This isn't currently used by any of the callers but it will likely be in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Rather than 3 conditions with if (deliveries && ...), have one block with
the three in them.
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
No real functional changes, this is just for improved readability.
DeliverEventsToWindow used to return an int to specify the number of
deliveries (or rejected deliveries if negative). The number wasn't used by
any caller other than for > 0 comparison.
This patch also changes the return value to be -1 or 1 even in case of
multiple deliveries/rejections. The comment was updated accordingly.
A future patch should probably use the enum EventDeliveryState for
DeliverEventsToWindow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
I'm not sure I like splitting the check for button-press event from the
code which makes assumptions about that check. How about replacing
patches 3 and 4 with this patch instead?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Instead of a mega never-ending if branch with no else, just continue
to the next iteration of the loop if the conditions aren't met - pretty
much entirely reindentation.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously, it only took DeviceEvents, but it would be much more useful
if it took InternalEvents. Any event that activates a grab must still
be a DeviceEvent, so put in a check to enforce this.
Change all callers to make the appropriate casts.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The macro is sufficient if called during a development cycle, but not
sufficient information when triggered by a user (e.g.
https://bugzilla.redhat.com/show_bug.cgi?id=688693).
Expand what this does to print the event content and a backtrace, so at
least we know where we're coming from. Only the first 32 bytes are printed
since if something goes wrong, the event we have is almost certainly an
xEvent or xError, both restricted to 32 bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We were just storing a DeviceEvent, but allocating enough space for an
InternalEvent.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Does what it says on the box: returns the deepest child window in a
given sprite's trace.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
When kept in the structure, it causes the entire MAXDEVICES * 128 masks
to be stored in the data segment and loaded from the file, and also leads
to worries about later generations inheriting changes across server reset.
text data bss dec hex filename
Before: 91837 20528 32 112397 1b70d .libs/events.o
After: 92277 48 20512 112837 1b8c5 .libs/events.o
Before: 3013384 122696 163156 3299236 3257a4 Xorg
After: 3013832 102216 183636 3299684 325964 Xorg
File size before: 4337008 Xorg
File size after: 4316568 Xorg
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This converts all the remaining 1->num loops to the macro,
this removes nearly all the panoramiXNumScreens usage in
loops, and is a step to replacing it.
v2: move some from the other patch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This just uses the FOR_NSCREENS macro instead.
v2: remove some of the 1->x loops.
v3: drop the 1->0 loop, will rework later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
When delivering an event to a device grabbed with SyncBoth,
DeliverGrabbedEvent walks the device tree looking for associated devices
to freeze them. Unfortunately, it froze all devices instead of just the
paired device, and the previous fix in 4fbadc8b17 would still break
if the same client had a non-SyncBoth grab on another unrelated master
device.
Fix this by completely ignoring devices that aren't our paired device.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The removal of the double-use will cause some suble bugs as some conditions
to check for the dev->u.master case were broken and also evaluated as true
if lastSlave was set (instead of master).
Also breaks the input ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
This is not a straightforward search/replacement due to a long-standing
issue.
dev->u.master is the same field as dev->u.lastSlave. Thus, if dev is a master
device, a check for dev->u.master may give us false positives and false
negatives.
The switch to IsFloating() spells out these cases and modifies the
conditions accordingly to cover both cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
GetMaster() returns NULL for floating slaves.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Some event types (notably Expose and GraphicsExpose) require multiple
events, a la XI 1.x. Bring the EventToCore API in line with EventToXI's
and allow it to generate multiple events.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of switching on the event filter to determine delivery, use the
event type instead.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rename the return mask values for EventIsDeliverable:
* CORE_MASK -> EVENT_CORE_MASK
* XI_MASK -> EVENT_XI1_MASK
* XI2_MASK -> EVENT_XI2_MASK
* DONT_PROPAGATE_MASK -> EVENT_DONT_PROPAGATE_MASK
And don't undef them in dix/events.c, since they're supposed to be
global.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CheckDeviceGrabs will activate a passive grab for KeyPress and
ButtonPress events. GrabInfoRec::activatingKey contains the keycode
which activated the passive grab, so we can deactivate it later in
ProcessOtherEvents.
Previously, CheckDeviceGrabs relied on its callers to set
activatingKey, which not all callers were doing (I'm looking at you,
ComputeFreezes). Just set it in CheckDeviceGrabs instead.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The code to set sync.other in DeliverGrabbedEvents is supposed to reset
sync.other for a paired MD to the grab under consideration, but was
rather optimistic in resetting sync.other for _all_ devices.
This would fall apart given two sets of MDs (A paired with B, Y paired
with Z), where both MDs were in FREEZE_BOTH_NEXT_EVENT due to being
called with SyncBoth, where no event had yet triggered the grab. An
event being processed on MD A would result in B, Y and Z all having
sync.other set to A's grab, rather than just B.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Change CheckPassiveGrabsOnWindow to return the GrabPtr it used (or NULL
if none) rather than a boolean, and export it. Also add an additional
boolean 'activate' parameter; use TRUE for existing behaviour, or FALSE
to only find the grab and then return it.
This will be used in forthcoming touch patches to find the grabs, rather
than open-coding same.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make it non-static, add to headers.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Don't try to search for an Xi 1.x grab in CheckPassiveGrabsOnWindow for
events with no Xi 1.x equivalent.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
XYToWindow calculates the position of the cursor and updates the sprite
trace, but does nothing else with the device. Pass a SpritePtr instead
so we can update an alternate focus instead of hardcoding the device's
sprite. Also make this function non-static, so we can use it elsewhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Since FixUpEventFromWindow only uses the sprite trace to determine the
window stack, pass in a sprite instead of hardcoding the device sprite,
so we can deliver to windows other than the one currently containing the
sprite.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
GetCurrentRootWindow already works for the device case, although not as
an lvalue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Will be used outside dix/events.c in proceeding XI 2.1 MT changes.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition of rClient was duplicated across three source files, so
move it to resource.h.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This just simplifies ComputeFreezes, eliminating some duplicated code
and a goto.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CheckPassiveGrabsOnWindow returns FALSE if pWin->optional is NULL,
because wPassiveGrabs uses wUseDefault, so don't bother checking at the
caller.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CheckDeviceGrabs checked all the ancestors of the window containing this
device's pointer even if no new grabs could possibly apply due to the
device already being grabbed.
ActivateFocusInGrab and ActivateEnterGrab already checked whether they
should break an existing grab, and then set up an event that was
completely ignored if they didn't actually break the grab.
In both cases, just do what we would have done eventually anyway--return
FALSE from CheckPassiveGrabsOnWindow's caller--but do it sooner.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Behaviour of earlier X servers was to deliver the ButtonPress event
unconditionally, regardless of the actual event mask being set. This is
documented in the protocol:
"This request establishes a passive grab. In the future, the pointer is
actively grabbed as described in GrabPointer, the last-pointer-grab time is
set to the time at which the button was pressed (as transmitted in the
ButtonPress event), and the ButtonPress event is reported if all of the
following conditions are true:
<list of conditions, event mask is not one of them>"
Thus, a GrabButton event will always deliver the button press event, a
GrabKey always the key press event, etc. Same goes for XI and XI2.
Reproducible with a simple client requesting a button grab in the form of:
XGrabButton(dpy, AnyButton, AnyModifier, win, True, ButtonReleaseMask,
GrabModeAsync, GrabModeAsync, None, None);
On servers before MPX/XI2, the client will receive a button press and
release event. On current servers, the client receives only the release.
Clients that expect the press event to be delivered unconditionally.
XTS Xlib13 XGrabButton 5/39 now passes.
This reverts commit 48585bd1e3.
Effectively reverts commit 1c612acca8 as well,
the code introduced with 1c612 is not needed anymore.
Conflicts:
dix/events.c
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This hides a MAXSCREENS-sized array as an implementation detail of
panoramiX.c rather than an exported global.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Rather than always returning BadValue, associate an error status like
BadWindow with a resource type like RT_WINDOW, and return the
appropriate one for the requested type.
This patch only touches the core protocol resource types. Others still
return BadValue and need to be mapped appropriately.
dixLookupResourceByType can now return BadImplementation, if the caller
asked for a resource type that has not been allocated in the server.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
TryClientEvents already did this; this commit just moves the assignment
one level down so that no event source has to worry about sequence
numbers.
...No event source, that is, except XKB, which inexplicably calls
WriteToClient directly for several events.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This matches the test in TryClientEvents, and is a superset of tests
done by the callers of these functions. The consequence of forgetting
these tests is a server crash, so they're always desirable. In my
opinion, it's better to not require the callers to remember to do these
checks.
For callers that don't do very much work before calling WriteToClient or
WriteEventsToClient, I've removed the redundant checks.
hw/xquartz/xpr/appledri.c has an interesting case: While its check for
"client == NULL" appears redundant with the test in WriteEventsToClient,
it dereferences client to get the sequence number.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27497
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
A few cursor value assignments weren't getting correctly ref counted,
causing leaks of cursor objects.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
this shut up some warnings.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In the process, fixes a memory leak in CloseDevice, and an unchecked
memory allocation in InitializePredictableAccelerationProperties.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
If dixLookupResourceByType did not return Success, it will have set the
pointer to NULL, so the second if will always be true.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The de-duplication of CheckPhysLimits 942eae6868 added a
condition that is invalid for a Xinerama setup. pScreen is invalid for the
Xinerama case, so comparing it to anything is a bad idea.
Signed-off-by: Tim Yamin <plasm@roo.me.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If both devices are synchronously grabbed, first with a GrabPointer, then
with a GrabKeyboard (GrabModeSync on both), sync.other of each device points
to the grab of the respective other device.
If the keyboard is then thawed through a AllowSome request, the VCK's
sync.other is reset to NULL. Subsequently, an event on the VCP would crash
the server when dereferencing sync.other on the VCP.
The check's purpose is to compare if the other device is grabbed by the same
client, which should be checked by accessing (dev->deviceGrab->grab->resource).
A check of the server-1.3 sources confirms that.
XTS test case: Xlib13 XAllowEvents 20.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
A client requesting a GrabModeSync button grab, owner-events true, with only
the ButtonRelease mask set would never receive the press event even if the
grab window had the ButtonPress mask set.
The protocol requires that if owner-events is true, then the delivery mask
is the combination of the grab mask + the window event mask.
X.Org Bug 25400 <http://bugs.freedesktop.org/show_bug.cgi?id=25400>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jim Ramsay <i.am@jimramsay.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reintroduce a check which used to be there in the old
ProcessKeyboardEvent/ProcessPointerEvent codepath, which avoids us
recording events subject to a grab twice: once when it's first processed
in EnqueueEvent, and then again when it's thawed and being replayed.
This required a tiny amount of code motion to expose syncEvents.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Several users have pointed out that this commit introduces regressions, most
notably perhaps fluxbox which essentially stops working after a few clicks.
This reverts commit cf72b5437d.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A client requesting a GrabModeSync button grab, owner-events true, with only
the ButtonRelease mask set would never receive the press event even if the
grab window had the ButtonPress mask set.
The protocol requires that if owner-events is true, then the delivery mask
is the combination of the grab mask + the window event mask.
DeliverGrabbedEvents does this already for us, checking first the delivery
based on owner_events and then based on the grab mask. AFAICT, the device
cannot enter the states FREEZE_BOTH_NEXT_EVENT or FREEZE_NEXT_EVENT that
would be handled by DGE in any possible path here.
Bonus point - CheckPassiveGrabsOnWindows suddenly becomes a lot lesss
complicated.
X.Org Bug 25400 <http://bugs.freedesktop.org/show_bug.cgi?id=25400>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
A direct grab on a slave device through XI2 detaches it, regardless of
whether the grab is sync or async. So this comment doesn't apply to XI2
anyway.
For XI1, aside from your life being miserable already, it doesn't matter as
XI1 does not have a concept of attachment. You can freeze a device and if
you don't freeze _all_ other devices at the same time, the master device can
still happily send events to the client.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Adam Jackson <ajax@redhat.com>
A denial is normal and the behavior should be to drop the event.
Having the log message creates excessive log spam.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
The log messages still need to be there for non-XACE failures.
This reverts commit 4be354c4c2.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
RECORD was disabled during the switch to internal events. This patch
modifies the record callback to work with internal events instead of
xEvents. The InternalEvents are converted to core/Xi events as needed.
Since record is a loadable extension, the EventTo* calls must be externed.
Signed-off-by: Chris Dekter <cdekter@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It is normal for XACE to deny an event delivery, so these log messages
shouldn't trigger when that happens. Just drop them for now.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Instead of returning BadAccess when "read" permission is denied
on a device, falsify the device state (buttons down, keys pressed).
This is nicer to applications, but may still have undesired side
effects. The long-term solution is not to use these requests in
event-driven code!
Requests affected: QueryPointer, QueryKeymap, XiQueryDevice.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
A device with valuators but no keys is definitely a pointer device and needs
to be attached to the VCP. Otherwise, the class copying happens on the VCK
and the VCP isn't updated with the events that are to be sent through it.
This addresses the trigger for #24441, not the actual issue.
Jury is still out on valuator+key devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
On 64-bit systems, int and pointers don't have the same size, so GCC gives
warnings about casts between int and pointer types. However, in the cases
covered by this patch, it's always a value that fits in int being stored
temporarily as a pointer and then converted back later, which is safe.
Casting through the pointer-sized integer type intptr_t convinces the
compiler that this is OK.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
silences compiler warning:
events.c: In function 'FixUpEventFromWindow':
events.c:2262: warning: 'child' may be used uninitialized in this function
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For core and XI1 events, store the key_repeat flag in the sequence number
until TryClientEvents. The sequenceNumber is unset until TryClientEvents.
[Also thrown in, some random indentation changes. Thanks]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the windows are restructured, CheckMotion needs to be called for all
masters and floating slaves to update the spriteTrace.
X.Org Bug 23257 <http://bugs.freedesktop.org/show_bug.cgi?id=23257>
Tested-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XI1 grabs on slave devices leave the device attached - just like in earlier
versions of XI.
Tested-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The sourceid for enter/leave events as a result of pointer motion is the ID
of the slave device. The sourceid for those as a result of a grab activating
is the device itself.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
EventToXI2 returns a NULL event for enter/focus events since these events
aren't yet wrapped into internal events. This is a quickfix only, it works
thanks to the alignment of internal and XI2 event types.
Eventually, enter/leave events should be wrapped into internal events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A client that grabs for button/key events may not have the
ButtonPress/KeyPress mask set and should not receive an event in that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keysym grabs are tricky in the details, keycode grabs are known to work. So
for now, provide keycode grabs only.
Requires inputproto 1.9.99.15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously, an active grab on an attached slave device would send the device
floating for the duration of the grab. This breaks existing XI applications
(e.g. the GIMP) since they grab all devices automatically - resulting in the
loss of control over the VCP.
The behaviour of extended input devices during a grab in relation to the
core pointer is not specified in the XI protocol specification.
The removal of the temporary detachment restores the behaviour of extended
input devices as present in currently released servers - even if a device is
grabbed, an event from this device will result in an event from the core
pointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Presumably, some intelligent, XI2-aware management app will be calling
XISetClientPointer on behalf of other clients; this check makes sure
the target client has permission on the device.
Requires changing the prototype to return status code instead of Bool.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
event->type is always GenericEvent for XI2 events. Instead, XI_ButtonPress
(the generic event's evtype must be stored.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetMaster is more reliable than GetPairedDevice, it always returns the
keyboard/pointer if desired, even if the wrong device was passed in.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Let EventToXI, EventToCore and EventToXI2 return BadMatch if there's no
matching event for this protocol spec.
Adjust the delivery paths to cope with BadMatch errors (and clean them up on
the way).
As a side-effect, this fixes server crashes on proximity events for a
grabbed device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For proximity events, the XI2 type is 0 and inputMasks never got set in the
preceding condition. As a result, proximity events got never delivered.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These grabs are suported through two fake devices inputInfo.all_devices and
inputInfo.all_master_devices. These devices are not part of the device list
and are only initialised for their device id, nothing else.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A passive XI2 grab always uses the paired master device as a modifier
device. After issuing a passive grab, the slave may be reattached to a
different master and hence the modifier device may change.
Rework addresses two issues:
- storing the master device's pointer is a bad idea, we need to store the ID
of the device in case it disappears during the grab.
- restoring the old master did not actually reattach the device. Fixed now.
grab->type is the device type and XI2 types overlap with core events (being
less than GenericEvent). Thus, for passive grabs the grab device would be
overwritten with whatever device was activating it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Extension devices have ActivateKeyboardGrab as their grab activation
function, hence we need to ensure the implicit passive grab flag is set
accordingly in the grab for further event delivery.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If an implicit passive grab is active, the XI event mask is in
grab->deviceMask. Otherwise, for explicit grabs, the XI event mask is in
grab->eventMask.
Reported-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a passive enter or focus in grab activates, send additional enter or
focus events with mode XIPassiveGrabNotify to the grabbing client.
Likewise, if the grab deactivates, send additional leave or focus out
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Enter grabs are checked for in CheckMotion(), each time the sprite window
changes the current grab is deactivated (if applicable) and the new grab is
activated (if applicable). Exception - if the grab is on a parent window of
the current window since we keep the grab across descendants.
Since CheckMotion() may change the grab status of a device, we mustn't get
"dev->deviceGrab.grab" in ProcessOtherEvents until after CheckMotion().
FocusIn grabs are checked in much the same manner.
The event delivery for grabs replaces the NotifyNormal on window change with
a NotifyGrab on window change. Note that this happens before the grab
activates, so the EnterNotify(NotifyGrab) is still delivered to the window,
not to the grabbing client. This is in line with the core protocol semantics
for NotifyGrab events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's devices (e.g. some barcode readers) that have axes but no buttons.
When such a device sends a motion event, the valuator and button class is
copied into the master pointer (i.e. removing the button class).
So we need a couple of extra sanity checks for the button class to exist.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no need for internal events to be a struct with a single nested
union, we might as well make the union itself the InternalEvent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
Add a proper access mode, and reverse the logic of the return value.
Zero ("Success") is returned on success from the hook calls.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Error: Write outside array bounds at Xext/geext.c:406
in function 'GEWindowSetMask' [Symbolic analysis]
In array dereference of cli->nextSib[extension] with index 'extension'
Array size is 128 elements (of 4 bytes each), index <= 128
Error: Buffer overflow at dix/events.c:592
in function 'SetMaskForEvent' [Symbolic analysis]
In array dereference of filters[deviceid] with index 'deviceid'
Array size is 20 elements (of 512 bytes each), index >= 0 and index <= 20
Error: Read buffer overflow at hw/xfree86/loader/loader.c:226
in function 'LoaderOpen' [Symbolic analysis]
In array dereference of refCount[new_handle] with index 'new_handle'
Array size is 256 elements (of 4 bytes each), index >= 1 and index <= 256
These bugs were found using the Parfait source code analysis tool.
For more information see http://research.sun.com/projects/parfait
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yes, this means we have even more arguments to GrabDevice. But it beats having
a copy of most but not all of GrabDevice in ProcGrabPointer.
Also, reshuffle the order of parameters, the CARD* status is a return value
and should be last.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
0 is now reserved for the "AllDevices" virtual device.
1 is now reserved for the "AllMasterDevices" virtual device.
This also means that wherever we passed in (mskidx = 0), we now need to pass
in the deviceid.
Don't let everyone acces the filters[] array directly. This is necessary once
we start dealing with GenericEvents, where the filters are a bit more
complicated.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The masks were originally designed to generically handle event masks for
extensions. Since all that is in-server anyway, it's much better writing
custom event masks for those extensions that need it and not providing a
unified mechanism.
XI2 needs more than the current implementation, which is already too complex
for most other extensions. good riddance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Best to FatalError if a wrong event comes in. At least that forces me to fix
it really quickly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This did access the wrong device's sync state, potentially freezing or not
thawing the actual device that was supposed to be thawed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
dixLookupResource attempted to automatically detect whether the caller
wanted a lookup by-type or by-class, unfortunately, it guessed wrong for
RT_NONE. Instead of trying to make the guess better, this patch just reverts
the unification and creates separate functions for each operation.
Don't pass xEvent* and count through to processing, pass a single
InternalEvent.
Custom handlers are disabled for the time being. And for extra fun,
XKB's pointer motion emulation is disabled. But stick an error in there so
that we get reminded should we forget about it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the API change, we can now purge the XI conversion from POE.
Note: this commit breaks DGA even more.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
deviceGrab.sync.event is now an internal event, and CheckDeviceGrabs and
friends is changed over.
Note that this currently breaks some frozen grabs. See towards the end of
ComputeFreezes().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that we're only partially switched to internal events. The event in the
devices' event queue (dev->deviceGrab.sync.event) is still an XI event. The
events in syncEvents are InternalEvents only now.
This also implies fixing CheckVirtualMotion to work with internal events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Get rid of the deviceValuator processing and a few other things, but still
drop back into XI before checking device grabs or doing anything else.
NoticeEventTime now needs to take InternalEvents, and while we're at it,
change NoticeTime from a macro to a function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
Before dropping down into the DIX, convert back into XI events. This is a
temporary solution only, until the DIX is capable of handling InternalEvents
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather, modify the two callers to call separately for the two different.
events. Unexport SetMaskForEvent too.
And while we're at it, get rid of the MotionFilter macro, because it's one
half confusing and one half pointless.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
