Instead of letting it languish in extmod just because we want to
configure bits of it from xf86, move XSELinux to the builtin part of
Xext, and do its configuration from xf86ExtensionInit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xv used to call XvScreenInit and co. through function pointers, as
XvScreenInit may have been sitting on the other side of a module
boundary from xf86XvScreenInit. Why this was so is a mystery, but make
it not so any more.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build these extensions into the core server, rather than letting
them languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build XRes support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build DPMS support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we've built MIT-SCREEN-SAVER support, then just build it into the
main binary, rather than leaving it in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than languishing in its own special module, move RECORD into the
core server.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If DBE support is compiled in the server, just man up and build it into
the server, rather than having it as an external module.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
NULL sentinels are totally lame.
v2: numExtensionModules isn't public, so keep using the provided
sentinal - Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Stéphane Marchesin <stephane.marchesin@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create extinit.h (and xf86Extensions.h, for Xorg-specific extensions) to
hold all our extension initialisation prototypes, rather than
duplicating them everywhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than making poor old miinitext.c do it, including making DMX
have fake symbols just to keep it happy.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Stéphane Marchesin <stephane.marchesin@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reorder static extension initialisation in miinitext for non-Xorg
servers to match Xorg's order.
Tested with Xephyr; checked that the extension list was identical before
and after.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
INITARGS was a hardcoded define to void. Since knowing the function
signature for your extensions is kinda useful, just replace it with a
hardcoded void, but leave the define there for API compatibility.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Ensures padding bytes are zero-filled
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Instead, only save them for the most recently drawn cursor. This saves
a bunch of storage for idle cursors.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This merge includes a minor fixup for '%p' arguments; must cast to
uintptr_t instead of uint64_t as we use -Werror=pointer-to-int-cast
which complains when doing a cast (even explicitly) from a pointer
to an integer of different size.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This code existed in 3 different forms, perhaps it should be
consolidated.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a squash merge containing all the API changes, as
well as the video ABI bump.
Its been squashed to make bisection easier.
Full patch log below:
commit b202738bbf0c5a1c1172767119c2c71f1e7f8070
Author: Aaron Plattner <aplattner@nvidia.com>
Date: Mon May 14 15:16:11 2012 -0700
xfree86: Bump video ABI to 13.0
The ABI was broken by changes to convert from screen index numbers to ScreenPtr
/ ScrnInfoPtr in various structures and function signatures.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d5f7d9f8d408bcad3f83277d255f25d3b0edbf3
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 10:56:57 2012 +0100
xf86: xf86ClearEntityListForScreen should take a pScrn
When adding GPU screens this make life easier.
(also fix comment, as pointed out by Alan)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit afee8b5ab4501597ecc1ade34124d7ca227ab055
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 07:07:32 2012 +0100
xf86i2c: add pscrn for drivers to use
This just adds a pScrn pointer into the struct for the drivers to use
instead of scrnIndex. Mostly scrnIndex is used for logging, but some
drivers use it to lookup xf86Screens, so let them stash a pScrn instead.
Removing the scrnIndex is a bit more involved and I'm not sure its worth
the effort. Doing i2c in the X server is legacy code as far as I'm concerned.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit ea5092f1f679691d187f1eee9427e6057beec56e
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 19:25:20 2012 +0100
dix/gc: consolidate GC object creation in one place
The standard GC create and scratch GC create were 90% the same really,
and I have a need in the future for creating GC objects without the
other bits, so wanted to avoid a third copy.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d91482ea9b4883e64e496f2768168e0ffa21ba1
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 10:24:06 2012 +0100
xf86: add a define to denote the new non-index interfaces are being used
This can be used by drivers to provide compatible APIs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 37c3ae3e6cd4f3dedc72f371096d6743f8f99df3
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 15:09:12 2012 +0100
dix: make Create/Free scratch pixmaps take a ScreenPtr
While technically an API/ABI change I doubt anyone uses it,
but it helps in splitting screens up.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 75f2062a3fe94f04764ecc7d2ff2fbbeccb9da60
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:57:55 2012 +0100
xf86/xv: remove scrnIndexfrom xf86FindXvOptions.
Move this interface to taking an ScrnInfoPtr.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit f80c2374f40ea7b2ee0556e2e76cc07406f3d843
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:53:59 2012 +0100
xf86: make xf86DeleteScreen take a ScrnInfoPtr (v2)
stop passing indices into this function.
v2: drop flags argument.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 58824e414f35682435f15bfe6c4b656bd90b9235
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:48:09 2012 +0100
xf86: fix xf86IsScreenPrimary interface to take a pScrn (API/ABI)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6b4fc1f9d391bcdf7ca288766e49bce60f4635cd
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:18:59 2012 +0100
xserver: convert block/wakeup handlers to passing ScreenPtr (ABI/API) (v2)
Instead of passing an index, pass the actual ScreenPtr. This allows
more moving towards not abusing xf86Screens + screenInfo.
v2: drop the blockData/wakeupData args as per ajax's suggestion.,
fix docs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 790d003de20fb47674420a24dadd92412d78620d
Author: Dave Airlie <airlied@gmail.com>
Date: Wed Apr 11 09:53:14 2012 +0100
xf86/common: remove some more pScrn->pScreen uses
remove some more conversions that appeared after api cleanups.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aac85e18d1dd093f2cad6bd29375e40bd7af0b8f
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:34:53 2012 +0100
ddc: change API to take ScrnInfoPtr (v2)
This removes all xf86Screens usage from ddc code,
it modifies the API for some functions to avoid taking indices.
v2: address Alan's comments about dropping DDC2Init parameter.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit fe3f57b6eaf6860a33876a54f9439f69578f03a5
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:31:26 2012 +0100
vbe: don't use index for VBEInterpretPanelID (API)
Remove use of xf86screens from vbe module.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit abf1965f4ed91529036d3fdb470d6a3ce6f29675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:25:11 2012 +0100
int10/vbe: don't use xf86Screens. (ABI) (v3)
Pass the ScrnInfoPtr instead of the index in the int10 struct.
This saves us using it to dereference xf86Screens.
v2: address Alan's comment to fix struct alignment.
v3: squash in all the int10 fixes, test the vm86 code builds,
after comments by Keith.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 23cca612b4fb5efc33683c7624b803b457387e3d
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:30:18 2012 +0100
xserver: drop index argument to ScreenInit (ABI/API) (v2)
This drops the index argument, its the same as pScreen->myNum,
and its the last major index abuse I can find.
v2: address Alan's review - update docs, fix xwin/xnest/darwin
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 40d360e2d7e832407f3ed64e3a02c27ecc89a960
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:23:01 2012 +0100
xf86: migrate PointerMoved from index to ScrnInfoPtr (ABI/API)
This migrates PointerMoved from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aa60a2f38679d0eeb979a9c2648c9bc771409bf9
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:20:46 2012 +0100
xf86: migrate PMEvent to a ScrnInfoPtr (ABI/API)
This migrates the PMEvent from index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d3f28ef44371ed4a039ffc5dd7eb6408d1269ba2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:18:30 2012 +0100
xf86: migrate SetDGAMode from index to ScrnInfoPtr (ABI/API)
This migrates the SetDGAMode callback from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit baf5e4818a74f2b68c3dfdcc56f54322351039a0
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:14:11 2012 +0100
xf86: migrate ChangeGamma from index to ScrnInfoPtr (ABI/API) (v2)
This migrates the ChangeGamma interface to avoid passing a index.
v2: fix xf86RandR12.c + xf86cmap.c call
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 51e5f90ada929d6b23176090badbb42fdb3fa550
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:11:09 2012 +0100
xf86/exa: migrate index to screen types for EnableDisableFBAccess (ABI/API)
The EXA interface migrates to ScreenPtr,
and the xf86 interface migrated to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 94f1f21d17e86f96d4a54292a399160950087675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:02:11 2012 +0100
xf86: migrate ValidMode callback to ScrnInfoPtr (ABI/API)
This migrates the ValidMode to passing a ScrnInfoPtr instead
of an index.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3f8f18198fed4f39ec805b508a3482e91eea26b2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:59:46 2012 +0100
xf86: migrate SwitchMode to taking ScrnInfoPtr (ABI/API) (v2)
This migrate the SwitchMode interface to take a ScrnInfoPtr
instead of an index.
v2: drop flags.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d06a038a5c49328ab3a8d969d24f9fcd22c63202
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:50:37 2012 +0100
xf86: move AdjustFrame to passing ScrnInfoPtr (ABI/API) (v2)
This converts AdjustFrame code paths to passing a ScrnInfoPtr
instead of an integer index.
v2: drop flags args.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 53d2f8608ffd4090d08e7d5cf2e92fb954959b90
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:41:27 2012 +0100
xf86: modify FreeScreen callback to take pScrn instead of index. (ABI/API) (v2)
Another index->pScrn conversion.
v2: drop flags arg.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 60db37c0b247052e0f5c54b1921fe58a3609c2e3
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:35:41 2012 +0100
xf86: change EnterVT/LeaveVT to take a ScrnInfoPtr (ABI/API break) (v2)
This modifies the EnterVT/LeaveVT interfaces to take a ScrnInfoPtr
instead of an index into xf86Screens. This allows dropping more
public dereferences of the xf86Screens and screenInfo.
v2: drop flags args as suggested by Keith, fix docs.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 06729dbbc804a20242e6499f446acb5d94023c3c
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:04:59 2012 +0100
xserver: remove index from CloseScreen (API/ABI breakage)
This drops the index from the CloseScreen callback,
its always been useless really, since the pScreen contains it.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
When depth equal to 32 and planeMask equal to 0, the overflow will
occur and cause the pixmap can't be cleared. There are some test
cases in XTS hit this bug, and this fix can eliminate the corresponding
failures.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch applies most of the protocol conversions and the internal event
type for ownership events.
Note that ownership events are generated by the DIX only, they do not pass
through the event queue.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No-one can generated them yet, but if they could, we'd be processing them
like there was no tomorrow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The are the same as device events internally but require the touch ID
separately from the detail.button field (the protocol uses the detail field
for the touch id).
For simpler integration of pointer emulation we need to set the
detail.button field while keeping the touchid around.
Add the three new touch event types to the various places in the server
where they need to be handled. The actual handling of the events is somewhat
more complicated in most places.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Replace multiple methods of checking for functions with AC_CHECK_FUNCS
Replace multiple methods of selecting fallback funcs with AC_REPLACE_FUNCS
Replace HAS_* and NEED_* #defines with autogenerated HAVE_*
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The last 64 events in the event queue will be reserved for release
events in order to help return the system to a cleaner state when
it comes back from a soft wedge.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch changes from a static length event queue (512) to one that
starts at 128 and grows to 4096 as it overflows, logging each time it
grows.
This change also allows for multiple backtraces to be printed when the
server is wedged rather than just one. This increased sampling should
help identify the true hog in cases where one backtrace might be
insufficient.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
miPointerSetPosition traditionally took coordinates on a per-screen basis,
triggering a screen switch when these went out-of-bounds. For absolute
devices, this prevented screen crossing in the negative x/y direction.
This patch changes the event generation patch to handle screen coordinates
in a desktop range (i.e. all screens together). Screen switches are
triggered when these coordinates are not on the current screen.
This unifies the pointer behaviour of single ScreenRec multihead and
multiple ScreenRecs multihead in that the cursor by default moves about the
whole screen rather than be confined to one single screen. The
transformation matrix may then be used to actually confine the cursor to the
screen again.
Note: fill_pointer_events has to deal with several different coordinate
systems. Make sure you read the comment before trying to understand the code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't switch between doubles and ints in the caller, instead take doubles in
miPointerSetPosition and do the conversion there. For full feature we should
change everything down from here for doubles too.
Functional change: previously we'd restore the remainder regardless of
screen switching/confinement (despite what the comment said). Now,
screen changing or cursor constraints will cause the remainder be clipped
off. This should happen for cursor constraints but arguably not for screen
crossing.
This also corrects a currently wrong comment about miPointerSetPosition's
input coordinates.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
miPointerSetPosition may switch screens. Always return the screen the sprite
is on instead of relying on callers to call miPointerGetScreen().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
gcc generates better code with fabs() anyway.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
misprite.c: In function 'miSpriteSaveUnderCursor':
misprite.c:940:12: warning: variable 'y' set but not used
[-Wunused-but-set-variable]
misprite.c:940:9: warning: variable 'x' set but not used
[-Wunused-but-set-variable]
mivaltree.c: In function 'miComputeClips':
mivaltree.c:226:10: warning: variable 'resized' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
fromDIX is neither exactly true nor particularly helpful in understanding
what this parameter triggers. Rename to set_dequeue_screen, because that's
exactly what happens.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The composite extension spec says that window background painting
should be inhibited when the subwindow redirection mode is set to
manual.
This eliminates the ugly flashing effect when compiz unredirects a
fullscreen window.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Owen Taylor <otaylor@fishsoup.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
RawEvents are supposed to be events coming from the driver. When warping the
pointer, this should not generate a raw event.
X.Org Bug 30068 <http://bugs.freedesktop.org/show_bug.cgi?id=30068>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes regression introduced by 5690199802
mieq.c:159:5: error: implicit declaration of function 'verify_internal_event' is invalid in C99 [-Wimplicit-function-declaration,Semantic Issue]
verify_internal_event(e);
^
1 error generated.
Also includes some other warning cleanups in events.c we're there.
events.c:2198:24: warning: equality comparison with extraneous parentheses [-Wparentheses,Semantic Issue]
else if ((type == MotionNotify))
~~~~~^~~~~~~~~~~~~~~
events.c:2198:24: note: remove extraneous parentheses around the comparison to silence this warning [Semantic Issue]
else if ((type == MotionNotify))
~ ^ ~
events.c:2198:24: note: use '=' to turn this equality comparison into an assignment [Semantic Issue]
else if ((type == MotionNotify))
^~
=
events.c:2487:5: error: implicit declaration of function 'verify_internal_event' is invalid in C99 [-Wimplicit-function-declaration,Semantic Issue]
verify_internal_event(event);
^
events.c:5909:22: warning: declaration shadows a local variable [-Wshadow,Semantic Issue]
DeviceIntPtr it = inputInfo.devices;
^
events.c:5893:18: note: previous declaration is here
DeviceIntPtr it = inputInfo.devices;
^
3 warnings and 1 error generated.
events.c:2836:27: warning: incompatible pointer types passing 'DeviceEvent *' (aka 'struct _DeviceEvent *') to parameter of type
'const InternalEvent *' (aka 'const union _InternalEvent *')
verify_internal_event(ev);
^~
../include/inpututils.h:40:56: note: passing argument to parameter 'ev' here
extern void verify_internal_event(const InternalEvent *ev);
^
1 warning generated.
Found-by: yuffie tinderbox (-Werror=implicit)
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
The macro is sufficient if called during a development cycle, but not
sufficient information when triggered by a user (e.g.
https://bugzilla.redhat.com/show_bug.cgi?id=688693).
Expand what this does to print the event content and a backtrace, so at
least we know where we're coming from. Only the first 32 bytes are printed
since if something goes wrong, the event we have is almost certainly an
xEvent or xError, both restricted to 32 bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Free the pointers inside miInitVisuals, so the callers of this function
(fboverlay.c and fbscreen.c) don't need to worry with deallocation in the case
of failure.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Nicolas Peninguy <nico@lostgeeks.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The record allocated by miSpriteDeviceCursorInitialize was not being
released.
This patch makes misprite use dixRegisterPrivateKey with the record
size argument, which handles the memory management issues.
miSpriteDeviceCursorInitialize is restructured to initialize pCursorInfo
only if miDCDeviceInitialize succeeds. The record itself is zeroed on
cleanup to ensure that the assumptions in the code still hold.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
v2: Cover more paths, spotted by Daniel Stone.
v3: pass down the mode field for movement mode.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The removal of the double-use will cause some suble bugs as some conditions
to check for the dev->u.master case were broken and also evaluated as true
if lastSlave was set (instead of master).
Also breaks the input ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
This is not a straightforward search/replacement due to a long-standing
issue.
dev->u.master is the same field as dev->u.lastSlave. Thus, if dev is a master
device, a check for dev->u.master may give us false positives and false
negatives.
The switch to IsFloating() spells out these cases and modifies the
conditions accordingly to cover both cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
These two were sideeffects of lastSlave being in the same field as the
master. For devices generated by the master device directly, lastSlave was 0
and the device would (with the old checks) be interpreted as floating.
Add the required checks to safeguard against master devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Note sure why this is in if 0 but it's been that way since 2007.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Push into the respective devices. This should have no functional changes
since we never warp more than one device at a time. In the glorious future
with true multithreading, still the better thing to do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Which makes it useless, so remove it.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The extra SourceValidate calls from damageCopyArea and damageCopyPlane
can be removed.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pass the subWindowMode from the GC/source Picture to SourceValidate.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
miSpriteBlockHandler takes about 10us in arm each time BlockHandlers are
called. To eliminate that overhead from xserver side only register the
BlockHandler when there actually is any cursor down.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
There is no need to have damage handler registered when there isn't any
pointer in the screen. This avoids some overhead from damage handling
which takes tens of microseconds on arm.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
SCREEN_EPILOGUE should read the current function pointer from screen
after calling wrapped function in case the pointer changes.
Passing pPriv to macros instead of asking dix each time makes sense when
both macros need same pointer.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The subtype in the DGA event is the core type and all ET_ event types (where
applicable) are identical to the core types. Thus the switch statement below
will work as required and assign the right master device.
Fixes a crasher bug on keyboard devices with valuators. If a device sends a
motion event while grabbed and a DGA client is active (but has not selected
input through DGA), the valuator event is posted through the VCK and
eventually results in a NULL-pointer dereference on dev->valuator.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Lines of length greater than 46340 can be drawn with one of the
coordinates being negative. However for dashed lines, miPolyBuildPoly
overflows the int type when setting up edges for a section of the
dashed line. This results in the dashed segments not being drawn at
all.
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL)
- free(E);
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
event_size is never assigned to in mieqProcessInputEvents(), so realloc()
is always called. This is benign, but I'm guessing not intended.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This replaces dixCreatePrivateKey and the only uses, which were in
midispcur.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The caller is required to have validated the GC for the drawable before
calling any ops, including PolyGlyphBlt.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
pBSReg is always NULL, so the statement after the conditional will never be
reached.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
We should update the serial number even if we just change a single field.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Having miPointerMove and miPointerMoved is confusing, especially since both
do the same thing bar the event delivery. Also, miPointerMove calls
miPointerMoved which indicates some confusion in the temporal alignment of
cause and effect.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This reverts commit 9120e58556.
Whoops, please revert this patch -- overlay is in use in nvidia drivers,
and it's too late in release cycle to remove it.
I feel really sorry that I kept this patch in my tree. I will submit
another one, removing only XAA overlay hooks which are not used at all.
The only reference to it in server and drivers is in XAA overlay code which
would segfault as no miInitOverlay is called ever. No segfaults were observed
"in wild", so XAA overlay is probably also unused.
XAA code is modified to act as if miOverlayCopyUnderlay always returned false,
because XAACopyWindow8_32 could only set doUnderlay to true if it's called from
miOverlayMoveWindow or miOverlayResizeWindow, which can only be called if
miInitOverlay has hooked those functions, and no driver (on fd.o) or server code
calls that.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
midispcur was abusing the CursorScreenKey to index the cursor_bits
privates, it also had a MAXSCREENS array of keys to index device
privates. Switch both of these to the new dixCreatePrivateKey API and
store a pointer to that in the screen private.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
The CursorScreenKey array is supposed to be used by the DDX for cursor
private data, but midispcur was abusing it to hold cursor bits private
information. Create a separate set of privates for the dispcur cursor
bits information.
This also renames the device private index and macros to better
reflect their usage:
miDCSpriteKey -> miDCDeviceKey
MIDCBUFFER -> miGetDCDevice
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This prepares the file to be moved from mi to dix. This patch
was done mechanically with the included scripts 'fix-miregion' run over
the entire X server and 'fix-miregion-private' run over
include/regionstr.h and mi/miregion.c.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Most references to the savedScreenInfo array already had the
corresponding screen pointer handy, which meant they usually looked like
"savedScreenInfo[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
It's been commented-out for three and a half years and nobody seems to
be missing it enough to resurrect it.
Besides deleting code that is untested and therefore buggy, this saves a
little memory for each pointer device on each screen.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Propagate the shape kind all the way to SetShape to avoid performing non-input
operations such as revalidating the tree and generating exposures when only
changing a window's input shape.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Acked-by: Aaron Plattner<aplattner@nvidia.com>
Reviewed-by: Daniel Stone<daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reverts part of the effects of 518f3b189b,
"mi: don't thrash resources when displaying the software cursor across
screens". The per-screen cache is preserved, and the GCs are still
allocated eagerly, but now it doesn't construct pRootPicture until
somebody attempts to draw an ARGB cursor.
I noticed crashes in Xnest, which doesn't support the RENDER extension,
but I suspect other DDXes that support disabling that extension would
have had issues as well.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
ActivateDevice was ignoring errors from DeviceCursorInitialize, so
cursor-related calls failed later. Jeremy Huddleston saw that crash in
miPointerConstrainCursor, while with Xvfb I saw it in
miSpriteRealizeCursor.
miDCDeviceCleanup frees any non-NULL GCs. miDCDeviceInitialize calls
Cleanup on any failure, but if it failed early then some of the pointers
in the miDCBufferPtr were garbage. Switch from malloc to calloc to
ensure everything's initialized safely first.
With these two fixes, if CreateGC fails then the server gracefully fails
in FatalError instead of segfaulting.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If filter is NoEventMask (aka CantBeFiltered), grab is null, and the
first event is not in the set of "critical events", then TryClientEvents
simply calls WriteEventsToClient. In that case, it returns 0 for fake or
dead clients, and 1 otherwise. Inline for this special case.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Both functions compute a set of spans and either fill them immediately
or accumulate them into a caller-provided buffer.
Computing the spans used only the miTranslate and lineWidth fields of
pGC, and neither could have been changed by the initial
ChangeGC/ValidateGC pair, so it's safe to compute the spans first.
Then both functions consume the spans the same way, so factor that into
a new fillSpans function.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
The call in CreateGC is particularly questionable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
miPolyPoint ought to leave the GC unchanged even if it fails. ajax says:
> We have a new winner for the oldest-bug competition! It's actually
> been like that since X11R1:
>
> -rw-r--r--. 1 ajax ajax 2817 1987-09-12 01:20 ddx/mi/mipolypnt.c
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This does make wide ellipses slower, by a factor of twoish:
946000.0 521000.0 ( 0.55) 10-pixel wide ellipse
98300.0 49900.0 ( 0.51) 100-pixel wide ellipse
17700.0 9310.0 ( 0.53) 500-pixel wide ellipse
16900.0 7980.0 ( 0.47) 100-pixel wide dashed ellipse
16100.0 5370.0 ( 0.33) 100-pixel wide double-dashed ellipse
But no one cares, and it's a modest size win:
text data bss dec hex filename
1773824 69552 59288 1902664 1d0848 hw/vfb/Xvfb.before
1773112 69552 58648 1901312 1d0300 hw/vfb/Xvfb
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Presumably no implications, especially security-wise.
Signed-off-by: Matthias Hopf <mhopf@suse.de>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Banked framebuffers are so 1990. As of 7.4 the only drivers remaining
that used this were chips, neomagic, trident, and vesa. vesa only used
it when not using shadowfb, which is broadly undesirable anyway, and no
longer uses it at all as of 2.3.0. neomagic never used it by default,
and support for it is gone in git master. The other two effectively
only ever used it for ISA chips; since ISA support is now gone from
the server, they have been modified to only compile mibank support when
ISA support is available.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This changes the DC layer to maintain a persistent set of GCs/pixmaps/pictures
for each pScreen instead of failing to thrash between them when changing
screens.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
The rationale behind is because no sane application will use this when we have
modern APIs such DRI2. Besides, as a fact, xfree86 server has already
deprecated this extension in 1998:
http://www.xfree86.org/3.3.6/isc7.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
miSpriteRealizeCursor is called whenever a device is set floating and it's
fine to do so, no need for an error message.
Same goes for the other miSprite messages.
X.Org Bug 26843 <http://bugs.freedesktop.org/show_bug.cgi?id=26843>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This changes the DC layer to maintain a persistent set of GCs/pixmaps/pictures
for each pScreen instead of failing to thrash between them when changing
screens.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Calls RegisterResourceName to record the type name for
use by X-Resource, XACE/SELinux/XTsol, and DTrace.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Users should be told they can't disable XKB or XInput via error messages,
not core dumps.
Reported by T`2 on #xorg irc
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch undefines MITSHM for dmx - we don't support the required
screen->ModifyPixmapHeaders. All undefines are moved from dmx-config to
miinitext.c, where they belong.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Now that all event queues hold internal events only, they never need
to be resized. Resizing them led to memory corruption as they would
get sized for an appropriate xEvent, not an internal event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The server was processing ET_RawMotion type when the cursor was wrapping to
another screen and getting wrong valuator values. This fix such issue
considering only ET_Motion, ET_KeyPress, ET_KeyRelease, ET_ButtonPress and
ET_ButtonRelease types when the cursor detects a new screen, keeping the
"normal" processing of device events.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is long overdue. The device events are InternalEvents now (and only one
at a time), diminishing the need for an EventList for the master event.
Furthermore, don't make masterEvent a static since this will interfere if
mieqProcessDeviceEvent is called from somewhere else (e.g. XKB actions).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xextproto had Xlib client headers moved into libXext.
Protocol header files are named fooproto.h, header files with constants
foo.h or fooconst.h where foo.h was already in use for client-side headers.
The number of input devices is MAXDEVICES, not MAX_DEVICES (f781a752e6)
Two comments updated to refer to MAXDEVICES.
MAX_FUNCS in sigio.c was set to 16 if MAX_DEVICES was undefined. If more
than 15 physical input devices were present, this could result in a
failure to install the SIGIO handler for any device above 15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
SDs may be detached during event processing (e.g. if a passive grab
activates). In this case, the event must not be processed through the master
device.
Reported-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is related to: bc964ff1e3
XQuartz: Stab at fixing the alpha 0/1 bug (screenshots, etc) by pulling in some old code that got gutted from rootless.
which was on the 1.4 branch and implemented in fbPaintWindow. Now that fbPaintWindow is gone, this is now in miPaintWindow().
(cherry picked from commit 032173f693)
Both may in some cases be called for a SD attached to a master keyboard. In
this case, we need to get the right master device (i.e. the pointer).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Copying all classes into the master device has drawbacks for hybrid devices
(devices that are both mice and keyboards). If such a device posts an event,
it's key classes are moved into the VCP. The key event itself is unaffected
by keyboard grabs and the like.
Partial class copying copies depending on the event and copies the classes
into the right master device (i.e. the VCK for key events, the VCP for
pointer events).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no need for internal events to be a struct with a single nested
union, we might as well make the union itself the InternalEvent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This function was deprecated in ef68273f5b
because it didn't take a device argument. The device argument was added in
1c7568b8a1 though, so the deprecation is
obsolete.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This function was deprecated in ef68273f5b
because it didn't take a device argument. The device argument was added in
1c7568b8a1 though, so the deprecation is
obsolete.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
mieqProcessInputEvents doesn't process events from MDs anymore, so we don't
need to check for pDev->isMaster.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It almost never is. However, you have _lots_ of input devices now, and
walking them all on every Composite operation is not the cheapest thing
in the world.
Daniel Stone
Tomas Carnecky
Alan Coopersmith
Keith Packard
Chase Douglas
Dave Airlie
Michal Suchanek
Zhigang Gong
Peter Hutterer
Jeremy Huddleston
Matt Turner
Ville Syrjälä
Tiago Vignatti
Erkki Seppälä
Adam Jackson
Pauli Nieminen
Siddhesh Poyarekar
Cyril Brulebois
Jon TURNEY
Jamey Sharp
Jesse Barnes
Mikhail Gusarov
Pierre-Loup A. Griffais
Oliver McFadden
Matthias Hopf
Yaakov Selkowitz
Alan Coopersmith
Jeremy Huddleston
Kevin E Martin
Pierre Willenbrock
David Miller
Eamon Walsh