash : hash_func) {}
48
util/file_reader_writer.h:
204 private:
205 AlignedBuffer buffer_;
member_not_init_in_gen_ctor: The compiler-generated constructor for this class does not initialize buffer_offset_.
206 uint64_t buffer_offset_;
CID 1418246 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
member_not_init_in_gen_ctor: The compiler-generated constructor for this class does not initialize buffer_len_.
207 size_t buffer_len_;
208};
util/thread_local.cc:
341#endif
CID 1322795 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
3. uninit_member: Non-static class member pthread_key_ is not initialized in this constructor nor in any functions that it calls.
342}
40struct ThreadData {
2. uninit_member: Non-static class member next is not initialized in this constructor nor in any functions that it calls.
CID 1400668 (#1 of 1): Uninitialized pointer field (UNINIT_CTOR)
4. uninit_member: Non-static class member prev is not initialized in this constructor nor in any functions that it calls.
41 explicit ThreadData(ThreadLocalPtr::StaticMeta* _inst) : entries(), inst(_inst) {}
42 std::vector<Entry> entries;
1. member_decl: Class member declaration for next.
43 ThreadData* next;
3. member_decl: Class member declaration for prev.
44 ThreadData* prev;
45 ThreadLocalPtr::StaticMeta* inst;
46};
Closes https://github.com/facebook/rocksdb/pull/3123
Differential Revision: D6233566
Pulled By: sagar0
fbshipit-source-id: aa2068790ea69787a0035c0db39d59b0c25108db
Summary:
Instead of using samples directly, we now support passing the samples through zstd's dictionary generator when `CompressionOptions::zstd_max_train_bytes` is set to nonzero. If set to zero, we will use the samples directly as the dictionary -- same as before.
Note this is the first step of #2987, extracted into a separate PR per reviewer request.
Closes https://github.com/facebook/rocksdb/pull/3057
Differential Revision: D6116891
Pulled By: ajkr
fbshipit-source-id: 70ab13cc4c734fa02e554180eed0618b75255497
Summary:
SstFileManager move files that need to be deleted into a trash directory.
Deprecate this behaviour and instead add ".trash" extension to files that need to be deleted
Closes https://github.com/facebook/rocksdb/pull/2970
Differential Revision: D5976805
Pulled By: IslamAbdelRahman
fbshipit-source-id: 27374ece4315610b2792c30ffcd50232d4c9a343
Summary:
ColumnFamilyOptions::compaction_options_fifo and all its sub-fields can be set dynamically now.
Some of the ways in which the fifo compaction options can be set are:
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024}"}})`
- `SetOptions({{"compaction_options_fifo", "{ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024;ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=51;ttl=49;allow_compaction=true;}"}})`
Most of the code has been made generic enough so that it could be reused later to make universal options (and other such nested defined-types) dynamic with very few lines of parsing/serializing code changes.
Introduced a few new functions like `ParseStruct`, `SerializeStruct` and `GetStringFromStruct`.
The duplicate code in `GetStringFromDBOptions` and `GetStringFromColumnFamilyOptions` has been moved into `GetStringFromStruct`. So they become just simple wrappers now.
Closes https://github.com/facebook/rocksdb/pull/3006
Differential Revision: D6058619
Pulled By: sagar0
fbshipit-source-id: 1e8f78b3374ca5249bb4f3be8a6d3bb4cbc52f92
Summary:
When I impl my own comparator, and build in release mode.
The following compile error occurs.
undefined reference to `typeinfo for rocksdb::Comparator'
This fix allows users build with RTTI off when has their own comparator.
Closes https://github.com/facebook/rocksdb/pull/3008
Differential Revision: D6077354
Pulled By: yiwu-arbug
fbshipit-source-id: 914c26dbab72f0ad1f0e15f8666a3fb2f10bfed8
Summary:
it turns out that, with older GCC shipped from centos7, the SSE42
intrinsics are not available even with "target" specified. so we
need to pass "-msse42" for checking compiler's sse4.2 support and
for building crc32c.cc which uses sse4.2 intrinsics for crc32.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Closes https://github.com/facebook/rocksdb/pull/2950
Differential Revision: D6032298
Pulled By: siying
fbshipit-source-id: 124c946321043661b3fb0a70b6cdf4c9c5126ab4
Summary:
Dynamic adjustment of rate limit according to demand for background I/O. It increases by a factor when limiter is drained too frequently, and decreases by the same factor when limiter is not drained frequently enough. The parameters for this behavior are fixed in `GenericRateLimiter::Tune`. Other changes:
- make rate limiter's `Env*` configurable for testing
- track num drain intervals in RateLimiter so we don't have to rely on stats, which may be shared across different DB instances from the ones that share the RateLimiter.
Closes https://github.com/facebook/rocksdb/pull/2899
Differential Revision: D5858704
Pulled By: ajkr
fbshipit-source-id: cc2bac30f85e7f6fd63655d0a6732ef9ed7403b1
Summary:
Previously the thread pool might be non-empty after joining since concurrent submissions could spawn new threads. This problem didn't affect our background flush/compaction thread pools because the `shutting_down_` flag prevented new jobs from being submitted during/after joining. But I wanted to be able to reuse the `ThreadPool` without such external synchronization.
Closes https://github.com/facebook/rocksdb/pull/2953
Differential Revision: D5951920
Pulled By: ajkr
fbshipit-source-id: 0efec7d0056d36d1338367da75e8b0c089bbc973
Summary:
Merging iterator invokes InternalKeyComparator.Compare() frequently to heap merge. By making InternalKeyComparator final and merging iterator to directly use InternalKeyComparator rather than through Iterator interface, we can give compiler a choice to avoid one more virtual function call if possible. I ran readseq benchmark in memory-only use case to make sure the performance at least doesn't regress.
I have to disable the final key word in debug build, as a hack test class depends on overriding the class.
Closes https://github.com/facebook/rocksdb/pull/2860
Differential Revision: D5800461
Pulled By: siying
fbshipit-source-id: ab876f22a09bb5c560740911412336e0e25ccb53
Summary:
if we enable SSE42 globally when compiling the tree for preparing a
portable binary, which could be running on CPU w/o SSE42 instructions
even the GCC on the building host is able to emit SSE42 code, this leads
to illegal instruction errors on machines not supporting SSE42. to solve
this problem, crc32 detects the supported instruction at runtime, and
selects the supported CRC32 implementation according to the result of
`cpuid`. but intrinics like "_mm_crc32_u64()" will not be available
unless the "target" machine is appropriately specified in the command
line, like "-msse42", or using the "target" attribute.
we could pass "-msse42" only when compiling crc32c.cc, and allow the
compiler to generate the SSE42 instructions, but we are still at the
risk of executing illegal instructions on machines does not support
SSE42 if the compiler emits code that is not guarded by our runtime
detection. and we need to do the change in both Makefile and CMakefile.
or, we can use GCC's "target" attribute to enable the machine specific
instructions on certain function. in this way, we have finer grained
control of the used "target". and no need to change the makefiles. so
we don't need to duplicate the changes on both makefile and cmake as
the previous approach.
this problem surfaces when preparing a package for GNU/Linux distribution,
and we only applies to optimization for SSE42, so using a feature
only available on GCC/Clang is not that formidable.
Closes https://github.com/facebook/rocksdb/pull/2807
Differential Revision: D5786084
Pulled By: siying
fbshipit-source-id: bca5c0f877b8d6fb55f58f8f122254a26422843d
Summary:
Right now, if direct I/O is enabled, prefetching the last 512KB cannot be applied, except compaction inputs or readahead is enabled for iterators. This can create a lot of I/O for HDD cases. To solve the problem, the 512KB is prefetched in block based table if direct I/O is enabled. The prefetched buffer is passed in totegher with random access file reader, so that we try to read from the buffer before reading from the file. This can be extended in the future to support flexible user iterator readahead too.
Closes https://github.com/facebook/rocksdb/pull/2708
Differential Revision: D5593091
Pulled By: siying
fbshipit-source-id: ee36ff6d8af11c312a2622272b21957a7b5c81e7
Summary:
When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs.
This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions.
- Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads.
- Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default.
- Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic.
- Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`).
- Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free.
Closes https://github.com/facebook/rocksdb/pull/2580
Differential Revision: D5422916
Pulled By: ajkr
fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
Summary:
Replace dynamic_cast<> so that users can choose to build with RTTI off, so that they can save several bytes per object, and get tiny more memory available.
Some nontrivial changes:
1. Add Comparator::GetRootComparator() to get around the internal comparator hack
2. Add the two experiemental functions to DB
3. Add TableFactory::GetOptionString() to avoid unnecessary casting to get the option string
4. Since 3 is done, move the parsing option functions for table factory to table factory files too, to be symmetric.
Closes https://github.com/facebook/rocksdb/pull/2645
Differential Revision: D5502723
Pulled By: siying
fbshipit-source-id: fd13cec5601cf68a554d87bfcf056f2ffa5fbf7c
Summary:
This fixes OOMs that we (logdevice) are currently having in production.
SkipListRep constructor does a couple small allocations from ConcurrentArena (see InlineSkipList constructor). ConcurrentArena would sometimes allocate an entire block for that, which is a few megabytes (we use Options::arena_block_size = 4 MB). So an empty memtable can take take 4 MB of memory. We have ~40k column families (spread across 15 DB instances), so 4 MB per empty memtable easily OOMs a machine for us.
This PR makes ConcurrentArena always allocate from Arena's inline block when possible. So as long as InlineSkipList's initial allocations are below 2 KB there would be no blocks allocated for empty memtables.
Closes https://github.com/facebook/rocksdb/pull/2569
Differential Revision: D5404029
Pulled By: al13n321
fbshipit-source-id: 568ec22a3fd1a485c06123f6b2dfc5e9ef67cd23
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
In this test we are deleting 100 files, and we are expecting DeleteScheduler to delete 26 files in the background and 74 files immediately in the foreground
The main purpose of the test is to make sure that we delete files in foreground thread, which is verified in line 546
But sometimes we may end up with 26 files or 25 files in the trash directory because the background thread may be slow and not be able to delete the first file fast enough, so sometimes this test fail.
Remove
```
ASSERT_EQ(CountFilesInDir(trash_dir_), 25);
```
Since it does not have any benefit any way
Closes https://github.com/facebook/rocksdb/pull/2618
Differential Revision: D5458674
Pulled By: IslamAbdelRahman
fbshipit-source-id: 5556a9edfa049db71dce80b8e6ae0fdd25e1e74e
Summary:
Instead of ignoring UBSan checks, fix the negative shifts in
Hash(). Also add test to make sure the hash values are stable over
time. The values were computed before this change, so the test also
verifies the correctness of the change.
Closes https://github.com/facebook/rocksdb/pull/2546
Differential Revision: D5386369
Pulled By: yiwu-arbug
fbshipit-source-id: 6de4b44461a544d6222cc5d72d8cda2c0373d17e
Summary:
Currently metadata_block_size controls only index partition size. With this patch a partition is cut after any of index or filter partitions reaches metadata_block_size.
Closes https://github.com/facebook/rocksdb/pull/2452
Differential Revision: D5275651
Pulled By: maysamyabandeh
fbshipit-source-id: 5057e4424b4c8902043782e6bf8c38f0c4f25160
Summary:
We've got some DBs where iterators return Status with message "Corruption: block checksum mismatch" all the time. That's not very informative. It would be much easier to investigate if the error message contained the file name - then we would know e.g. how old the corrupted file is, which would be very useful for finding the root cause. This PR adds file name, offset and other stuff to some block corruption-related status messages.
It doesn't improve all the error messages, just a few that were easy to improve. I'm mostly interested in "block checksum mismatch" and "Bad table magic number" since they're the only corruption errors that I've ever seen in the wild.
Closes https://github.com/facebook/rocksdb/pull/2507
Differential Revision: D5345702
Pulled By: al13n321
fbshipit-source-id: fc8023d43f1935ad927cef1b9c55481ab3cb1339
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
Make default impl return NoSupported so the db_blob
tests exist in a meaningful manner.
Replace std::thread to port::Thread
Closes https://github.com/facebook/rocksdb/pull/2465
Differential Revision: D5275563
Pulled By: yiwu-arbug
fbshipit-source-id: cedf1a18a2c05e20d768c1308b3f3224dbd70ab6
Summary:
RateLimiterTest.Rate test has been failing continuously since many days on travis in Mac OSX PLATFORM_DEPENDENT test suite.
Check https://travis-ci.org/facebook/rocksdb/pull_requests.
Disabling this test for now, so that we can investigate more in depth.
Closes https://github.com/facebook/rocksdb/pull/2451
Differential Revision: D5250147
Pulled By: sagar0
fbshipit-source-id: d58476a3c2792d20e875754d1516c4bc7174e86c
Summary:
Allow users to rate limit background work based on read bytes, written bytes, or sum of read and written bytes. Support these by changing the RateLimiter API, so no additional options were needed.
Closes https://github.com/facebook/rocksdb/pull/2433
Differential Revision: D5216946
Pulled By: ajkr
fbshipit-source-id: aec57a8357dbb4bfde2003261094d786d94f724e
Summary:
Currently for direct I/O, the large maximum buffer is always allocated. This will be wasteful if users flush the data in much smaller chunks. This diff fix this by changing the behavior of incremental buffer works. When we enlarge buffer, we try to copy the existing data in the buffer to the enlarged buffer, rather than flush the buffer first. This can make sure that no extra I/O is introduced because of buffer enlargement.
Closes https://github.com/facebook/rocksdb/pull/2403
Differential Revision: D5178403
Pulled By: siying
fbshipit-source-id: a8fe1e7304bdb8cab2973340022fe80ff83449fd
Summary:
If ReadOptions.low_pri=true and compaction is behind, the write will either return immediate or be slowed down based on ReadOptions.no_slowdown.
Closes https://github.com/facebook/rocksdb/pull/2369
Differential Revision: D5127619
Pulled By: siying
fbshipit-source-id: d30e1cff515890af0eff32dfb869d2e4c9545eb0
Summary:
… headers
https://github.com/facebook/rocksdb/pull/2199 should not reference RocksDB-specific macros (like ROCKSDB_SUPPORT_THREAD_LOCAL in this case) to public headers, `iostats_context.h` and `perf_context.h`. We shouldn't do that because users have to provide these compiler flags when building their binary with RocksDB.
We should hide the thread local global variable inside our implementation and just expose a function api to retrieve these variables. It may break some users for now but good for long term.
make check -j64
Closes https://github.com/facebook/rocksdb/pull/2380
Differential Revision: D5177896
Pulled By: lightmark
fbshipit-source-id: 6fcdfac57f2e2dcfe60992b7385c5403f6dcb390
Summary:
Improve write buffer manager in several ways:
1. Size is tracked when arena block is allocated, rather than every allocation, so that it can better track actual memory usage and the tracking overhead is slightly lower.
2. We start to trigger memtable flush when 7/8 of the memory cap hits, instead of 100%, and make 100% much harder to hit.
3. Allow a cache object to be passed into buffer manager and the size allocated by memtable can be costed there. This can help users have one single memory cap across block cache and memtable.
Closes https://github.com/facebook/rocksdb/pull/2350
Differential Revision: D5110648
Pulled By: siying
fbshipit-source-id: b4238113094bf22574001e446b5d88523ba00017
Summary:
It's hard for RocksDB to come up with a good default of delayed write rate. Use rate given by rate limiter if it is availalbe. This provides the I/O order of magnitude.
Closes https://github.com/facebook/rocksdb/pull/2357
Differential Revision: D5115324
Pulled By: siying
fbshipit-source-id: 341065ad2211c981fc804011c0f0e59a50c7e754
Summary:
Previously users could set `max_background_flushes=0` to force rocksdb to use a single thread pool for both background flushes and compactions. That'll no longer be possible since I'm going to deprecate `max_background_flushes` and `max_background_compactions` in favor of a single option. This diff introduces a new way to force a single thread pool: when high-pri pool has zero threads, all background jobs will be submitted to low-pri pool.
Note the majority of the code change is adding `Env::GetBackgroundThreads()`, which is necessary to check whether the user has provided a zero-sized thread pool.
Closes https://github.com/facebook/rocksdb/pull/2204
Differential Revision: D4936256
Pulled By: ajkr
fbshipit-source-id: 929a07a0c0705f7766f5339cd013ff74e90d6e01
Summary:
This diff changes `StatisticsImpl` from a thread-local approach to a core-local one. The goal is to perform faster aggregations, particularly for applications that have many threads. There should be no behavior change.
Closes https://github.com/facebook/rocksdb/pull/2258
Differential Revision: D5016258
Pulled By: ajkr
fbshipit-source-id: 7d4d165b4a91d8110f0409d113d1be91f22d31a9
Summary:
Disable direct reads for log and manifest. Direct reads should not affect sequential_file
Also add kDirectIO for option_config_ in db_test_util
Closes https://github.com/facebook/rocksdb/pull/2337
Differential Revision: D5100261
Pulled By: lightmark
fbshipit-source-id: 0ebfd13b93fa1b8f9acae514ac44f8125a05868b
Summary:
unity test will fail even if we have the same function names in different anonymous namespaces in different files.
Closes https://github.com/facebook/rocksdb/pull/2321
Differential Revision: D5083783
Pulled By: lightmark
fbshipit-source-id: 1347aaf866900af30d23cdd4f29c1b96f17352af
Summary:
We've had a couple CockroachDB users fail to build RocksDB on exotic platforms, so I figured I'd try my hand at solving these issues upstream. The problems stem from a) `USE_SSE=1` being too aggressive about turning on SSE4.2, even on toolchains that don't support SSE4.2 and b) RocksDB attempting to detect support for thread-local storage based on OS, even though it can vary by compiler on the same OS.
See the individual commit messages for details. Regarding SSE support, this PR should change virtually nothing for non-CMake based builds. `make`, `PORTABLE=1 make`, `USE_SSE=1 make`, and `PORTABLE=1 USE_SSE=1 make` function exactly as before, except that SSE support will be automatically disabled when a simple SSE4.2-using test program fails to compile, as it does on OpenBSD. (OpenBSD's ports GCC supports SSE4.2, but its binutils do not, so `__SSE_4_2__` is defined but an SSE4.2-using program will fail to assemble.) A warning is emitted in this case. The CMake build is modified to support the same set of options, except that `USE_SSE` is spelled `FORCE_SSE42` because `USE_SSE` is rather useless now that we can automatically detect SSE support, and I figure changing options in the CMake build is less disruptive than changing the non-CMake build.
I've tested these changes on all the platforms I can get my hands on (macOS, Windows MSVC, Windows MinGW, and OpenBSD) and it all works splendidly. Let me know if there's anything you object to—I obviously don't mean to break any of your build pipelines in the process of fixing ours downstream.
Closes https://github.com/facebook/rocksdb/pull/2199
Differential Revision: D5054042
Pulled By: yiwu-arbug
fbshipit-source-id: 938e1fc665c049c02ae15698e1409155b8e72171
Summary:
try to clean up the type conversions and hope it passes on windows.
one interesting thing I learned is that bitshift operations are special: in `x << y`, the result type depends only on the type of `x`, unlike most arithmetic operations where the result type depends on both operands' types.
Closes https://github.com/facebook/rocksdb/pull/2277
Differential Revision: D5050145
Pulled By: ajkr
fbshipit-source-id: f3309e77526ac9612c632bf93a62d99757af9a29
Summary:
Moved the logic for core-local array out of ConcurrentArena and into a separate class because I want to reuse it for core-local stats.
Closes https://github.com/facebook/rocksdb/pull/2256
Differential Revision: D5011518
Pulled By: ajkr
fbshipit-source-id: a75a7b8f7b7a42fd6273489ada405f14c6be196a
Summary:
- downcase includes for case-sensitive filesystems
- give targets the same name (librocksdb) on all platforms
With this patch it is possible to cross-compile RocksDB for Windows
from a Linux host using mingw.
cc yuslepukhin orgads
Closes https://github.com/facebook/rocksdb/pull/2107
Differential Revision: D4849784
Pulled By: siying
fbshipit-source-id: ad26ed6b4d393851aa6551e6aa4201faba82ef60
Summary:
Now if we have iterate_upper_bound set, we continue read until get a key >= upper_bound. For a lot of cases that neighboring data blocks have a user key gap between them, our index key will be a user key in the middle to get a shorter size. For example, if we have blocks:
[a b c d][f g h]
Then the index key for the first block will be 'e'.
then if upper bound is any key between 'd' and 'e', for example, d1, d2, ..., d99999999999, we don't have to read the second block and also know that we have done our iteration by reaching the last key that smaller the upper bound already.
This diff can reduce RA in most cases.
Closes https://github.com/facebook/rocksdb/pull/2239
Differential Revision: D4990693
Pulled By: lightmark
fbshipit-source-id: ab30ea2e3c6edf3fddd5efed3c34fcf7739827ff
Summary:
Remove double buffering on RandomRead on Windows.
With more logic appear in file reader/write Read no longer
obeys forwarding calls to Windows implementation.
Previously direct_io (unbuffered) was only available on Windows
but now is supported as generic.
We remove intermediate buffering on Windows.
Remove random_access_max_buffer_size option which was windows specific.
Non-zero values for that opton introduced unnecessary lock contention.
Remove Env::EnableReadAhead(), Env::ShouldForwardRawRequest() that are
no longer necessary.
Add aligned buffer reads for cases when requested reads exceed read ahead size.
Closes https://github.com/facebook/rocksdb/pull/2105
Differential Revision: D4847770
Pulled By: siying
fbshipit-source-id: 8ab48f8e854ab498a4fd398a6934859792a2788f
Summary:
�fix the buffer size in case of ppl use buffer size as their block_size.
Closes https://github.com/facebook/rocksdb/pull/2198
Differential Revision: D4956878
Pulled By: lightmark
fbshipit-source-id: 8bb0dc9c133887aadcd625d5261a3d1110b71473
Summary:
Replacement of #2147
The change was squashed due to a lot of conflicts.
Closes https://github.com/facebook/rocksdb/pull/2194
Differential Revision: D4929799
Pulled By: siying
fbshipit-source-id: 5cd49c254737a1d5ac13f3c035f128e86524c581
Summary:
prefetch some data from the end of the file for each compaction to reduce IO.
Closes https://github.com/facebook/rocksdb/pull/2149
Differential Revision: D4880576
Pulled By: lightmark
fbshipit-source-id: aa767cd1afc84c541837fbf1ad6c0d45b34d3932
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
Users usually set readahead buffer to a multiple of 4k, more than that, usually a multiple of blocks.
So previously we set real buffer size 512 * n + 4k, which may introduce an additional block reading.
Closes https://github.com/facebook/rocksdb/pull/2138
Differential Revision: D4871504
Pulled By: lightmark
fbshipit-source-id: b070faa51d92e976e8e8468c00692699e585e243
Summary:
Extend TransactionOptions to include max_write_batch_size which determines the maximum size of the writebatch representation. If memory limit is exceeded, the operation will abort with subcode kMemoryLimit.
Closes https://github.com/facebook/rocksdb/pull/2124
Differential Revision: D4861842
Pulled By: lth
fbshipit-source-id: 46fd172ea67cc90bbba829bf0d70cfab2261c161
Summary:
This is an effort to club all string related utility functions into one common place, in string_util, so that it is easier for everyone to know what string processing functions are available. Right now they seem to be spread out across multiple modules, like logging and options_helper.
Check the sub-commits for easier reviewing.
Closes https://github.com/facebook/rocksdb/pull/2094
Differential Revision: D4837730
Pulled By: sagar0
fbshipit-source-id: 344278a
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
This reverts commit 0fd574926c.
It breaks tmpfs on kernel 4.0 or earlier. We will wait for the fix before remove this part
Closes https://github.com/facebook/rocksdb/pull/2096
Differential Revision: D4839661
Pulled By: lightmark
fbshipit-source-id: 574a51f
Summary:
I've needed Env timing measurements a few times now, so finally built something for it.
Closes https://github.com/facebook/rocksdb/pull/2073
Differential Revision: D4811231
Pulled By: ajkr
fbshipit-source-id: 218a249
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
There still are many warnings (most of them about invalid printf format
for long long), but it builds if FAIL_ON_WARNINGS is disabled.
Closes https://github.com/facebook/rocksdb/pull/2052
Differential Revision: D4807355
Pulled By: siying
fbshipit-source-id: ef03786
Summary:
temporarily disable since it isn't working on travis.
Closes https://github.com/facebook/rocksdb/pull/2064
Differential Revision: D4807373
Pulled By: ajkr
fbshipit-source-id: f2bb2b0
Summary:
Operations like Seek/Next/Prev sometimes take too long to complete when there are many internal keys to be skipped. Adding an option, max_skippable_internal_keys -- which could be used to set a threshold for the maximum number of keys that can be skipped, will help to address these cases where it is much better to fail a request (as incomplete) than to wait for a considerable time for the request to complete.
This feature -- to fail an iterator seek request as incomplete, is disabled by default when max_skippable_internal_keys = 0. It is enabled only when max_skippable_internal_keys > 0.
This feature is based on the discussion mentioned in the PR https://github.com/facebook/rocksdb/pull/1084.
Closes https://github.com/facebook/rocksdb/pull/2000
Differential Revision: D4753223
Pulled By: sagar0
fbshipit-source-id: 1c973f7
Summary:
instead of thread_local
The cleanup path for the rocksdb database might not have the
thread_updater_local_cache_ pointer initialized because the thread
executing the cleanup is likely not a rocksdb thread. This results in a
memory leak detected by Valgrind. The cleanup code path should use the
thread_status_updater pointer obtained from the DB object instead of a
thread local one.
Closes https://github.com/facebook/rocksdb/pull/2059
Differential Revision: D4801611
Pulled By: hermanlee
fbshipit-source-id: 407d7de
Summary:
Currently the fast crc32 path is not enabled on Windows. I am trying to enable it here, hopefully, with the minimum impact to the existing code structure.
Closes https://github.com/facebook/rocksdb/pull/2033
Differential Revision: D4770635
Pulled By: siying
fbshipit-source-id: 676f8b8
Summary:
Allow the users to specify the target index partition size.
With this patch an index partition is cut before its estimated in-memory size goes above the configured value for metadata_block_size. The filter partitions are still cut right after an index partition is cut.
Closes https://github.com/facebook/rocksdb/pull/2041
Differential Revision: D4780216
Pulled By: maysamyabandeh
fbshipit-source-id: 95a0831
Summary:
Added fifo benchmark to db_bench.
One thing i am not sure is that i am using CompactRange() instead of CompactFiles(). (may cause performance skew because CompactionRange() is not happening in current thread?) For CompactFiles(), for some reason FIFO compaction doesn't work as expected. More insight is welcomed. I guess FIFO compaction doesn't work with file names? igorcanadi
test cmd:
./db_bench --compaction_style=2 --benchmarks=fillseqdeterministic --disable_auto_compactions --num_levels=1 --fifo_compaction_max_table_files_size_mb=10
---------------------- DB 0 LSM ---------------------
Level[0]: /000014.sst(size: 4211014 bytes)
fillseqdeterministic : 4.731 micros/op 211381 ops/sec; 23.4 MB/s
Closes https://github.com/facebook/rocksdb/pull/1734
Differential Revision: D4774964
Pulled By: siying
fbshipit-source-id: 9d08df6
Summary:
in buffered io, the filesize_ is the real size.
Closes https://github.com/facebook/rocksdb/pull/1991
Differential Revision: D4711433
Pulled By: lightmark
fbshipit-source-id: ad604b9
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
Fixing some bugs in MockEnv so it be actually used.
Closes https://github.com/facebook/rocksdb/pull/1914
Differential Revision: D4609923
Pulled By: maysamyabandeh
fbshipit-source-id: ca25735
Summary:
Without the cast, the build will break on Windows.
Closes https://github.com/facebook/rocksdb/pull/1982
Differential Revision: D4690462
Pulled By: ajkr
fbshipit-source-id: c493b6c
Summary:
This is the second split of this pull request: https://github.com/facebook/rocksdb/pull/1891 which includes only the builder part. The testing will be included in the third split, where the reader is also included.
Closes https://github.com/facebook/rocksdb/pull/1952
Differential Revision: D4660272
Pulled By: maysamyabandeh
fbshipit-source-id: 36b3cf0
Summary:
This is the metric I plan to use for adaptive rate limiting. The statistics are updated only if the rate limiter is drained by flush or compaction. I believe (but am not certain) that this is the normal case.
The Statistics object is passed in RateLimiter::Request() to avoid requiring changes to client code, which would've been necessary if we passed it in the RateLimiter constructor.
Closes https://github.com/facebook/rocksdb/pull/1946
Differential Revision: D4646489
Pulled By: ajkr
fbshipit-source-id: d8e0161
Summary:
This option is needed to be enabled for Direct IO
and I cannot think of a reason where we need to disable it
remove it and default it to true
Closes https://github.com/facebook/rocksdb/pull/1944
Differential Revision: D4641088
Pulled By: IslamAbdelRahman
fbshipit-source-id: d7085b9
Summary:
- Change data_[b] to data_[b / 8] in DynamicBloom::Prefetch, as b means the b-th bit in data_ and data_[b / 8] is the proper byte in data_.
Closes https://github.com/facebook/rocksdb/pull/1935
Differential Revision: D4628696
Pulled By: siying
fbshipit-source-id: bc5a0c6
Summary:
For the sake of making our options simpler, we should keep options.h as simple as possible and move more advanced/less common options to advaned_options.h
I started with ColumnFamilyOptions and also did some re-ordering
I have moved all ColumnFamilyOptions to advanced_options.h and only left these options in options.h
```
const Comparator* comparator = BytewiseComparator();
std::shared_ptr<MergeOperator> merge_operator = nullptr;
const CompactionFilter* compaction_filter = nullptr;
std::shared_ptr<CompactionFilterFactory> compaction_filter_factory = nullptr;
size_t write_buffer_size = 64 << 20;
CompressionType compression;
int level0_file_num_compaction_trigger = 4;
bool disable_auto_compactions = false;
```
Please feel free to comment on specific options if you think they should be advanced or should not be
Closes https://github.com/facebook/rocksdb/pull/1847
Differential Revision: D4519996
Pulled By: IslamAbdelRahman
fbshipit-source-id: abebd9a
Summary:
…action
The two options, min_partial_merge_operands and verify_checksums_in_compaction, are not seldom used. Remove them to reduce the total number of options. Also remove them from Java and C interface.
Closes https://github.com/facebook/rocksdb/pull/1902
Differential Revision: D4601219
Pulled By: siying
fbshipit-source-id: aad4cb2
Summary:
querying logical sector size from the device instead of hardcoding it for linux platform.
Closes https://github.com/facebook/rocksdb/pull/1875
Differential Revision: D4591946
Pulled By: ajkr
fbshipit-source-id: 4e9805c
Summary:
Missing this function will cause RandomAccessFileReader not doing alignment in Direct IO mode, which introduce an IOError: invalid argument.
Closes https://github.com/facebook/rocksdb/pull/1900
Differential Revision: D4601261
Pulled By: lightmark
fbshipit-source-id: c3eadf1
Summary:
we occasionally missing this call so the file size will be wrong
Closes https://github.com/facebook/rocksdb/pull/1894
Differential Revision: D4598446
Pulled By: lightmark
fbshipit-source-id: 42b6ef5
Summary:
Some places autodetected. These are the two places that didn't.
closes#1498
Still unsure if the following instances of 4 * 1024 need fixing in:
util/io_posix.h
include/rocksdb/table.h (appears to be blocksize and different)
utilities/persistent_cache/block_cache_tier.cc
utilities/persistent_cache/persistent_cache_test.h
include/rocksdb/env.h
util/env_posix.cc
db/column_family.cc
Closes https://github.com/facebook/rocksdb/pull/1499
Differential Revision: D4593640
Pulled By: yiwu-arbug
fbshipit-source-id: efc48de
Summary:
I'd like to propose a patch to expose a new IOError type with subcode kStaleFile to allow to detect when ESTALE error is returned. This allows the rocksdb consumers to handle this error separately from other IOErrors.
I've also added a missing string representation for the kDeadlock subcode, I believe calling ToString() on Status object with that subcode would result in an out of band access in the msgs array,
Please let me know if you have any questions or would like me to make any changes to this pull request.
Closes https://github.com/facebook/rocksdb/pull/1748
Differential Revision: D4387675
Pulled By: IslamAbdelRahman
fbshipit-source-id: 67feb13
Summary:
fix lite bugs
disable direct io in lite mode
Closes https://github.com/facebook/rocksdb/pull/1870
Differential Revision: D4559866
Pulled By: yiwu-arbug
fbshipit-source-id: 3761c51
Summary:
NowMicros() provides non-monotonic time. When wall clock is
synchronized or changed, the non-monotonicity time points will affect write rate
controllers. This patch changes write_controller.cc and rate_limiter.cc to use
monotonic time points.
Closes https://github.com/facebook/rocksdb/pull/1865
Differential Revision: D4561732
Pulled By: siying
fbshipit-source-id: 95ece62
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
Partition Index blocks and use a Partition-index as a 2nd level index.
The two-level index can be used by setting
BlockBasedTableOptions::kTwoLevelIndexSearch as the index type and
configuring BlockBasedTableOptions::index_per_partition
t15539501
Closes https://github.com/facebook/rocksdb/pull/1814
Differential Revision: D4473535
Pulled By: maysamyabandeh
fbshipit-source-id: bffb87e
Summary:
introduce new methods into a public threadpool interface,
- allow submission of std::functions as they allow greater flexibility.
- add Joining methods to the implementation to join scheduled and submitted jobs with
an option to cancel jobs that did not start executing.
- Remove ugly `#ifdefs` between pthread and std implementation, make it uniform.
- introduce pimpl for a drop in replacement of the implementation
- Introduce rocksdb::port::Thread typedef which is a replacement for std::thread. On Posix Thread defaults as before std::thread.
- Implement WindowsThread that allocates memory in a more controllable manner than windows std::thread with a replaceable implementation.
- should be no functionality changes.
Closes https://github.com/facebook/rocksdb/pull/1823
Differential Revision: D4492902
Pulled By: siying
fbshipit-source-id: c74cb11
Summary:
Change the default of delayed slowdown value to 16MB/s and further increase the L0 stop condition to 36 files.
Closes https://github.com/facebook/rocksdb/pull/1821
Differential Revision: D4489229
Pulled By: siying
fbshipit-source-id: 1003981
Summary:
C++11 in-class initialization is cleaner and makes it the default more explicit to our users and more visible.
Use it for ColumnFamilyOptions and DBOptions
Closes https://github.com/facebook/rocksdb/pull/1822
Differential Revision: D4490473
Pulled By: IslamAbdelRahman
fbshipit-source-id: c493a87
Summary:
The code in DBOptions::Dump is simply a duplicate of the code in ImmutableDBOptions::Dump and MutableDBOptions.Dump
consolidate duplicate code.
tested visually
Closes https://github.com/facebook/rocksdb/pull/1818
Differential Revision: D4486710
Pulled By: IslamAbdelRahman
fbshipit-source-id: 7085189
Summary:
If the users use the NewLRUCache() without passing in the number of shard bits, instead of using hard-coded 6, we'll determine it based on capacity.
Closes https://github.com/facebook/rocksdb/pull/1584
Differential Revision: D4242517
Pulled By: siying
fbshipit-source-id: 86b0f18
Summary:
For case !handle->InCache() && handle->refs >= 1 (the third case mentioned in lru_cache.h), the key was overwritten by Insert(). In this case, the refcount can still be incremented, and the cache handle will never enter LRU list. Fix Ref() logic for this case.
Closes https://github.com/facebook/rocksdb/pull/1808
Differential Revision: D4467656
Pulled By: ajkr
fbshipit-source-id: c0784d8
Summary:
The Env registration framework supports registering client Envs and selecting which one to instantiate according to a text field. This enabled things like adding the -env_uri argument to db_bench, so the same binary could be reused with different Envs just by changing CLI config.
Now this problem has come up again in a non-Env context, as I want to instantiate a client Statistics implementation from db_bench, which is configured entirely via text parameters. Also, in the future we may wish to use it for deserializing client objects when loading OPTIONS file.
This diff generalizes the Env registration logic to work with arbitrary types.
- Generalized registration and instantiation code by templating them
- The entire implementation is in a header file as that's Google style guide's recommendation for template definitions
- Pattern match with std::regex_match rather than checking prefix, which was the previous behavior
- Rename functions/files to be non-Env-specific
Closes https://github.com/facebook/rocksdb/pull/1776
Differential Revision: D4421933
Pulled By: ajkr
fbshipit-source-id: 34647d1
Summary:
If we don't wait for the threads to finish after each run, the thread queue may not be empty while the next test starts to run, which can cause unexpected behaviors.
Also make some of the relaxed read/write more restrict.
Closes https://github.com/facebook/rocksdb/pull/1590
Reviewed By: AsyncDBConnMarkedDownDBException
Differential Revision: D4245922
Pulled By: AsyncDBConnMarkedDownDBException
fbshipit-source-id: f83b74b
Summary:
If users directly call OptimizeForPointLookup(), it is broken as the option isn't compatible with parallel memtable insert. Fix it by using memtable bloomo filter instead.
Closes https://github.com/facebook/rocksdb/pull/1791
Differential Revision: D4442836
Pulled By: siying
fbshipit-source-id: bf6c9cd
Summary:
Fix the bug when sync log fail, FlushJob::Run() will not be execute and
reference to cfd->current() will not be release.
Closes https://github.com/facebook/rocksdb/pull/1792
Differential Revision: D4441316
Pulled By: yiwu-arbug
fbshipit-source-id: 5523e28
Summary:
Remove the logic since we don't use buffer cache with direct IO. Resolve
read regression we currently have.
Closes https://github.com/facebook/rocksdb/pull/1782
Differential Revision: D4430408
Pulled By: yiwu-arbug
fbshipit-source-id: 5557bba
Summary:
also change variable name `direct_io_` to `use_direct_io_` in WritableFile to make it consistent with read path.
Closes https://github.com/facebook/rocksdb/pull/1770
Differential Revision: D4416435
Pulled By: lightmark
fbshipit-source-id: 4143c53
Summary:
direct IO reads refactoring
remove unnecessary classes and unified interfaces
tested with db_bench
need more change for options and ON/OFF for different files.
Since disabled is default, it should be fine now
Closes https://github.com/facebook/rocksdb/pull/1636
Differential Revision: D4307189
Pulled By: lightmark
fbshipit-source-id: 6991e22
Summary:
…perly on travis
There is some old code in PosixWritableFile::Close(), which
truncates the file to the measured size and then does an extra fallocate
with KEEP_SIZE. This is commented as a failsafe because in some
cases ftruncate doesn't do the right job (I don't know of an instance of
this btw). However doing an fallocate with KEEP_SIZE should not increase
the file size. However on Travis Worker which is Docker (likely AUFS )
its not working. There are comments on web that show that the AUFS
author had initially not implemented fallocate, and then did it later.
So not sure what is the quality of the implementation.
Closes https://github.com/facebook/rocksdb/pull/1765
Differential Revision: D4401340
Pulled By: anirbanr-fb
fbshipit-source-id: e2d8100
Summary:
Previously the only way to increment a handle's refcount was to invoke Lookup(), which (1) did hash table lookup to get cache handle, (2) incremented that handle's refcount. For a future DeleteRange optimization, I added a function, Ref(), for when the caller already has a cache handle and only needs to do (2).
Closes https://github.com/facebook/rocksdb/pull/1761
Differential Revision: D4397114
Pulled By: ajkr
fbshipit-source-id: 9addbe5
Summary:
Enable directIO on WritableFileImpl::Append
with offset being current length of the file.
Enable UniqueID tests on Windows, disable others but
leeting them to compile. Unique tests are valuable to
detect failures on different filesystems and upcoming
ReFS.
Clear output in WinEnv Getchildren.This is different from
previous strategy, do not touch output on failure.
Make sure DBTest.OpenWhenOpen works with windows error message
Closes https://github.com/facebook/rocksdb/pull/1746
Differential Revision: D4385681
Pulled By: IslamAbdelRahman
fbshipit-source-id: c07b702
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
File copying happens when creating checkpoints and bulkloading files from different FS partition. We should fsync the files when copying them to guarantee durability. A side effect will be that the dirty pages in file system buffers won't grow too large.
Closes https://github.com/facebook/rocksdb/pull/1728
Differential Revision: D4371083
Pulled By: siying
fbshipit-source-id: 579e14c
Summary:
Improve cache options logging to info log.
Also print the value of
cache_index_and_filter_blocks_with_high_priority.
Closes https://github.com/facebook/rocksdb/pull/1709
Differential Revision: D4358776
Pulled By: yiwu-arbug
fbshipit-source-id: 8f030a0
Summary:
?e_file_max_buffer_size)
If we overwrite WritableFile and has a buffer which has the same
function of buf_. We hope remove the cache function of
WritableFileWriter. So using options.writable_file_max_buffer_size = 0
to disable cache function.
Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com>
Closes https://github.com/facebook/rocksdb/pull/1628
Differential Revision: D4307219
Pulled By: yiwu-arbug
fbshipit-source-id: 77a6e26
Summary:
Fixes compile error:
In file included from ./util/statistics.h:17:0,
from ./util/stop_watch.h:8,
from ./util/perf_step_timer.h:9,
from ./util/iostats_context_imp.h:8,
from ./util/posix_logger.h:27,
from ./port/util_logger.h:18,
from ./db/auto_roll_logger.h:15,
from db/auto_roll_logger.cc:6:
./util/thread_local.h:65:16: error: 'function' in namespace 'std' does not name a template type
typedef std::function<void(void*, void*)> FoldFunc;
Closes https://github.com/facebook/rocksdb/pull/1656
Differential Revision: D4318702
Pulled By: yiwu-arbug
fbshipit-source-id: 8c5d17a
Summary:
hopefully the last of the gcc-7 compile errors
Closes https://github.com/facebook/rocksdb/pull/1675
Differential Revision: D4332106
Pulled By: IslamAbdelRahman
fbshipit-source-id: 139448c
Summary:
fixes error (that occurred on gcc-7):
error:
util/env_basic_test.cc: In member function 'virtual rocksdb::Status rocksdb::NormalizingEnvWrapper::GetChildren(const string&, std::vector<std::__cxx11::basic_string<char> >*)':
util/env_basic_test.cc:27:21: error: 'remove_if' is not a member of 'std'
result->erase(std::remove_if(result->begin(), result->end(),
^~~
Closes https://github.com/facebook/rocksdb/pull/1674
Differential Revision: D4331221
Pulled By: ajkr
fbshipit-source-id: 9bbdc78
Summary:
util/logging.cc💯13: error: output may be truncated before the last format character [-Werror=format-length=]
std::string NumberToHumanString(int64_t num) {
^~~~~~~~~~~~~~~~~~~
util/logging.cc:106:59: note: format output between 3 and 19 bytes into a destination of size 16
snprintf(buf, sizeof(buf), "%" PRIi64 "K", num / 1000);
Closes https://github.com/facebook/rocksdb/pull/1653
Differential Revision: D4318687
Pulled By: yiwu-arbug
fbshipit-source-id: 3a5c931
Summary:
Increased buffer size to 1650.
util/histogram.cc: In member function 'std::__cxx11::string rocksdb::HistogramStat::ToString() const':
util/histogram.cc:189:13: error: '%.2f' directive output truncated writing between 4 and 313 bytes into a region of size 0 [-Werror=format-length=]
std::string HistogramStat::ToString() const {
^~~~~~~~~~~~~
util/histogram.cc:205:30: note: format output between 69 and 1614 bytes into a destination of size 200
Percentile(99.99));
^
cc1plus: all warnings being treated as errors
Makefile:1521: recipe for target 'util/histogram.o' failed
Closes https://github.com/facebook/rocksdb/pull/1660
Differential Revision: D4318820
Pulled By: yiwu-arbug
fbshipit-source-id: 45ae6ea
Summary:
It'd be nice to use the error status type to distinguish
between user error and system error. For example, GetChildren can fail
listing a backup directory's contents either because a bad path was provided
(user error) or because an operation failed, e.g., a remote storage service
call failed (system error). In the former case, we want to continue and treat
the backup directory as empty; in the latter case, we want to immediately
propagate the error to the caller.
This diff uses NotFound to indicate user error and IOError to indicate
system error. Previously IOError indicated both.
Closes https://github.com/facebook/rocksdb/pull/1644
Differential Revision: D4312157
Pulled By: ajkr
fbshipit-source-id: 51b4f24
Summary:
This is an implementation of non-exclusive locks for pessimistic transactions. It is relatively simple and does not prevent starvation (ie. it's possible that request for exclusive access will never be granted if there are always threads holding shared access). It is done by changing `KeyLockInfo` to hold an set a transaction ids, instead of just one, and adding a flag specifying whether this lock is currently held with exclusive access or not.
Some implementation notes:
- Some lock diagnostic functions had to be updated to return a set of transaction ids for a given lock, eg. `GetWaitingTxn` and `GetLockStatusData`.
- Deadlock detection is a bit more complicated since a transaction can now wait on multiple other transactions. A BFS is done in this case, and deadlock detection depth is now just a limit on the number of transactions we visit.
- Expirable transactions do not work efficiently with shared locks at the moment, but that's okay for now.
Closes https://github.com/facebook/rocksdb/pull/1573
Differential Revision: D4239097
Pulled By: lth
fbshipit-source-id: da7c074
Summary:
Made delete_obsolete_files_period_micros option dynamic. It can be updating using DB::SetDBOptions().
Closes https://github.com/facebook/rocksdb/pull/1595
Differential Revision: D4246569
Pulled By: tonek
fbshipit-source-id: d23f560
Summary:
Reduce number of comparisons in heap by caching which child node in the first level is smallest (left_child or right_child)
So next time we can compare directly against the smallest child
I see that the total number of calls to comparator drops significantly when using this optimization
Before caching (~2mil key comparison for iterating the DB)
```
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq" --db="/dev/shm/heap_opt" --use_existing_db --disable_auto_compactions --cache_size=1000000000 --perf_level=2
readseq : 0.338 micros/op 2959201 ops/sec; 327.4 MB/s user_key_comparison_count = 2000008
```
After caching (~1mil key comparison for iterating the DB)
```
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq" --db="/dev/shm/heap_opt" --use_existing_db --disable_auto_compactions --cache_size=1000000000 --perf_level=2
readseq : 0.309 micros/op 3236801 ops/sec; 358.1 MB/s user_key_comparison_count = 1000011
```
It also improves
Closes https://github.com/facebook/rocksdb/pull/1600
Differential Revision: D4256027
Pulled By: IslamAbdelRahman
fbshipit-source-id: 76fcc66
Summary:
disable UBSAN for functions with intentional left shift on -ve number / overflow
These functions are
rocksdb:: Hash
FixedLengthColBufEncoder::Append
FaultInjectionTest:: Key
Closes https://github.com/facebook/rocksdb/pull/1577
Differential Revision: D4240801
Pulled By: IslamAbdelRahman
fbshipit-source-id: 3e1caf6
Summary:
Having -ve value for max_write_buffer_number does not make sense and cause us to do a left shift on a -ve value number
Closes https://github.com/facebook/rocksdb/pull/1579
Differential Revision: D4240798
Pulled By: IslamAbdelRahman
fbshipit-source-id: bd6267e
Summary:
In one deployment we saw high latencies (presumably from slow iterator operations) and a lot of CPU time reported by perf with this stack:
```
rocksdb::MergingIterator::Next
rocksdb::DBIter::FindNextUserEntryInternal
rocksdb::DBIter::Seek
```
I think what's happening is:
1. we create a snapshot iterator,
2. we do lots of Put()s for the same key x; this creates lots of entries in memtable,
3. we seek the iterator to a key slightly smaller than x,
4. the seek walks over lots of entries in memtable for key x, skipping them because of high sequence numbers.
CC IslamAbdelRahman
Closes https://github.com/facebook/rocksdb/pull/1413
Differential Revision: D4083879
Pulled By: IslamAbdelRahman
fbshipit-source-id: a83ddae
Summary:
Current write stalling system has the problem of lacking of positive feedback if the restricted rate is already too low. Users sometimes stack in very low slowdown value. With the diff, we add a positive feedback (increasing the slowdown value) if we recover from slowdown state back to normal. To avoid the positive feedback to keep the slowdown value to be to high, we add issue a negative feedback every time we are close to the stop condition. Experiments show it is easier to reach a relative balance than before.
Also increase level0_stop_writes_trigger default from 24 to 32. Since level0_slowdown_writes_trigger default is 20, stop trigger 24 only gives four files as the buffer time to slowdown writes. In order to avoid stop in four files while 20 files have been accumulated, the slowdown value must be very low, which is amost the same as stop. It also doesn't give enough time for the slowdown value to converge. Increase it to 32 will smooth out the system.
Closes https://github.com/facebook/rocksdb/pull/1562
Differential Revision: D4218519
Pulled By: siying
fbshipit-source-id: 95e4088
Summary:
LZ4 1.7.3 emits warnings when calling the deprecated function `LZ4_compress_limitedOutput_continue()`. Starting in r129, LZ4 introduces `LZ4_compress_fast_continue()` as a replacement, and the two functions calls are [exactly equivalent](https://github.com/lz4/lz4/blob/dev/lib/lz4.c#L1408).
Closes https://github.com/facebook/rocksdb/pull/1532
Differential Revision: D4199240
Pulled By: siying
fbshipit-source-id: 138c2bc
Summary:
We should close the fd, before overriding it. This bug was
introduced by f89caa127b
Closes https://github.com/facebook/rocksdb/pull/1553
Differential Revision: D4214101
Pulled By: siying
fbshipit-source-id: 0d65de0
Summary:
- Made RangeDelAggregator's InternalKeyComparator member a reference-to-const so we don't need to copy-construct it. Also added InternalKeyComparator to ImmutableCFOptions so we don't need to construct one for each DBIter.
- Made MemTable::NewRangeTombstoneIterator and the table readers' NewRangeTombstoneIterator() functions return nullptr instead of NewEmptyInternalIterator to avoid the allocation. Updated callers accordingly.
Closes https://github.com/facebook/rocksdb/pull/1548
Differential Revision: D4208169
Pulled By: ajkr
fbshipit-source-id: 2fd65cf
Summary:
When calling StatisticsImpl::HistogramInfo::getMergedHistogram(), if
there is a dying thread, which is calling
ThreadLocalPtr::StaticMeta::OnThreadExit() to merge its thread values to
HistogramInfo, deadlock will occur. Because the former try to hold
merge_lock then ThreadMeta::mutex_, but the later try to hold
ThreadMeta::mutex_ then merge_lock. In short, the locking order isn't
the same.
This patch addressed this issue by releasing merge_lock before folding
thread values.
Closes https://github.com/facebook/rocksdb/pull/1552
Differential Revision: D4211942
Pulled By: ajkr
fbshipit-source-id: ef89bcb
Summary:
Currently, deadlock cycles are held in std::unordered_map. The problem with it is that it allocates/deallocates memory on every insertion/deletion. This limits throughput since we're doing this expensive operation while holding a global mutex. Fix this by using a vector which caches memory instead.
Running the deadlock stress test, this change increased throughput from 39k txns/s -> 49k txns/s. The effect is more noticeable in MyRocks.
Closes https://github.com/facebook/rocksdb/pull/1545
Differential Revision: D4205662
Pulled By: lth
fbshipit-source-id: ff990e4
Summary:
Currently, in the Direct I/O read mode, the last sector of the file, if not full, is not handled correctly. If the return value of pread is not multiplier of kSectorSize, we still go ahead and continue reading, even if the buffer is not aligned. With the commit, if the return value is not multiplier of kSectorSize, and all but the last sector has been read, we simply return.
Closes https://github.com/facebook/rocksdb/pull/1550
Differential Revision: D4209609
Pulled By: lightmark
fbshipit-source-id: cb0b439
Summary:
This patch clarifies the contract of PositionedAppend with some unit
tests and also implements it for PosixWritableFile. (Tasks: 14524071)
Closes https://github.com/facebook/rocksdb/pull/1514
Differential Revision: D4204907
Pulled By: maysamyabandeh
fbshipit-source-id: 06eabd2
Summary:
It is hard to measure acutal memory usage by std containers. Even
providing a custom allocator will miss count some of the usage. Here we
only do a wild guess on its memory usage.
Closes https://github.com/facebook/rocksdb/pull/1511
Differential Revision: D4179945
Pulled By: yiwu-arbug
fbshipit-source-id: 32ab929
Summary:
Currently our skip-list have an optimization to speedup sequential
inserts from a single stream, by remembering the last insert position.
We extend the idea to support sequential inserts from multiple streams,
and even tolerate small reordering wihtin each stream.
This PR is the interface part adding the following:
- Add `memtable_insert_prefix_extractor` to allow specifying prefix for each key.
- Add `InsertWithHint()` interface to memtable, to allow underlying
implementation to return a hint of insert position, which can be later
pass back to optimize inserts.
- Memtable will maintain a map from prefix to hints and pass the hint
via `InsertWithHint()` if `memtable_insert_prefix_extractor` is non-null.
Closes https://github.com/facebook/rocksdb/pull/1419
Differential Revision: D4079367
Pulled By: yiwu-arbug
fbshipit-source-id: 3555326
Summary:
This fixes a correctness issue where ranges with same begin key would overwrite each other.
This diff uses InternalKey as TombstoneMap's key such that all tombstones have unique keys even when their start keys overlap. We also update TombstoneMap to use an internal key comparator.
End-to-end tests pass and are here (https://gist.github.com/ajkr/851ffe4c1b8a15a68d33025be190a7d9) but cannot be included yet since the DeleteRange() API is yet to be checked in. Note both tests failed before this fix.
Closes https://github.com/facebook/rocksdb/pull/1484
Differential Revision: D4155248
Pulled By: ajkr
fbshipit-source-id: 304b4b9
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.
added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456
Differential Revision: D4111271
Pulled By: ajkr
fbshipit-source-id: 6e388d4
Summary:
DB Stats now are truncated if there are too many CFs. Extend the buffer size to allow more to be printed out. Also, separate out malloc to another log line.
Closes https://github.com/facebook/rocksdb/pull/1439
Differential Revision: D4100943
Pulled By: yiwu-arbug
fbshipit-source-id: 79f7218
Summary:
Rocksdb currently has many references to std::map.emplace_back()
which is not implemented in gcc 4.7, but valid in gcc 4.8. Confirmed that
it did not build with gcc 4.7, but builds fine with gcc 4.8
Closes https://github.com/facebook/rocksdb/pull/1272
Differential Revision: D4101385
Pulled By: IslamAbdelRahman
fbshipit-source-id: f6af453
* util/build_verion.cc.in: add this file, so cmake and make can share the
template file for generating util/build_version.cc.
* CMakeLists.txt: also, cmake v2.8.11 does not support file(GENERATE ...),
so we are using configure_file() for creating build_version.cc.
* Makefile: use util/build_verion.cc.in for creating build_version.cc.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Summary: Using real clock causes failures of DBSSTTest.RateLimitedDelete in some cases. Turn away from the real time. Use fake time instead.
Test Plan: Run the tests and all existing tests.
Reviewers: yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65145
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.
Test Plan: make all check -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65121
Summary:
reland https://reviews.facebook.net/D62523
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: sdong, yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65211
Summary:
In the current implementation of RateLimiter, the difference
between the configured rate and the actual rate might be more
than 20%, while our test only allows 15% difference. This diff
relaxes the acceptable bias RateLimiterTest::Rate test be 25%
to make the test less flaky.
Test Plan: rate_limiter_test
Reviewers: IslamAbdelRahman, andrewkr, yiwu, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64941
Summary: A convience method to atomically get and reset ticker count. I'm wanting to use it to have a thin wrapper to the statistics object to export ticker counts to ODS for LogDevice (since they don't even use fb303).
Test Plan:
test in LogDevice shadow cluster.
https://fburl.com/461868822
Reviewers: andrewkr, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64869
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode
Test Plan:
make check -j64
make release
Reviewers: lightmark, sdong, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64701
Summary:
I saw this exception thrown because sometimes we may resize with -ve value
if we have empty max_bytes_for_level_multiplier_additional vector
Test Plan: run the tests
Reviewers: yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64791
Hello and thank you for RocksDB,
I noticed when using log_write_bench that writes were always 88 bytes:
> strace -e trace=write ./log_write_bench -num_records 2 2>&1 | head -n 2
write(3, "\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371"..., 88) = 88
write(3, "\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371"..., 88) = 88
> strace -e trace=write ./log_write_bench -record_size 4096 -num_records 2 2>&1 | head -n 2
write(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 88) = 88
write(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 88) = 88
I think this should be:
<< record.assign('X', FLAGS_record_size);
>> record.assign(FLAGS_record_size, 'X');
So fill and not buffer. Otherwise I always see writes of size 88 (the decimal value for chr "X").
string& assign (const char* s, size_t n);
buffer - Copies the first n characters from the array of characters pointed by s.
string& assign (size_t n, char c);
fill - Replaces the current value by n consecutive copies of character c.
perl -le 'print ord "X"'
88
With the change:
> strace -e trace=write ./log_write_bench -record_size 4096 -num_records 2 2>&1 | head -n 2
write(3, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"..., 4096) = 4096
write(3, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"..., 4096) = 4096
> strace -e trace=write ./log_write_bench -num_records 2 2>&1 | head -n 2
write(3, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"..., 249) = 249
write(3, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"..., 249) = 249
Thanks.
01c27be5fbhttps://reviews.facebook.net/D16239
Summary:
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: andrewkr, yhchiang, yiwu, sdong
Reviewed By: sdong
Subscribers: hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62523
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
MyRocks build is broken because they are using "-Werror=missing-field-initializers"
We should fix that by explicitly passing these arguments
Test Plan: Build MyRocks
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64161
Summary: 0.9 can make the test flaky since just found one test fail with 0.88
Test Plan: make all check
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63939
Summary: EnvPosixTestWithParam.TwoPools relies on explicit sleeping, so it sometimes fail. Fix it.
Test Plan: Run tests with high parallelism many times and make sure the test passes.
Reviewers: yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63417
Summary: Add mutable options info into `OptionsTypeInfo` and use it to parse mutable options map. Also support `max_bytes_for_level_multiplier_additional` in option file.
Test Plan: unit test
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63843
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63945
Summary:
Add Env::RandomRWFile in env.h and implement it for POSIX
RandomRWFile is a file that allow us to read from / write to random offsets in the file
I will implement it for other Envs later after finishing the whole task for AddFile()
Test Plan: unit tests
Reviewers: andrewkr, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62433
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
Summary: Fix two Windows build problems.
Test Plan: Build on Windows and run all Linux tests.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63189
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63177
* Fix StatsLevel so that kExceptTimeForMutex leaves compression stats enabled and kExceptDetailedTimers disables mutex lock stats. Also change default stats level to kExceptDetailedTimers (disabling both compression and mutex timing).
* Changed order of StatsLevel enum to simplify logic for determining what stats to record.
Summary: To reduce number of options, merge source_compaction_factor, max_grandparent_overlap_bytes and expanded_compaction_factor into max_compaction_bytes.
Test Plan: Add two new unit tests. Run all existing tests, including jtest.
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59829
Summary: basically for SimCache stats. I find most times it is hard to pass Statistics* to SimCache constructor.
Test Plan: make all check
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62193
Summary:
To reduce contention for atomics when HistogramStats are shared across
threads, this diff makes them thread-specific so updates are faster. This comes
at the expense of slower reads (much less frequent), which now require merging
all histograms. In this diff,
- Thread-specific HistogramImpl is created upon the thread's first measureTime()
- Thread-specific HistogramImpl are merged and deleted upon thread termination or ThreadLocalPtr destruction, whichever comes first
- getHistogramString() and histogramData() merge all histograms, both thread-specific and previously merged ones
Test Plan:
unit tests, ran db_bench and verified histograms look similar
before:
$ TEST_TMPDIR=/dev/shm/ perf record -g ./db_bench --benchmarks=readwhilewriting --statistics --num=1000000 --use_existing_db --threads=64 --cache_size=250000000 --compression_type=lz4
...
+ 7.63% db_bench db_bench [.] rocksdb::HistogramStat::Add
after:
$ TEST_TMPDIR=/dev/shm/ perf record -g ./db_bench --benchmarks=readwhilewriting --statistics --num=1000000 --use_existing_db --threads=64 --cache_size=250000000 --compression_type=lz4
...
+ 0.98% db_bench db_bench [.] rocksdb::HistogramStat::Add
Reviewers: sdong, MarkCallaghan, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62649
Summary:
Fix ClockCache memory leak found by valgrind:
# Add destructor to cleanup cached values.
# Delete key with cache handle immediately after handle is recycled, and erase table entry immediately if duplicated cache entry is inserted.
Test Plan:
make DISABLE_JEMALLOC=1 valgrind_check
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62973
Summary:
Add ReadOptions::read_amp_bytes_per_bit option which allow us to create a bitmap for every data block we read
the bitmap will contain (block_size / read_amp_bytes_per_bit) bits.
We will use this bitmap to mark which bytes have been used of the block so we can calculate the read amplification
Test Plan: added new tests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: yiwu, leveldb, march, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58707
Summary:
This diff split ThreadPool to
-ThreadPool (abstract interface exposed in include/rocksdb/threadpool.h)
-ThreadPoolImpl (actual implementation in util/threadpool_imp.h)
This allow us to expose ThreadPool to the user so we can use it as an option later
Test Plan: existing unit tests
Reviewers: andrewkr, yiwu, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62085
Summary:
The global atomics we previously used for tickers had poor cache performance
since they were typically updated from different threads, causing frequent
invalidations. In this diff,
- recordTick() updates a local ticker value specific to the thread in which it was called
- When a thread exits, its local ticker value is added into merged_sum
- getTickerCount() returns the sum of all threads' local ticker values and the merged_sum
- setTickerCount() resets all threads' local ticker values and sets merged_sum to the value provided by the caller.
In a next diff I will make a similar change for histogram stats.
Test Plan:
before:
$ TEST_TMPDIR=/dev/shm/ perf record -g ./db_bench --benchmarks=readwhilewriting --statistics --num=1000000 --use_existing_db --threads=64 --cache_size=250000000 --compression_type=lz4
$ perf report -g --stdio | grep recordTick
7.59% db_bench db_bench [.] rocksdb::StatisticsImpl::recordTick
...
after:
$ TEST_TMPDIR=/dev/shm/ perf record -g ./db_bench --benchmarks=readwhilewriting --statistics --num=1000000 --use_existing_db --threads=64 --cache_size=250000000 --compression_type=lz4
$ perf report -g --stdio | grep recordTick
1.46% db_bench db_bench [.] rocksdb::StatisticsImpl::recordTick
...
Reviewers: kradhakrishnan, MarkCallaghan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: yiwu, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62337
Summary:
We used to allow insert into full block cache as long as `strict_capacity_limit=false`. This diff further restrict insert to full cache if caller don't intent to hold handle to the cache entry after insert.
Hope this diff fix the assertion failure with db_stress: https://our.intern.facebook.com/intern/sandcastle/log/?instance_id=211853102&step_id=2475070014
db_stress: util/lru_cache.cc:278: virtual void rocksdb::LRUCacheShard::Release(rocksdb::Cache::Handle*): Assertion `lru_.next == &lru_' failed.
The assertion at lru_cache.cc:278 can fail when an entry is inserted into full cache and stay in LRU list.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62325
Summary:
Add option to block based table to insert index/filter blocks to block cache with priority. Combined with LRUCache with high_pri_pool_ratio, we can reserved space for index/filter blocks, make them less likely to be evicted.
Depends on D61977.
Test Plan: See unit test.
Reviewers: lightmark, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, march, leveldb
Differential Revision: https://reviews.facebook.net/D62241
Summary:
This function allows the user to provide a custom function to fold all
threads' local data. It will be used in my next diff for aggregating statistics
stored in thread-local data. Note the test case uses atomics as thread-local
values due to the synchronization requirement (documented in code).
Test Plan: unit test
Reviewers: yhchiang, sdong, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62049
Summary:
Add mid-point insertion functionality to LRU cache. Caller of `Cache::Insert()` can set an additional parameter to make a cache entry have higher priority. The LRU cache will reserve at most `capacity * high_pri_pool_pct` bytes for high-pri cache entries. If `high_pri_pool_pct` is zero, the cache degenerates to normal LRU cache.
Context: If we are to put index and filter blocks into RocksDB block cache, index/filter block can be swap out too early. We want to add an option to RocksDB to reserve some capacity in block cache just for index/filter blocks, to mitigate the issue.
In later diffs I'll update block based table reader to use the interface to cache index/filter blocks at high priority, and expose the option to `DBOptions` and make it dynamic changeable.
Test Plan: unit test.
Reviewers: IslamAbdelRahman, sdong, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, march, leveldb
Differential Revision: https://reviews.facebook.net/D61977
Summary: 1. Range Deletion Tombstone structure 2. Modify Add() in table_builder to make it usable for adding range del tombstones 3. Expose NewTombstoneIterator() API in table_reader
Test Plan: table_test.cc (now BlockBasedTableBuilder::Add() only accepts InternalKey. I make table_test only pass InternalKey to BlockBasedTableBuidler. Also test writing/reading range deletion tombstones in table_test )
Reviewers: sdong, IslamAbdelRahman, lightmark, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61473
Summary:
Clock-based cache implemenetation aim to have better concurreny than
default LRU cache. See inline comments for implementation details.
Test Plan:
Update cache_test to run on both LRUCache and ClockCache. Adding some
new tests to catch some of the bugs that I fixed while implementing the
cache.
Reviewers: kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61647
* Create rate limiter using factory function in the test.
* Convert function local statics in option helper to a C array
that does not perform dynamic memory allocation. This is helpful
when you try to memory isolate different DB instances.
Summary: ... so that I can include the header and create LRUCache specific tests for D61977
Test Plan:
make check
Reviewers: lightmark, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62145
Summary:
Added 2 statistics in compaction job statistics, to
identify if single deletes are not meeting a matching key
(fallthrough) or single deletes are meeting a merge, delete or
another single delete (i.e. not the expected case of put).
Test Plan: Tested the statistics using write_stress and compaction_job_stats_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61749
Summary:
We were frequently seeing a race between SyncPoint::Process() and
SyncPoint::~SyncPoint() (e.g.,
https://our.intern.facebook.com/intern/sandcastle/log/?instance_id=207289975&step_id=2412725431).
The issue was marked_thread_id_ gets deleted when the main thread is exiting and
simultaneously background threads may access it. We can prevent this race
condition by checking whether sync points are disabled (assuming the test terminates
with them disabled) before attempting to access that member. I do not understand
why accesses to other members (mutex_ and enabled_) are ok but anyways the
test no longer fails tsan.
Test Plan: ran tests
Reviewers: sdong, yhchiang, IslamAbdelRahman, yiwu, wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62133
Summary:
Env holds a pointer of ThreadStatusUpdater, which will be deleted when
Env is deleted. However, in case a rocksdb database is deleted after
Env is deleted. Then this will introduce a free-after-use of this
ThreadStatusUpdater.
This patch fix this by never deleting the ThreadStatusUpdater in Env,
which is in general safe as Env is a singleton in most cases.
Test Plan: thread_list_test
Reviewers: andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59187
Summary: preparation for detecting Cache type. If SimCache, we then may trigger some command like "setSimCapacity()" with setOptions()
Test Plan: make all check
Reviewers: yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61953
Summary:
This diff improves the documentation for GetOptionsFromMap APIs and
fixes a bug in GetOptionsFromMap functions in convenience.h
where new_options will still be changed when the function
call is not successful.
Test Plan: options_test
Reviewers: IslamAbdelRahman, kradhakrishnan, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61731
From the Linux manual:
MAP_ANONYMOUS
The mapping is not backed by any file; its contents
are initialized to zero. The fd and offset arguments are
ignored; however, some implementations require fd to be -1
if MAP_ANONYMOUS (or MAP_ANON) is specified, and portable
applications should ensure this.
FreeBSD is such a case, it wil just return an error.
Summary: Implement a time series database that supports DateTieredCompactionStrategy. It wraps a db object and separate SST files in different column families (time windows).
Test Plan: Add `date_tiered_test`.
Reviewers: dhruba, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61653
Summary:
patch for diff https://reviews.facebook.net/D58587
Also change StopWatch class to add a fifth param named overwrite which decides whether to overwrite *elapse or add on it.
Test Plan: make all check -j64
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61239
Summary:
The patch is a continuation of part 5. It glues the abstraction for
file layout and metadata, and flush out the implementation of the API. It
adds unit tests for the implementation.
Test Plan: Run unit tests
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57549
Summary:
The call stack used to look like this during static initialization:
#0 0x00000000008032d1 in rocksdb::ThreadLocalPtr::StaticMeta::StaticMeta() (this=0x7ffff683b300) at util/thread_local.cc:172
#1 0x00000000008030a7 in rocksdb::ThreadLocalPtr::Instance() () at util/thread_local.cc:135
#2 0x000000000080310f in rocksdb::ThreadLocalPtr::StaticMeta::Mutex() () at util/thread_local.cc:141
#3 0x0000000000803103 in rocksdb::ThreadLocalPtr::StaticMeta::InitSingletons() () at util/thread_local.cc:139
#4 0x000000000080305d in rocksdb::ThreadLocalPtr::InitSingletons() () at util/thread_local.cc:106
It involves outer/inner classes and the call stacks goes
outer->inner->outer->inner, which is too difficult to understand. We can avoid
a level of back-and-forth by skipping StaticMeta::InitSingletons(), which
doesn't initialize anything beyond what ThreadLocalPtr::Instance() already
initializes.
Now the call stack looks like this during static initialization:
#0 0x00000000008032c5 in rocksdb::ThreadLocalPtr::StaticMeta::StaticMeta() (this=0x7ffff683b300) at util/thread_local.cc:170
#1 0x00000000008030a7 in rocksdb::ThreadLocalPtr::Instance() () at util/thread_local.cc:135
#2 0x000000000080305d in rocksdb::ThreadLocalPtr::InitSingletons() () at util/thread_local.cc:106
Test Plan:
unit tests
verify StaticMeta::mutex_ is still initialized in DefaultEnv() (StaticMeta::mutex_ is the only variable intended to be initialized via StaticMeta::InitSingletons() which I removed)
#0 0x00000000005cee17 in rocksdb::port::Mutex::Mutex(bool) (this=0x7ffff69500b0, adaptive=false) at port/port_posix.cc:52
#1 0x0000000000769cf8 in rocksdb::ThreadLocalPtr::StaticMeta::StaticMeta() (this=0x7ffff6950000) at util/thread_local.cc:168
#2 0x0000000000769a53 in rocksdb::ThreadLocalPtr::Instance() () at util/thread_local.cc:133
#3 0x0000000000769a09 in rocksdb::ThreadLocalPtr::InitSingletons() () at util/thread_local.cc:105
#4 0x0000000000647d98 in rocksdb::Env::Default() () at util/env_posix.cc:845
Reviewers: lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: arahut, IslamAbdelRahman, yiwu, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60813
Summary: Extend the option memtable_prefix_bloom_huge_page_tlb_size from just putting memtable bloom filter to huge page to memtable itself too.
Test Plan: Run all existing tests.
Reviewers: IslamAbdelRahman, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60513
Summary:
TickersNameMap is not consistent with Tickers enum.
this cause us to report wrong statistics and sometimes to access TickersNameMap outside it's boundary causing crashes (in Fb303 statistics)
Test Plan: added new unit test
Reviewers: sdong, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61083
Summary:
Persistent cache tier is the tier abstraction that can work for any block
device based device mounted on a file system. The design/implementation can
handle any generic block device.
Any generic block support is achieved by generalizing the access patten as
{io-size, q-depth, direct-io/buffered}.
We have specifically tested and adapted the IO path for NVM and SSD.
Persistent cache tier consists of there parts :
1) File layout
Provides the implementation for handling IO path for reading and writing data
(key/value pair).
2) Meta-data
Provides the implementation for handling the index for persistent read cache.
3) Implementation
It binds (1) and (2) and flushed out the PersistentCacheTier interface
This patch provides implementation for (1)(2). Follow up patch will provide (3)
and tests.
Test Plan: Compile and run check
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57117
* Added new statistics and refactored to allow ioptions to be passed around as required to access environment and statistics pointers (and, as a convenient side effect, info_log pointer).
* Prevent incrementing compression counter when compression is turned off in options.
* Prevent incrementing compression counter when compression is turned off in options.
* Added two more supported compression types to test code in db_test.cc
* Prevent incrementing compression counter when compression is turned off in options.
* Added new StatsLevel that excludes compression timing.
* Fixed casting error in coding.h
* Fixed CompressionStatsTest for new StatsLevel.
* Removed unused variable that was breaking the Linux build
Summary: Refactor cache.cc so that I can plugin clock cache (D55581). Mainly move `ShardedCache` to separate file, move `LRUHandle` back to cache.cc and rename it lru_cache.cc.
Test Plan:
make check -j64
Reviewers: lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59655
Summary: In Zlib_Compress and BZip2_Compress the calculation for size was slightly off when using compression_foramt_version 2 (which includes the decompressed size in the output). Also there were unnecessary loops around the deflate/BZ2_bzCompress calls. In Zlib_Compress there was also a possible exit from the function after calling deflateInit2 that didn't call deflateEnd.
Test Plan: Standard tests
Reviewers: sdong, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: sdong, IslamAbdelRahman, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60537
Summary:
I was investigating performance issues in the SstFileWriter and found all of the following:
- The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function.
- In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key.
- The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator.
- The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value.
- The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function.
- BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over.
- Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on.
- FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time.
- Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append().
Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9.
Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas.
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59607
Summary: this test support CLI option to select HdfsEnv/NativeHdfsEnv now. The latter one is default. add test about when Rename(src, target) should overwrite target
Test Plan: existing test
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60399
Summary:
Use @omegaga's awesome feature to avoid use of callbacks for ensuring
SyncPoints happen in a particular thread.
Depends on D60375.
Test Plan:
$ ./auto_roll_logger_test
Reviewers: omegaga, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, omegaga, leveldb
Differential Revision: https://reviews.facebook.net/D60471
Summary: Add markers to sync points. A marked sync point will only be active when it is on the same thread as the marker sync point.
Test Plan: Write a unit test to validate.
Reviewers: sdong, IslamAbdelRahman, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60375
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
Summary: LockFile is unnecessary in unit test
Test Plan: env_basic_test.cc
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60285
Summary:
Previously we couldn't run env_basic_test on Env::Default (PosixEnv on
our platforms) since GetChildren*() behavior was inconsistent with our other
Envs. We can normalize the output of GetChildren*() such that these test cases
work on PosixEnv too.
Test Plan: ran env_basic_test
Reviewers: wanning
Reviewed By: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59943
Summary:
move cleanup to TearDown and handle directories, so cleanup will happen
even if a test fails in the middle.
Test Plan: ./env_basic_test
Reviewers: wanning
Reviewed By: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60243
Summary: ensure no 2nd level children under test_dir_
Test Plan: env_basic_test on 4 envs
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59979
Summary:
Add a read option `background_purge_on_iterator_cleanup` to avoid deleting files in foreground when destroying iterators.
Instead, a job is scheduled in high priority queue and would be executed in a separate background thread.
Test Plan: Add a variant of PurgeObsoleteFileTest. Turn on background purge option in the new test, and use sleeping task to ensure files are deleted in background.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59499
Summary: filter_deltes is not a frequently used feature. Remove it.
Test Plan: Run all test suites.
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59427
Summary: We introduced default slow down and stop condition, but didn't reset it in bulk load mode. Fix it.
Test Plan: N/A
Reviewers: igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59757
Summary: Fixed a crash bug that incorrectly parse deprecated options in options_helper
Test Plan:
run db_bench with an old options file with memtable_prefix_bloom_probes
./db_bench --options_file=AN_OLD_OPTIONS_FILE --num=100 --benchmarks=fillseq
Reviewers: sdong, IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59787
Summary:
Add option to not flush memtable on open()
In case the option is enabled, don't delete existing log files by not updating log numbers to MANIFEST.
Will still flush if we need to (e.g. memtable full in the middle). In that case we also flush final memtable.
If wal_recovery_mode = kPointInTimeRecovery, do not halt immediately after encounter corruption. Instead, check if seq id of next log file is last_log_sequence + 1. In that case we continue recovery.
Test Plan: See unit test.
Reviewers: dhruba, horuff, sdong
Reviewed By: sdong
Subscribers: benj, yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57813
Summary:
Try to decompress compressed blocks when a special flag is set.
assert and crash in debug builds if we can't decompress the just-compressed input.
Test Plan: Run unit-tests.
Reviewers: dhruba, andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59145
Summary: It confuses some compilers to have slice.cc under multiple directories. Merge them.
Test Plan: Run existing tests
Reviewers: andrewkr, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59409
Summary: delete_scheduler_test and db_sst_test share a same directory name, causing possible fails on both tests when running in parallel. Fixed by changing directory name.
Test Plan: Run the two tests in parallel: `parallel -u ./{} ::: delete_scheduler_test db_sst_test`
Reviewers: sdong, andrewkr
Reviewed By: sdong, andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59529
