When RandR 1.2's transformation code is enabled, it rotates the cursor
image so that it appears upright on a rotated screen. This code
completely mangles 2-color cursors on hardware where the the mask and
source images are not interleaved due to two problems:
1. stride is calculated as (width / 4) rather than (width / 8), so the
expression (y * stride) skips two lines instead of one for every
time y is incremented.
2. cursor_bitpos ignores the 'mask' parameter if the hardware doesn't
specify any of the HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_* flags.
To fix this, refactor the code to pass the whole xf86CursorInfoPtr
through to cursor_bitpos and compute the correct stride there based on
the flags. If none of the SOURCE_MASK_INTERLEAVE flags are set, use
the total cursor size to move the 'image' variable into the mask part
of the image before computing the desired byte pointer.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
Add a new hook ModeSet that will be called after display mode is
changed, or after the display has been panned.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
This fixes a gamma issue on vt switch observed with KDM. VT switching away
and back would result in a black screen. Avoid this by storing the current
gamma information on init.
https://bugzilla.redhat.com/show_bug.cgi?id=533217
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When entering the VT, re-apply the saved gamma settings for each screen.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
In all these cases, any rendering implied by this damage has already
occurred, and we want to get the damage out to the client. Some of
the DamageRegionAppend calls were explicitly telling damage to flush
the reportAfter damage out, but not all.
Bug #30260. Fixes the compiz wallpaper plugin with client damage
changed to reportAfter.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL)
- free(E);
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Simple typo, should have been adjusting the horizontal timings
consistently since we're not trying to mangle vertical at all.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Patrick E. Kane <pekane52@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ScrnInfo->pixmapPrivate only existed in order to catch invalid access to
the framebuffer by making the backing data NULL across the VT switch.
This was causing more confusion in the higher layers during mode setting
without any real benefit, so remove it.
v2: Kill ShadowModifyPixmapHeader() as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Julien Cristau <jcristau@debian.org>
Cc: Andrew Guertin <lists@dolphinling.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Program received signal SIGSEGV, Segmentation fault.
0x080d4a2d in xf86RandR12ScreenSetSize (pScreen=0x8dca3a0, width=800,
height=600, mmWidth=210, mmHeight=157)
at ../../../../hw/xfree86/modes/xf86RandR12.c:731
731 ../../../../hw/xfree86/modes/xf86RandR12.c: No such file or directory.
in ../../../../hw/xfree86/modes/xf86RandR12.c
(gdb) bt full
height=600, mmWidth=210, mmHeight=157)
at ../../../../hw/xfree86/modes/xf86RandR12.c:731
randrp = 0x8dcae68
pScrn = 0x8dbeb28
config = <value optimized out>
pRoot = 0x8e08e30
pScrnPix = 0xb6d12008
ret = 1
c = <value optimized out>
mmWidth=210, mmHeight=157) at ../../randr/rrscreen.c:185
No locals.
at ../../randr/rrscreen.c:307
pWin = 0x8e08e30
pScreen = 0x8dca3a0
i = <value optimized out>
rc = 0
../../randr/randr.c:485
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Julien Cristau <jcristau@debian.org>
Tested-by: Julien Cristau <jcristau@debian.org>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Delete time-traveling multiple personality disorder from the server.
Gaetan notes:
There were a couple of drivers containing an unknown version of the
modes/parser code. This was done in server 1.2 time frame because it
was released without mode code. It was barely or not maintained
afterwards. There are currently no video drivers with a copy of the
modes code.
Most of these ifdefs were introduced in commit
a8d760f567, where Aaron wrote,
This change uses XORG_VERSION_CURRENT < 7.0 to mean "server newer
than 1.2" since XORG_VERSION current went backwards at some point.
Alan explains that:
In Xorg 1.3, when we first released an Xorg server release decoupled
from the katamari release schedule. (1.0 through 1.2 were released
as part of X11R7.0 through 7.2, while 1.3 came out between X11R7.2 &
7.3.)
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
When the "Rotate" option isn't specified allow the driver to specify
the initial rotation mode. This way the driver can choose to retain
the same settings that were used by software that was used prior to
starting X.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 77c7a64e88 was introduced to fix
a cursor off by one on Intel hw, however it also move the whole crtc
into an off by one position and you could see gnom-eshell overlapping.
This commit reverts that and instead fixes the cursor hotspot
translation to work like pixman does. We add 0.5 to the cursor vector
before translating, and floor the value afterwards.
Thanks to Soeren (ssp) for pointing out where the real problem was
after explaning how pixman translates points.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When resetting the server, pScrn->EnterVT must be unwrapped or the
next server generation will end up wrapping the wrapper and causing an
infinite recursion on EnterVT.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Michael Stapelberg <michael+freedesktop@stapelberg.de>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
crtc->{x,y} is always 0 when xf86DefaultScreenLimits() is called, so we
calculate too small an area for the initial framebuffer and force a resize
to happen.
This commit fixes the code to use desired{X,Y} instead, which contains the
initial output positions.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
When nothing is connected at startup and we canGrow, allow the server to start with a 1024x768 framebuffer, and when the drivers send hotplug events this will expand to the correct size dynamically.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Setting 'Option "DefaultModes" "No"' in an output will guarantee that
X will omit the default modes, just picking up modes from the
configuration file and modes provided by the output.
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Upon resume, X may try to dereference a null pointer, which has been
reported in Debian bug #507916 (http://bugs.debian.org/507916).
Jim Paris came up with a patch which solves the problem for him. Here's
a (hopefully) fixed version of his patch (without the typo).
Cc: Jim Paris <jim@jtan.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-By: Matthias Hopf <mhopf@suse.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
Banked framebuffers are so 1990. As of 7.4 the only drivers remaining
that used this were chips, neomagic, trident, and vesa. vesa only used
it when not using shadowfb, which is broadly undesirable anyway, and no
longer uses it at all as of 2.3.0. neomagic never used it by default,
and support for it is gone in git master. The other two effectively
only ever used it for ISA chips; since ISA support is now gone from
the server, they have been modified to only compile mibank support when
ISA support is available.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the same fix as was done in
fcdc1d78cc for xf86_use_hw_cursor_argb.
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
When the compat output is missing (I don't think this is actually
possible), or is disabled (and hence has no crtc), we would like to
avoid dereferencing NULL pointers. This patch creates inline functions
to extract the current compat output, crtc or associated RandR crtc
structure, carefully checking for NULL pointers everywhere.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
There were two separate enum definitions, one inside
det_monrec_parameter struct and one for a local variable (which was then
stored inside the struct). Sharing a single definition makes the
code more obviously correct while making the compiler happier.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the user has gone to the effort of manually enabling an output in
the configuration file assume that they know what they're doing.
X.org Bug 14611 <http://bugs.freedesktop.org/show_bug.cgi?id=14611>
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
I ran accross a crash with xf86-video-nv-2.1.15 [1] and xserver
1.7.3.901. It looks like the problem is that gamma_set is called even
if that is NULL.
[1] https://launchpad.net/bugs/494627
Reviewed-By: Matthias Hopf <mhopf@suse.de>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
On Fri, Dec 11, 2009 at 10:19:01AM -0800, Keith Packard wrote:
> On Wed, 9 Dec 2009 11:55:14 +1000, Peter Hutterer <peter.hutterer@who-t.net> wrote:
> > On Tue, Dec 08, 2009 at 05:24:06PM -0800, Aaron Plattner wrote:
> > > On Tue, Dec 08, 2009 at 03:52:27PM -0800, Peter Hutterer wrote:
> > > > Xorg +xinerama crashes immediately due to whacky dependency between Xinerama
> > > > and RandR12. The latter doesn't initialize if Xinerama is enabled, but if
> > > > only one screen is found, Xinerama is disabled again and RandR12 tries to
> > > > access data it never initialized.
>
> I'd sure like to have RandR get enabled when xinerama doesn't; is there
> an easy way of making that happen here? Perhaps having the RandR12 code
> disable Xinerama when only one screen is found? Or some other kludge?
you know the dependency better than I do so any hints are apreciated.
afaict, the screenInfo.numScreens (the check used by Xinerama) isn't
necessarily initialized at this point so we can't use the same check.
The following seems to work though:
From 670b3ebdb7312a6433a8f093d0820785db2aea20 Mon Sep 17 00:00:00 2001
From: Peter Hutterer <peter.hutterer@who-t.net>
Date: Mon, 14 Dec 2009 11:00:58 +1000
Subject: [PATCH] xfree86: if only one screen was found, disable Xinerama (#24627)
Xorg +xinerama crashes immediately due to whacky dependency between Xinerama
and RandR12. The latter doesn't initialize if Xinerama is enabled, but if
only one screen is found, Xinerama is disabled again and RandR12 tries to
access data it never initialized.
Dependency chain is:
- ProcessCommandLine sets noPanoramiXExtension to FALSE
- xf86RandR12Init() is a noop
- PanoramiXExtensionInit sets noPanoramiXExtension to TRUE
- xf86RandR12CreateScreenResources tries to use the devPrivates key it never
initialized.
This hack checks if there's only one screen at the time RandR12 is
initialized. If so, we expect Xinerama to fail anyhow so we disable it
ourselves and proceed as planned.
X.Org Bug 24627 <http://bugs.freedesktop.org/show_bug.cgi?id=24627>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
v1->v2: Make one condition case for one quirk instead of merging them
together. This is based on the Keithp's suggestion.
Move the EDID quirk for Philips LCD LP154W01 as the panel reports the vertical
size in cm.
https://bugs.freedesktop.org/show_bug.cgi?id=24482
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The message ending up in the log is misleading as to what the quirk
actually does: It ignores the sizes in the detailed timings and
replaces them with the display "Max Image Size".
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith has shown half the block handlers wrappers are wrong, also
dynamic wrapping/unwrapping from what I can see will happen after
the drivers, so its really accidental ABI, that we can't change
now without modifing drivers. So be safe for 1.7.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Declared-as-sane-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Removing DGA ended up breaking any drivers calling into the old
xf86DiDGAInit function as it tried to see if DGA was already enabled
and ended up crashing if the VT wasn't completely initialized. Oops.
Also, if the driver initializes DGA itself, have the DiDGA
initialization overwrite that information as the DiDGA code will call
ReInit on mode detect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If either width or height of DisplaySize is invalid, assume that the
configuration is invalid and use the DDC-reported values instead.
See Comment 9, Bug 9758.
http://bugs.freedesktop.org/show_bug.cgi?id=9758#c9
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dave Airlie <airlied@redhat.com>
This removes all rendering and mapping code from xf86DiDGA, leaving
just mode setting and raw input device access. The mapping code didn't
have the offset within /dev/mem for the frame buffer and the pixmap
support assumed that the framebuffer was never reallocated.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The adjusted mode was freed, but any name allocated for that was leaked.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The smart scheduler is designed to minimize scheduler overhead by
increasing the interval between WaitForSomething calls when a single
client is running. However, the software rotation code depends on
its BlockHandler being invoked for screen updates; the long delays
caused by the smart scheduler optimizations means that screen updates
can be delayed a long time as well.
The change is simple -- prevent the smart scheduler from increasing
the scheduling interval while any screen is using software rotation.
Signed-off-by: Keith Packard <keithp@keithp.com>
The rotation block handler uses regular driver rendering functions to
repaint the screen, if those functions queue commands in the driver,
it's important that the driver block handler be invoked after the
rotated image is drawn.
Signed-off-by: Keith Packard <keithp@keithp.com>
xf86_reload_cursors restores the cursor to the correct position, but
that must adjust for cursor hot spot and frame before calling down to
the hardware function, otherwise the cursor jumps to the wrong
position until it is repositioned by the user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes screensaver fadeout effects.
Also make all RandR 1.2 compatibility code for XF86VidMode operate only on the
CRTC associated with the compatibility output, not all CRTCs at once.
xextproto had Xlib client headers moved into libXext.
Protocol header files are named fooproto.h, header files with constants
foo.h or fooconst.h where foo.h was already in use for client-side headers.
crtc->funcs->lock is NULL, so it's no use calling it here. Move it down so
it's actually defined before we use it.
Introduced with 6f59a81600.
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
This moves code out of each implementation of set_mode_major and back into
the X server. The real feature here is that the transform is now available
in the crtc for use by either xf86CrtcRotate or whatever the driver wants to
do. Without this change, the transform was lost for drivers providing the
set_mode_major interface.
Note that users of this API will want to stop smashing the transformPresent
field, and could also stop setting mode/x/y/rotation for new enough X servers,
but there's no reason to make that change as it will break things when
running against older X servers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
If you have multiple cards, some that support randr 1.2 and some that don't
you can get a null dereference in here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make xf86 RANDR wrap the EnterVT call chain, so it can re-probe the
outputs when a laptop comes back from suspend/unsuspend (actually, any
time that we enter our VT again). The X server should then send RR*
events to clients, so they can cope with a monitor that was unplugged
while the laptop was suspended.
Signed-off-by: Federico Mena Quintero <federico@novell.com>
It reports vertical size in cm in the detailed mode.
X.Org bug#21750 <http://bugs.freedesktop.org/show_bug.cgi?id=21750>
Reported-by: Peter Poklop <Peter.Poklop@gmx.at>
Signed-off-by: Julien Cristau <jcristau@debian.org>
This way clients querying the gamma value via the VidMode extension at least
get the last value set via the same, rather than always something bogus.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
The reciprocal gamma value was missed in the first copy and this mistake was
propagated to the second one.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
A driver with this hook will take care of preparing the outputs & crtcs,
so calling the prepare functions will just cause unnecessary flicker.
Fixes bug #21077
This panel reports its vertical size in cm.
X.Org bug#21000 <http://bugs.freedesktop.org/show_bug.cgi?id=21000>
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
There is a separate panning region check, but that doesn't work under
transformation, so just pre-clip the mouse coordinates when computing the
panning offsets. This leaves the case where panning constants are changing
unresolved.
Signed-off-by: Keith Packard <keithp@keithp.com>
When the crtc transformation changes, the entire crtc must be repainted.
This was being done by clearing the shadow and then painting the rectangle
containing the screen image; the clear being required as the screen image
may not fill the crtc. When changing the transform rapidly, this leads to
flashing. Eliminate the clear by painting the entire crtc instead of just
the screen rectangle.
Signed-off-by: Keith Packard <keithp@keithp.com>
All you get for standard timing descriptors is horizontal size in
multiples of 8 pixels (which means you can't say 1366) and height in
terms of aspect ratio (which means you can't say 768). You'd like to
just fuzzy-match this by walking the DMT list for sufficiently close
modes, but you can't because DMT is useless and only defines a 1360x768
mode, because it's _also_ specified in terms of character cells despite
providing pixel exact timings. Neither can you use CVT or GTF to
generate the timings, because they _also_ believe that modes have to be
a multiple of 8 pixels.
You'd also hope you could find a timing definition for this in CEA, but
you can't because CEA only defines transmission formats that actually
exist. So there's 480p, 720p, and 1080p, but no 768p. And why would
there be, after all, the encoded signal is never 768p so obviously no
one would ever make a display in that format.
So instead, make a CVT mode since that's likely to be handled well by
just about everything, smash the horizontal active down by 2, and shift
the sync pulse by 1. Underscanning the hard way.
Pass the suicide.
Otherwise drivers have to refuse interlace twice: once in the output
config, and once in ->valid_mode() to catch output and config modes.
If you can't do interlaced modes, asking nicely for it in the config
isn't going to suddenly make it work.
This patch gets the shadow scanout buffer repainted on panning area changes.
It does not, however, track the mouse correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
When the shadow scanout buffer can be re-used, the underlying framebuffer
area must be damaged so that the scanout will be repainted. This patch
delays the addition of that damaged area until after the transform in the
crtc has been updated, otherwise the old transform would have been used and
the wrong area repainted.
Signed-off-by: Keith Packard <keithp@keithp.com>
Drivers not using the new hw/xfree86/modes code would crash in DRI due to
that code trying to monitor CRTC changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
We report the EDID values in RandR, and we let people configure whatever
they like for the screen in xorg.conf. Reporting the EDID values in the core
means applications get inconsistent font sizes in the default configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously it is possible that creating rotation data, then cleaning
up and creating again so that pScreen->BlockHandler and
xf86_config->BlockHandler all point to xf86RotateBlockHandler.
See bug #19343.
